Showing 8 results for Askari
E. Askari Asli Ardeh, S. Sabori, M. R. Alizadeh,
Volume 12, Issue 44 (summer 2008)
Abstract
A considerable portion of threshing losses and waste of rice takes place in threshing stage. One of the effective factors in threshing losses and waste of threshing units, threshers and harvesting machines, is the drum speed. In this research, effects of three factors including drum speed (five levels), crop moisture content (two levels) and rice common varieties (four varieties) on threshing losses and waste were studied. The thresher T25 was used for the investigation. It has wire loop type tooth. Dependent factors included unthreshed grains percentage (threshing losses) and damaged grains percentage. The obtained data was analyzed by split–split plot test based on Complete Randomized Blocks Design. The mean values were compared using Duncan’s Multiple Range Test. The tests results revealed that significant effect of variety type and drum linear speed on threshing losses (P<0.01). Furthermore, the effects of variety type, moisture content and drum speed on damaged grains were also significant. The optimum drum speed was 14 m/s. The most and the least of threshing losses belong to Hashemy and Binam varieties, respectively. Among the tested varieties, Binam variety showed the highest percentage of the damaged grains. In general, decreasing the crop moisture resulted in increasing the mean damaged grain.
A. R. Askarianzadeh, S. Moharramipour, Y. Fathipour, A. Narrei,
Volume 12, Issue 45 (fall 2008)
Abstract
Cultivars or species of different plants through physical and biochemical characteristics or indirectly through food diet of host plant can influence behavioral characteristics and efficiency of a natural enemy. This investigation was conducted to determine percentage of parasitism and functional response of parasitoid wasp, Platytelenomus hylas (Hym., Scelionidae) to different egg densities of stem borer, Sesamia nonagrioides (Lef.) and effect of different cultivars on it. At the first stage, eggs of pest were separately collected from fields in three cultivars of CP48-103, CP69-1062 and CP57-614 and then percentage of parasitism in each cultivar was calculated. For determining functional response of the wasp, collected eggs from fields were reared to adult stage at 29±1 ºC, 60% of RH,. Then functional response of wasp was investigated at densities of 2, 4, 6, 8, 14, 20, 30, 40, 50, 60, 70, 80, and 90 of the host eggs for 24h. Analysis of data was done using SAS software. Results showed that egg parasitism by P. hylas in cultivars were significantly different (p<0.05). Type of cultivars influences rate of egg parasitism. Comparison of means by Duncan’s test showed that CP48-103 cultivar significantly differed from two other cultivars: CP69-1062 and CP57-614. Functional response in three cultivars was found to be a type III. Comparison of estimated parameters by Holling model in three cultivars showed that searching efficiency on CP48-103 cultivar was significantly higher than two other cultivars but CP57-614 and CP69-1062 were close to each other. Also, handling time (Th) and the maximum rate of estimated parasitism (T/ Th) on the three cultivars were different and on CP69-1062 they were significantly less than the two other cultivars.
B Salari, M Shamsedin Said, A Askarian Sardari,
Volume 12, Issue 46 (fall 2009)
Abstract
In order to study the effect of NaCl priming on some agronomical and physiological traits of corn (single cross 704), an experiment was conducted at Agricultural Research Station of Bahonar University of Kerman in 2005. The experimental design was completely randomized designs with 3 replications. Treatments were a combination of all different levels of two factors including salinity levels (1, 4, 8, 12, 16 dS/m) and salinity solution for NaCl priming (1, 4, 8, 12, 16 dS/m). Results showed that salinity and NaCl priming had significant effects on total emergence, mean time to emergence, root and stem length, number of leaf, relative water content, ion leakage and K+/Na+. Mean comparison showed that increasing salinity decreased all plant characteristics (with the exception of mean time to emergence and ion leakage) by %49.5, %33.49, %23.97, %18.64, %14.05 and %40.20, respectively. However, increasing salinity led to 1.2 and 1.3 increase in mean time to emergence and ion leakage of leaves, respectively. Mean comparison also showed that NaCl priming decreased negative effects of salt stress, and all mentioned traits under NaCl priming increased as compared with control. The results showed that NaCl priming is a useful method for increasing salt tolerance in corn plant.
A Farahanaki, Gh Mesbahi, H Askari,
Volume 12, Issue 46 (fall 2009)
Abstract
Date fruit as a high calorie and valuable food source can be one of the main Iranian agricultural commodities for export, if properly processed and packed. The aim of this study was to process Kabkaab date variety from Routab (high moisture dates) to Tamar (known as dates or dry dates) using an industrial cabinet dryer. The Routab samples were dried using hot air at 56, 66, 76, 86 and 96 ˚C and changes in weight, moisture, pH, colour, texture and density of the dried samples were monitored. The results indicated that at 56 and 66 ˚C, drying rate was too low to be economic for an industrial process. At 86 and 96 ˚C the drying rate was high, although quality factors like colour was not acceptable. Therefore 76 ˚C is recommended as the best temperature for drying dates fruit. Moisture range of 24-27% (db) was the critical moisture level where a sharp decrease was observed in drying rate. Textural experiments of dates fruits with a wide range of moisture contents showed that above 30% moisture the hardness does not change with moisture level however, below 30% a small change in moisture can have a considerable impact on texture.
H Ghobari, H Goldansaz, H Askari,
Volume 13, Issue 47 (4-2009)
Abstract
One of the most important pest in the Oak forest of Kurdistan province is Oak leaf roller moth, Tortrix viridana L. (Lep.: Tortricidae). Use of pheromone trap is one of the suitable methods for monitoring and controlling of the pest. In this work, three main factors which affect the efficiency of traps including trap type, pheromone dose and installation height trap were studied. Four types of trap including cylindrical, rectangular, delta and wing trap were tested. Capture efficiency of the traps, were installed in the middle, and top heights of the trees were compared. Three doses of pheromone 0.5, 1, and 1.5 mgr per trap were also compared. Results showed that there were significant differences among four types of traps. Cylindrical, rectangular and delta traps caught more number of moths than wing trap (P<0.05). There were no significant differences between two installation heights (P>0.05). However, a significant differences was observed among three doses (P<0.05), and the dose of 0.5 mg caught more moths than the other three doses. Therefore cylindrical traps containing 0.5mg of synthetic sex pheromone installed in the middle of the trees canopy may be recommended in the management program of the pest.
H Askarian, B Sharifnabi, M Olia, E Mahdikhani, A Akhavan,
Volume 13, Issue 47 (4-2009)
Abstract
Root knot nematodes (Meloidogyne spp.) cause yield loss in all countries, of which, M. javanica, is the most widespread species in Iran. In order to identify M. javanica, 100 infected root and soil samples of root knot nematode were collected from different regions of Kerman province. After purification of populations and identification of M. javanica based on morphological and morphometerical characters of females and second stage juveniles (J2), total DNA was extracted from eggs, J2 and female adults. Specific 670 and 1600 bp bands were amplified in all M. javanica populations using species-specific primer pairs including OPARjav / OPAFjav and Mjavf / Mjavr These specific bands could not be amplified in other species such as M. incognita and M. arenaria. It seems that, application of these species specific primers in comparison with morphological characters would be more applicable, leading to easier identification of M. javanica.
M. Najafi-Ghiri, A. R. Mahmoodi, S. Askari,
Volume 19, Issue 72 (summer 2015)
Abstract
Potassium (K) is an important cation in saline soils of arid lands, and its content, distribution and availability may be affected by native plants. To study the effect of halophyte species on different K forms in Korsia region located in western Darab (Fars province), three dominant halophyte species including Juncus gerardi, Halocnemum strobilaceum, and Salsola rigida were selected. Sampling was done from soils in canopy and between plants at the depth of 0-15 (surface) and 15-30 cm (subsurface) in triplicate. Soil physical and chemical properties including soil texture, organic matter, calcium carbonate, pH, cation exchange capacity, saturation percentage and electrical conductivity and different K forms including soluble, exchangeable and non-exchangeable were determined. Results indicated that organic matter, CEC, pH, and EC were affected by plant species. Juncus gerardi increased exchangeable K and decreased soluble K, but it had no effect on non-exchangeable and HNO3-extractable K. Halocnemum strobilaceum significantly increased soluble, exchangeable and HNO3-extractable K in surface and subsurface soils rather than soils between plants. This finding may be due to K uptake by plants from subsoils and also transfer of soluble K from soils between plants to roots. Salsola rigida had no effect on K status. Generally, soils between plants had more soluble and exchangeable K in surface than subsurface horizon. The studied halophyte species showed differences in growth and development pattern, soluble salts and K absorption and secretion, grazing by livestock, returned organic matter to soil, soluble salts and K reserves in their organs, and water uptake and thereby water and K diffusion from soil far from rhizosphere to roots, which may have different effects on K distribution in soils. Juncus gerardi, as regards effects on decreasing salinity and soluble K and increasing exchangeable K, may be recommended as a suitable species for remediation of the studied soils.
M. Askari, A. A. Kamgar-Haghighi, A. R. Sepaskhah, F. Razzaghi, M. Rakhshandehroo,
Volume 24, Issue 3 (Fall 2020)
Abstract
In the present study, the effects of different levels of irrigation, organic mulch and planting method on the mungbean yield in Badjgah were investigated. The experimental plan in the first year was full randomized block, while in the second year, it was full randomized split-split plot block design, in three repetitions. The results showed that in the FI treatments, the yield was increased up to 2% for the first year and 5% for the second year by changing the planting method from on over-ridge planting method to the in-furrow planting one. Also, the results of the first year showed that there was no significant difference between the yield in the fully-irrigated treatments without mulch and the treatment with mulch and 0.75 FI. The amount of the irrigation water could be decreased up to 25% by adding organic mulch in both planting methods, as compared to the fully-irrigated treatments without mulch. The maximum water productivity equal to 0.4 kg/m3 was observed in 0.5 FI, in-furrow planting method with mulch treatment. It can be, therefore, concluded that the water productivity may be maximized with the application of both deficit irrigation and mulching strategies.
