Showing 19 results for Magnetic Properties
A. M. Molavi, S. M. Mirkazemi, A. Beitollahi,
Volume 32, Issue 1 (6-2013)
Abstract
The effects of temperature, time and atmosphere on microstructure and magnetic properties of NiFe2O4 glassceramic were investigated utilizing differential thermal analysis, X-ray diffraction, vibrating sample magnetometer and scanning electron microscope techniques. Various compositions were studied in the Na2O-NiO-Fe2O3-B2O3-SiO2 system to obtain amorphous phase. The sample heat-treated in graphite bed at 510°C for 1 hr showed higher magnetization than the one heattreated in the air under the same condition. XRD analysis showed the presence of nickel ferrite and some non-magnetic phases such as sodium borate and silicate phases in the heat treated samples. The maximum magnetization of samples reduced by increasing the holding time from 1hr to 3 hr at 510°C. Increment of temperature to 700°C increased the amount of NiFe2O4 and maximum magnetization.
G. Ahmadpour, A. Ghasemi, E. Paimozd,
Volume 32, Issue 2 (12-2013)
Abstract
The particles of ferrite Ni0.6-xCuxZn0.4Fe2O4, (0-0.5 in step with 0.1) were prepared by the sol-gel method. Sintering process of powders was carried out at 600, 800 and 1000 oC. The effect of the sintering temperature and chemical composition on the structural and magnetic properties of the Cu substituted NiZn ferrite was investigated. EDS analysis and X-ray diffraction patterns confirmed a well defined of single crystal phase with spinel structure. The thermal behavior process and particle size of samples were investigated by thermal analysis TG, DTA techniques and scanning electron microscope, respectively. VSM curves reveal that the sintering temperature and copper content affect saturation magnetization. M ssbauer spectra displays that the copper cations occupy the octahedral sites. With increasing of copper cations, the iron cations immigrate to tetrahedral site, consequently the saturation magnetization decrease.
M. Yousefi, S. Sharafi,
Volume 33, Issue 1 (7-2014)
Abstract
Fe-Co alloys have unique magnetic applications. Fe50Co50 alloy has the highest saturation magnetization value among Fe-Co alloys. Moreover, the introduction of Si into Fe can result in a decrease of magnetic anisotropy. In this study, in order to utilize combined advantages of Si and Co, the effect of adding 10 and 20 at.% Si on the microstructural and magnetic properties of Fe65Co35 alloy was investigated. For this purpose, initial powder mixtures with specific compositions were milled by means of planetary ball mill for different milling times. Microstructural properties and morphology of the obtained powders were analyzed by X-ray diffraction analysis (XRD) and scanning electron microscope (SEM). Also, magnetic properties of the samples were determined by means of vibration sample magnetometer (VSM). The results showed that the crystallite size was finer and more uniform and lattice strain was decreased slightly for longer milling times. Observations indicated that the addition of Si to the alloys leads to finer particles. The results also showed that increasing the Si content increases the reduction rate of lattice parameter and coercivity.
P. Razmjouee, S. M. Mirkazemi,
Volume 34, Issue 1 (5-2015)
Abstract
In this investigation, the effect of Polyvinylpyrrolidone (PVP) additive on microstructure, morphology and magnetic properties of cobalt ferrite nanoparticles prepared by hydrothermal method was studied. X-ray diffraction (XRD) studies in different synthesis conditions showed the formation of cobalt ferrite and cobalt oxide. Comparing IR spectrum of PVP additive, sol prepared before hydrothermal process and C-0.1PVP3, 190 obtained by FTIR spectroscopy indicated the formation of bond between PVP and surface of metallic hydroxide and cobalt ferrite particles, which prevented them from growing and coarsening. Scanning electron microscope (SEM) was used to study the morphology of samples. According to vibration sample magnetometer (VSM) results, as PVP amount increases from 0.1 to 0.3 volume percent, coercive field increases from 298 to 684 Oe and saturation magnetization decreases from 58 to 51 emu/g.
