Volume 40, Issue 3 (Journal of Advanced Materials-Fall 2021)                   2021, 40(3): 61-78 | Back to browse issues page


XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Fareghdeli F, Karimi M, Novin A, Solati-Hashjin M. EFFECT OF TEMPERATURE AND TIME ON THE HOMOGENEITY OF POLYLACTIC ACID /HYDROXYAPATITE COMPOSITES FOR BONE SCAFFOLDS. Journal of Advanced Materials in Engineering (Esteghlal) 2021; 40 (3) :61-78
URL: http://jame.iut.ac.ir/article-1-1115-en.html
Department of Biomedical Engineering, Amirkabir University, Tehran, Iran , solati@aut.ac.ir
Abstract:   (1869 Views)
One challenge in preparing polymer/ceramic composites is non-uniform ceramic particles distribution in a polymer matrix. This research evaluated the effect of stirring time and temperature on hydroxyapatite (HA) distribution through (polylactic acid) PLA matrix. Therefore, to mix the ceramic suspension with the polymer solution, three temperatures, namely 25, 37, and 45°C and four times including 6, 12, 24 and, 48 h were examined. Fourier-transform infrared spectroscopy (FTIR) analysis was used to investigate the bonds, which showed physical bond formation such as carboxyl-calcium-carboxyl between HA and polymer matrix, influenced on particles distribution. Scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS) were used to observe particles distribution and determine samples homogeneity. To fulfill this goal, each obtained photograph representing the calcium presentation was split into nine equal sections, and a method based on the newly defined index called dispersion factor “α” was used to analyze the distribution. Results showed that the sample prepared at 37°C and 48 h had the topmost homogeneity properties.
Full-Text [PDF 1749 kb]   (652 Downloads)    
Type of Study: Research | Subject: Composites
Received: 2020/11/11 | Accepted: 2021/09/13 | Published: 2021/11/1

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


© 2024 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb