Volume 30, Issue 1 (Jun 2011)
2011, 30(1): 25-41 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
S. Vaezifar, H. Faghihian, M. Kamali. Synthesis of Isobutane Dehydrogenation Catalyst Based on Nanopore Zeolite Y and its Performance Compared with Industrial Catalyst. Journal of Advanced Materials in Engineering (Esteghlal) 2011; 30 (1) :25-41
URL: http://jame.iut.ac.ir/article-1-519-en.html
URL: http://jame.iut.ac.ir/article-1-519-en.html
Department of Materials Engineering, Isfahan University of Technology , s.vaezifar@fadakgroup.ir
Abstract: (7031 Views)
DP803, an industrial catalyst used in petrochemical industry for dehydrogenation of isobutane to isobutene, was characterized in the current study. The results showed that zeolite Y is a high performance catalyst. This catalyst was then synthesized using a platinum source (hexachloro platinic acid) and two different tin sources (tributyl tin chloride and SnCl2.2H2O) all on zeolites Y, and then the synthesized catalysts were used in the dehydrogenation of isobutane in a reactor designed for dehydrogenation reaction. XRF, XRD, TG/DTG, FT-IR, and SEM techniques were used for the characterization and determination of the composition of catalysts. The wet analysis of samples under different reaction conditions were investigated as well.
Type of Study: Research |
Subject:
General
Received: 2015/02/9 | Accepted: 2015/05/5 | Published: 2015/05/5
Received: 2015/02/9 | Accepted: 2015/05/5 | Published: 2015/05/5
Send email to the article author
