Volume 21, Issue 1 (7-2002)                   2002, 21(1): 195-206 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

S. Aminorroaya and H. Edris. The Effect of Foamy Slag on Power Consumption in Electric Arc Furnaces. Journal of Advanced Materials in Engineering (Esteghlal) 2002; 21 (1) :195-206
URL: http://jame.iut.ac.ir/article-1-248-en.html
Abstract:   (8244 Views)
In electric arc furnace steelmaking units, the essential parameters are reducing price, increasing production and decreasing environmental pollution. Electric arc furnaces are the largest users of electric energy in industry. The most important techniques that can be used to reduce the electric energy consumption in electric arc furnaces are scrap preheating, stirring, use of burners and hot charge and foamy slag. Between these methods, the use of foamy slag is the most useful and economical factor. Foamy slag can reduce the amount of energy, electrodes, refractory consumption, and tap to tap time while it also increases productivity. In this study, method of production and optimum conditions for foamy slag in a 200-ton electric arc furnace were investigated. The use of foamy slag in this research can reduce the electric energy consumption from 670 to 580 kwh/t and the melting time from 130 to 115 min. and that the electric power input can be increased. It also shows that with foamy slag, the optimum amount of FeO in slag is 20-24 percent and the optimum basicity is 2-2.2. Keywords: electric arc furnace, energy, DRI, foamy slag
Full-Text [PDF 696 kb]   (1803 Downloads)    
Type of Study: Research | Subject: General
Received: 2014/10/25 | Published: 2002/07/15

Add your comments about this article : Your username or Email:
CAPTCHA

© 2024 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb