Volume 40, Issue 3 (Journal of Advanced Materials-Fall 2021)
2021, 40(3): 1-16 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Verdi P, Monirvaghefi S M, Ashrafizadeh F. ELECTROLESS Ni-P COATING VIA THE NOVEL SUBSTRATE LOCAL HEATING (HOT SUBSTRATE) TECHNIQUE. Journal of Advanced Materials in Engineering (Esteghlal) 2021; 40 (3) :1-16
URL: http://jame.iut.ac.ir/article-1-1158-en.html
URL: http://jame.iut.ac.ir/article-1-1158-en.html
Materials Engineering Group, Pardis College, Isfahan University of Technology , p.verdi@pa.iut.ac.ir
Abstract: (2132 Views)
Regarding to the low rate of conventional Ni-P electroless plating method that needs more time to make a coating on the substrate surface, a new technique called “substrate local heating” was introduced based on the temperature parameter modification and its advantages were expressed and compared to the conventional electroless plating technique (temperature=90°C, pH=4.7). In order to provide necessary equipment making this approach practicable, electrical resistance was used as the heating source, and air injection and cooling water circulation were employed to control the solution temperature near the substrate and in the bulk solution, respectively. Considering the heater power (1000 W), the substrate and bulk temperatures were about 190°C and 80°C, respectively. This novel method could enhance the plating rate up to 32 µm/h which was about 60% greater than that of the conventional method, 20 µm/h. Moreover, benefits such as local plating, reduction of production costs, and formation of functionally graded coatings (FGC) can be achieved.
Keywords: Electroless, Nickel-Phosphorus coating, Water circulation, Plating rate, Substrate local heating.
Type of Study: Research |
Subject:
Surface engineering and coatings
Received: 2021/03/7 | Accepted: 2021/07/10 | Published: 2021/11/1
Received: 2021/03/7 | Accepted: 2021/07/10 | Published: 2021/11/1
Send email to the article author
