Showing 5 results for Rafiee
Sh. Rafiee,
Volume 10, Issue 3 (fall 2006)
Abstract
Rapid drying can increase brittleness of and induce internal cracks in the grain which predispose the product to breakage during subsequent activities. To fully understand the drying process requires an accurate description of the drying mechanism. Kernel equilibruim moisture content (EMC) is a property strongly related to agricultural products drying phenomena. Its accurate prediction can lead to optimisation of drying processes, especially in highly automated computer aided drying systems. In this study, a finite element formulation and solution of a set of coupled conductive heat and diffusive moisture transfer equations, to improve grain drying simulation of axisymmetric bodies are presented. Axisymmetric linear triangular elements with two degrees of freedom per node are used to discretize the rice grain in model for different equilibrium moisture content (from 7.5 to 0.12 d.b.%). For the purpose of this study, one medium grain, ‘Sepidrod CV.’, was used. During the thin layer drying, the drying air temperature of 69 °C and initial moisture content of 17.23 d.b.%, were adopted. A high relation has been observed when the output of model with 11.5 d.b.% EMC was compared to experimental data obtained by others. The least and most root mean square error analysis (RMSE) calculated for models at different EMC with experimental data were 0.0091 and 0.1025. The least and most mean relative deviation modulus were 1.394 and 5.129, respectively. Considering the mean errors of the models in relation to the obtained experimental data, the equilibrium moisture content for 11.5 d.b gave the best result.
M. Ghasemi Varnamkhasti, H. Mobli, A. Jafari, M. Heidari Soltanabadi, Sh. Rafiee,
Volume 12, Issue 44 (summer 2008)
Abstract
Rice whitening is an important stage in rice milling process and improvement of the whitener machines has a remarkable effect on rice loss. To decrease the amounts of broken rice and losses, the rotor of the blade whitener was equipped with screw conveyor. To investigate the effects of rotor speed (in four levels: 600, 700, 800 and 900 rpm) and output rate (in three levels: 400, 500 and 600 kg/h) on quality of milled rice, a factorial design with randomized complete block experiments with three replications were conducted. In this study, Sorkheh variety (a medium rice variety), which is one of the prevailing varieties in Esfahan, was used. The results showed that the lowest breakage percentage (20.92%) occurred at rotor speed of 700 rpm with an output rate of 600 kg/h and the best degree of milling (6.33%) took place at rotor speed of 600 rpm with an output rate of 400 kg/h. The best rice quality (low broken rice and high degree of milling) was observed at rotor speed of 600 rpm with 500 kg/h output rate.
H Amirnejad, H Rafiee,
Volume 13, Issue 48 (7-2009)
Abstract
Land and its size are important as the most basic factors of production in agriculture .Fragmentation is one of the main problems that rice producers of Mazandaran province are confronted with. Non-efficiency in farm management, inability in effective using of agriculture technology and machinery, and low range productivity of production are all related to land fragmentation. In order to overcome the problems and consequences originating from land fragmentation, specialists recommend the logical solution of land consolidation process, which is a basic strategy for changing the farm size. The purpose of this research was to identify and determine effective factors in land consolidation adoption by rice producers in Mazandaran province by using Logit Regression model. In this study, 150 rice producers from 5 villages have been investigated since 2007. Results show that variables of education, land quality, fragment distance and extension effort (learning programs) are the most important factors in land consolidation adoption by rice producers in this province (Sig=1%) . Also, number of the household and credit support are the next factors affecting in land consolidation adoption (Sig= 5%). I t must be noted that other variable such as age, farmer’s income, children education, experience of rice producers, cultivation area, membership in cooperatives, land situation, number of pieces and technical supports were not significantly involved.
S. P. Mousavi, M. A. Asghar Mokhtari, Y. Khosravi, A. Rafiee, R. Hoseinzade,
Volume 22, Issue 2 (Summer 2018)
Abstract
In this study, the distribution of heavy metals pollution including arsenic, antimony, nickel, copper, cadmium, cobalt, bismuth, lead and zinc in the stream sediments of Zarshuran- Aghdarreh area was investigated by using statistical techniques and the geometric integration of each sample basin. For this purpose, the degree of pollution in 154 stream sediment samples was analyzed and the distribution maps for enrichment factors were prepared by using a combination technique, pixel estimation, and statistical and geostatistical methods. The results of calculating the enrichment factors indicated that the higher enrichment was related to arsenic, antimony, bismuth, cadmium and lead. Furthermore, the concentration of zinc, copper, lead, arsenic, antimony, cadmium and bismuth in the stream sediment samples was higher than the global average. Application of the principal component analysis on the data led to the recognition of 9 main components for the dataset; the first 5 were components with eigen values greater than 1 and a cumulative percentage more than 85%. Arsenic, antimony, cadmium, lead and zinc in the first component, cobalt in the second component, bismuth in the third component, copper in the fourth component and nickel in the fifth component had the highest values.
Z. Nazari, M. Moeinaddini, S. Zare, R. Rafiee,
Volume 27, Issue 1 (Spring 2023)
Abstract
Due to the environmental problems caused by wind erosion, it is necessary to stabilize the dust centers with mulches. The objective of the present study was to determine and compare the optimum vinasse mulches based on mechanical indicators for sensitive soil stabilization to wind erosion. In this research, vinasse (0, 100, 200 g) is combined with bagasse (0, 25, 50 g), ash bagasse (0, 25, 50 g), filtercake (0, 12.5, 25 g), and one-liter water (81 treatments). At first, the treatments were determined in the appropriate range of salinity and acidity (35 treatments) and in the next step, the mechanical indicators have been measured after mulching on laboratory trays (2×30×100 cm). Optimum mulches have been determined based on five indicators by mean comparison (Duncan). The mean comparison showed that treatments 33, 30, 34, 32, and 19 show the mean difference between the groups based on layer thickness, impact resistance, compressive strength, and shear strength properly. It can be concluded that vinasse (100 and 200 g) with 50 g bagasse reduces the crack coefficient greatly, and the application of vinasse, bagasse, and filtercake does not affect the compressive strength and impact resistance.