G. Gordani, A. Ghasemi, A. Saidi,
Volume 34, Issue 4 (3-2016)
Abstract
Nanoparticles of Mg–Co–Ti substituted strontium hexaferrite with nominal composition of SrFe12-2x(Mg,Co)0.5x TixO19 (x=0-2.5) were synthesized by a co-precipitation method. The structural, magnetic and electromagnetic properties of samples were studied as a function of x by thermal gravimetric (TG), X-ray diffraction (XRD), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM) and vector network analysis. It was found that the synthesis temperature increases with an increase in Mg–Co–Ti substitution and hence the particle size decreases. The XRD results showed that whole samples had good crystallinity and with an increase incations, the impurity phase of Fe2O3 appears. The results of hysteresis loops indicated that the saturation of magnetization of ferrite decreases from 40 emu/g to 19 emu/g with an increase in x. The Mössbauer spectroscopy showed that the cations are substituted in the 12k site of magnetoplumbite structure. Vector network measurements showed that the doped samples had much more effective reflection loss values than those of undoped ferrites. As a result, Mg–Co–Ti doped Sr-hexaferrites with x=2 can be proposed as suitable absorbers for applications in microwave technology with a good deal of consistency.
F. Nazari, M. Hakimi, H. Mokhtari, A.s. Esmaeily,
Volume 35, Issue 2 (9-2016)
Abstract
In this paper, milling was investigated as a method for production of Mn-Ga binary alloys and the effect of milling process on phase formation of Mn:Ga samples with 2:1 and 3:1 ratio within 1, 2 and 5 hour milling times was studied. For Mn:Ga samples, according to the results, Mn1.86Ga compound with tetragonal structure and I4/mmm space group was a stable phase. Also, some amounts of Mn3Ga compound with orthorhombic structure and Cmca space group was observed in the Mn:Ga solution. The effect of Ge addition, with the purpose of replacing Ge with Ga was also studied in Mn:Ga:Ge (3:0.5:0.5) sample. Although improved magnetic properties is expected with the addition of Ge, but increasing the coercivity was occurred, and saturation magnetization did not change significantly in the studied sample. Ge addition caused elimination of the possibility of formation of asymmetric orthorhombic Mn3Ga phase. In return, two new structures of Mn11Ge8 and MnGaGe were appeared. This phase change was confirmed by studying magnetic behaviour of samples. This behavior can be caused by unbalanced electrostatic forces resulting from Mn-Mn exchange interaction in Mn3Ga orthorhombic structure and substitution of some Ge atoms with Ga.
S. S. Seyyed Afghahi, M. Jafarian, M. Salehi,
Volume 35, Issue 3 (12-2016)
Abstract
In this research, investigation of the microstructure and magnetic properties of doped barium hexaferrite with cobalt, chromium and tin with BaCoxCrxSnxFe12-3xO19 (x=0.3,0.5) formula, was performed using solid state method. Phase and structural investigation by X-ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) Spectroscopy respectively, confirmed the formation of barium hexaferrites single phase without the presence of non-magnetic secondary phase after heat treatment for 5 h at temperature of 1000 °C. Also, according to scanning electron microscopy (SEM) images, morphology of particles was perfectly hexagonal with average particle size 200-250 nm. Based on magnetic parameters measured by Vibrating Sample Magnetometer (VSM), both samples were soft magnetic and the highest saturation magnetization was obtained for the sample with composition of BaCo0.3Cr0.3Sn0.3Fe11.1O19. The values of saturation magnetization (Ms) and the coercivity (Hc) were 42.21 emu/g and 656 Oe respectively for this compound.
S.t. Mohammadi Benehi, S. Manouchehri, M.h. Yousefi,
Volume 35, Issue 3 (12-2016)
Abstract
Magnesium-manganese ferrite nanopowders (MgxMn1-xFe2O4, x=0.0 up to 1 with step 0.2) were prepared by coprecipitation method. The as-prepared samples were pressed with hydrolic press to form a pellet and were sintered in 900, 1050 and 1250˚C. Scanning Tunneling Microscope (STM) images showed the particle size of powders about 17 nm. The X-ray patterns confirmed the formation of cubic single phase spinel structure in samples sintered at 1250˚C. Substituting Mg2+ with Mn2+ in these samples, the lattice parameter decreased from 8.49 to 8.35Å and magnetization saturation decreased from 74.7 to 21.2emu/g. Also, coercity (HC ) increased from 5 to 23Oe and Curie temperature (TC ) increased from 269 to 392˚C. Samples with x= 0.2, 0.4, 0.6 sintered at 1250 ˚C, because of their magnetic properties, can be recommended for hyperthermia applications and for phase shifters.
