JWSS - Journal of Water and Soil Science

---

The objective of this research was to evaluate bromide leaching in a field under corn, wheat and alfalfa. Potassium bromide (300 kg/ha) was uniformly applied and 15 mm of water was sprinkled over the plots in the first and second years. Plots were leached 8 times during the first year and 9 times in the second year (each time with 100 mm of water). Soil samples were collected at 0-30, 30-60, 60-90 and 90-120 cm depths two days after each leaching practice. Bromide concentration in soil samples was measured using an ion selective electrode. Moisture content in each plot was measured using a neutron meter to a depth of 120 cm and after calculation of evaporation from soil surface, the net water applied was determined. CXTFIT software and Regional Stochastic Model (RSM) were used to simulate leaching under field conditions. The results showed that flow velocity and dispersivity of treatmens were not significantly different from the control in the first year, indicating that treatments had no effect on preferential flow. Control treatments were not significantly different in the first and second years. In the second year, flow velocity in wheat, corn and alfalfa treatments were 1.54, 1.86 and 2.21 times higher than flow velocity in the control, respectively. Dispersivity in alfalfa and corn treatments were 4.30 and 5.30 times higher as compared to the control. The increase in flow velocity and dispersivity is caused by an increase of preferential flow in the second year. The root channels remaining in soil at the end of the first year may also have increased preferential flow. After adding 25 cm of water, 30% of bromide leached from the top 50 cm soil in all plots in the first year and control plots in the second year but the values in the second year were 47, 67 and 70% of bromide leaching from the top 50 cm soil in wheat, corn and alfalfa plots, respectively.

---

In recent decades, the use of nitrogen fertilizers has increased irrespective of their effects on soil properties, agricultural products and, particularly, on environmental pollution. Nitrate easily leaches from soils into groundwater. The objective of this study was to determine temporal and spatial nitrate concentrations in groundwater in agricultural, industrial and urban regions in some parts of Isfahan Province. Water samples were collected monthly from 75 agricultural, industrial, and urban wells of Isfahan, Najaf-abad, Shahreza, Natanz and Kashan during January-May 2001. The results indicated that NO₃-N concentrations in most of the regions studied were higher than the standard level (10 mg/l) and nitrate pollution must be reckoned among the most serious problems of sustainable agriculture and exploitation of groundwater resources. Average NO₃-N concentration in different wells ranged from 1.03 to 50.78 mg/l (4.64 to 228.5 mg/l as nitrate). The average NO₃-N concentration in groundwater of Najaf-abad, Shahreza, Isfahan and Natanz-Kashan was 17.56, 14.6, 16.04, and 8.24 mg/l and 95.5, 100, 84 and 33.3 % of total wells in these regions had nitrate concentrations above the standard level, respectively. Maximum NO₃-N concentration was detected in the agricultural region south of Najaf-abad (64.6 mg/l). Nitrate pollution in most of the sampling areas was mainly linked to agricultural activities. The average NO₃-N concentration in groundwater of all agricultural, industrial, and urban regions, except for urban regions of Natanz and Kashan, were above the standard level. Generally, nitrate concentration level in groundwater increased with time and was maximum in March and April.

---

Because of slight variation of the static head due to discharge fluctuations, the labyrinth weirs are considered to be economical structures for flood control and water level regulation in irrigation networks, as compared to other devices. Labyrinth weirs are composed of folded sections observed as trapezoidal and triangular in plan view. In this study, rectangular and U-shaped labyrinth weirs were investigated. Experiments were conducted on 15 labyrinth weir models. The models included eight rectangular labyrinth models and six U-shaped labyrinth models with different heights and lengths, and one linear model. All the experiments were performed in a horizontal rectangular flume, 7 m long, 0.32 m wide and 0.35 m high. The results indicated that for all the models, discharge coefficient increased sharply with an increase in Ht/P and attained a maximum value. This coefficient then decreased smoothly with a further increase in Ht/P. Increasing height of weirs increased the discharge coefficient for both rectangular and U-shaped weirs. The results also showed that increasing the length parallel to the flow direction decreased and increasing the length perpendicular to the flow direction increased the discharge coefficient. Generally, the discharge coefficient for rectangular weir was less than that of the U-shaped weir. The obtained results compared with those of Tullis et al. (1995) showed that discharge coefficient for U-shaped weir is more and for rectangular weir is less than that of the trapezoidal weir for angle of the side legs of 8 and 12 degrees.

---

Cultivation of a second crop in paddy fields of Guilan province is a strategy for optimum use of land, supporting family economy and increasing oil-seed production. However, this is impeded under high rainfall and waterlogging conditions. To enhance second-crop cultivation in paddy fields, surface drainage is inevitable. The surface drainage practices should be performed with minimum costs, least time span and least variations of the land. In the present research, longitudinal surface drains were constructed with a spacing of 2, 4, 6, 8 and 10 m (depth of 20 cm), with and without 1-m lateral drains (depth of 10 cm) in Rice Research Institute, Rasht, Iran. The experiment was conducted in a complete randomized block design with three replications. Canola (Brassica napa), variety PF, was cultivated as a second crop after rice. The results showed that the effects of drain spacing on seed yield, days to maturity, number of plants per m², and also the effects of lateral drainage on seed yield, plant height, residual N, days to maturity, and number of plants per m² are significant (P<0.01). Highest yield (2493 kg/ha) was obtained from longitudinal drains 4 m apart, with lateral drainage drain spacing of 6 and 2 m had acceptable yields, too (2241 and 1817 kg/ha, respectively). For treatments without lateral drainage, 2-m drain spacing had the highest yield (1324 kg/ha). Considering all the expenses for drainage construction, it was found that net benefit of longitudinal drain spacing of 4 and 6 m was twice the costs. Since the rainfall in Nov., Dec., and Jan., 2000, was higher than the 20-year average rainfall of the same months, it was concluded that the results of this experiment may be recommended in the years with a rainfall less than the year 2000.

---

Accumulation of heavy metals (HMs) in cultivated soils is an important environmental problem in many parts of the world. In recent years, HM leaching through preferential paths and also in the form of metal-organic acids complexes has received much attention. For this reason, the effects of plants on creating preferential flow through the soil is important. The objective of this study was to assess the mobility of Cd, Cu, Pb and Zn in a calcareous soil (Typic Haplocalcids) planted with safflower (Carthamus tinctorious). The study was conducted on 12 undisturbed soil columns (22.5 cm in diameter and 50 cm in depth) in greenhouse. The top 10 cm of soil in half of the columns were contaminated with Cd, Cu, Pb, and Zn at the rates of 19.5, 750, 150 and 1400 kg ha^-1, respectively. Half of the contaminated and uncontaminated columns were planted with safflower at a rate of 20 seeds m^-2. Leachate was collected continuously and analyzed for these four heavy metals. After the crop harvest, soil samples were taken at 10 cm intervals and analyzed for DTPA-extractable and water-soluble HMs concentration. Results showed that heavy metal concentrations (DTPA and soluble) of the subsoil in planted columns were more than in fallow columns. The DTPA-extractable Cd, Cu and Zn concentrations in contaminated planted columns were 3.3-, 1.5- and 1.5-times more than in contaminated fallow columns, respectively. The water-soluble Cd, Cu and Zn in planted treatments increased 2.4, 1.2- and 1.1 times more than the fallow treatment. Lead concentrations in both planted and fallow treatments were similar. Metal uptake by safflower increased such that Cd and Zn uptake was more than Cu and Pb. Cd, Cu, Pb and Zn concentrations in the leachate of planted columns increased 32.0-, 2.5-, 6.0- and 2.7- time more than the uncontaminated planted columns. In summary, although topsoil contamination increased metal uptake by safflower, however the presence of safflower increased DTPA-extractable and also soluble metal concentrations in the soil profile and therefore enhanced metal mobility. The order of metal mobility was Cd > Zn >Cu >Pb.

---

To investigate yield and water use efficiency (WUE) of potato with tape and furrow irrigations, an experiment was performed at Hamadan Agricultural and Natural Resources Research Center (Ekbatan station) in 2004. The experiment was arranged in a split-plot experimental design based on completely randomized block with 3 replications of irrigation water amount as the main factor (75%, 100%, 125% of cumulative evaporation from class A pan) and sub-factor of irrigation method [including tapes in the middle of furrow ridge on soil surface (T_D0), tapes in the middle of furrow ridge at the depth of 5 cm (T_D5), tapes on the sides of furrow ridge on soil surface (T_S0), and furrow irrigation (F)]. The results indicated that yield of potato increased with increasing water use. Regardless of irrigation method, maximum (32.51 ton/ha) and minimum (19.33 ton/ha) yield of potatoes was achieved with 125% and 75% irrigation water treatments, respectively. The lowest yield (21.35 ton/ha) was obtained in furrow irrigation and the highest yield (28.91 ton/ha) belonged to tape irrigation (T_D5 treatment). The highest WUE (4.68 kg/m³) belonged to tape irrigation (T_D5 treatment) and the lowest WUE (3.32 kg/m³) belonged to furrow irrigation (F). The difference in WUE between 75% and 100% irrigation water treatments was not significant. The highest WUE (4.49 kg/m³) was achieved in treatment 125%. Also, it is more economical to use irrigation water treatment of 125%, as compared with other irrigation water treatments.

---

Puddling is the most common method of land preparation for lowland rice cultivation. The purpose of this study was to assess the influence of various intensities of puddling on percolation rate, water retention by soil and the amount of water used for different puddling intensities in three dominant soil textures of paddy fields in Guilan province. Undisturbed soil samples were taken from 3 different soils including silty clay, clay loam and loam, with 3 replications. The soil samples were puddled by a laboratory apparatus with different intensities. The results showed that the low puddling intensity treatment caused a 29.3, 32.4 and 36% reduction of percolation rate in silty clay, silty loam and loam textures, respectively. Increasing puddling intensity from low to medium reduced percolation rate significantly, but high intensity was not effective. Soil moisture characteristic curves of all three soils showed that water retention was increased by puddling treatments. Water retention in silty clay was higher than the other two soils. The high intensity treatment needed more water than low intensity for puddling. Increasing puddling intensity from medium intensity to high intensity caused 15.4, 14.1 and 16.3% increase in the amount of water required for puddling in silty clay, silty loam and loam textures, respectively. Generally, in all the three studied soil textures, the amount of water used for high-intensity puddling was more than medium-intensity puddling, while it had no significant effect on water percolation rate and soil water retention.

---

Precise calculation of inlet pressure into sprinkler laterals is an important problem for proper distribution of uniformity. The adjusted average friction correction factor, FaAVG , provides the possibility of calculating the inlet pressure to mutli-outlet pressurized irrigation pipelines when the first outlet spacing from the pipe entrance is arbitrary. To investigate the effect of allowable head-loss in the lateral pipeline on inlet pressure, a new equation was developed for calculating this factor. A progression coefficient was assumed for variable discharge of the outlets. The results showed that though the inlet pressure of the lateral depends on the head loss between the outlets, it is negligible when more than 15 outlets are used. It was also concluded that when N is less than 15 and the ratio of distance between inlet and first outlet to outlet spacing is less than 1, the conventional approaches overestimate the inlet pressure. In this research, a new equation was also developed for Christiansen friction factor in which the first outlet is located at a fraction of outlet spacing. This new factor is dependent on the head loss between the first and last outlets, in addition to the number of outlets and the power of velocity equation. The results of applying this new factor showed good correlation with other researchers’ numerical results when a large number of outlets are coalesced.