Volume 41, Issue 1 (Journal of Advanced Materials-Spring 2022)
2022, 41(1): 19-35 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Rezvani M H, Yeganeh M, Lari Baghal S M. INVESTIGATION OF THE ADDITION OF METHIONINE ON THE CORROSION OF 316L STAINLESS STEEL FABRICATED BY SLM METHOD IN SULFURIC ACID MEDIA. Journal of Advanced Materials in Engineering (Esteghlal) 2022; 41 (1) :19-35
URL: http://jame.iut.ac.ir/article-1-1164-en.html
URL: http://jame.iut.ac.ir/article-1-1164-en.html
Shahid Chamran University of Ahvaz, Department of Materials Engineering , m.lari@scu.ac.ir
Abstract: (1178 Views)
In this study, the addition of organic methionine inhibitor (as an eco-friendly inhibitor) to 0.1 M sulfuric acid media on corrosion resistance of 316L austenitic stainless steel (fabricated by rolling method and three-dimensional (3D) printing method) was investigated. Open-circuit potential electrochemical test and impedance, and structural tests such as optical and electron microscopy and x-ray photoelectron spectroscopy were conducted. The results showed that the corrosion resistance in the presence of inhibitor was higher than the sample without inhibitor and the inhibitory efficiency of methionine was increased up to 64% and the resistance to surface transfer between metal oxide and electrolyte was improved up to 2.77 times. The addition of methionine reduced the surface roughness and accumulation of the surface cavities. The chemical and physical adsorption mechanism of the inhibitor (negatively charged side adsorption of the methionine molecule with positively charged anodic regions of the metal surface) occurred at all points on the surface of the sample with the inhibitor. Also, the amount of oxygen in the cavities was reduced and the distribution of sulfur was uniform. The thickness of the passivator oxide layers was calculated more than the sample without inhibition due to the addition of inhibitor.
Type of Study: Research |
Subject:
Corrosion and degredation of materials
Received: 2021/05/4 | Accepted: 2022/04/18 | Published: 2022/08/1
Received: 2021/05/4 | Accepted: 2022/04/18 | Published: 2022/08/1
Send email to the article author
