Volume 17, Issue 2 (4-1998)
1998, 17(2): 97-108 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
S. Hossain-Pour and M. Farschi. Determination of BKW Equation of State Parameters via Measurement of the Detonation Velocity in Condensed Explosives. Journal of Advanced Materials in Engineering (Esteghlal) 1998; 17 (2) :97-108
URL: http://jame.iut.ac.ir/article-1-139-en.html
URL: http://jame.iut.ac.ir/article-1-139-en.html
Abstract: (10190 Views)
An optical system has been redesigned and used to measure detonation velocity as a function of condensed explosive density for RDX, HMX, PETN. These measurements are then used to determine and fine tune parameters appearing in the BKW (Beker-Kistiakowsky-Wilson) equation of state for gases at extremely high pressures. Steady state form of conservation equations along with the BKW state equation and the Chapman-Jouquer hypothesis are used to determine the detonation velocity and the thermodynamic state of the gas behind the detonation front. An iterative scheme is used to adjust the BKW equation parameters such that the calculated detonation velocities, obtained from the solution of the above set of equations, match the measured values.
