Volume 23, Issue 2 (1-2005)
2005, 23(2): 173-184 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
K. Raeissi, A. Saatchi and M. A. Golozar. Effect of Current Density and Surface Preparation of Steel on Morphology and Texture of Zinc Electrodeposits. Journal of Advanced Materials in Engineering (Esteghlal) 2005; 23 (2) :173-184
URL: http://jame.iut.ac.ir/article-1-325-en.html
URL: http://jame.iut.ac.ir/article-1-325-en.html
Abstract: (7133 Views)
On electropolished steel at low current densities, morphology and texture of electrodeposited zinc were investigated. Zinc coating is consisted of hexagonal crystallites laid on each other to produce packets. These packets are of different sizes and are stacked in different orientations to construct a homogeneous coating on steel substrate. This coating does not have texture, i.e., it has a random texture. With increasing current density, the morphology changes completely as each grain attains a special orientation. In this case, coating has a strong basal plane (0002) along with low angle planes (1013 and 1014). Coating obtained on mechanically polished surfaces consists of individual packets of zinc crystals, which are near each other with different
orientations. These coatings have a higher density of basal plane (0002) in comparison to electropolished surfaces. The morphology and texture variations with cathodic polarization and surface preparation of steel are due to their effect on nucleation and growth.
Keywords: Morphology, Texture, Zinc Coating, Electrodeposition, Polarization, Electropolished, Mechanically polished
