Showing 14 results for Mobli
A. Dehdari, A. Rezai, M. Mobli,
Volume 5, Issue 2 (summer 2001)
Abstract
In order to evaluate the morphological and agronomic characteristics of 19 land races of onions and one foreign cultivar (Yellow Sweet Spanish), an experiment was conducted in 1998 at the Research Farm of the College of Agriculture, Isfahan University of Technology.
Analysis of variance showed significant differences among genotypes for all of the morphological and agronomic traits. Dry weight and number of days to emergence had the highest and lowest coefficients of genetic variability, respectively. Plant fresh weight, yield of 30 plants and total yield also had high coefficients of variability. Broad sense heritability estimates were high for all of the traits, indicating low environmental affects them. Based on cluster analysis and plot of the first two canonical variables, the genotypes were classified in four groups with different agronomic traits. Canonical discriminant analysis based on nine agronomic traits introduced three canonical variables which justified 99.9 percent of the total variation among characters. Principal component analysis revealed four components while factor analysis showed three factors which explained 87.3 and 95.5 percent of the total variation among characters, respectively. The first and second factors were related to adaptation and assimilate translocation, respectively. Bulb diameter, bulb height and bulb weight in positive directions and sensitivity to Fusarium in negative direction had greater loads in the third factor.
A. Dehdari, M. Mobli, A. Rezai,
Volume 5, Issue 4 (winter 2002)
Abstract
In order to determine the relationships among the different traits of onion and to study the direct and indirect effects of these traits on bulb and seed yield, an experiment was conducted in 1998 at the research farm of Isfahan University of Technology. Results showed that phenotypic and genotypic correlations were similar and bulb weight showed the highest and lowest coefficients of correlation with bulb diameter and number of days to emergence, respectively. Results of stepwise regression analysis showed that leaf width at 25% of its length from the neck, leaf length, and leaf dry weight were the best estimators for leaf area bulb diameter, bulb length, plant height and number of days to maturity were the most important determining characters for bulb yield variation. Number of fertilized florets was the best determinator of seed yield and bulb weight, while diameter and volume were the best describing characters for the number of meristems on the basal plate. Path-coefficient analysis revealed that bulb diameter showed the highest direct positive effect on bulb yield and the indirect effect of plant height through bulb diameter on it was of prime importance. Number of fertilized florets per plant and number of inflorescence per plant through the number of fertilized florets showed the highest direct and indirect effects on seed weight, respectively.
S. Vaseghi, M. Afyuni, H. Shariatmadari, M. Mobli,
Volume 7, Issue 3 (fall 2003)
Abstract
Excessive application of sewage sludge leads to the accumulation of potentially toxic elements in soils. The objective of this greenhouse study was to examine the DTPA–extractability of Fe, Zn, Cu, Mn, Pb, Cd, Ni, and Co in relation to soil pH and to investigate the concentrations of these metals in corn (Zea mayz). The study was conducted using a factorial experiment in a completely randomized design with three replications. Sewage sludge was applied at 0, 50, 100, and 200 t/ha on four soils [Langaroud (pH= 4.8), Lahijan (pH= 5.7), Rasht (pH= 6.8), and Isfahan (pH= 7.9)]. Application of sewage sludge significantly increased DTPA-extractable Fe, Zn, Cu, Pb, Cd, and Ni in all soils. The increasing effect was in accordance with sludge level. Langaroud soil had the highest and Isfahan soil the lowest levels of DTPA-extractable metals. Application of sewage sludge increased plant growth and metals in the foliage of corn plants. The metal concentration in corn tissues also increased with decreasing soil pH. Overall, the application of sewage sludge as an organic material, particularly in acid soils, may increase availability of heavy metals, which may, in turn, result in soil pollution. Therefore, addition of sewage sludge to soils should be managed on the basis of the changes in soil heavy metal concentration.
S. Seyedebrahimi, R. Ebadi, M. Mobli, B. Hatami,
Volume 8, Issue 1 (spring 2004)
Abstract
In order to study the nectar quantity and quality of some onion cultivars and honeybees foraging activity on them, a complete randomized block design with three replications was conducted. Ten selected onion cultivars consisting of Ghom, Kashan, Azarshahr, Dorcheh, Tarom, Kazeroon 1, Kavar, Abarkooh, Hurand, and Yellow Sweet Spanish were used. Sixty mm mother bulbs of different onion cultivars were planted in 3×4 m plots on 6 lines. The distance between rows was 35 cm and plants were spaced 25 cm apart on each row. At flowering time, bees’ activity on the inflorescences was studied and flower nectar was collected in 10 micro-liter capillary tubes. Nectar volume was determined and analyzed. Mean numbers of honeybees visiting on inflorescence every 10 minutes and the mean residing time of each honeybee on a seed stalk (inflorescence) were significantly different in different cultivars. Hurand flowers had the least number of visitors and Dorche flowers had the longest visiting time. The amount of nectar varied in different cultivars, so did glucose (G), fructose (F), and sucrose (S) contents. Except for the Abarkuh cultivar that had more glucose than it had other sugars, all the cultivars had higher quantities of fructose than they had other sugars while sucrose had the least quantities among the sugars. Nectar sugar ratio in most of the cultivars was hexose dominant, which was identified by the low S/(F+G) ratio. Potassium, calcium, and sodium contents in nectar were different in different cultivars, too. Finally, the results showed that foraging activity of honeybees on onion inflorescences depends on the interactions of several factors such as nectar quantity and, more importantly, on sugar quantity and ratio as well as potassium content. .
M. Sharifi, M. Hajabbasi, M. Kalbasi, M. Mobli,
Volume 9, Issue 1 (spring 2005)
Abstract
Potato (Solanum tuberosum L.) has relatively weak root system and requires high nitrogen fertilizer which is costly and may pose environmental pollution. This study was conducted to compare root morphological characteristics and nitrogen uptake of some potato cultivars growing in Iran. A greenhouse experiment using a completely randomized design with 3 replications and 8 potato cultivars including: Arinda, Agria, Premiere, Diamant, Concord, Marfona, Marodana and Nevita was conducted at Isfahan University of Technology, Isfahan. Virus-free seed tubers were planted and grown up to flowering stage. The plants were then harvested and their root length (RL), root average diameter (RAD) and root surface area (RSA) were determined using a Delta-T Scan image analysis system and Windias software. Root length density (RLD), root length and shoot weight ratio (R/S) were also calculated. Dry mater production and nitrogen accumulation (total nitrogen uptake) (PNA) were also determined. Soil inorganic nitrogen was measured before planting and after harvest. All measured parameters, except RAD, were significantly (p<0.05) affected by cultivar. Large differences observed between cultivars for all traits indicated genetic diversity among the studied potato cultivars. The highest and the lowest values of RL, RLD, RSA, R/S, RDW and PNA were found in Marfona and Nevita respectively. Based on cluster analysis, cultivars were divided into four different groups. Under the condition of this study, Marfona was superior whereas Arinda, Nevita, Marodana and Agria were inferior. Due to the high differences in root morphological characteristics and nitrogen uptake among potato cultivars, plant breeders may produce cultivars with larger root volumes and high nitrogen uptake.
M. A. Nazari, H. Shariatmadari, M. Afyuni, M. Mobli, Sh. Rahili,
Volume 10, Issue 3 (fall 2006)
Abstract
Sewage sludge and effluents, as cheap sources of irrigation water and fertilizer, can supply plants with water and nutrients however, contamination of these sources with heavy metals and the possibility of human food chain contamination using these sources should be considered. In this research, the effects of industrial sewage sludge and effluents on concentration of some nurtients, heavy metals and sodium and dry matter yield of wheat (Triticum aestivum), barley (Hordeum vulgare) and corn (Zea mays) were investigated. The experiment was carried out in a greenhouse using a complete randomized design with four replication. The treatments comprised well water, well water + sewage sludge(50 tons/ha), and three industrial effluents from Iran Polyacryl factory including the cooling tower, the over flow and the factory outlet effluents. Chemical analysis showed the following results: The concentration of the elements in the sludge and the effluents were below the critical contaminating levels. The application of the treatments did not supply enough nitrogen for corn the cooling tower effluent could not supply enough nitrogen for wheat and barley all the treatments supplied enough P for wheat. None of the treatments could supply enough P for corn. The cooling tower, over flow and the factory outlet effluents could not supply enough P for barley, the micronutrient and heavy metal concentrations in the plant tissues using the effluents and the sewage sludge were higher than those for well water the dry matter yield of plants’roots and shoots was highest using well water + sludge and in comparison with the well water, effluents could increase the shoot dry matter yield.
Z. Adavi, M. Mobli, K. Razmjoo, E. Landi,
Volume 10, Issue 4 (winter 2007)
Abstract
In order to study the effects of salinity of irrigation water on the growth and quality of 10 bermudagrass cultivars under saline soil, a factorial plot experiment using a complete randomized block design with three replications was carried out at College of Agriculture, Isfahan University of Technology in 2002-2003. Ten cultivars under five levels of irrigation water salinity (3.30, 6.93, 10.2, 14.8, 17.8 dsm-1) were studied. During experiment, visual appearance of color (1 to 9, best 9), and leaf area, shoot and root dry weights and length and number of stolones were measured. Results showed that salinity of irrigation water affected color of different cultivars, such that with increase in the level of salinity, color decreased. Cultivars showed better color in August, but lower color in January. Annual mean indexes showed that ISF2 and Tifdwarf had highest and lowest color, respectively. Also, with increase in salinity levels, leaf area, foliage dry weight, length and number of stolones reduced. With increase in salinity of irrigation water from 3.30 to 10.2 dsm-1 root dry weight increased, but reduced in higher salinity levels. Due to significant interaction effects between salinity and cultivars for most traits, the responses of cultivars were different. Large differences observed between cultivars for most of traits indicated high genetic variation among the studied bermudagrass cultivars. Under high level of salinity conditions, JP2 and Tifway for foliage dry weight, 3200W18-4 and ISF2 for root dry weight, and cultivars Midlawn and 3200W18-4 for leaf area, were recognized as more tolerant than others.
M. R. Pordel, B. Hatami, M. Mobli, R. Ebadi,
Volume 10, Issue 4 (winter 2007)
Abstract
Canola (Brassica napus) is one of the important oil seed crops cultivated in many parts of Iran. One of the main problems of seed production of canola is pollination and fertilization of flowers. Insects are the major pollinators. In order to study the fauna of insect pollinators of 3 cultivars of canola including Talaye, Okapi and S.L.M. and the difference between the attractiveness of these cultivars to insects during the flowering period, insects were collected by sweeping net and identified. Their abundance was determined at different periods of time during a day. Results showed that insect pollinators belonged to five orders and 18 families. The most abundant pollinators were Hymenopterous insects specialy honey bees (Apis mellifera) which were about 50%. Irrespective of Apis mellifera, the most abundant insects captured belonged to Diptera. Three Dipterous insects, Bibio hortulanus, Metasyrphus corollae and Platypalpus sp. were collected and identified. During the flowering period (March to mid April) in Isfahan, honey bees were more abundant in the warmer hours of the day, mostly noon and afternoon, but were less active in the early hours of the day, morning, because of cold weather and low nectar production. Honey bees were more active than other pollinators on Talaye at 9 a.m. and on Okapi at mid-day, noon, and during afternoon. Results also showed that insect pollinators could increase seed yield by 53%.
M. R. Pordel, R. Ebadi, M. Mobli, B. Hatami,
Volume 11, Issue 40 (summer 2007)
Abstract
Pollination and fertilization of canola flowers are the main factors of canola seed production. In order to study the effects of insect pollinators on seed quantity and quality of three chosen cultivars of canola, namly, S.L.M., Okapi and Talaye, a split plot experiment in a complete randomized block design with four replications was carried out in Isfahan region. Main plots consisted of canola cultivars, and subplots consisted of open pollination and non-pollination by insects. Results indicated that the time to seed ripening in pollinated plots was 10.5 days less than those of non-pollinated plots. Pollination by insects increased the number of pods per plant, number of seeds per pod and weight of 1000 seeds, by 14.3%, 23.5% and 10%, respectively. Grain yield also increased by 53% in pollinated plots. Pollination decreased seed moisture percentage by 3.15%, but its effect on seed oil percentage and germination percentage were not significant. Time to seed germination of plants of pollinated plots decreased three hours. Cultivars were significantly different in seed oil percentage and time to seed germination. Talaye cultivar produced the highest amount of oil (45.5%), while Okapi produced the lowest (40.8%). There were significant interactions between cultivars and pollination in terms of seed ripening, oil percentage and moisture of seeds, and the effects of pollination was different in different cultivars.
M. Ghasemi Varnamkhasti, H. Mobli, A. Jafari, M. Heidari Soltanabadi, Sh. Rafiee,
Volume 12, Issue 44 (summer 2008)
Abstract
Rice whitening is an important stage in rice milling process and improvement of the whitener machines has a remarkable effect on rice loss. To decrease the amounts of broken rice and losses, the rotor of the blade whitener was equipped with screw conveyor. To investigate the effects of rotor speed (in four levels: 600, 700, 800 and 900 rpm) and output rate (in three levels: 400, 500 and 600 kg/h) on quality of milled rice, a factorial design with randomized complete block experiments with three replications were conducted. In this study, Sorkheh variety (a medium rice variety), which is one of the prevailing varieties in Esfahan, was used. The results showed that the lowest breakage percentage (20.92%) occurred at rotor speed of 700 rpm with an output rate of 600 kg/h and the best degree of milling (6.33%) took place at rotor speed of 600 rpm with an output rate of 400 kg/h. The best rice quality (low broken rice and high degree of milling) was observed at rotor speed of 600 rpm with 500 kg/h output rate.
S. M. Mansouri, M. Mobli, R. Ebadi, A. Rezai,
Volume 12, Issue 45 (fall 2008)
Abstract
Because of many small florets and protandry, cross pollination in onion which is a biennial plant, by using polycross method for breeding is suitable and easy. To produce polycross seed, bulbs of 9 self onion genotypes were planted in the shape of equilibrium lattice design for 9 treatments with 10 replications on May 2002. To study some agronomical characteristicss, the polycross seeds produced from free pollination and original self-fed seeds (totally 18 genotypes) were planted in plots as a randomized block design with four replications. Samples were taken from each plot and different characteristics were measured. Results showed that polycross generally increased plant fresh and dry weight, plant height, percentage of off type bulbs and yield, with no effect on bulbing ratio and time to ripening. Although polycross increased most agronomical characteristics and yield in Kashan, Azarshahr and Kazeroon genotypes, in some genotypes little increase or even negative effects resulted due to interaction between genotype and polycross. With more assessment of polycross genotypes, good characteristics will be fixed and seeds with higher qualities will be produced.
