Volume 22, Issue 2 (Summer 2018)
jwss 2018, 22(2): 189-198 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Hasheminejad H, Taebi Harandi A, Paydary P. Evaluation of Tannic Acid as Coagulant for Water Turbidity Reduction in Preliminary Water Treatment. jwss 2018; 22 (2) :189-198
URL: http://jstnar.iut.ac.ir/article-1-2799-en.html
URL: http://jstnar.iut.ac.ir/article-1-2799-en.html
1. Department of Water and Environment, College of Civil Engineering, Isfahan University of Technology, Isfahan, Iran. , hhasheminejad@cc.iut.ac.ir
Abstract: (6242 Views)
The goal of this study was to evaluate tannic acid as a coagulant in turbidity removal. Tests were designed using Taguchi method and carried out on the synthetic and natural turbid samples. In order to optimize turbidity removal by tannic acid, seven factors including pH, coagulant dosage, rapid mixing rate, slow mixing rate, slow mixing time, sedimentation time and initial turbidity were investigated. The results revealed that in optimum conditions, tannic acid could n remove up to 71 percent of synthetic turbidity and 66 percent of natural turbidity; also, tannic acid showed more coagulation activity in the lower initial turbidities. ANOVA analysis showed that initial turbidity and slow mixing time were the most important parameters in the turbidity removal by tannic acid. In general, this study showed that tannic acid was capable of removing turbidity and could be used instead of common coagulants in the preliminary treatment.
Type of Study: Research |
Subject:
Ggeneral
Received: 2014/09/30 | Accepted: 2017/12/10 | Published: 2018/09/15
Received: 2014/09/30 | Accepted: 2017/12/10 | Published: 2018/09/15
| Rights and permissions | |
 | This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
