Volume 36, Issue 4 (Journal of Advanced Materials-Winter 2018)                   2018, 36(4): 89-103 | Back to browse issues page


XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Bakhshi M H, Zakeri A. Electrowinning of Nickel from Dilute Sulfate Solution. Journal of Advanced Materials in Engineering (Esteghlal) 2018; 36 (4) :89-103
URL: http://jame.iut.ac.ir/article-1-770-en.html
Metal Extraction Research Laboratory, School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Tehran, Iran , zakeria@iust.ac.ir
Abstract:   (8602 Views)
Electrowinning is one of the methods for recovery of nickel metal from pregnant leach solutions. In industrial practice, the Ni content in electrolytes is usually above 80 g/L. However, many nickel solutions obtained from processing of secondary nickel resources are much less concentrated and this makes the electrowinning of such solutions difficult. In the present study, Nickel electrowinning from 30 g/L sulfate solutions has been investigated and the effect of the parameters such as current density (CD), temperature (T) and boric acid concentration (BA) on the current efficiency and nickel deposit quality has been determined using a central composite design methodology. The statistical analysis of experimental results revealed the significant factors and a proper model was obtained for each response variable. The results revealed two important negative interaction effects of T´BA and CD´BA which means that increasing temperature and current density could result in a higher current efficiency and satisfactory Ni deposit quality only at lower boric acid concentrations. By using overlaid contour plot method for multiple response optimization, the optimum condition for attaining current efficiencies of >95% and a smooth  and compact Ni deposit quality was determined as CD = 2-2.5 A/dm2, T = 25-30 °C, and BA = 10 g/L.
Full-Text [PDF 563 kb]   (4877 Downloads)    
Type of Study: Research | Subject: Extractive metallurgy
Received: 2016/05/16 | Accepted: 2017/09/6 | Published: 2018/02/28

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


© 2024 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb