Showing 5 results for Bioactivity
M .kharaziha, M.h. Fathi,
Volume 29, Issue 1 (6-2010)
Abstract
In this study, forsterite nanopowder was prepared by mechanical alloying and post-heat treatment method. Bioactive properties of forsterite nanopowder were studied by immersing the powder in the SBF. Nanostructure forsterite bulk dense form was prepared by the two step sintering method. It was found that pure forsterite nanopowder with 25-60nm particle size was produced. The results of soaking of forsterite nanopowder in the SBF showed that forsterite nanopowder is bioactive. Also, forsterite dense bulk with the optimal hardness of 940 Hv and fracture toughness of 3.61 MPa.m1/2 was produced. These findings suggest that forsterite nanostructure ceramics possess good biocompatibility, bioactivity and mechanical properties and could be suitable for orthopedic and dental implant materials.
H. Edris , M. H. Fathi,
Volume 29, Issue 2 (12-2010)
Abstract
Fabrication of biomaterials with ability to form a bond with bone tissue for bone skeletal system repair is one of the biomaterial science aims. Bioactive glasses containing CaO-SiO2-P2O5 are among the most important groups used in biomedicine and dentistry such as bone defect repair and maxillo-facial reconstruction. The aim of this work was preparation and characterization of nano particle bioactive glass with optimum bioactivity. Bioactive glasses with three different compositions (45S, 49S and 58S) were prepared via sol- gel technique. X- ray diffraction (XRD) technique and X- ray fluorescent (XRF) method were utilized for the phase analysis and also to investigate the chemical composition of the obtained bioactive glass nanopowders. Transmision electron microscopy (TEM) and Scanning electron microscopy (SEM) were utilized to study the structure, morphology and particle size of synthesized bioactive glass nanopowders. In order to investigate the bioactivity, the prepared bioactive glasses were immersed in the simulated body fluid (SBF) solution at 37◦C for 30 days. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) were utilized to recognize and confirm the apatite layer on the prepared bioactive glass nanopowders. TEM images showed that the prepared bioactive glasses had the particle sizes less than 100 nanometers. SEM, FTIR and XRD confirmed the formation of bone-like apatite layer formed on the bioactive glass nanopowders surface, confirming the bioactivity of synthesized bioactive glass nanopowders. It was concluded that the amount of apatite on the 45S bioactive glasse was greater in comparison with 49S and 58S bioactive glasses. It is notable that by optimizing the chemical composition, bioactive glass nanopowder could be used in applications such as repair of bone defects and bone replacement.
M.h. Fathi, A. Hanifi, S.i. Roohani Esfahani,
Volume 30, Issue 2 (12-2011)
Abstract
Due to its biocompatibility, bioactivity and high durability properties, hydroxyapatite (HA) has a wide range of applications in medical cases such as bone defect treatment and bone tissue regeneration. Biological apatite as the most important integrity of the mineral part of hard tissues consists of tiny hydroxyapatite crystals in nanoregime. It seems that using the artificial hydroxyapatite with similar structure and chemical composition to biological apatite could increase its durability inside the natural hard tissues. The aim of the present work was the synthesis of nano structured hydroxyapatite via different routes, comparison of their characterization and enhancement of the bioactivity and bioresorbability of prepared hydroxyapatite by controlling its crystal size and chemical composition. Nano structured hydroxyapatite was prepared by mechanical activation and sol-gel routes. X-ray diffraction technique (XRD), Fourier transform infra red spectroscopy (FTIR) and transmission electron microscopy (TEM) were used to characterize the prepared hydroxyapatite powders. The synthesized powder was soaked in simulated body fluid (SBF) for various periods of time in order to evaluate its bioresorbability and bioactivity after immersion in SBF. Atomic absorption spectroscopy (AAS) was used to determine the dissolution rate of calcium ions in SBF media. Results showed that the mechanical activation prepared HA powder had nano scale structure with mean size of 29 nm and the sol gel prepared HA powder had nano scale structure with mean size of 25 nm. Ionic dissolution rate of prepared nano structured powders was higher than the conventional HA (with micron size) and were similar to biological apatite. It could be concluded that bioactivity behavior of hydroxyapatite powder is affected by its crystalline size. By using the nano structure HA powder with less than 50 nm crystalline size, the optimum bioactivity and bioresorbability would be achieved.
F.s. Sayyedan, M.h. Fathi, H. Edris, A. Doostmohamadi, V.s., Mortazavi, F. Shirani,
Volume 33, Issue 3 (3-2015)
Abstract
The objective of this study was to synthesize glass ionomer–forsterite nanocomposite and study the effect of
incorporating forsterite nanoparticles to the ceramic part of glass ionomer cement in order to improve mechanical properties and
bioactivity. So, Forsterite nanoparticles were made by the sol-gel process using different weight percentages added to the ceramic
part of commercial GIC (Fuji II GC). X-ray diffraction (XRD) was used in order to characterize and determine grain size of the
produced forsterite nanopowder. In order to study the mechanical properties of the produced glass ionomer cement-forsterite
nanocomposite, the compressive strength (CS), three-point flexural strength (FS) and diametral tensile strength (DTS) of
specimens were measured. Statistical analysis was done by one Way ANOVA and differences were considered significant if
P‹0.05. The morphology of fracture surface of specimens was studied using scanning electron microscopy (SEM) technique.
Bioactivity of specimens was investigated by Fourier transitioned-infrared spectroscopy (FTIR), scanning electron microscopy
(SEM), and Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). The results of XRD analysis confirmed the
nanocrystalline and pure forsterite synthesis. According to the mechanical properties measurements, the optimum weight
percentages of forsterite nanoparticles for enhancement of CS, FS, and DTS were obtained equal to 3, 1 and 1 wt.%, respectively.
Statistical analysis showed that the differences between all the groups were significant (P<0.05). SEM images and results of the
ICP-OES and FTIR tests confirmed the bioactivity of the nanocomposite. Glass ionomer-forsterite nanocomposite containing 1 to
3 wt.%-forsterite nanoparticles can be a suitable candidate for dentistry and orthopedic applications due to the improvement of
mechanical properties and bioactivity.
F. Soleimani, R. Emadi,
Volume 38, Issue 3 (12-2019)
Abstract
In this study, polycaprolactone/chitosan/1% baghdadite composite coating was applied on anodized AZ91 alloy to improve the corrosion rate of AZ91 alloy in simulated body fluid (SBF) solution for long immersion times, control its degradability and enhance its bioactivity. By applying the composite coating and after seven days of immersion in a phosphate buffer solution, the corrosion rate decreased from 0.21 mg/h.cm2 (for AZ91 sample) to 0.1 mg/h.cm2 (for anodized AZ91 sample). Formation of apatite layer on the surface of specimens is considered a criterion for bioactivity. In order to evaluate the ability of specimens to get covered by an apatite, the SBF test was used. Application of the composite coating yielded the highest ability for apatite formation, controlled release of ions, and the lowest corrosion rate in the SBF so that it could be considered a good choice for bone implants.
