Showing 14 results for Kiani
H. Salami, A. Kiani Rad,
Volume 5, Issue 4 (winter 2002)
Abstract
This study uses the Generalized Composite Commodity Theorem (GCCT) to investigate the consistency of aggregating major crop products in studying producer’s behaviour in Iran. The results show that all crop products, except corn, soybean, and melon can consistently be grouped into cereals, oil seeds, pulses, and vegetable composite commodities. In addition, the results testing the hypothesis of the possibility of aggregating all crop products in a single group was positive when we excluded sesame, cotton, and water melon from the list. Accordingly, modeling and estimating an aggregate production or cost function for Iranian crop sector will not cause consistent biases. Additionally, one can estimate a separate or cost function for each of the above sub-sectors without causing aggregation biases in grouping the commodities.
F. Kiani, A. Jalalian, A. Pashaee, H. Khademi,
Volume 11, Issue 41 (fall 2007)
Abstract
To investigate the degree of forest degradation and the effect of land use change on selected soil quality attributes in loess-derived landforms, samples were taken from different land uses including forest, rangeland, degradated rangeland and farmland in Pasang watershed located in the Galikesh area of Golestan province (37°16'N, 55°30'E). The annual average temperature and mean precipitation of study area were 15°C and 730 mm respectively. Organic matter, pH, EC, CaCO3 and nutrients (N, P, K) as chemical indicators, hydraulic conductivity, bulk density and porosity as physical indicators and soil respiration as biological indicator were measured. The results showed that the amount of organic matter decreased three percent when it was turned from forest to farmland, and increased two percent from farmland to rangeland. The amount of CaCO3 in surface layer of deforested area was more than in the forest soils. The amount of soil N in forest and soil P and K in rangeland were higher than in other land uses. Bulk density and porosity in forest and MWD in rangeland were higher than in other land uses because of the decrease in organic matter due to farming activities. Soil respiration in forest was highest as compared to in other land uses. Difference of enzymes activities (L-asparaginase and Dehydrogenase) compared to microbial respiration indicates that enzymes activity is related to specific biological processes while soil microbial respiration basically depends on the general activity of soil microbial population. It could be concluded that amount of organic matter, soil N, bulk density, porosity, MWD, soil respiration and enzymes activities are suitable indicators for soil quality evaluation in this area.
Sh Kiani, N Babaeeian Jelodar, Gh Ranjbar, S.k Kazemi Tabar, M Norouzi,
Volume 13, Issue 47 (4-2009)
Abstract
In order to study gene action in rice for traits related to quality (gelatinization temperature, gel consistency and amylose content), four varieties of rice (Sang-e-Tarrom, Gerdeh, IRRI2 and IR229) were investigated. Ten different generations including P1, P2, F1, RF1, BC1, RBC1, BC2, RBC2, F2 and RF2 were evaluated using generation mean analysis. In generation mean analysis, one of non-allelic interaction components, [i], [j]1, [j]2, [l]1, [l]2, [l] was significant indicating the genetic model of these characters were described by additive-dominance model with non-allelic gene interaction (except for gelatinization temperature trait in Sang-Tarrom × Gerdeh cross). The cross IRRI2×IR229 showed duplicate epistasis for gel consistency trait. Cytoplasmic effects and interactions between cytoplasmic and nuclear effects in two crosses were significant for amylose content and gel consistency traits. The estimation of narrow and broad-sense heritability for two crosses were 0.77 to 0.99 and 0.05 to 0.93, respectively. The predominantly additive nature of the genetic variability was further revealed by the variance components. Component D was detected significant in all the crosses. The covariance component and , however, showed indirectly that dominance contributed significantly to variability at the variance level. Therefore, according to the obtained results, selection can be effectively done in later segregation generations for gel consistency and amylose content and in early generation for traits.
Sh. Kiani, Gh. Zadeh Dabagh, M.j Malakouti, A. Alizadeh ,
Volume 14, Issue 51 (spring 2010)
Abstract
Gray mold, caused by Botrytis cinerea, is a serious disease of cut rose flowers (Rosa hybrida L.) in Iran. In order to elucidate the effects of different potassium and calcium levels in nutrient solution on susceptibility of cut rose flowers to gray mold, this experiment was carried out as factorial design in a randomized complete block with four replications at Safi Abad Agricultural Research center in 2008 for one year. In this experiment, rose plants were grown and subjected to three levels of potassium (1.0, 5.0 and 10.0 mM) in combination with two levels of calcium (1.6 and 4.8 mM) under hydroponic condition. Rose flowers from two consecutive harvesting periods were sprayed with the conidial suspension (104 spore/ml) of B. cinerea isolate. At the end of experiment the disease severity was recorded and analyzed. The results indicated that application of 10.0 mM K in the nutrient solution led to increasing rose disease severity to gray mold (30.4 % day-1) compared to 1.0 mM (24.8 % day-1) and 5.0 mM (26.2 % day-1) of K levels (P< 0.01). The increased susceptibility was associated with a decreased concentration of Ca in the rose petals. Correlation analysis revealed that susceptibility of rose flowers to gray mold significantly increased with K to sum cations ratio in the nutrient solution (r = 0.94*). The increase of Ca supply from 1.6 to 4.8 mM resulted in decline of disease severity from 29.6 to 24.6 % day-1 (P< 0.01). Therefore, balanced application of potassium and calcium (5.0 and 4.8 mM, respectively) is recommendable for preventing antagonistic effects between them and reducing of rose gray mold intensity under hydroponic conditions.
N. Ghorbani Ghahfarokhi, Z. Kiani Salmi, F. Raiesi, Sh. Ghorbani Dashtaki,
Volume 17, Issue 63 (Spring 2013)
Abstract
Free and uncontrolled pasture grazing by animals may decrease soil aggregate stability through reductions in plant cover and subsequent soil organic C, and trampling. This could expose the soil surface layer to degradation and erosion. The objective of this study was to determine the influence of pasture management (free grazing, controlled grazing and long-term non-grazing regimes) on aggregate-size distribution and aggregation parameters by wet and dry sieving methods in two native pastures, protected areas in Chaharmahal va Bakhtiari province. The studied pastures were 1) SabzKouh pastures protected from grazing for 20 years, and 2) Boroujen pastures protected from grazing for 25 years. Soil samples were collected from 0-15 cm depth during the grazing season in summer 2008. Samples (finer than 2 mm) were analyzed for aggregate-size distribution and aggregation parameters by wet and dry sieving methods. Results showed that pasture management had a significant influence on aggregate-size distribution and aggregation parameters in the two areas. The two methods indicated that macro-aggregates in non-grazing and controlled grazing regimes were higher than those in free grazing regime, whereas in free grazing management micro-aggregates showed an opposite trend, and were greater compared with the other grazing regimes. Similarly, soil aggregate stability indices (i.e. mean weight diameter, aggregate geometric and ratio mean diameter) were all improved by non-grazing regimes, suggesting that animal grazing and trampling break down large soil aggregates due largely to compaction and reduced plant coverage. However, the extent to which grazing affects soil aggregation depends in large part on grazing intensity and duration, and the area involved.
M. Kiani, M. Gheysari, B. Mostafazadeh-Fard, M. M. Majidi and E. Landi, , , , ,
Volume 18, Issue 67 (Spring 2014)
Abstract
The purpose of this study was to measure daily and seasonal evapotranspiration and daily crop coefficient of two common varieties of sunflower (Sirna and Euroflor) via drip-tape irrigation system. For this purpose, the sunflower water use was determined by daily monitoring of soil moisture at the depths of 10, 20, 30, 40 and 60 cm, and the crop evapotranspiration (ETC) was measured using volume balance method. According to the equation recommended by FAO, the obtained value of KC for Euroflor and Sirna varieties at the initial stage was 0.32. According to volume balance method, the Euroflor KC value for development, middle, and late stages were found to be 0.75, 1.18 and 0.9 and for Sirna were found to be 0.72, 1.15 and 0.84 respectively. Seasonal amount of evapotranspiration for Euroflor and Sirna varieties was equal to 601 and 575 mm, which was 26 and 30 percent less than seasonal ET0 in Isfahan. The average value of during the sunflower growing season was 0.77, which was greater than that offered by Doorenbose and Pruitt (0.55). As the crop coefficients of two varieties were different during the growing season and they were also different from FAO KC, measuring the actual amount of KC as a function of growing degree days can increase the accuracy of the estimated ETc and help develop the crop models in order to improve the irrigation management.
K. Asgari, S. H. Tabatabaei, P. Najafi, Sh. Kiani,
Volume 20, Issue 78 (Winter 2017)
Abstract
Constant use of treated wastewater (TWW) for irrigation over long periods may cause buildup of heavy metals up to toxic levels for plants, animals, and entails environmental hazards in different aspects. The aim of this study was to assess the effect of using a deep emitter installation on lowering the potential heavy metal accumulation in soil and wheat grain, and health risk under drip irrigation with treated municipal wastewater. A field experiment was conducted according to a split block design with two treatments (fresh and wastewater) and three sub treatments (0, 15 and 30 cm depth of emitters) in four replicates in Esfahan, Iran. Soil samples were collected before planting (initial value) and after harvesting (final value) in each year. Elemental concentrations (Cu, Zn, Cd, Pb, Cr, and Ni) in soil and grain were determined using an atomic absorption spectrophotometer. A pollution load index (PLI) showed that there was not substantial buildup of heavy metals in the wastewater-irrigated soils compared to the freshwater-irrigated soils. Cu, Pb, Cr and Zn concentrations in wheat grain were within permissible EPA limits, but concentrations of Cr was above the safe limits of EPA. In addition, concentrations of Ni in wheat grain were several folds higher than EPA standards. A health risk index (HRI) which is usually adopted to assess the health risk to hazard materials in foods showed values higher than 1 for Cd and Cu, whereas children might also be exposed to health risk of Cd, Cu and Cr. Based on aforementioned results, it can be concluded that the depth of emitter in drip irrigation does not play a significant role in the accumulation of heavy metals from TWW in our sandy loam soil.
Gh. H. Kiani,
Volume 22, Issue 1 (Spring 2018)
Abstract
Recently, virtual water trade has been introduced as a tool to solve the water scarcity of dry regions. The concept holds that water-rich countries and regions should produce and export water-intensive commodities to water-scarce countries and regions. In this study, the status of domestic and international virtual water trade was studied to assess water management in Iran in 2006 (which was considered as a normal year). The calculations showed that 18666 Mm3 of virtual water was traded through the exchange of agricultural products between the provinces. Fars and Tehran provinces were the largest exporter and importer of virtual water, respectively. Iran imported 9626 Mm3 and exported 2226 Mm3 of virtual water. Water footprint was 752 m3/cap/yr and water self-sufficiency was 82% in Iran. The virtual water content of the exported and imported products was 1159 L/kg and 677 L/kg, respectively. The results showed that water-scarce provinces such as Kerman, Hormozgan and Semnan were exporters of virtual water to other provinces and abroad, whereas water-rich provinces such as Guilan, Chaharmahal and Bakhtiari, Lorestan, Kordestan, West Azarbayjan, Kohgiloyeh and Boyr-Ahmad, and Kermanshah were the importers of virtual water. Therefore, water management can be improved by the improvement in international and inter-province virtual water trade. For this purpose, the cropping pattern and consumption pattern should be adapted to the virtual-water content of agricultural products for the long-term water conditions in Iran.
M. Shirmohammadi, A. R. Hossein Pour, Sh. Kiani,
Volume 22, Issue 3 (Fall 2018)
Abstract
Understanding the distribution of different P forms in soil aggregate fractions is important in evaluating the risk of P run-off and leaching in the agricultural soils. The objective of the present research was to determine the effect of aggregate size on soil phosphorus availability and fractionation in 10 calcareous soils. Micro aggregate (< 0.25 mm), macro aggregate (> 0.25 mm) and whole soil were separated by dry sieving. Olsen P, total P, organic P, and inorganic P fractions in micro aggregate, macro aggregate, and whole soil were determined. Soil inorganic P fraction was determined by a sequential extraction procedure including: dicalcium phosphate (Ca2-P), octa calcium phosphate (Ca8-P), apatite (Ca10-P), P absorbed by Al oxide (Al-P), P absorbed by Fe oxide (Fe-P) and P incorporated in to Fe oxide (O-P). The results showed that the amounts of (Olsen P), (Ca2-P), (Ca8-P), (Ca10-P), (Organic P), (Al-P), (Fe-P), (O-P) and (Total P) in 70, 60, 40, 40, 60, 70, 60, 50 and 70 percent of soils, respectively, in the micro aggregates were significantly higher than those of the macro ones. Finally, by increasing the P content, particularly the smaller sized aggregates, it was likely that the eroded material would favor greater P loss.
S. Ghasemi, A. Hosseinpur, Sh. Kiani,
Volume 22, Issue 3 (Fall 2018)
Abstract
The rate of metal transfer from the solid phase to solution is an important factor governing their concentration in the soil solution and its availability. In this research, the release rate of Zn in contaminated soils from Isfahan was studied using solutions citric acid, oxalic acid and malic acid 0/01 M during the period of 2 - 504 hours and its relationship with soil characteristics was investigated. The results showed that low molecular weight organic acids could release Zn in the contaminated soils. The Zn released by acids was in the order citric acid> oxalic acid> malic acid. Variation range of Zn released a solution of citric acid, oxalic acid and malic acid, which was 38/9 -21173, 25/2 - 26761 and 25/5 – 20650
mg/kg of soil. Zn released in citric acid solution was higher than that of the two acids. Based on the determination coefficient and standard error estimates done by the kinetic equations, the release of Zn of the contaminated soils and three acid solution was described by the first order equation, elovich, parabolic diffusion and power function, with a high coefficient of determination and a low standard error. Correlation results showed that for the Zn release with the index of Zn usability, there was a significant correlation at 5% level. Showed Multivariate regression model showed that Calcium carbonate, pH and EC affected characteristics of Zn desorption.
S. Z. Kiani Harcheghani, A. R. Hosseinpur, H. R. Motaghian,
Volume 23, Issue 2 (Summer 2019)
Abstract
Adsorption is one of the most important processes controlling the concentration of zinc (Zn) in the soil solution. The presence of nutrient anions in the solution can affect Zn2+ adsorption. In this study, the effect of orthophosphate, nitrate and chloride anions on the Zn2+ adsorption in five calcareous soil samples of Chaharmahal-va-Bakhtiari province was investigated. In order to study the Zn adsorption isotherms, solutions containing 25, 50, 75, 100, 150 and 200 mg/L Zn of ZnSO4 source were used in KH2PO4, KNO3 and KCl electrolytes (electrolytes concentration equal to 50 mM). The Freundlich, Langmuir, and linear equations were used to investigate the ability to describe the Zn adsorption. Based on the results, the Freundlich and Langmuir equations could describe the Zn adsorption. The results of this study showed that Zn in the presence of orthophosphate anion had the maximum adsorption capacity and an adsorption intensity higher than that of chloride and nitrate anions; meanwhile, in comparison with nitrate and orthophosphate anions, adsorption energy (k), maximum buffering capacity (MBC), and distribution coefficient (kf) in the presence of chloride anion were higher (p< 0.05). The results of this study, therefore, showed that in the presence of anion orthophosphate, Zn adsorbed more intensity and strongly, while adsorption energy was less than the presence of the other two anions. Therefore, it could be concluded that Zn and phosphate fertilizers should not be applied together in the soil.
