Volume 33, Issue 3 (Journal of Advanced Materials- winter 2015)
2015, 33(3): 1-11 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
reza eshghi, s.m.hadavi, v.varmazyar. Investigation of Mechanical Properties in Brazing of Ti-6Al-4V and SS410 in Vacuum. Journal of Advanced Materials in Engineering (Esteghlal) 2015; 33 (3) :1-11
URL: http://jame.iut.ac.ir/article-1-593-en.html
URL: http://jame.iut.ac.ir/article-1-593-en.html
, reza412_eshghi@yahoo.com
Abstract: (7939 Views)
In this research, Ti-6Al-4V alloy was brazed with 410 stainless steel by three different filler metals as silver-base,
nickel-base, and titanium-base alloys. In order to obtain optimum clearance, brazing was done in three different clearances
of 0.02, 0.04 and 0.06 mm. Also, the strength and hardness of the brazing zone were investigated. The results of shear strength
showed that the brazed samples with titanium-base alloy at the clearance of 0.02 mm had the maximum strength among the
different samples which was 149.5 MPa.
Type of Study: Research |
Subject:
General
Received: 2015/03/11 | Accepted: 2015/03/11 | Published: 2015/03/11
Received: 2015/03/11 | Accepted: 2015/03/11 | Published: 2015/03/11
Send email to the article author
