JWSS - Journal of Water and Soil Science

---

In order to describe soils polluted with hydrocarbons, the amount and distribution pattern of soil heavy metals (Ni, Cd) in soils were studied. Soil samples were taken from one of the western oil field of Iran. The field was naturally exposed to crude oil spillage into soil and consequently was environmentally polluted during the development, production, transportation and storage of crude oil. Sampling was started near the oil wells with maximum relative contamination and continued to the remote places based on grid sampling pattern. Samples were characterized by physicochemical analysis. The results revealed different levels of total hydrocarbons (from 0.12 to 2.99 mg/kg of dry soil), Ni (from 32 to 136 mg/kg. of dry soil) and Cd (from 0 to 4mg/kg of dry soil). In addition, the role of soil agents such as pH and EC and sedimentary indexes was considerable in controlling the pollution trend in the studied area. Finally, by interpolation module and prediction of unknown values via Kriging techniques, the expansion plans were created. The extracted plans obviously illustrated the decrease in the levels of pollution indexes with the increase in distance from the given centers of pollution

---

The type and intensity of soil erosion in a region generally depend on climatic conditions, ups and downs, soil and land use. Of these, land use is most important. Using different systems of ploughing after unconscious and non-scientific change of land use affects soil physicochemical characteristics. This fact especially in marginal lands and mountainous regions is more visible. In order to investigate sensitivity to soil loss and erosion in various land uses of Aghajary deposits, part of Margha catchment with an area of 1609 hectares in Izeh city was selected. This was to determine the relationship between soil loss by rain simulator and some soil physicochemical characteristics like percentage of very fine sand, sand, clay, silt, pH, Ec, moisture, Calcium Carbonate and organic materials in different land uses. Then, sediment sampling in 7 points, three replicates and in various intensities of 0.75, 1 and 1.25 millimeters in minute in range, residential and agricultural land uses was done using rain simulator. In order to investigate effective factors in sediment production and erosion, samples of soil layers (in depth range of 0-20 cm meters) equal to the number of sediments were taken. For statistical analysis, EXCEL and SPSS 11.5 software were used. In total, the amount of runoff in residential land use was highest and in agriculture land use was lowest. The amount of sediment in agriculture land use was highest and in residential land use was lowest. Then, the most important factors in sediment yield were diagnosed by multi regression. The results showed that sediment yield and erodibility in land uses have meaningful differences in various intensities of precipitation. Regression models showed that in the production of sediment in various land uses, from among the measured factors, silt, sand very fine, lime, Ec, organic materials and pH had the greatest role. Sand percentage in the residential land use, and very fine sand and organic matter in agriculture land use had the most important role in sediment production. But in range land use, moisture percentage and pH had the biggest role in sediment production.

---

The incorporation of plant residues in soils of arid and semiarid regions is a major principle of sustainable agriculture. This study was conducted at the research farm of Urmia University (37° 32’N and 45° 5’ E), Urmia, Iran during the 2009 and 2010 growing seasons. Five green manure crops were grown in four replications arranged in a randomized complete block design. The treatments included white clover (T.repens), sainfoin (Onobrychis viciaefolia), pearl millet (Panicum miliaceum), sorghum (Sorghum bicolor) and turnip (Eruca sativa). Changes in soil nutrient elements and nitrogen mineralization were measured during different time periods after plant residues incorporation to soil. The plants were irrigated 50% of field capacity during growing period. The results showed that the total nitrogen and NH4-N were influenced by type of green manure in both years. The lignin and cellulose were the main factors controlling N mineralization and residue decomposition. In the first and second year, the results indicated that pearl millet green residues resulted in the highest amount of soil organic carbon. Nitrate-N content reached the highest amount in sainfoin and white clover. In conclusion, white clover and sainfoin due to increasing total and mineral nitrogen for subsequent plants could be introduced as a proper green manure in water deficit conditions.

---

Soil erosion is one of the most important factors affecting soil quantity and quality and is environmental problems in developing countries like Iran. It can have deteriorating effects on ecosystems. This research was carried out in farm lands of the Chehel-Chai watershed, Golestan province to investigate the effect of soil properties on runoff and soil loss. Runoff and soil loss were measured in a completely randomized design in 36 plots with 10×10 m sizes in farm lands. For this reason, this study was conducted using rainfall simulator with 2 mm/min intensity and 15 min duration in 4 replicates. Soil samples were also taken in each plot. Sampling was conducted in October 2009. Results of the Pearson correlation showed that among soil properties, the contents of the lime, silt and fine sand had positive correlations with runoff at 1% confidence level. Also, soil surface resistance at 1% confidence level, the contents of the organic matter and nitrogen at 5% confidence level had negative correlations with soil loss. Finally, the results of multiple linear models showed that the content of lime is effective in estimating runoff and soil surface resistance, and organic matter is effective in estimating soil loss.

---

Study of land use effects on soil quality indicators leads to sustainable management and preventing progressive land degradation. The TM (1987) and ETM+ (2000 and 2005) data were used to study land use change effects in Mahan-Joopar area on soil quality indicators. Fifty random soil samples from 0-30 cm depth of each land use were taken using provided maps. Organic matter, microbial respiration potential, bulk density, pH, EC, and soil texture were investigated as soil quality indicators. Eight land uses including fruit orchards, woodlands, pistachio orchards, cultivated, barren, bare land, fallowed, and haloxylone land were detected. Results showed overall accuracies of 89.4, 95.2, and 91.7 % with kappa coefficients of 85, 92, and 88% for maps provided in 1987, 2000, and 2005, respectively. Generally, the investigated quality indicators showed that woodlands, fruit orchards, cultivated land, and pistachio orchards enhanced soil quality better than other land uses.

---

In order to determine optimum equilibrium solution phosphorus (P) concentration using P adsorption isotherm and obtain model(s) by integrating soil solution P concentration, physicochemical properties, and soil P test (available P) which predict standard P requirements to achieve maximum yield, laboratory and glasshouse experiments were conducted on 36 soil samples belonging to 15 soil series and 14 soil samples, respectively. Using wheat as a test crop, the glasshouse experiment was laid out with five P levels in a completely randomized design with three replications. Concentrations of P in solution established by adding P in the pots estimated from the sorption curve ranged from 0.2 to 1.2 mg P/L including check treatment (no P). The results showed that equilibrium solution P concentration (EPC) was almost low in comparison with the requirement for most crops (<0.2 mg/L). The amount of P adsorbed by the soils at 0.2 mg/L EPC ranged from 5 to 114 mg/kg soil. The phosphate adsorption was well described by Freundlich (R2 = 0.96) and Langmuir (R2 = 0.88) isotherms. Langmuir maximum adsorption (Xm) and Freundlich coefficient (aF) estimated from Langmuir and Freundlich equations ranged from 127 to 238 mg P /kg soil and from 43 to 211 mg P/kg, respectively. Yield of wheat in all soils approached maximum as adjusted P levels were increased to 0.4 mg P/L. The results showed that some soils studied were adequate in available P by the NaHCO3 test, but required an amount of P fertilizer by the isotherm P requirement test to obtain maximum biomass production. Soil clay content was significantly related to the soil P sorption indices, P0.4 (P sorbed at 0.4 mg P/L EPC) (R = 0.40, P<0.01), PBC (P buffering capacity) (R = 0.54, P<0.001), aF (R = 0.48, P<0.01), and Xm (R = 0.40, P<0.01). Total CaCO3 and Active CaCO3 were found to be less important factors affecting P adsorption. Using stepwise regression analysis resulted in a useful regression model including the combination of Olsen P and clay content for the prediction of standard P requirement (P0.4).

---

Different root water uptake models have recently been used. In this article, we use evapotranspiration data and soil water content data obtained from lysimeter measurements and root distribution in soil data obtained from olive tree to evaluate the accuracy of root water uptake models in predicting the soil water content profiles. Depth of lysimeter was 120 cm which was filled with clay-loam. Lysimeter recorded values of input and output of water and accurate value of evapotranspiration was also calculated. Soil water content distribution was measured using a TDR probe in lysimeter during the experiment. Feddes model with the root length density was used to account for the role of root distribution in soil. The flow equations were solved numerically with the measured evapotranspiration data as input, and the predicted soil water content profiles were compared with the measured profiles to evaluate the validity of the root water uptake models. The comparison showed that the average of relative error index for Feddes model was 10 %. Based on the results, about 90% of root uptake in olive tree happened at the depth of 40 centimeter

---

Soil erodibility and gully erosion and their expansion occur under geological formation and soil characteristics. This study aims to find the rate of soil and formation effects on gully erosion in Seifabad watershed. To that end, aerial and field work were used together to determine the rate & expansion of 17 gullies in 12 years' period from 1997 to 2009. The soils were sampled for each gully in 50% interval distance with 0-30 cm horizontal surfaces and >30 cm depth. Some factors were estimated from the soil such as EC, PH, Silt, Clay, Sand & limeston percentages. Statistical analysis was done using SPSS 14 through non-parametric tests such as Kruskal-Wallis & Mann-Whitney. Spearman coefficient was used to investigate the relation between volume of gully & litological factors. The results showed a positive correlation at 1% level for the PH with the gully erodibility in surface soil, but for the depth of soil this relation belonged to the silt percentage, and sand showed a negative relation at 5%level with the volume of the gully sediments. Finally, there was no statistical relationship between geological formation and the sediment yield in gullies.

---

The quantity and variability of soil organic carbon (SOC) is one of the most important indices to determine the effect of land use changes on the soil quality. Regarding long-term changes from rangeland to dry farming in the Roin area of North Khorasan, the objectives of this study were to investigate the effect of long-term land use changes on the SOC in different slope faces and use SOC as an index to make a proper decision about the future of land use in this area. 140 soil samples were taken from 0-15 cm soil depth of back slope position of north-, south-, west- and east-facing slopes of rangeland, dry farming, alfalfa dry farming and garden in 7 points. 14 soil samples were taken from irrigated farming, too. The results showed that garden and irrigation farming with averages of 2.03 and 0.78% have the maximum and minimum SOC content. The average of SOC content in rangeland was 1.40% that decreased by land use change to 1.04 and 1.27% in dry farming and alfalfa dry farming, respectively. SOC content in southern slope aspects showed a significant difference compared to other slope aspects. The most SOC content occurred in east aspects. It seems that after long-term land use changes, the SOC content have equilibrated to environmental and land use conditions. The average SOC content in different slope aspects except south one changed from 1.4% in rangeland to 1.11% in dry farming and 1.32% in alfalfa dry farming, which are a suitable value for semiarid regions. In conclusion, to protect land from degradation and considering this fact that dry farming is the main income of the people in the study area, it is recommended to stop dry farming on south aspects and continue on east, north and west aspects with conservation practices.

---

Paddy soils provide the staple diet for nearly half of the world's population. The formation of the Anthrosols is induced by tilling the wet soil (puddling), flooding and drainage regimes associated with the development of a plow pan and specific redoximorphic features. The aim of this study was to evaluate the effects of long-term rice cultivation on physico-chemical properties and clay mineralogy of soils of three rice farms and compare the results with adjacent virgin lands in Yasouj region. Paddy soils exhibited larger contents of clay, organic carbon, saturation percentage, cation exchangeable capacity, cation exchange activity classes, electrical conductivity and lower content of calcium carbonate equivalent compared to non-paddy soils. This land use showed higher proportions of Feo, Fet and lower content of Fed. No such differences were noticed with the type of clay minerals in both land uses. Paddy soils contained greater amount of smectite, particularly in the surface horizons. Smectite in paddy soils exhibited lower layer charge and higher degree of crystallinity compared to non-paddy soils. Transformation of illite and chlorite to expandable minerals is a possible mechanism for lower amounts of these minerals in paddy soils.

---

The objective of this study was to evaluate the effects of crop residues management on soil physical and biological properties. The impacts of residue management on yield of forage corn and barley and soil micro-organisms population were also studied. The results showed that application of crop residues increased soil organic matter (22.2 %), saturated hydraulic conductivity (51.9 %), porosity (3.7 %), mean weight diameter (MWD) of the aggregates (5.4 %), and field capacity (5.8 %) and decreased bulk density (3.7 %) Whereas crop residues burring decreased soil organic matter (31.8 %), saturated hydraulic conductivity (36.6 %), porosity (0.5 %), mean weight diameter (MWD) of the aggregates (5.1 %), and field capacity (4.1 %) and increased soil bulk density (1 %). Soil water characteristic curves showed that the observed differences in soil water retention of application and burning residues treatments were higher at low matric suctions than those at high water matric suction. The results demonstrated that micro-organisms population significantly (P<0.05) decreased in residues burning treatment compared with the residues application treatment. Therefore, based on the results of this study residues' burning is not recommended in Ardabil.

---

In order to study the precision of qualitative land suitability classification method for main irrigated crops (i.e. potato, sugar beet, wheat and alfalfa) in the Shahrekord plain, qualitative land suitability maps were obtained for all the studied crops according to representative pedon analysis using simple limitation method. In the next step, a regular grid sampling consisting of 100 sample points with a distance of 375 m was designed. Then all required analyses were done to recognize the suitability class of these sites for each land use. Finally, land suitability results for all the observation points in each map unit were compared with the results of its representative pedon. The results showed the average of measured compatibility between representative pedon and other observation points in each map unit in class and subclass levels was about 60 % and 38 %, respectively. Due to the generalization of representative pedon analyses to all unit area, the use of soil map units as land suitability units may lead to unsatisfactory results. Therefore, the use of representative pedon is not recommended in sustainable land management and precision agriculture. However, new techniques like geostatistics can be used to improve the conventional soil mapping methods.

---

The reclamation of salt-affected soils which occur on 831×106 ha can be effective in increasing agricultural production. Cultivation of plant species which are resistant to salinity can improve the soil by increasing the solubility of calcite and releasing the calcium in soil solution. This study was conducted as a column experiment with a saline-sodic soil (SAR = 23.8, EC= 12.88 dS m-1, pH= 7.7, CaCO3= 15.15 %). Three plant treatments including Sesbania acuelata, Cyanodon dactylon and Rubia tinctorum, and three chemical treatments including gypsum in two levels (50% and 100% gypsum requirement) and sulfuric acid with a control were arranged. All treatments were replicated 3 times. The soil columns were similarly leached by 41 liters of tap water during 30 days in 8 stages. After leaching, SAR and EC in soil, the amounts of sodium in leachate and total amount of sodium in plants shoot were determined. Results showed that the SAR was decreased compared to control by the plant treatments and the chemical amendments by about 59% and 65%, respectively. Moreover, two plants of Cyanodon dactylon and Rubia tinctorum had maximum amount of leachate sodium, which shows an impressive role of these plants in dissolution and leaching of exchangeable or sediment sodium in comparison with the other treatments. According to salient performance of phytoremediation in improvement of physicochemical properties of soil compared to chemical amendments, phytoremediation can be recommended as a profitable low-cost and effective method for remediation of saline-sodic soils.

---

In this study, a completely randomized experiment was designed with five irrigation treatments and three replicates. The irrigation programs were raw wastewater (T1), treated wastewater (T2), a combination of 50% raw wastewater and 50% fresh water (T3), a combination of 50% treated wastewater and 50% fresh water (T4), and fresh water (T5). The experiments were run within a greenhouse. The lysimeters were built up in September 2009 and they were filled with a two layer soil. The upper (30 cm) and lower (40 cm) layers were sandy loam and sandy clay loam, respectively. The results showed that the effects of watering treatments on transfer coefficients of heavy metals from soil to shoots (except Cd) and tubers of potato (except Zn and Cu) were significant (p <0.01). Maximum and minimum transfer coefficients of heavy metals were observed in the (T1) and (T5) treatments, respectively. Also, the transfer coefficients of Cd from soil to shoots were lower than tubers. In the case of Zn, Cu and Pb, transfer coefficients from soil to tubers were lower than shoots. In this study, the maximum transfer coefficients to shoots were Cd (0.331-0.463), Zn (0.383-0.230), Cu (0.173-0.386) and Pb (0.003-0.057), respectively. Maximum transfer coefficients toward tubers (except T5) were Cd (0.439-0.572), Cu (0.081-0.138), Zn (0.170-0.217) and Pb (0-0.017), respectively. The combination of wastewater and fresh water use in short-term irrigation might be feasible, but a heavy metal monitoring program is necessary.

---

In order to assess hydraulics of LNAPLs in soil, the soil retention curves of petroleum and water were both determined through hanging column method. And, the hydraulic conductivity of petroleum and water were determined by steady head method. The water and petroleum hydraulic conductivities were 7.27 and 57.84 cm.day-1, respectively. The soil retention parameters were obtained based on van Genuchten, Brooks-Corey and Campbell models. In addition, the soil hydraulic conductivity for both fluids was predicted based on Mualem- Brooks-Corey, Burdine- Brooks-Corey, Mualem-van Genuchten and Campbell models. The accuracy assessment of models was performed by ME, RMSE, CD, EF and CRM. The results indicated that the magnitudes of the pore-size distribution parameters and the bubbling pressure parameters were reduced in NAPL-air system compared to water-air system. Due to unusual hydraulic behavior of petroleum and soil-petroleum interactions leading to remaining substantial petroleum content in porous media, more matric potential is needed to drain out petroleum from soils compared to water. Thus, soil provides more retention for petroleum at a given quantity of fluid. Owing to high amount of petroleum kinematic viscosity, the saturated soil hydraulic conductivity of petroleum was lower than that of water. However, soil hydraulic conductivity for petroleum was larger than water at more than 100 cm matric head.

---

Water management in cracked paddy soils is an important issue in rice cultivation. In order to study organic matter and zeolite effect and their interaction on moisture conditions and hydraulic and physical properties of paddy soils, the organic matter (rice straw) at four levels (0, 8, 16 and 24 tons per hectare), zeolite at four levels (0, 0.5, 1 and 1.5 percent ), and also moisture stages of soil at 5 levels were selected. This experiment was conducted in Rice Research Institute of Iran. Randomized Complete Block Design (RCBD) was used to study the effect of treatments on different subjects. The amount of moisture, bulk density and the distance of soil from the wall of container were measured in a 4-month period. The obtained results showed that the interaction effects of organic matter and zeolite on soil moisture content were statistically significant at one percentage level. Addition of plant residues caused an increase in soil moisture weight and reduction in bulk density compared to the control treatment. It was also found that soil moisture content and bulk density were highly correlated. Bulk density of control treatment ranged from 0.75 to1.7 gr/cm3, while with addition of 1.5 % crop residue the bulk density ranged from 0.7 to 1.3gr/cm3. Overall results show that crop residues are effective in reduction of crack parameters of soil , but zeolite cannot be effective although it causes more maintenance of soil moisture.

