Showing 57 results for Corn
M Gorji, H Eshghizadeh, A Khosh Goftarmanesh, A Ashrafi, A Moalem, N Poursakhi, N Pourghasemian, A Miladi,
Volume 12, Issue 46 (1-2009)
Abstract
Iron deficiency is a worldwide nutritional constraint in agricultural lands especially in calcareous soils. Cultivation of crops tolerant to Fe-deficiency is an approach to combat Fe deficiency. The aim of this investigation was to evaluate Fe-efficiency of selected important crops in Iran. A completely randomized block design in triplicates was conducted at IUT research greenhouse in fall 2006. Sweet corn (Hybrid K.S.C. 404), grain corn (Hybrid S.C. 500), safflower (cvs. S3110, S-411), sunflower (Hybrid Hyson) and durum wheat (cv. Shuga) were grown in a nutrient solution at two Fe levels (1 and 10 µM Fe-EDTA). The results showed significant (P < 0.01) variation among the studied crops in Fe-efficiency. Corn hybrids were more sensitive to Fe deficiency (FeE = 26%) as compared to other studied crops, and the greatest reduction was observed in their shoot dry matter at 0.1 mM Fe- EDTA treatment. In contrast, the lowest decrease in root and shoot dry matter weight under Fe-deficient condition was found for durum wheat (FeE=94%). Comparing the calculated Fe-efficiency using different indices showed that Fe concentration and content in the whole plant, shoot and root had no relationship with crop tolerance to Fe deficiency.
H Shariatmadari, Y Rezainejad, A Abdi, A Mahmoudabadi, M Karami,
Volume 12, Issue 46 (1-2009)
Abstract
Many researchers have reported positive effects of converter sludge and slag, two by-products in Isfahan iron melting factory. In this work, the optimum rate of application and the availability of some essential elements (for plant growth) in the converter sludge and slag for corn were investigated. The converter sludge contains about 64% Fe ІІ and ІІІ oxides and some other essential elements for plant growth. The slag also contains 17% iron oxides, 52.8% calcium oxide as well as considerable amounts of some other elements. Treatments included a control, Fe-EDTA foliar spray with 5 in 1000 concentration, application of sludge in 4 levels (L1, L2, L3 and L4 equal to 5.83, 13.33, 20.83 and 26.67 ton/ha, respectively) and application of slag in 4 levels (S1, S2, S3 and S4 equal to 3.20, 7.28, 11.36 and 15.44 ton/ha, respectively) which supply 1, 2, 3 and 4 times as much as soil test recommends, based on AB-DTPA extractable Fe in the soil. Corn (Zea mays) single cross 704 was planted for the experiment. Applications of the two compounds increased the soil extractable Fe and Mn, decreased Mg but the treatment did not change the soil-extractable Zn, Cu and Ca. The corn yield also increased due to the applications of the two compounds and the maximum yield was related to L3, L4, S3 and S4 treatments. The foliar application treated the leaf chlorosis and increased the silage, grain and leaf + stalk yields however, this was not as efficient as sludge and slag application. Also applications of the two compounds increased the Fe, Mn, Zn, Cu, Ca and Mg uptake by corn. The L3 and S3 treatments can be recommended as the proper levels of these compounds as iron fertilizer.
N Shahmirzaee, S Kamgar,
Volume 13, Issue 47 (4-2009)
Abstract
One of the most important goals of precision farming is preparing yield map. Recently in Iran, planting of corn has received special attention. Therefore, among the different methods of yield measurement such as using impact sensor at the outlet port of forage harvester (chopper), displacement sensors at feed rollers of forage harvester, continuous measurement of discharged material to trailing wagon and using the torque meter, the present study made use of the torque meter method. This method consisted of a torque transmitting shaft equipped with laser-based encoders to monitor twist in a real time mode. The unit output could be exported to a computer via a microcontroller installed into the interface device. For calibration of the torque meter output with material feed rate in lab conditions, a conveyor was used to feed homogenous amount of material at a specific rate to the chopper. The experiment was conducted at 3 feed rates of silage corn and at 3 feed roll speeds of the chopper with 3 replications. Correlation between the feed rate and recorded power at different gears of the chopper was established. Relationships between feed rate and recorded power of the chopper at gears 1, 2 and 3 were linear with calculated R2 of 0.95, 0,98 and 0.98, respectively.
A.h Khoshgoftarmanesh , A Sanaei Ostovar ,
Volume 13, Issue 50 (1-2010)
Abstract
The objective of this study was to evaluate the possibility of using treated industrial by-products as a zinc (Zn) source and compare their Zn availability and efficiency to ZnSO4. A greenhouse factorial experiment in a completely randomized block design was conducted with corn (Zea mays L.) in triplicates. Treatments included three Zn sources (ZnSO4, IUT-UT in size of < 1 mm and IUT-UT in size of 2-3 mm) at three rates (0, 20 and 40 kg ha-1). The results showed that Zn application both in the form of ZnSO4 and treated industrial by-products significantly (P < 0.05) increased the growth and shoot dry matter yield of corn. Shoot dry matter weight of corn in pots that had received IUTUT was higher compared to those that had received ZnSO4. The highest shoot dry matter weight was produced at the IUT-UT treatment in size of < 1 mm. Increased fertilizer rate significantly (P < 0.05) enhanced shoot and root Zn concentration. However, this increase was higher in ZnSO4 treatment as compared to the IUT-UT treatments. Application of the IUT-UT caused a significant increase in shoot Fe concentration of corn. Shoot and root Cd concentration in all experimental treatments was less than 0.02 mg kg-1. The results showed that IUT-UT can be used as a slow-release Zn fertilizer with low impurity.
E Fatahi Kiasari , A Fotovvat, A.r Astaraei , Gh Haghnia ,
Volume 14, Issue 51 (4-2010)
Abstract
The contamination of soils with lead is a major environmental problem throughout the world. Phytoextraction of heavy metals from contaminated soils has the prospect of being a more economic in situ alternative. Chemically enhanced phytoextraction has been proposed as an effective approach to remove heavy metals from contaminated soil through the use of high biomass plants. Using a pot experiment, the effects of the application of three rates of EDTA at 0, 1.5 and 3 mmol/kg soil and sulfuric acid at 0, 0.5 and 1 mmol/kg soil with two rates of Pb at 0 and 200 mmol.kg-1 on the uptake of Pb by corn (Zea mays L. single cross 704 var.), sunflower (Helianthus annuus L. ajili var.), and cotton (Gossypium hirsutum L. varamin var.) plants were studied. The results showed that EDTA was more effective than sulfuric acid in increasing the concentration of Pb in shoots and roots for all plants studied. The maximum amount with application of EDTA to soil for shoots of corn, sunflower, and cotton were 4.07, 6.49 and 31.33 times higher than the control, respectively. EDTA also enhanced Pb content of roots of corn, sunflower, and cotton 3.38, 1.63 and 1.09 times higher than the control, respectively. DTPA-Pb was higher in soil treated with EDTA than sulfuric acid. The application of EDTA also significantly increased shoot-to-root ratio of Pb in plants examined. The results of this study showed that corn was able to phytoextract more Pb than sunflower and cotton.
H Shirani, M.a Hajabbasi, M Afyuni , A Hemmat ,
Volume 14, Issue 51 (4-2010)
Abstract
Tillage systems and organic manures could affect soil physical and mechanical properties. This study was conducted to investigate the impacts of two tillage systems including conventional tillage by moldboard plowing (plowing depth, 30 cm) and reduced tillage by disk plow (plowing depth, 15 cm) and three rates (0, 30 and 60 ton ha-1) of farmyard manure (FYM) on the soil penetration resistance under corn cropping in a split block design with 3 replications. The cone index (CI) decreased with increase of the tillage depth. It is attributable to soil disturbing and loosening of the deeper layers under conventional tillage compared to reduced tillage. This trend, however, was observed only in the first (after treatments’ application and before cropping) and second (the highest rate of vegetative growth) samplings. In the third sampling (after harvest), there were not significant differences between the CI values under two tillage systems in different soil depths. It might be due to soil re-compaction (approaching the pre-tillage state) as well as disappearance of the tillage effects seven month after commencement of the experiment. In fact, the soil mechanical resistance increased with the time indicating soil re-compaction over the growing season. Adding FYM to the surface layer (i.e. 0-10 cm) of ridge soil resulted in significant decrease of soil mechanical resistance compared to control treatment. The CI decreased significantly in the 30 ton ha-1 treatment up to the stage of highest rate of vegetative grow, but the effect on CI was diminished after harvest. However, the decreasing effects of the 60 ton ha-1 treatment on the CI continued to the harvesting time. There were no significant effects of FYM in the soil deeper than 10 cm from the ridge surface and in all of the layers in furrow. The CI did not decrease significantly in the furrow due to negligible effect of manure application for the inter-row position.
M Karimpour, M Afyuni, A Esmaili Sari,
Volume 14, Issue 52 (7-2010)
Abstract
Sewage sludge application on farmland as fertilizer is commonly practiced in many countries. However, high concentration of heavy metals like mercury (Hg) in sludge can cause pollution of soil, plant and the human food chain. In order to examine the risk of Hg transfer into plants a five year field experiment was conducted in which we investigated uptake of Hg from a sludge-amended soil by corn. Sludge application rates were 0, 25, 50 and 100 Mg ha-1. To study cumulative and residual effects of the sewage sludge, applications were repeated on 4/5 of each plot in second year, on 3/5 of plots in third year, on 2/5 of plots in fourth year and in 1/5 of plots in fifth year. After the fifth year, soil samples from the 0-20 and 20-40 cm depths were taken and analyzed for total Hg. Corn plants were harvested and roots, stems and grains were separately analyzed for Hg concentrations. Sludge application significantly increased total Hg concentration in soil. Total Hg concentration in soil ranged from 20 µg kg-1 (in control plots) to 1200 µg kg-1 (in plots with 500 Mg ha-1 sludge application). Sludge application significantly increased uptake of Hg in different plant parts. At the end of the fifth year the average Hg concentrations in root, stem, and grain were 91, 9, and 8 µg kg-1, respectively. Corn yield increased significantly with sludge application and this fertilizer effect was visible five years after a single sludge application.