M. Hosseinzadeh, M. Bozorgmehr, M. Askari,
Volume 36, Issue 1 (6-2017)
Abstract
Cobalt-based amorphous alloys attracted the attention of many researchers to carry out fundamental research for their application in electronics, sensors and magnetic memory due to their special magnetic properties including close to zero Magnetostriction, magnetic permeability and high saturation magnetization. The purpose of this study is the formation and evaluation of microstructure and magnetic properties of cobalt-based amorphous alloy produced by melt spinning and mechanical alloying. The final compositions produced by both methods were studied by scanning electron microscopy, X-ray diffraction and vibrating magnetoresistance. The results showed that compound produced by chill block melt spinning has a better magnetic properties.
S. S. Seyyed Afghahi, M. Jafarian,
Volume 36, Issue 1 (6-2017)
Abstract
In this study, the effect of Fe/Ba molar ratio was investigated on the phase composition, synthesis temperature, microstructure and magnetic properties of barium hexaferrite prepared via mechanical activation. In order to synthesize this compound, Fe/Ba molar ratios of 12 and 6 were used. The effect of Fe/Ba molar ratio, milling time and heat treatment temperature for achieving the optimal conditions in producing this compound was studied. In order to study the phase, morphology and magnetic properties of the final product, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Vibrating Sample Magnetometer (VSM) were used respectively. According to the results, Fe/Ba molar ratio of 6, 10 h milling time and temperature of 800 °C were found to be the optimal conditions for producing this compound in a single phase. Scanning electron microscopy images show the hexagonal morphology and almost spherical particles respectively for samples prepared with Fe/Ba molar ratio equal to 12 and 6. Moreover, according to the magnetic studies, the maximum amount of saturation magnetization (56.48 emu/g) and the coercivity force (5247.2 Oe) were obtained for the sample synthesized with Fe/Ba molar ratio of 6.
S. Alamolhoda, S. M. Mirkazemi, T. Shahjooyi, N. Benvidi,
Volume 36, Issue 2 (9-2017)
Abstract
In this research, nickel ferrite nanoparticles were synthesized by sol-gel auto-combustion route, and the effect of calcination temperature on phase constituents, magnetic properties and microstructure of the synthesized nanoparticles was evaluated using X-ray Diffraction (XRD), Vibrating Sample Magnetometer (VSM) and Scanning Electron Microscopy (SEM). XRD results were submitted to quantitative analysis. Microstructural studies and crystallite size calculations showed formation of nanoparticles. XRD results showed that the combustion product consisted of NiFe2O4, α-Fe2O3, NiO, and FeNi3 phases. FeNi3 was eliminated by calcination, and the amounts of NiO and α-Fe2O3 were modvlated by changing in calcination temperature. Saturation magnetization changed from 37emu/g in combustion product to 30emu/g by calcination at 600°C, due to decomposition of FeNi3 magnetic phase and formation of higher amount of antiferromagnetic hematite phase. Also, the coercivity values increased, that could be due to increasing the amount of nickel ferrite phase and eliminating FeNi3 phase. Saturation magnetization reached to 43emu/g in calcinated sample at 1000°C due to the reaction between hematite and NiO phases that led to formation of higher amount of nickel ferrite to 43emu/g. Coercivity value dropped out to 127Oe by calcination at 1000°C, the reason of which could be incresing of particle size and formation of multi domain magnetic particles.
S. E. Mousavi Ghahfarokhi, F. Bazdar, I. Kazeminezhad,
Volume 36, Issue 2 (9-2017)
Abstract
In this paper, Ni-doped lead hexaferrites (PbFe12-xNixO19) nanoparticles with x = 0.2 were prepared by sol- gel method. Then, the effect of annealing temperature on its structural, magnetic and dielectric properties was studied. First, the dryed gel was evaluated by Thermogravimetry-Differential Thermal Analysis (TG/DTA) and then, the structural morphology, magnetic and dielectric properties of samples have been characterized by Fourier Transform Infrared (FT-IR) spectroscopy, X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Vibrating Sample Magnetometer (VSM) and LCR meter. The results of x-ray diffraction patterns show that by increasing annealing temperature up to 800 °C, PbFe11.8Ni0.2O19 phase percentage in the samples increases. Also, by increasing annealing temperature, the magnetization increases because the unwanted phases disappear and pure and single-phase lead hexaferrite are formed. By increasing frequency, first the AC electrical conductivity of the samples decreases and then increases. These variations have been explained by Maxwell- Wanger model. The result measurements show that the best sample is PbFe11.8Ni0.2O19 with annealing temperature of 800 °C for 3 h.