---

efficiency was investigated during a 2-year period (2009-2010) in a silty clay loam soil in Tajarak Research Station (Kaboudarahang Township), Hamedan. The experimental design was a strip-plot within a randomized complete blocks design. The horizontal band, the irrigation water rate after flowering, included full and deficit irrigation (100% and 75% potato water requirement) and the vertical band, kind of inter-planting row tillage including 1- subsoiling to 30-35 cm soil depth, 2- chiseling to 20-25 cm soil depth, 3- sweeping to 5 cm soil depth and 4- no-till. During the growing season, soil mechanical resistance (cone index) in two stages and water infiltration into the soil were measured. At the end of the growth season (harvesting time), potato yield quantity and quality were measured. Result showed that the effect of inter-row tillage on soil mechanical resistance was significant. Subsoiling and chiseling had lower soil mechanical resistance and higher water permeability between treatments, respectively. The effect of inter-row tillage on potato yield was significant so subsoiling and chiseling had a higher potato yield between treatments, respectively. The effect of irrigation water rate on potato yield was not significant. The effect of inter-row tillage on water use efficiency wasn’t significant.

---

Cation exchange capacity (CEC) is one of the important indices in soil fertility. Direct measurement of CEC is time consuming and expensive, especially in aridisols containing high amounts of carbonates and gypsum. Alternatively, CEC could be indirectly predicted through pedotransfer functions (PTF). The objective of this study was to predict CEC using class and continuous PTFs.A data set (n = 977) was classified according to the soil textural class and was used to derive the PTFs. Another independent set (n = 173) was used to test the reliability of the PTFs. The root mean of square error (RMSE), mean error (ME) and index of agreement (d) were applied to evaluate the PTFs. Within every textural class, we furthermore evaluated the relative improvement (RI) of the continuous PTFs over the corresponding class PTF. The continuous PTFs were more accurate than class PTFs for finer textural classes while the former showed higher reliability in coarser textural classes. With an increase in relative particle size, prediction bias of class PTFs decreased RMSE was 8.55 and 3.88 in clay and sandy loam textural classes, respectively. Consequently, according to the results obtained in this study, for the prediction of soil CEC, continuous PTFs are suggested to be used for silty loam and finer textural classes while for loam and coarser classes application of class PTFs is preferred.

---

Extensive tillage leads to the degradation of soil structure and aggregate stability. The effects of three different tillage implements including (combination tillage, chisel packer and disk), three levels of soil water content including (0.5, 0.7 and 0.9 plastic limit), three working speeds including (6, 8 and 10 km/hr) and two soil textures including (loam and silty clay loam soils) were studied. The study was carried out in Khuzestan Ramin Agriculture and Natural Resources University, in 2011. Soil aggregate mean weight diameter (MWD), geometric mean diameter (GMD) as determined by wet sieving method and soil surface roughness (SSR) were measured. Results showed that chisel packer with 0.744 mm MWD produced largest soil aggregates in both soils because of using narrow blade and shanks and small rake angles compared to other tillage treatments. Soil aggregate size was shown larger than other tillage treatments where chisel packer was employed but it was not suitable because of deep furrow shapes. Combination tillage was able to make a better soil condition to be used for seeding where the experiment was conducted.

---

Change in land use and tillage practices has great influence on soil physical and chemical properties. The present study has focused on the effects of converting undisturbed soil to agricultural lands. Chemical and physical soil properties, infiltration, cation exchange capacity (CEC), electrical conductivity, pH, bulk density, porosity, sodium, potassium, total Ca + Mg, organic matter percentage, sodium adsorption ratio (SAR) and lime percentage were measured using standard frequently used methods. Fifty soil samples from agriculture land and other 50 soil samples from undisturbed land were collected from 0 – 30 cm depth and different statistical analysis were performed. Agriculture land is Cultivated for more than 20 years. The results showed that change in land use from undisturbed to disturbed soil did not significantly changed soil organic matter content. Also, soil electrical conductivity showed a huge increase whereas pH showed non-significant changes due to land use change. Unlike pH, SAR, organic matter percentage and lime percentage, some other soil parameters showed significant decrease in quality through land use change. Correlation coefficients of the effective factors were calculated to explain the main reason for lowering soil quality. The results showed that sodium in EC bulk density in porosity and CEC sodium and Ca+Mg in SAR EC in soil infiltration and Ca+Mg in organic matter showed the most correlation.