Search published articles


Showing 2 results for Magnesium Alloys

M. Rajabi, R. A. Sedighi , S. M. Rabiee,
Volume 34, Issue 2 (7-2015)
Abstract

In this study, the effect of mechanical alloying on the microstructure and phase constituents of Mg-6Al-1Zn-1Si system was investigated. To understand the thermal behavior, isothermal annealing was performed at three different temperatures of 350, 400 and 450 °C for 1h. The results showed the grain size initially decreases with increasing the milling time up to 35h and then slightly increases. In contrast, the lattice strain increases sharply with increasing the milling time up to 35h and then decreases. Second-phase intermetallic particle Mg2Si was produced during annealing and the amount of this phase was increased with increasing annealing temperature. The mechanical alloying process decreased the formation temperature of Mg2Si.
B. Pourbahari, H. Mirzadeh, M. Emamy,
Volume 37, Issue 4 (3-2019)
Abstract

Microstructural evolutions during the high-temperature annealing of Mg alloys containing Al and Gd and after the extrusion process were evaluated and compared to those of the AZ61 alloy. It was revealed that during exposure at the elevated temperatures, the presence of (Mg,Al)3Gd phase, in the form of fine and dispersed particles in the matrix after the extrusion process, could be favorable for the inhibition of grain growth. It was also found that the Al2Gd particles could not effectively retard the coarsening of grains. On the other hand, the grain growth of AZ61 alloy was found to be problematic, which was related to the dissolution of the Mg17Al12 intermetallic phase at temperatures higher than 300°C. In the Mg alloys containing both Al and Gd elements, the increased thermal stability was observed, which was ascribed to the rise of the melting temperature. Finally, some abnormal grain growth was observed in the presence of Al2Gd phase, which was attributed to the nonuniform pinning of grain boundaries by this intermetallic compound.
 


Page 1 from 1     

© 2024 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb