Volume 24, Issue 1 (7-2005)
2005, 24(1): 283-297 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
M. Salimi and S. Asghari. Investigations on Cold Rolling of Strip in Attendance of Hydrodynamic Lubrication. Journal of Advanced Materials in Engineering (Esteghlal) 2005; 24 (1) :283-297
URL: http://jame.iut.ac.ir/article-1-345-en.html
URL: http://jame.iut.ac.ir/article-1-345-en.html
Abstract: (5718 Views)
In this paper an analytical model for cold rolling of strip has been described. This model is developed based on the slab method of analysis and the hydrodynamic lubrication. The characteristics of rolling are obtained from the equations of equilibrium and the plate was allowed to strain harden assuming that the lubricant behaves as a Newtonian fluid. The shear stress to the plate is obtained by calculating the thickness of the lubricant film by employing a viscosity-pressure-temperature relation. The governing equations are obtained by composing these relations and the final differential equations have been solved. From the solution of the final equation, the rolling force، torque and shear stress to the plate are calculated. To verify the validity of
the proposed model, these values are compared with experimental and analytical results of other investigators. It was also noted that by employing the proposed analytical model, a large amount of computation time and costs are saved
