Volume 29, Issue 1 (Jun 2010)                   2010, 29(1): 9-19 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

A. Samadi, A. Abdollah-zadeh, S.H. Razavi, H. Assadi. The effect of cooling rate on the precipitation of γ′ in Ni-11.6 at.%Al alloy. Journal of Advanced Materials in Engineering (Esteghlal) 2010; 29 (1) :9-19
URL: http://jame.iut.ac.ir/article-1-507-en.html
Faculty of Materials Engineering, Sahand University of Technology , samadi@sut.ac.ir
Abstract:   (6761 Views)
The initial stages of the  precipitation in a dilute Ni-Al binary alloy, Ni-11.6 at.%Al, were studied using differential scanning calorimetry (DSC), X-ray diffraction (XRD), electron diffraction and electron microscopy (FEG-SEM and TEM) techniques. Three samples were similarly solution treated and then cooled to room temperature under different cooling rates, 170، 25 and 0.03oCs-1. The results indicate a clearly homogenous  nucleation during rapid quenching which takes place via simultaneous ordering and phase separation. However, by decreasing the cooling rate to 25oCs-1 the nucleation mechanism changes to heterogeneous on the preferred nucleation sites. The capability of the mentioned empirical techniques for studying the initial stages of the γ′ is another subject which is studied in this article.
Full-Text [PDF 866 kb]   (1813 Downloads)    
Type of Study: Research | Subject: General
Received: 2015/02/9 | Accepted: 2015/05/5 | Published: 2015/05/5

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


© 2024 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb