Showing 5 results for Bassiri
Mohammad Reza Vahhabi, Mehdi Bassiri, Jamaleddin Khajeddin,
Volume 1, Issue 1 (summer 1997)
Abstract
Short-term changes (5 years) in canopy cover, species composition and forage production were studied under protection from grazing and grazed condition in 19 range sites in Fereydan region, Isfahan province. In this study, density, canopy cover and forage production data were obtained from quadrates inside and outside exclosures in the spring of 1983. These parameters were studied again in 1988 and compared with the previous data. Results indicated that species diversity in these range sites was relatively high up to 212 plant species were identified. Sixteen, 8.5 and 75.5 percent of these species were classified into I, II and III palatability classes respectively. After five years, comparison of inside and outside exclosures indicated an increase in the density of species of I, II and III palatability classes by 138.8, 120.8 and 51.5 percent inside exclosures, respectively. Density of all species had increased by 62 percent as a result of 5-year protection from grazing. Species composition data as canopy cover were used to construct 3 dendrograms to investigate the similarity among range Sites. Assuming 32% similarity as the threshold level, 19 range sites were classified into 10 vegetation types in 1983. After 5 years, these vegetation types decreased to 8 and increased to 11 under protection from grazing and grazed conditions, respectively. The average forage production inside exclosures was almost twice as much as in grazed sites (600 Vs. 315 kg/h). Three groups of range sites were recognized according to the time requirement for rehabilitation by grazing protection. The first group was improved considerably by the end of the 5-year protection Period. The second group improved relatively within five years of grazing exclusion. The third group did not improve by 5-year grazing protection and needed much longer protection period or some other range rehabilitation practices.
A. Mirlohi, N. Bozorgvar, M. Bassiri,
Volume 4, Issue 2 (summer 2000)
Abstract
In order to determine the most suitable cultivar and N level based on yield and silage value of forage sorghum, an experiment was conducted in summer 1995. The experiment was arranged in a split-plot design with four replications. Two levels of N (300, 500 Kg/ha urea) were the main plots and the subplots were three sorghum hybrids (Sugar graze, Super dan and Speed feed). Seeds were hand sown on June 29 with an inter row space of 50 cm and a final density of 20 plant/m2.
The results showed that when the N rate increased, forage yields and percent of protein in forage and silage increased. Also panicle dry weight increased at anthesis. The N rate had no significant effect on other traits. A significant difference was observed among hybrids for all characteristics measured. Sugar graze with a bigger stem diameter was taller and produced higher number of leaves. At anthesis, plant leaf and stem dry weight was also highest for Sugar graze however, the highest panicle dry weight belonged to Speed feed. There was a significant interaction between hybrids and N levels for dry matter production. The percent of leaf, stem and panicle dry matter was highest in sugar graze, Super dan and Speed feed, respectively. The Sugar graze produced the highest forage and dry matter yield. This hybrid produced 30 ton/ha of dry matter and 97 ton/ha of forage, respectively.
Furthermore, this cultivar had the highest percent of forage crude protein (7.45%) and the least percent of forage crude fiber (25.12%). Ensiling caused a decrease in percentage of crude protein and an increase in crude fiber. The Sugar graze and Speed feed had the highest and lowest dry matter digestibility, respectively. Based on the results obtained from this study, Sugar graze was found to be the most suitable hybrid due to its highest forage and dry matter yield and better silage quality. Higher N rate (500 kg/ha) is also recommended for higher forage yield and higher percentage of protein.
A.a. Vali, M. Bassiri,
Volume 4, Issue 3 (fall 2000)
Abstract
Artemisia is the major component of the vegetation of a large portion of arid lands in Iran. Determining the utilization rate is an essential element in the management of these rangelands. Methods of determining the utilization regime for woody plants and shrubs include clipping and weighing, reference unit, ocular estimate, twig length, branch diameter and production index. These methods were used in Chahlor winter range in Jarghoyeh, 250 Km southeast of Isfahan. Clipping and weighing is the most accurate although the most time-consuming method. In this research, means of utilization percentages obtained from the above methods were compared with the mean obtained from the clipping and weighing method using T-test.
Data obtained from reference unit, twig length, and branch diameter methods were not significantly different from those of clipping and weighing method (P>0.0l). Since reference unit was the least time-consuming among these methods, it was selected as a proper method of utilization measurement of Artemisia stands.
F. Amiri, M. Bassiri, M. Iravani,
Volume 9, Issue 2 (summer 2005)
Abstract
The vast and diverse rangelands of Iran require the selection of appropriate methods for grazing intensity measurement in the different vegetation types. Methods can be compared on the bases of time and budget as well as their accuracy. In this study nine methods of the utilization measurement were conducted on the E. ceratoides stands of Hanna exclosure Semirom, Isfahan province. The duncan multiple range test was used to compare mean utilization percentages obtained from the different methods, with paired cage method data was used as control group. Analytical Hierarchy Process (AHP) was also used to compare methods for accuracy, time and budget. The means from reference unite, twig length, production index, plant count and stem count methods had significant (p<0.05) differences compared with control group but were comparatively time consuming and more expensive than other methods. The height-weight method resulted in an estimate with no significant difference with the control group. This method was also fastest and least expensive among methods with the accurate results (p<0.05).
M. Mousaei Sanjerehei, M. Bassiri,
Volume 11, Issue 40 (summer 2007)
Abstract
Selection of efficient indices is very important for detecting and measuring random, uniform and clumped distribution patterns of plants in different plant communities. To compare and evaluate indices of dispersion patterns of plants, three stands were selected in Nodushan, Yazd. A (50m*100m) area was selected within each stand for sampling. Sampling was randomly systematicly conducted. Measurements and counts were made at 50 points and (1 and 2m2) quadrats which were randomly selected along four 100m transects within each sampling area. Indices of dispersion using quadrate studied in this survey include: Standardized index of Morisita, Morisita's index, Green's index, Dispersion (variance/mean ratio) index , Lloyd's index of patchiness and distance indices of dispersion including Pielou, Hopkines, T square, Eberhardt , Hines, Johnson and Zimer and Holgate indices. Results showed that T square and Holgate indices were more powerful than the other indices for detecting intensity of small-scale and tightly clumped pattern of shrubs because the two indices could distinguish between single individuals and the individuals on the edges of dense and small clumps. Johnson and Zimer index and Standardized index of Morisita (in shrublands with plant cover greater than 5%) were more efficient than the other indices for determining spatial pattern of these small clumps and single individuals. Among studied indices of dispersion, Green's index had the highest precision and with the exception of this index, distance indices were more precise than the quadrate indices.
