Showing 4 results for Koch
H Faghih, M Kholghi, S Kochekzadeh,
Volume 12, Issue 46 (1-2009)
Abstract
Overtopping is one of the main factors responsible for dam failure. To avoid overtopping, dam is equipped with one or some spillways to release the water impounded in the reservoir. The number and size of these spillways are determined on the basis of design flood. Determination of design flood of dam spillway can be formulated as a multiobjective risk problem. This problem can be solved by Quantitative Risk Analysis Methods. Here, four economical design methods which are based on risk analysis including, United States National Research Council (NRC), US Civil Engineering, Unit Curve and Partitioned Multiobjective Risk (PMR) were studied. In order to compare these methods, Risk Analysis was performed for re-determining design flood of Pishin Dam Spillway. This Dam has been constructed on the Sarbaz River. Owing to the fact that the integrals of the expected damage relations in the two methods, i.e., Civil Engineering, and Partitioned Multiobjective Risk are analytically unsolvable, Romberg numerical integration technique and Excel software were utilized for the related calculations and drawing graphs. Also, in order to select suitable distribution, the flood analysis was done using Smada software. The findings of the study indicated that design flood determined by the three methods, i.e., Civil Engineering, National Research Council and Unit Curve was almost the same, and that the amount of flood was less than the 10,000-year-old flood while design flood determined by Partitioned Multiobjective Risk Method, was larger than the 10,000- year-old flood.
A Kochaki, A Sadeghi, F Shahidi, A Mortazavi, M Nasiri,
Volume 13, Issue 47 (4-2009)
Abstract
This study was intended to use the sourdough LAB containing specific starter cultures for Barbari bread production and reduction of its staling. For sourdough preparation, fresh microbial cells were collected by centrifugation from LAB cultures. Then 1.5% of flour (w/w) from these washed cells with the same amounts of wheat flour and tap water and 0.25% (w/w) active dry yeast extract, containing Saccharomyces cerevisiae were mixed. The effects of fermentation time (8, 16 and 24 hours), fermentation temperature (28, 32 and 36 ºC) and type of starter culture (Lactobacillus sanfransicencis, Lactobacillus plantarum and a mixture of both LAB) were analyzed in a completely randomized design with factorial experiment with 4 replications. Bread staling was determined by its measuring crumb hardness and specific volume in 1, 24, 48 and 72 hours after baking. Correlation between variables was obtained by multivariate regression, and regression models were exhibited. The results showed that sourdough had significant effect (p≤0.05) on reduction of Barbari bread staling at 1, 24, 48 and 72 hours after baking in comparison with control sample. Moreover, the sample prepared with Lactobacillus plantarum (24 h fermentation time and 32 ºC fermentation temperature) had the maximum specific volume and the least staling, 72 hours after baking.
M. Iranpour Mobarakeh, M. Koch,
Volume 23, Issue 3 (Fall 2019)
Abstract
Deterioration of groundwater resources in coastal regions due to the progression of saline water in aquifers in these regions is currently one of the important issues in providing water needs in these areas. In coastal regions, saline water enters the aquifer from below in shape of wedge. Due to the difference in the density between fresh and salty water, an interface zone forms between two fluids. In order to better understanding the importance of this issue, experiments and numerical investigations of density-depended flow and transport through a tank filled with a variety of sand, are great help in achieving this. In this research, the real sand tank was simulated using SUTRA model. This simulation includes configuration, discretization, property assignment and boundary conditions determination. Finally, the transverse macro-dispersivity coefficient was estimated for different scenarios of the solute transport in this tank. The purpose of this research is to analyze of the solute dispersion, in mixing salt and fresh water, and the effect of seepage velocity, concentration of pollutant source and heterogeneity of porous media on the flow dispersivity property. In this research, after studying the effect of different boundary conditions in SUTRA model on the development of the salt water plume, simulation of the model of heterogeneous sand tank and comparing its results with laboratory model and homogeneous model were performed. As a practical result of this research, the diagram of changes in the coefficient of transverse dispersivity against the source concentration and seepage flow velocity was plotted. In numerical simulation of heterogeneous Porous media, for all concentrations, with the exception of the concentration C0= 35000, with increasing flow velocity, the values of the transverse dispersivity coefficient AT calculated by SUTRA decreased. Also AT for all seepage velocities, with the exception of seepage velocity u=4 m/day, increased with increasing source concentration. Also, the values obtained AT from the SUTRA model were more than the values of AT obtained from experiments. In numerical simulation of the homogeneous porous media, for all velocities, as the concentration source C0 increases, the transvers macro dispersivity coefficient AT increases. According to the applied results, suitable solutions can be found to improve the quality of groundwater and prevent the mixing of fresh and saltwater resources.
M. Iranpour Mobarakeh, M. Koch,
Volume 23, Issue 4 (winter 2020)
Abstract
Nowadays, with the increasing population in Iran, especially in arid and semi-arid areas, as a result of the growing importance of the quality of water resources, including groundwater, field experiments and many simulations have been conducted for the development of groundwater contamination through powerful and up- to- date software. However, in most cases, there is a tangible difference between the measured data in laboratories and the data produced with software; this is why the scientific validation and verification of the research results could be declined. In this study, in order to justify and correct these data, the calibration principle was used to minimize the error of testing and modeling. The purpose of this study was to validate and verify the SUTRA model for different scenarios of the solute transport in a sand tank with heterogeneous hydraulic conductivity to evaluate transverse dispersivity. In this study, coding was initially performed for the configuration and calibration of the SUTRA numerical model to simulate different scenarios of the solute transport in a heterogeneous sand Tank in the Hydraulic Laboratory of the University of Kassel, Germany, until acceptable values were obtained. Then the results were compared with the experimental model. In order to validate and verify the data obtained from the simulation with the SUTRA model, the relevant concentration profiles were compared with the results of the experimental model. The results of the numerical and laboratory models revealed the density effects by sinking the geometric center of the mixing zone for the low concentrations of salt, C0 = 250 ppm. The results also showed that the width of the mixing zone between salt and fresh water depended on the amount of longitudinal dispersivity, especially the transverse dispersivity. By analyzing the results of simulation and experiment, it was observed that with increasing the velocity, reducing the amount of sinking and raising the input concentration, the time needed to achieve the steady dispersion was decreased.
