Showing 5 results for Jalilvand
H. Latifi, J. Oladi, S. Saroei, H. Jalilvand,
Volume 11, Issue 40 (summer 2007)
Abstract
In order to evaluate the capability of ETM+ remotely- sensed data to provide "Forest- shrub land- Rangeland" cover type map in areas near the timberline of northern forests of Iran, the data was analyzed in a portion of nearly 790 ha located in Neka- Zalemroud region. First, ortho-rectification process was implemented to correct the geometric errors of the image, which yielded 0/68 and 0/69 pixels of RMS error toward X and Y axis, respectively. The original
multi-spectral bands were fused to the panchromatic band using PANSHARP Statistical module. The ground truth map was prepared using 1 ha field plots in a systematic- random sampling grid. Vegetative form of trees, shrubs and rangelands was recorded as a criterion to allocate the plots. A set of channels including original bands, NDVI and IR/R indices, and first components of PCA was used for classification procedure. Automatic band selection command was used to select the appropriate channel set.. Classification was carried out using ML classifier on both original and fused data sets. It showed 67% of overall accuracy and 0/43 of Kappa coefficient in original data set. Due to the results present presented above, it's concluded that ETM+ data has an intermediate capability to fulfill the spectral variations of 3 form- based classes, in the studied area. Furthermore, applying complementary methods to minimize the background spectral effect is proposed for future studies.
S. E. Sadati, S. F. Emadian, H. Jalilvand, J. Mokhtari, M. Tabari,
Volume 11, Issue 41 (fall 2007)
Abstract
The present research was conducted to find the influence of some topographic factors on distribution of large-leaved lime (Tilia platyphyllos Scop.) and its natural regeneration characteristics in "Vaz" forest (northern Iran). After identification of site and preparation of topography map, selective sampling method was carried out for tree inventory in plots. The sample plots were circular in 1000-m2 areas with at least 2-3 dominant lime trees in each. In the plots, altitude, slope gradient, direction, forest storey, tree type and natural regeneration were investigated. Results indicate that in this habitat the average diameter at breast height and height of Tilia platyphyllos is 36.9 cm and 23 m, respectively. Tilia platyphyllos prefers 1200-1400 m altitude, 75-100% slope gradient and northeastern to eastern directions and benefits from denser trees in these environments. It consists of some tree types together with Fagus orientalis, Carpinus betulus and Parrotia persica, whereas the dominant type is Tilia platyphyllos-Fagus orientalis. In most of tree types, lime occurs in the upperstorey. Natural regeneration of lime is often observed as sprout (coppice shoot).
A. Goleij, H. Jalilvand, M. R. Pormajidian, M. Tabari, K. Mohammadi Samani,
Volume 11, Issue 41 (fall 2007)
Abstract
In order to investigate the success of natural regeneration and to determine the best area for regeneration settlement, 12 gaps with the areas ranging from 50-100, 150-300, and 400-600 m2 and 4 replicates equal elevation level were selected. For measuring frequency, height, and collar diameter of regenerated seedlings, a certain number of 2 m2 subplots were carried out inside the gaps, along the bigger diameter, and related to each gap’s area. Results showed that the number of seedling varies from 5 (in big gaps) up to 28 (in small and moderate gaps) per square meter. Furthermore, there was not a significant difference between the number of seedlings in small and moderate gaps. In contrast, the number of seedlings in small and moderate gaps was significantly different from those in large gaps (at 1% Probability). This finding demonstrates that natural regeneration would be limited in large gaps (400-600 m2) but it shows a better result in smaller gaps, associated with single- tree harvests. The final result of this study shows that the most appropriate area for selective cuting in such an area is up to at most 300 m2.
H. Jalilvand,
Volume 11, Issue 42 (winter 2008)
Abstract
This study was down in Forest Park of Noor. In order to determination of tree ring response to climatic variations, 35 cores were taken from dominant natural stand of common ash (Fraxinus excelsior L.). The guide of this study was finding which climatic variables are effective in the ring width growth of ash in current growing year and previous years (one, two and three years before current growing year) by multiple regression models at the North of IR-Iran. Totally, 85 annually, monthly seasons and seasonal growth climatic variations of precipitation, temperature, heat index, evapotranspiration and water balance were analyzed. The best multiple regression models were explained 83 percent of total variance of the growth of common ash. The results show that the growth of common ash was related to the previous year's climatic variations than that of the current year. The most effective role of climatic variations was due to the first and second preceding years (55%). Evapotranspiration of July and September, and precipitation of May in the second and precipitation of March in the third previous years, all were positively affected the growth of this species. This study revealed that ash is interested in warmer condition on early and middle of seasonal growth in present of available humid, and precipitation in the months of early growing season (Ordibehesht-Khordad of two previous years).
A Parsakho, S.a Hosseini, M Lotfalian, H Jalilvand,
Volume 13, Issue 47 (4-2009)
Abstract
Forest roads must be constructed according to technical standards and guidelines which have been published by the scientific and operational organizations. Recently, hydraulic excavators have been used beside the bulldozer for excavating the forest roads. Thus, it is necessary that their ability in construct of standard cross sections be compared. This study was conducted in Lattalar forest which is located south of Sari city (Mazandaran Province). 60 cross section samples were randomly selected for each machine in slope classes of 30-40, 40-50, 50-60 and 60-70%. Then, cross sections were taken by niveau and clinometer. The results in different slope classes showed that the hydraulic excavator and bulldozer had no significant effect on cut and fill slopes length and gradient. Roadbed width in bulldozer construction area was more than the hydraulic excavator at probability level of 1%. Also, there was a significant difference between the hydraulic excavator and bulldozer earthworking width in slope classes of 30-40 and 40-50% at probability level of 5 and 1%, respectively, whereas this difference was not significant in other slope classes. Finally, the average standard cross sections for hydraulic excavator and bulldozer were 89.96 and 84.81%, respectively.