M. Mohammadi, B. Lorestani, Soheil Sobhan Ardakani, M. Cheraghi, M. Kiani Sadr,
Volume 25, Issue 4 (Winiter 2022)
Abstract
Polychlorinated biphenyls (PCBs) can adversely affect human and environmental health according to long-term half-life and persistence in the environment. Therefore, this study was conducted to detect, identify, and health risk assessment of PCBs in surface soils collected from the vicinity of Arad-Kouh processing and disposal complex, Tehran, in 2020. A total of 30 surface soil samples was collected from 10 sampling sites near the Arad-kouh complex. After extraction of analytes, the gas chromatography/mass spectrometry (GC–MS) method was used to determine PCBs in soil samples. Based on the results, 15 congeners of PCBs were detected in the analyzed soil samples. Also, the minimum, maximum, and mean concentrations of total PCBs (µg/kg) were 269, 434, and 359, respectively. Moreover, the results of PCA and significant contribution values of low molecular weight homologs indicated that the presence of PCB compounds in the soil samples was connected with combustion processes in the soil. Besides, as among the detected PCBs, the TEF values only established for PCB105 showed that exposure to contaminated soil could be lead to a moderate level of carcinogenic risk through PCB105. Given that PCBs have adverse effects on the environment and human health, detecting, determining the concentration, source identification, and periodical monitoring of these compounds in different mediums to human health maintenance is strongly recommended.
N. Dalvand, S. Sobhan Ardakani, M. Kiani Sadr, M. Cheraghi, B. Lorestani,
Volume 26, Issue 3 (Fall 2022)
Abstract
Individuals spend a lot of time indoors, thus they can generally be exposed to polycyclic aromatic hydrocarbons (PAHs) as a teratogen, mutagen, and carcinogen pollutants with the potential for environmental and also human health risks. Therefore, the current study was performed to analyze PAHs in household dust samples of the city of Khorramabad, Iran in 2019. A total of 50 indoor dust samples were collected from 10 sampling sites. After the extraction of analytes, the gas chromatography/mass spectrometry (GC–MS) method was used to determine PAHs in the studied samples. All statistical analyses were performed by SPSS software. The results showed that 16 priority PAHs were detected in the samples with the minimum, maximum, and mean values of 14.0, 23.3, and 19.2 µg/kg. Also, based on the results the mean contents of detected PAHs were lower than the maximum permissible concentration (MPC) established by MHWS and Iran DOE. In conclusion, due to exposure risks of PAHs, regular and periodic analysis of these pollutants in different environmental samples including soil, sediment, dust, particulate matter, air, water, and tissues of living organisms for environmental and human health maintenance is recommended.
R. Hosseinpour, H.r. Asgari, H. Nikanhad Qermakher, E. Malekzadeh, M.k. Kianian,
Volume 27, Issue 4 (Winter 2023)
Abstract
The soils of desert areas are mostly low in organic matter and may fluctuate greatly in terms of acidity. Biochars are one of the materials used to improve and modify some soil characteristics. This compound is very resistant to decomposition and remains in the soil for a longer period, reducing agricultural waste and turning it into a soil conditioner. This leads to keeping carbon in the soil, increasing food security, increasing biodiversity, and reducing deforestation. In this research, an attempt was made to investigate the biochar of fodder beet plant waste produced at different pyrolysis temperatures and its physical and chemical characteristics. For this purpose, fodder beet wastes were collected from settlements around Birjand and after being crushed and air-dried, they were pyrolyzed in an electric furnace under limited oxygen conditions at a temperature range of 300-700 degrees Celsius. Then, the characteristics of the produced biochars were performed with 3 repetitions of measurements and statistical analyses with SPSS software. The results of this research showed that the characteristics of biochars changed significantly with temperature change. The highest yield percentage (59%), organic carbon (56.33%), total nitrogen (0.53%), water retention (0.84g/g) at 300 and 400 degrees Celsius, and the highest amount of ash (% 76), acidity (8.21) and electrical conductivity (0.1ds/cm) was obtained at a temperature of 700 degrees Celsius. The percentage of carbon and the efficiency of biochar produced at temperatures of 300 and 400 degrees Celsius were higher than other biochar produced at other temperatures. Biochar produced at 300°C has better characteristics in terms of carbon percentage and acidity efficiency compared to biochar produced at 400°C. Although these differences were not statistically significant, due to biochar production being more economical in terms of energy consumption, it is recommended to produce biochar at a temperature of 300 degrees Celsius.