M. Mehrparvar, M. Mobli, B. Hatami,
Volume 12, Issue 45 (fall 2008)
Abstract
Rose is one of the most important ornamental shrubs of the world because of its durability, long period of flowering, different cultivars and its beauty. The rose aphid, Macrosiphum rosae is the most important pest of the rose which causes significant economic damage annually. In order to compare four rose cultivars including Black Magic, Caramba, Noa and Good Life, and a wild rose, Nastaran, infested with rose aphid, a split-plot in time experiment was arranged in randomized complete block design layout with three replications, in Isfahan (Iran) from February 2004 to March 2005. The infestation levels of roses with the rose aphid and its seasonal fluctuations were determined by weekly sampling. Analysis of data showed that there are significant differences (P<0.01) between cultivars. Noa (with pink flowers) has the highest infestation of rose aphid (with average 23.12 ± 0.036 aphids) and Caramba (with yellow flowers) has the lowest infestation (with average 6.46 ± 0.036 aphids). The wild rose, Nastaran, showed low infestation (with average 8.76 ± 0.036) as well. Different sampling times also showed significant differences (P<0.01). There was a significant interaction (P<0.01) between cultivars and sampling date, such that reactions of cultivars to aphid (nymphs, adults and total) were not similar in different sampling dates. Seasonal fluctuations of the rose aphid showed two peaks in a year, in May and December. Activity of the rose aphid in spring which coincides with rapid growth and tenderness of rose foliage causes severe fading and inhibiting of floral opening.
S. M. Mansouri, R. Ebadi, M. Mobli,
Volume 12, Issue 45 (fall 2008)
Abstract
Onion thrips (Thrips tabaci Lind.) is one of the important factors which indirectly restrict the proper yield of onion (Allium cepa L.). Therefore, finding tolerant cultivars to onion thrips is important. Because of many small florets, cross pollination in onion which is a biennial plant by using polycross method for breeding is suitable and easy. To produce polycross seed, bulbs of 9 self pollinated onion genotypes were planted in the shape of equilibrium lattice design for 9 treatments in May 2002. To study tolerance to onion thrips and assess other agronomical characteristics, the polycross seeds produced from free pollination and self pollinated plant seeds (totally 18 genotypes) were planted in a randomized block design with four replications. The main plots were sprayed and not sprayed, and sub-plots were onion genotypes. From August to October 2003, samples were taken from each plot bi-weekly, and number of thrips, and percentage of injury on plants were recorded. As a result of this study, Azarshahr self pollinated genotype showed maximum population density of thrips (22.24) and injury, but Ghom and Abarkooh genotypes showed the lowest amount (2.65 and 5.68 respectively) among all genotypes. Among pollycross genotypes, Ghom and Kashan genotypes showed low population densities (4.3 and 4.24 respectively) and injury, but Azarshahr and Tarom showed high population densities (20.66 and 19.84 respectively) and percentage of injury. Generally, polycross reduced population density of thrips and percentage of injury.
J. Khajehali, M. Kohansal, B. Hatami, M. Mobli,
Volume 22, Issue 2 (Summer 2018)
Abstract
The grape leafhopper, Arboridia kermanshah Dlabola (Hemiptera, Cicadellidae), is an economically important pest of most vineyards in Isfahan. The effects of two irrigation regimes [normal (100 liter/ tree/ week) and minimum (100 liter/ tree/two weeks)] seasonal population changes and the damage of A. Kermanshah as well as the percentage of leafhopper egg parasitism by Anagrus atomus were studied on five grape cultivars including Shahani, White Rishbaba, Askari, Black Rishbaba and White Yaghoti; this was done in a completely randomized blockdesign with split plots in three replications at Isfahan University of Technology in the 2005-2006 period. Adults and nymphs were assessed by weekly sampling using a vacuum insect collector (D-VAC). Non-parasitized and parasitized eggs were counted weekly by clipping three leaves from different strata of vine canopy as a sample unit, in each plot. The results showed that the leafhopper population density, damage percentage and egg parasitism in both years of study in the normal irrigation plots were higher than those with the minimum irrigation. The maximum density of adults and nymphs was observed in June and early July on the White Yaghoti. The highest egg density and parasitism were recorded in June and October-November, respectively, on black Rish-baba in the normal irrigation. The highest damage was on the white Yaghoti in August and September, and the lowest damage was on Askari and Shahani, both in the normal irrigation regime.