F. Ebrahimi, F. Ashrafizade, S. R. Bakhshi,
Volume 36, Issue 3 (11-2017)
Abstract
In this research, ordered porous anodic templates with 30 nm diameter and 15 µm thickness were prepared by using double anodization process. Dip coating method was employed to synthesize strontium ferrite in the form of nanowires in sol dilution. Ferrite nanopowders were also synthesized using sol gel method. The characterization of the nanostructures were examined by X-Ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM) and Energy Dispersive Spectroscopy (EDS). Hysteresis loops of nanopowders and nanowires, parallel and perpendicular to the wires axes, were measured by Superconducting Quantom Interference Device (SQUID). The results showed that double anodization in 0.3 M oxalic acid at 4 oC with a single anodization for 12 hours could produce ordered template. Dip coating in 80 oC for two hours could form fine and uniform strontium ferrite nanowires. The produced material showed parallel anisotropy.
M. H. Barounian, S. Hesaraki, A. Kazemzadeh,
Volume 37, Issue 1 (6-2018)
Abstract
In this study, a new bioactive and light-cure polymeric calcium phosphate nanocomposite containing a powder phase consisting of pure TetraCalciumPhosphate was synthesized by solid state sintering. By using indomethacin, a non-steroidal anti-inflammatory drug, and a liquid phase including polyhydroxy-based resin, Ethyl Methacrylate was prepared and evaluated after curing with the high-intensity blue light. Phase changes in the cement composition after soaking in phosphate buffered saline (PBS) were investigated using X-ray diffraction (XRD). Morever, changes in the chemical groups in the cement and the microstructure of the cement after soaking in the PBS were investigated by Fourier transform spectroscopy (FTIR) and electronscanning microscopic (SEM) images, respectively. XRD patterns and SEM images showed that after soaking the samples in. the PBS solution, a new calcium phosphate phase with a shape like needle and polka appeared on the surface, which was formed more in the drug-containing sample at a concentration of 5% wt. of these nanostructures. Other results also showed that with the passage of time, the structural degradation in the PBS was due to the conversion of the initial phases to the calcium phosphate phase (apatite). Also, the results of the mechanical strength test of polymeric cement samples containing the drugshowed that the mean compressive strength of the samples after the fixation was about 56 MPa, and it was decreased by 26 MPa with continuous immersion after 21 days.
M. Hosseinzadeh, M. Bozorgmehr, A. Ghasemi, M. Askari,
Volume 37, Issue 2 (9-2018)
Abstract
NdFeB magnetic alloy is one of the hard magnets having the highest maximum energy in the world. The most popular methods of manufacturing magnetic alloys Nd2Fe14B are powder metallurgy and rapid quenching techniques. In this research, the effect of the hot press temperature on the magnetic properties of the hard magnet Nd2Fe14B was studied. Structural studies were carried out using X-ray diffraction, X-ray fluorescence spectrometer and Scanning Electron Microscope; Spectroscopic energy distribution of Nd2Fe14B bulk magnet and the magnetic tests were done using a vibrating magnetometer to investigate the structures and the magnetic properties of the produced samples. The results showed that in addition to the Nd2Fe14B phase, the α-Fe and Nd-rich phase also existed in the structure of the provided magnet. These secondary phases had effectively created exchange couplings with the main phase, improving the magnetic properties. The magnetic properties of the sintered magnets were improved by increasing the press temperature; finally, Nd2Fe14B magnet was made with the maximum energy, which was d higher than 290 kj/m3 .
M. Eshraghi, Z. Mosleh, M. Rahimi,
Volume 38, Issue 1 (6-2019)
Abstract
In this investigation, the structural and magnetic properties of Cr and Zn substituted Co ferrite with the general formula Co1-xZnxFe2-xCrxO4 (x= 0.1, 0.3, 0.5, 0.7) as prepared by sol- gel method were studied. The structural, morphological and magnetic properties of the samples were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Scanning electron microscopy (SEM) and Vibrating sample magnetometer (VSM). XRD measurements along with the Rietveld refinement indicated that the prepared samples were single phase with the space group of Fd-3m. Results of SEM images also showed that the particles were in the nanosize range. Also, the magnetic properties of the samples indicated that the magnetization was first decreased, reaching the minimum value for x=0.1 sample; then it was increased. This behavior was related to the cation distribution at the tetrahedral and octahedral sites. Moreover, coercivity was significantly decreased with increasing the doping level due the decrease of magnetocrystalline anisotropy because of the nonmagnetic Zn ion substitution.
