Search published articles


Showing 2 results for Seyyed Afghahi

S. S. Seyyed Afghahi, M. Jafarian, M. Salehi,
Volume 35, Issue 3 (Journal of Advanced Materials-Fall 2016)
Abstract

In this research, investigation of the microstructure and magnetic properties of doped barium hexaferrite with cobalt, chromium and tin with BaCoxCrxSnxFe12-3xO19 (x=0.3,0.5) formula, was performed using solid state method. Phase and structural investigation by X-ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) Spectroscopy respectively, confirmed the formation of barium hexaferrites single phase without the presence of non-magnetic secondary phase after heat treatment for 5 h at temperature of 1000 °C. Also, according to scanning electron microscopy (SEM) images, morphology of particles was perfectly hexagonal with average particle size 200-250 nm. Based on magnetic parameters measured by Vibrating Sample Magnetometer (VSM), both samples were soft magnetic and the highest saturation magnetization was obtained for the sample with composition of BaCo0.3Cr0.3Sn0.3Fe11.1O19. The values of saturation magnetization (Ms) and the coercivity (Hc) were 42.21 emu/g and 656 Oe respectively for this compound.


S. S. Seyyed Afghahi, M. Jafarian,
Volume 36, Issue 1 (Journal of Advanced Materials-Spring 2017)
Abstract

In this study, the effect of Fe/Ba molar ratio was investigated on the phase composition, synthesis temperature, microstructure and magnetic properties of barium hexaferrite prepared via mechanical activation. In order to synthesize this compound, Fe/Ba molar ratios of 12 and 6 were used. The effect of Fe/Ba molar ratio, milling time and heat treatment temperature for achieving the optimal conditions in producing this compound was studied. In order to study the phase, morphology and magnetic properties of the final product, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Vibrating Sample Magnetometer (VSM) were used respectively. According to the results, Fe/Ba molar ratio of 6, 10 h milling time and temperature of 800 °C were found to be the optimal conditions for producing this compound in a single phase. Scanning electron microscopy images show the hexagonal morphology and almost spherical particles respectively for samples prepared with Fe/Ba molar ratio equal to 12 and 6. Moreover, according to the magnetic studies, the maximum amount of saturation magnetization (56.48 emu/g) and the coercivity force (5247.2 Oe) were obtained for the sample synthesized with Fe/Ba molar ratio of 6.
 



Page 1 from 1     

© 2024 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb