JWSS - Journal of Water and Soil Science

Drought represents one of the most critical natural disasters, exerting profound impacts on agriculture, society, the economy, and water resources. Various indices are used to monitor drought and its effects. This study aims to monitor drought in the Zayandeh-Rud Basin using the Standardized Precipitation Index (SPI), the Standardized Precipitation-Evapotranspiration Index (SPEI), the Evaporative Demand Drought Index (EDDI), the Palmer Drought Severity Index (PDSI), and the Reconnaissance Drought Index (RDI). All these indices are based on potential evapotranspiration, incorporating parameters such as precipitation, temperature, relative humidity, wind speed, and sunshine duration. These five indices were calculated and evaluated during the statistical period of 1993–2023 for meteorological stations in Isfahan, East Isfahan, Kabootarabad, Daran, Shahreza, Najafabad, and Mobarakeh. After calculating the indices and using spatial zoning maps, the studied stations were compared in terms of these indices. The continuity of dry and wet periods, as well as the intensity of droughts and wet spells, was analyzed. Subsequently, drought intensities during different years in these stations were ranked using the TOPSIS model based on factors such as precipitation, potential evapotranspiration, and station elevation. The results showed that in stations with a dry climate (such as Isfahan, East Isfahan, and Shahreza), drought occurrences (as indicated by higher rankings) have been consecutive over multiple years. Comparing the performance of the indices in the studied stations using spatial zoning maps revealed that the intensity of droughts and wet spells in regions with dry and semi-dry climates was not very significant. However, in areas with humid climates, the fluctuations in drought and wet spell intensities were quite substantial. The findings indicate that the PDSI and EDDI indices are more suitable for evaluating drought in dry climates.

The river flow prediction is a key aspect of hydrology that plays a significant role in water resources management, flood risk reduction, and agricultural planning. This study simulates the monthly flow of the Razavar River, located in western Iran, using an extreme learning machine (ELM) model enhanced by the Whale (WOA) Optimization Algorithm and Grasshopper Optimization Algorithm (GOA) metaheuristic optimization algorithms. The data used include river flow, precipitation, evaporation, and temperature, which were collected for 10 years with a monthly time step and normalized in the numerical range of zero to one. 80% of the data is used for training, and the remaining 20% for model evaluation. The performance of the models is measured with the statistical indices RMSE, NSE, and R². First, the basic ELM model is developed using the trial-and-error method to adjust the weights between the hidden and output layers. Then, the WOA and GOA algorithms are used to optimize the weights. The results show that the basic ELM model performs worse than the optimized models (Train: RMSE=0.1427, NSE=0.7795, R²=0.7911, Test: RMSE=0.1406, NSE=0.7811, R2=0.7916). While the WOA-ELM and GOA-ELM models provide similar results, the WOA-ELM model shows better performance in complex conditions (Train: RMSE=0.1215, NSE=0.7869, R2=0.7932, Test: RMSE=0.1165, NSE=0.7872, R2=0.7933). The results of this research show that meta-heuristic optimization algorithms play an important role in improving the performance of river flow prediction models due to their ability to search comprehensively and avoid getting stuck in local optima. The findings of this study emphasize the importance of applying these techniques in water resources management and sustainable planning and will pave the way for future research in this area.

The biological desalination system has lower energy consumption and environmental impacts, as well as simpler engineering technology and complexity compared to conventional desalination methods. This study aimed to investigate the effect of nutrients in the Chlorella vulgaris algae culture medium on the rate of algae growth, salinity reduction, TDS, and EC. For this purpose, an amount of algae was inoculated into culture media-containing treatments to achieve a density of 5 × 106 cells/ml. The results showed that the highest amount of dry biomass of algae was in the deep aquifer well water + BG-11 culture medium treatment, with a value of 0.76 ± 0.02 g. The highest amount of chlorophyll a and b was observed on days 4, 17, and 30 in the control treatment, which was significantly different from the other treatments (p < 0.05). The lowest value of light absorption of algae was observed in the control treatment on all days. At the end of the 30-day experimental period, the highest reduction in salinity, TDS, and EC was observed with 27.60, 26.83, and 41.60 percent reduction in the deep aquifer well water + culture medium treatment, respectively, which showed a significant difference (p < 0.05) with the deep aquifer well water treatment. The results showed that deep aquifer well water, due to its nutrient content, has a high potential for algae growth and, as a result, biological desalination and the absence of the use of commercial culture medium, which can reduce desalination costs.

Improvement of soil characteristics is one of the important issues in agricultural and engineering sciences. To investigate the effect of silica nanoparticles on the soil's mechanical and physical properties, a factorial experiment was conducted based on a completely randomized design with three replications. The factors included silica nanoparticles at three levels (0%, 0.5%, and 1% by weight) and two soil types with loam and clay loam textures. The results of the shear strength test showed that the addition of nanosilica increased the internal friction angle and particle adhesion in both loam and clay loam textures, but the liquid limit and plasticity index decreased in both soils. In the consolidation test, the compressibility coefficient in loam decreased from 0.38 to 0.21 and in clay loam from 0.42 to 0.23, while the swelling coefficient in loam decreased from 0.13 to 0.07 and in clay loam from 0.18 to 0.08. Overall, the results showed a significant effect of nanosilica particles on improving soil mechanical strength, especially in clay loam with higher clay content and specific surface area. Therefore, it can be concluded that the use of silica nanoparticles is an effective method for stabilizing problematic soils.
 

Gully erosion is one of the most important types of water erosion. Since the amount of soil loss due to this erosion is directly related to environmental factors, the amount of soil loss due to each gully can be modeled based on environmental conditions. According to the high ability of machine learning models based on artificial intelligence to analyze environmental information, in addition to determining soil loss due to gully erosion, modeling has been carried out using two random forest models, and artificial neural networks and evaluating their efficiency in the Mahurmilati watershed located in the southwest of Fars province in this study. The dimensional parameters of 70 gullies were measured over four years (2021-2024), and the volume and weight of soil lost were calculated. 15 environmental factors were selected as predictive variables, and modeling was performed with a cross-validation approach using these two models, and the accuracy of the models was evaluated using quantitative criteria. The amount of soil loss in gullies during the study period was 15300.94 tons. The accuracy evaluation of the models showed that the random forest model had better performance based on the coefficient of determination (R2=0.66-0.73). Also, this model had the lowest value in terms of the RSR error index evaluation criterion (RSR=0.66-1.03) and the highest accuracy. In terms of the fit evaluation index (D), the random forest model also had the highest fit between the observational and forecast data and had the highest value of this index (D=0.83), and therefore, it was introduced as the superior model for predicting soil loss due to gully erosion in this watershed.

The present study was conducted with the aim of quantitative and qualitative analysis of agricultural water consumption in Markazi Province, and calculated and examined water consumption at the level of 18 crops and 12 counties using the water footprint as a comprehensive indicator. A simultaneous study of the three components of the blue, green, and gray water footprint was conducted as an analytical tool to assess the amount and manner of water consumption. In this study, meteorological, agricultural, and input consumption data were used in the 2022-2023 crop year, and water footprint values were estimated in terms of units and totals by crop and county. The results showed that BWFU is strongly influenced by spatial factors (climate and precipitation) and plant characteristics (yield, crop type, and growth period). A difference of up to 98% in BWFU among different crops and a difference of more than 9 times in GWFU in rainfed compared to irrigated lands were observed. Also, GRWFU values exceeded BWFU for many crops, indicating a significant pollutant load from the use of chemical fertilizers. In addition to spatial factors and plant characteristics, the difference of 223 MCM between Saveh and Ashtian counties and the difference of 52.7 MCM between Shazand and Mahallat counties in BWF and GWF, respectively, indicate spatial differences in BWFU and cultivation area. Also, the difference in 1377 MCM between the GRWF of Arak and Ashtian counties is affected by the amount and type of fertilizer used, in addition to the cultivation area. In addition to improving performance, suggested management measures include reducing the cultivation area of high-consumption crops, expanding rainfed lands in high-rainfall areas, optimizing input consumption, and modifying the cultivation pattern in accordance with resources and climatic conditions in order to maintain the quantity and quality of water resources. Accordingly, the research results demonstrate the potential of the water footprint index in location-based and product-based analysis of water consumption and formulation of management responses.

One of the key factors in agricultural production is the availability of sufficient and usable nutrients for plant growth, and among these, nitrogen plays a particularly important role. The waste of nitrogen fertilizers due to the low efficiency of using fertilizers has caused environmental problems such as pollution of surface and groundwater by nitrate or ammonium. In this study, the influence of fertigation as a combination of urea, ammonium nitrate, natural zeolite of Semnan (CP), and modified zeolite by surfactant (SMZ) in the reduction of waste and manure fertilizer was evaluated. Two separate experiments with a completely randomized design with three replications were used for loam soil columns. Treatments consisted of four levels of zeolite application (0, 4, 8, and 16 g/Kg) and a fertilization level with a concentration of 60 mg per liter nitrate applied at three fertigations during six irrigations. In the first part of the study, the role of nitrogen fertilizers in fertigation as a combination of urea and ammonium nitrate (UAN) for ordinary soil was examined to reduce the concentration of nitrate and ammonium in the drainage water, and the results were compared with one of the fertigation applications. The results showed that the loss of fertilizer in the form of nitrate was reduced by 40 percent for the UAN treatment during the first period of fertigation. Since the results of the first part of the experiment showed that the concentration of ammonium nitrate does not reduce to the same level as drinking water, in the second part of the experiment, the soil amendments were used. The measured nitrate removal showed that the highest nitrate removal belonged to the soil mixed with 16 g/kg of modified zeolite in the surface layer of soil (SM16) treatment, and it was equivalent to 90 percent. The highest ammonium removal belonged to the soil mixed with 16 g/kg of natural zeolite in the surface layer of soil (CP16) treatment, and it was 85 percent. Therefore, the use of fertigation as a combination of nitrogen fertilizers with soil amendments for conditions where there is a potential for groundwater pollution by nitrate leaching is recommended.

Biochar, a stable, economical, and environmentally friendly carbonaceous material, has garnered significant attention in the development of advanced adsorbents for the immobilization and removal of environmental pollutants from water and soil. This interest stems from its oxygen-containing functional groups, aromatic structure, notable porosity, high specific surface area, and suitable cation exchange capacity. However, the performance limitations of pristine biochar in pollutant removal underscore the necessity for its modification and engineering. In this regard, the production of biochar composites through the combination with minerals and iron-containing compounds has emerged as an effective strategy to enhance structural and chemical properties, as well as surface reactivity. This review paper examines the primary methods for synthesizing biochar composites, including post-pyrolysis modification and direct mixing with mineral phases. Synergistic and direct loading methods are introduced as novel approaches. Furthermore, the influence of biomass type, pyrolysis conditions, modifier type, and synthesis pathway on the final physicochemical characteristics of the composites is analyzed. Additionally, the governing mechanisms underlying the performance of these materials in immobilizing and removing heavy metals are discussed, encompassing adsorption, precipitation, complexation, ligand exchange, redox reactions, electron transfer, electrostatic interactions, and ion exchange. Study results indicate that the synergy between biochar and mineral/iron-bearing phases can significantly enhance the efficiency of immobilizing pollutants, including both anionic and cationic heavy metals. This review emphasizes the importance of targeted design of biochar composites based on a precise understanding of the relationship between synthesis methods and functional properties. Future challenges and prospects concerning the application of biochar-mineral composites in environmental remediation and the promising commercialization of this technology are also addressed.

Scour is a major challenge in river engineering, as it causes bridge failures during flood events and leads to significant economic losses. This study aims to estimate the normalized scour depth (Dse/Dp) around pile groups by examining relevant hydrodynamic and geometric parameters. A dataset comprising 299 laboratory measurements collected from various sources was assembled and divided into training and testing subsets. As machine learning inputs, several models were employed, including Artificial Neural Networks (ANN), Support Vector Regression (SVR), Extreme Gradient Boosting (XGBoost), and a meta-ensemble learning model (Stacking). Hyperparameter tuning was performed using the Grid search method to achieve optimal regression performance. Model performance evaluation indicated that the ANN and SVR models achieved coefficients of determination of R² = 0.87 and R² = 0.91, respectively. The XGBoost model outperformed these approaches, yielding R² = 0.94 with an RMSE of approximately 0.28. Ultimately, the stacking ensemble model, by integrating the outputs of the base learners, demonstrated the highest predictive accuracy with R² = 0.96 and an RMSE of 0.11, representing an improvement of approximately 15% compared to ANN and 7% compared to XGBoost. Overall, the findings highlight that ensemble machine learning models—particularly the Stacking approach—provide a robust and efficient framework for predicting scour depth around pile groups and for capturing the complex flow behaviors in hydraulic systems.

This study evaluated the impact of four fertilization systems—no fertilizer, urea-based chemical fertilizer, cow manure, and combined urea and cow manure—on nitrogen mineralization and dry matter yield in sorghum cultivated on sandy loam soil with low fertility. Nitrogen mineralization potential (N₀) was assessed using a first-order kinetic model across various fertilizer treatments. Results indicated that urea-based treatments exhibited superior nitrogen mineralization potential compared to cow manure and combined treatments, with N₀ values ranging from 13.46 to 17.89 mg N/kg soil. Combined fertilization (urea + cow manure) consistently produced higher N₀k values, suggesting enhanced nitrogen availability and mineralization rates. Correspondence between nitrogen mineralization peaks and critical sorghum growth stages was observed, particularly during vegetative and reproductive phases. The highest dry matter yield was achieved with 240 kg N/ha from combined fertilizer, although 160 kg N/ha from the same source yielded comparably. These findings highlight the synergistic benefits of integrating organic and inorganic fertilizers to optimize nitrogen dynamics and crop productivity in low-fertility soils.
 

Nickel (Ni) is an essential element for living organisms and plays important biological roles in plants; however, its accumulation at high concentrations can cause toxicity and adverse effects. This study aimed to evaluate nickel accumulation using the leaves of Albizia lebbeck, Prosopis cineraria, and Eucalyptus globulus as biological indicators in Ahvaz City during the summer of 2025. A total of 126 leaf samples and 63 soil samples were collected from seven stations across Ahvaz City. Chemical digestion of the leaf and soil samples was performed using the Johnson and EPA 3050 methods, respectively. Nickel concentrations were determined using atomic absorption spectrometry. Significant differences were observed in Ni concentrations among the leaves of Albizia lebbeck, Prosopis cineraria, and Eucalyptus globulus (P < 0.05), whereas no significant difference was observed in Ni concentrations among the soil samples (P > 0.05). The highest and lowest Ni concentrations in the unwashed and washed leaves of Albizia lebbeck were 36.2 and 10.3 mg kg⁻¹, respectively. The highest and lowest Ni concentrations in the soil samples collected from the tree rhizospheres were 57.36 and 44.1 mg kg⁻¹, respectively. The highest Ni transfer factor was observed in Albizia lebbeck leaves (0.446), whereas the lowest was observed in Eucalyptus globulus leaves (0.203). The Ni transfer factors for the leaves of Albizia lebbeck, Prosopis cineraria, and Eucalyptus globulus, together with the linear regression analysis of Ni concentrations in washed and unwashed leaves, indicate that atmospheric deposition may be an important source of Ni accumulation in the leaves. In contrast, the contribution of soil-derived Ni to leaf accumulation appears to be relatively low.

This research was conducted with the aim of site selection and land capability evaluation for the development of pistachio cultivation in Sistan and Baluchestan province by integrating Geographic Information Systems (GIS), the Analytical Hierarchy Process (AHP), and remote sensing data (Landsat 8 satellite imagery within the Google Earth Engine platform). Eight criteria, including distance from water canals, roads, and population centers, land use, slope, elevation, slope aspect, and soil characteristics (salinity, texture, and pH), were weighted based on the opinions of 15 experts (inconsistency ratio = 0.03). The highest weights were assigned to distance from water canals (0.32), soil characteristics (0.25), and distance from roads (0.14). Information layers with a spatial resolution of 30 m were prepared in the GIS environment and integrated using the weighted overlay method. The final map showed that 13.8 percent of the province is in the highly suitable class, 23.0 percent in the moderately suitable class, 33.5 percent in the marginally suitable class, 27.5 percent in the unsuitable class, and 2.2 percent has absolute limitations. The findings indicated that 36.8 percent of the province has significant potential for the development of pistachio cultivation; however, the main limitation is access to water resources. 65.5 percent of the province is located in the unsuitable category in terms of distance from water canals. Therefore, the sustainable development of pistachio cultivation in the province requires precise planning with a focus on suitable areas and the sustainable management of water resources. The novelty of this research lies in applying Boolean masks to eliminate ecological errors and using cloud computing (GEE) for the temporal consistency of data. Furthermore, comparative analysis revealed that crop development in some areas (such as Zahedan) relies more on groundwater extraction than on inherent land potential; the model classifies these areas as "unsuitable," providing a preventive warning regarding long-term sustainability