N. Alirezaei Varnosfaderani, S. E. Mousavi Ghahfarokhi, M. Zargar Shoushtari,
Volume 38, Issue 3 (12-2019)
Abstract
In this paper, W-type SrCo2Fe16O27 hexaferrite nanostructures were synthesized by sol-gel auto-combustion method. Effect of annealing temperature on the structural, magnetic and optical properties of these SrCo2Fe16O27 nanostructures was investigated. In order to determine the annealing temperature of samples, the prepared gel was examined by thermo-gravimetric and differential-thermal analyses. Morphology and crystal structure of the prepared samples were characterized by field emission scanning electron microscopy and X-ray diffraction pattern. Based on X-ray diffraction results, at annealing temperature of 1000 °C, the maximum amount of main phase formed. A planar morphology was spectroscopy for the synthesized samples through scanning electron microscope images. Fourier transform infrared analysis was used to confirm the synthesis of the main properties obtained of samples were measured by the vibrating sample magnetometer and the results showed that by increasing temperature, magnetic saturation increases. Moreover, optical properties of samples were investigated by ultraviolet–visible absorption and photoluminescence spectroscopies. The result of measurements of the energy gap approximately is same in the ultraviolet- visible and photoluminescence spectroscopes and also the energy gap is constant with increasing temperature.
M. Shayestefar, A. R. Mashreghi, S. Hasani ,
Volume 40, Issue 1 (5-2021)
Abstract
Mn0.8Zn0.2Fe2-xDyxO4 (where x= 0, 0.025, 0.05, 0.075, 0.1) ferrite nanoparticles were synthesized by auto- combustion sol-gel method for the first time in this study. The effect of Dy-doping on the structural and magnetic properties of the produced specimens was examined using the X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), vibrating sample magnetometery (VSM), and field emission scanning electron microscope (FE-SEM). The results showed that a cubic spinel structure was formed in all of the synthesized specimens. It was also found that the addition of Dy increased the lattice parameter while decreased the average of crystallites size. Furthermore, the FE-SEM micrographs showed that Dy not only plays an effective role in reducing the agglomeration of nanoparticles and their distribution, but also reduces the average of particle size. It was also observed that the addition of Dy had no effect on the morphology of the synthesized nanoparticles. Investigation of the magnetic properties revealed a clear decrease in the saturation magnetization and coercivity by the Dy addition. So that the saturation magnetization of the samples decreased from 66.3 to 58.4 emu/g and the coercivity decreased from 78.5 to 71.9 Oe.
M. Ghorbani, H. Khorsand,
Volume 40, Issue 2 (9-2021)
Abstract
Strontium hexaferrite M-type nanoparticles doped with La and Cu (SrFe12-xCuxO19-Sr1-xLaxFe12-xCuxO19) with different mole fractions (x=0.1-0.2-0.3-0.4-0.5) synthesized by self-combustion sol-gel technique. Firstly, a gel of metal nitrates with the above-mentioned mole fractions were fabricated and the obtained powder was cured at 950°C. Microstructural properties and the morphology of the compounds were investigated by employing X-ray diffraction (XRD) and scanning electron microscopy (SEM). Also, in order to investigate the magnetic properties, Vibrating Sample Magnetometer (VSM) was used. SEM images revealed that the particles had an average size of about 100 nm. Cu2+ ions were substituted with Fe3+ ions within the crystalline sites of SrFe12O19 structure. It was shown that the lattice parameter (a) remained approximately unchanged with an increase in Cu-dopped while the lattice parameter (c) decreased with increasing the mole fraction (x). By using VSM hysteresis diagrams, it was observed that the saturated magnetization and coercive force increased with the addition of La; this was attributed to the variation in the distribution of ions and the shape anisotropy of the nanoparticles. These significant changes in the magnetic properties were for the sample with the composition of Sr1-xLaxFe12-xCuxO19 and SrFe12-xCuxO19, for the x=0.1 and x=0.5, respectively.
