Showing 10 results for SHahidi
A.r. Sadeghi Mahounack, F. Shahidi,
Volume 5, Issue 1 (spring 2001)
Abstract
The antifungal effect of sodium diacetate on inhibiting the growth of some bread spoiling molds was examined both in culture media and in flat bread “In situ”. In the first step, the antifungal effect of different concentrations of sodium diacetate: 0, 1000, 2000, 3000, 4000, and 5000 ppm were examined against Aspergillus sp., Aspergillus niger, Rhizopus sp., and Penicillium sp.
The results indicated that as the concentration of sodium diacetate increased, the mold growth decreased. At 5000 ppm the mold growth was inhibited up to fifth day (the last day of experiment). Based on these results, the antifungal effect of different concentrations of sodium diacetate was evaluated in bread “In situ”. In this stage Aspergillus sp. was selected as the indicator mold. The results indicated that if 3000 ppm of sodium diacetate is used, not only mold growth is inhibited but bread staling can also be prevented. This concentration of sodium diacetate does not have any harmful effect on texture and flavour, and can increase bread shelf life up to four days. Higher concentrations of sodium diacetate can inhibit mold growth completely, but have negative effects on texture and flavour. Therefore, 3000 ppm of sodium diacetate is recommended for increasing bread shelf life.
A. H. Elahami Rad, F. Shahidi,
Volume 8, Issue 1 (spring 2004)
Abstract
Bulk tomato paste is produced in concentrations higher than 35% (350 Brix scale) and its packaging is not hermetic. In recent years, the production of this product in our country has considerably increased. One of the most important problems in the tomato paste industry of Iran is the preservation of bulk tomato paste. Shelf-life of tomato paste depends on many factors such as initial quality of tomato paste, cooling conditions, salting, packaging, handling, and cold storage. The product factors evaluated in this study included: 1) microbial parameters such as total count, acid-resistant microorganisms, and Howard Mould Count and 2) physico-chemical parameters such as acidity, pH, amount of lactic acid (D and L forms), and total dry matter.
Experimental data showed that using high brix (35-38) in producing tomato paste along with salting the product surface and storing it at 0 ºC had only a limiting effect on microbial changes and could not prevent their growth completely. However, salting treatment had a great effect on surface growth of fungi and their ability to produce colonies and mycelia. On the basis of the results obtained from this study, cooling of bulk tomato paste in ambient temperature is critical to bulk tomato paste production process and also has an important effect on the quality and shelf-life of the product.
A. Sadeghi, F. Shahidi, S.a. Mortazavi, M. N. Mahalati, S.h.r. Beheshti,
Volume 12, Issue 43 (spring 2008)
Abstract
The aim of this study was to use Alpha-amylase termamyl 2-x for maltodextrin production from corn starch and evaluate its industrial uses. Based on the results obtained in laboratory, this process was accomplished in pilot plant scale. The process included preparation of starch suspension, pH adjustment, addition of enzyme, heating under stirring, continuous control of DE and Brix, enzyme inactivation in adequate DE, separation of soluble sections by centrifuge and finally spray-drying of the maltodextrin liquid. In this investigation, the amount of DE at dry matter was calculated under three enzyme concentrations (0.2, 0.25 and 0.3 ml of Alpha-amylase termamyl 2-x per Kg of starch) and in three different hydrolysis temperatures (60, 65 and 70 ºC) at constant pH (6). A completely randomized design with factorial arrangement and 5 replications was conducted. To study the relationship between DE and different parameters, multiple linear regression was used. Finally, for approximation of DE (based on enzyme concentrations, temperatures and hydrolysis times) a regression model was used. The results from different enzyme dosages at the same temperature and time of hydrolysis differed significantly (p≤ 0.05). Meanwhile, the best enzyme concentration and hydrolysis temperature for maltodextrin (high DE) production after 300 minutes were 0.25 ml of enzyme per kg of starch and 70 ºC, respectively. In these conditions, the least residual starch concentration and residual Alpha-amylase activity were observed.
A Kochaki, A Sadeghi, F Shahidi, A Mortazavi, M Nasiri,
Volume 13, Issue 47 (4-2009)
Abstract
This study was intended to use the sourdough LAB containing specific starter cultures for Barbari bread production and reduction of its staling. For sourdough preparation, fresh microbial cells were collected by centrifugation from LAB cultures. Then 1.5% of flour (w/w) from these washed cells with the same amounts of wheat flour and tap water and 0.25% (w/w) active dry yeast extract, containing Saccharomyces cerevisiae were mixed. The effects of fermentation time (8, 16 and 24 hours), fermentation temperature (28, 32 and 36 ºC) and type of starter culture (Lactobacillus sanfransicencis, Lactobacillus plantarum and a mixture of both LAB) were analyzed in a completely randomized design with factorial experiment with 4 replications. Bread staling was determined by its measuring crumb hardness and specific volume in 1, 24, 48 and 72 hours after baking. Correlation between variables was obtained by multivariate regression, and regression models were exhibited. The results showed that sourdough had significant effect (p≤0.05) on reduction of Barbari bread staling at 1, 24, 48 and 72 hours after baking in comparison with control sample. Moreover, the sample prepared with Lactobacillus plantarum (24 h fermentation time and 32 ºC fermentation temperature) had the maximum specific volume and the least staling, 72 hours after baking.
M Bolandi, F Shahidi, N Sedaghat, R Farhosh, R Ghasemzadeh,
Volume 13, Issue 47 (4-2009)
Abstract
Saffron is one of the most important crops in Iran and the quality of its dried stigma is highly depended on the processing and storage conditions. In this study, the effect of different storage conditions in terms of temperature (20, 30 and 40°C) and water activity (0.32, 0.52 and 0.75) during 12 weeks storage on color strength, aroma and bitterness of saffron were investigated. In order to study of moisture (water activity) different saturated solution of MgCl2, Mg(NO3)2, MgBr2 and NaCl in the various temperatures were used. Results showed the color strength decreased as temperature increased. Increasing of water activity resulted in deterioration of crocin and consequently decreasing of color. Furthermore, after 12 weeks of storage, the color strength had a noticeable decrease, the bitterness also decreased but the aroma increased.
H Baghaee, F Shahidi, M.j Vriadi, M Nasiri Mahalati,
Volume 13, Issue 47 (4-2009)
Abstract
Cantaloupe (Cucumis melo L.) is one of the most important melons in Iran especially in Khorasan province. The cantaloupe seed is a good functional and nutritional source for human, having large amounts of essential amino acids and unsaturated fatty acids. In spite of nutritional and functional aspects, it does not have considerable applications in food industry yet. Cantaloupe seed milk's pH is about 6.8, so cannot be stored for a long time. In this work, pH of cantaloupe seed milk decreases to 4.15 in 3 treatments (citric acid, orange concentrate, and orange sacs) and a constant amount of lemon juice. At first, nutritive value of seed milk was measured. According to results, this milk is a good source of protein (1.52%), phosphorus (41/3 ppm) and potassium (17 ppm). After that, storage stability of cantaloupe seed beverage at refrigerator temperature (4 °C) for 42 days was evaluated by analyzing changes in the chemical, microbial and sensory properties. The results showed that the orange concentrate-cantaloupe seed beverage reached the highest score of total acceptance (3.67 on a 5-point hedonic scale). In these conditions, we couldn’t find any molds and yeasts in the samples, thus the shelf life of the mentioned beverage could be 6 weeks at 4 °C.
N Vahedi, M Mazaheri Tehrani, F Shahidi,
Volume 13, Issue 48 (7-2009)
Abstract
In this study, the effect of “Osmodehydrofrozen” fruit addition on sensory, physical, chemical and microbiological properties of concentrated yoghurt and its quality during storage was evaluated. This research was done in two stages. At the first stage, fruit percentage, type and addition time (before and after fermentation) was determined. The results indicated yoghurts containing 10% apple or 13% strawberry, which was added before fermentation had a better quality. Because of high osmotic activity of apple, the synersis was lower in apple yoghurt in comparison with strawberry yoghurt. According to osmotic activity of both fruits, the synersis value was much lower than that of fruit yoghurts, which contained untreated fruits. Taste value was higher in strawberry yoghurt and texture and mouth feel values were higher at low percentages of fruit. The results of the second stage (quality evaluation during storage) indicated that storage had a significant effect on pH, acidity, synersis, taste and texture (P<0.05). In samples which contained apple, coli forms disappeared after 7 days of storage. In samples that contained strawberry, coli forms disappeared after 7 days of storage.
R. Ramzi, A. Khashei-Siuki, A. Shahidi,
Volume 18, Issue 69 (fall 2014)
Abstract
Limitation of available water resources and crisis of water scarcity has been discussed in water conferences since a long time ago. In Iran’s climatic conditions, the most important problem for increasing agricultural production is limitation of available water resources. Drip irrigation methods are one of the suitable solutions for efficient use of water resources under a condition that selection, design, implementation and operation of drip irrigation systems would perform precisely. In this study, potential and suitability of drip irrigation systems in South Khorasan province was analyzed according to climatic conditions, quality of groundwater resources, topographical status and soil profile areas. To do this, all the effective parameters in drip irrigation are zonated and classified using software Arc GIS 9.3 and then using computational average method in AHP they are turned into a map to find suitable places for drip irrigation in the province. According to the study, about 50 percent of the land in South Khorasan province has the ability to use the drip irrigation system. The remaining 50 percent can also be used for drip systems if improved, with the exception of 9 plains. However, the performed drip irrigation plans are rare in this province and there should be more efforts to inform farmers to develop such systems in this province.
A. Khalili Naft Chali, A. Shahidi, A. Khashei Siuki,
Volume 21, Issue 3 (Fall 2017)
Abstract
In recent years and in many countries, overusing groundwater resources had been higher than their annual feeding amount. This issue caused drop in the groundwater levels, followed by drying wells, qanats and springs. In this study, given the importance of Neyshabur plain in supplying agricultural, industrial and drinkable water of the area, lazy algorithms of KNN, KSTAR and LWL and M5 tree model have been utilized under seven different scenarios in order to estimate groundwater level of this aquifer. To compare the results, the Statistical parameters of root mean square error, correlation coefficient and the average absolute error were analyzed. The results showed that the ‘f’ scenario which contains the volume of water discharged and total precipitation parameters is less efficient because the ground surface level parameter was not taken into account. In ‘a’, ‘b’ and ‘g’ scenarios, an optimum estimation has been maintained for the groundwater level by considering the parameters of total rainfall in the previous month, total rainfall in the last two months and the ground surface level. Among the models of lazy algorithms and M5 decision tree model, the ability of KNN model under ‘a’ scenario was more than other models in December (Azar) by the statistical parameters RZ=0/96 , RMSE= 6.56 and MAE= 3.53. Also, study of evaluation criteria showed that the LWL is not an appropriate model to predict the level of the water table.
Y. Choopan, A. Khashei Siuki, A. Shahidi,
Volume 21, Issue 4 (Winter 2018)
Abstract
Limited water resource in arid and semi-arid areas is one of the most important problems in the agricultural sector. Therefore, the use of non-conventional water resources becomes more important. For this reason, a study was conducted on barley to evaluate the effect of irrigation with sugar plant wastewater as a factorial randomized complete block design field experiment. Treatments include water well I1, wastewater I2, combined water and wastewater I3 (the ratio of seven to one, according to local practice) in two levels of without water stress S1 and %75 water stress S2 and treatment I1S1 was considered as control. The results showed changes in surface tension of %1 had a statistically significant effect on plant height, grain yield and root length. As well changes of irrigation water in the level of %1 had a statistically significant effect on plant height, grain protein yield and root length. Maximum grain yield was obtained in treatment I1S1 with the weight of 4034 kg per hectare and lowest grain yield was obtained in treatment I2S2 with the weight of 1564 kg per hectare. The lowest and highest percentages of protein content were observed in treatment I1S1 for 12.37% and treatment I2S2 for 13.47%, respectively. The plant height showed the highest amount in control treatment, i.e. 82.87 Cm.