Volume 36, Issue 4 (Journal of Advanced Materials-Winter 2018)
2018, 36(4): 1-20 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Rashtchi H, Shamanian M, Raeissi K. Electroplating of Ni-Mo Coating on Stainless Steel for Application in Proton Exchange Membrane Fuel Cell Bipolar Plate. Journal of Advanced Materials in Engineering (Esteghlal) 2018; 36 (4) :1-20
URL: http://jame.iut.ac.ir/article-1-761-en.html
URL: http://jame.iut.ac.ir/article-1-761-en.html
Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran. , h.rashtchi@gmail.com
Abstract: (11520 Views)
Stainless steel bipolar plates are preferred choice for use in Proton Exchange Membrane Fuel Cells (PEMFCs). However, regarding the working temperature of 80 °C and corrosive and acidic environment of PEMFC, it is necessary to apply conductive protective coatings resistant to corrosion on metallic bipolar plate surfaces to enhance its chemical stability and performance. In the present study, by applying Ni-Mo and Ni-Mo-P alloy coatings via electroplating technique, corrosion resistance was improved, oxid layers formation on substrates which led to increased electrical conductivity of the surface was reduced and consequently bipolar plates fuction was enhanced. Evaluation tests included microstructural and phase characterizations for evaluating coating components; cyclic voltammetry test for electrochemical behavior investigations; wettability test for measuring hydrophobicity characterizations of the coatings surfaces; interfacial contact resistance measurements of the coatings for evaluating the composition of applied coatings; and polarization tests of fuel cells for evaluating bipolar plates function in working conditions. Finally, the results showed that the above-mentioned coatings considerably decreased the corrosion and electrical resistance of the stainless steel.
Keywords: PEM fuel cell, Bipolar plate, Ni-Mo coatings, Electroplating, Wettability, Polarization test.
Type of Study: Research |
Subject:
Surface engineering and coatings
Received: 2016/04/6 | Accepted: 2016/11/23 | Published: 2018/02/28
Received: 2016/04/6 | Accepted: 2016/11/23 | Published: 2018/02/28
Send email to the article author
