Volume 34, Issue 2 (Journal of Advanced Materials- Summer 2015)
2015, 34(2): 103-113 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Rajabi M, Sedighi R A, Rabiee S M. Characterization of Nanonanocrystalline Mg-6Al-1Zn-1Si Alloy Powder During Mechanical Alloying and Subsequent Annealing. Journal of Advanced Materials in Engineering (Esteghlal) 2015; 34 (2) :103-113
URL: http://jame.iut.ac.ir/article-1-673-en.html
URL: http://jame.iut.ac.ir/article-1-673-en.html
Noshirvani University of Technology, Babol, Iran , m.rajabi@nit.ac.ir
Abstract: (12092 Views)
In this study, the effect of mechanical alloying on the microstructure and phase constituents of Mg-6Al-1Zn-1Si system was investigated. To understand the thermal behavior, isothermal annealing was performed at three different temperatures of 350, 400 and 450 °C for 1h. The results showed the grain size initially decreases with increasing the milling time up to 35h and then slightly increases. In contrast, the lattice strain increases sharply with increasing the milling time up to 35h and then decreases. Second-phase intermetallic particle Mg2Si was produced during annealing and the amount of this phase was increased with increasing annealing temperature. The mechanical alloying process decreased the formation temperature of Mg2Si.
Type of Study: Research |
Subject:
Surface engineering and coatings
Received: 2015/09/2 | Accepted: 2015/09/2 | Published: 2015/09/2
Received: 2015/09/2 | Accepted: 2015/09/2 | Published: 2015/09/2
Send email to the article author
