Volume 40, Issue 2 (Journal of Advanced Materials-Summer 2021)
2021, 40(2): 31-45 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Sarafrazian S, Tavoosi M, Ghasemi A. THE EFFECT OF ANNEALING ON MAGNETIC PROPERTIES OF MELT SPUN ND2FE14B INTERMETALLIC ALLOY. Journal of Advanced Materials in Engineering (Esteghlal) 2021; 40 (2) :31-45
URL: http://jame.iut.ac.ir/article-1-1096-en.html
URL: http://jame.iut.ac.ir/article-1-1096-en.html
Department of Materials Engineering, MalekAshtar University of Technology, Iran , ma.tavoosi@gmail.com
Abstract: (1899 Views)
The aim of this study was optimization of the annealing process in melt spun Nd2Fe14B intermetallic magnetic alloy. In this regard, the melt spinning process was done at wheel speed of 40 m.s-1. In order to achieving the desired microstructure, the as-spun ribbons were subsequently annealed at temperature range of 500 to 700 ºC for different periods of time. Structural and magnetic characterization of produced samples were performed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). The results showed that the structure of as-spun ribbons at wheel speed of 40m.s-1 was composed of Fe-α, Nd2Fe14B and amorphous phases with the coercivity and saturation of magnetization in the range of 0.14 kOe and 120 emu/g, respectively. By annealing the produced ribbons and crystallization of the amorphous phase, the percentage of Fe-α and Nd2Fe14B was decreased and increased, respectively. The optimum annealing conditions for achieving the highest value of coercivity (about 9.2 kOe) was 600°C for 6h.
Type of Study: Research |
Subject:
Electronic and magnetic materials
Received: 2020/08/5 | Accepted: 2021/06/7 | Published: 2021/09/1
Received: 2020/08/5 | Accepted: 2021/06/7 | Published: 2021/09/1
Send email to the article author