H.r. Eshghizade, A.h. Khoshgoftarmanesh, P. Ehsanzadeh, M. Kafi,
Volume 15, Issue 57 (10-2011)
Abstract
The growth and fluorescence parameters of chlorophyll in four corn hybrids including two sweet (K.S.C. 403 and K.S.C. 404) and two grain hybrids (S.C. 500 and S.C. 700) were evaluated in response to Fe and Zn nutrition in a nutrient solution culture. This study was conducted in a randomized complete block design with a factorial arrangement with three replications at the Soilless Culture Research Center (SCRC). Corn hybrids were exposed to two Fe levels (5 and 50 µM Fe in the form of FeEDTA) and two Zn levels (0 and 2 µM Zn in the form of ZnSO4). Increasing Fe concentration in the nutrient solution increased F0, Fm, and Fv/Fm values by 48, 96, and 123%, respectively. The fluorescence parameters of chlorophyll were affected by corn hybrid and there were significant differences in F0 and Fv/Fm at 1% level and Fm at 5% probability level among the studied hybrids. Iron deficiency significantly (P<0.05) reduced the root dry weight of all the studied hybrids. Zinc deficiency resulted in a significant decrease in the root dry weight of H403 and H500 hybrids while no significant decrease was found in the root dry weight of the H404 and H700 hybrids under Zn condition. The results showed that corn hybrids varied significantly in their tolerance to Fe and Zn deficiency. Based on the results of plant growth and fluorescence parameters of chlorophyll, the studied grain corn hybrids were more tolerant to Fe and Zn deficiency conditions in comparison with sweet corn hybrids. It seems fluorescence parameters of chlorophyll might be suitable parameters to screen corn hybrids in their tolerance to Zn and particularly Fe deficiency condition.
M. Ansari Azabadi , H.shirani, H. Dashti, A. Tajabadipur ,
Volume 15, Issue 57 (10-2011)
Abstract
Calcareous and gypsiferous soils are restricting factors for uptake of some plant nutrient elements and plant production. Most soils in Iran are calcareous and gypsiferous. Therefore, the aim of this study was the evaluation of calcium carbonate (Caco3) and gypsum effect on availability of some nutrients and corn growth. This study was conducted in a greenhouse at Vli-e-Asr University of Rafsanjan. Treatments were arranged in a factorial manner as a completely randomized design with three replications. Treatments were three levels of Caco3 (0, 20 and 40 g/100g soil), gypsum at three levels (0, 15 and 30 g/100g soil) and two soil textures (Sand and Silt clay loam). Results indicate that irrespective of soil texture, Caco3 application significantly decreased leaf area (by 80% and 15% for sand and silty clay loam texture, respectively), dry weight (by 80% and 15% respectively), plant height (regressed on Caco3 percentage by slopes -0.7 and -0.15 for sand and silty clay loam respectively), and shoot Fe (-9.67 and -11.3) and Zn (-0.24 and -1) uptake, but had no significant effect on shoot Cu uptake. In sandy soil, application of gypsum, significantly decreased leaf area (80%), dry weight (62%), and shoot Cu uptake (slope= -1.93), but had no significant effect on plant height and shoot Zn uptake. Gypsum application significantly reduced shoot Fe uptake (slope= -24.86) in fine textured soil, but it had no significant effect in coarse textured soil.
R. Taghizadeh, R. Seyed Sharifi,
Volume 15, Issue 57 (10-2011)
Abstract
In order to evaluate the effects of nitrogen fertilizer levels on grain yield and nitrogen use efficiency in corn cultivars, a split plot experiment based on randomized complete block design with three replications was conducted at the Research Farm of Islamic Azad University of Ardabil during 2006-2007 cropping seasons. Factors consisted of nitrogen fertilizer at four levels (0, 80, 160 and 240 kg/ha) and corn cultivars at three levels (SC-310, SC-404 and DC-370). The results showed that grain yield was significantly affected by nitrogen levels, corn cultivar and nitrogen level × corn cultivars. The highest grain yield was related to application of 240 kg/ha nitrogen with SC-404 cultivar. Nitrogen levels of 160 and 240 kg/ha had similar yields, but more yield than 80 kg/ha. With increasing of nitrogen levels, plant height, the number of grains per ear rows significantly increased. Comparisons of means showed that increasing the application of nitrogen fertilizer decreased nitrogen use efficiency. Nitrogen use efficiency decreased from 17.13 kg/kg with application of 80 kg/ha nitrogen fertilizer to 12.4 kg/kg in application of 240 kg/ha nitrogen fertilizer. Nitrogen use efficiency was affected by corn cultivar. Nitrogen use efficiency in SC-404 was higher than SC-301. In conclusion, in order to increase grain yield and nitrogen use efficiency, SC-404 hybrid should be applied with 160 kg N/ha in climatic conditions of Ardabil Plain.
M. Mansourzadeh, F. Raiesi,
Volume 16, Issue 59 (4-2012)
Abstract
The application of herbicides as organic chemical compounds to control pest and weeds may affect the population and activity of microorganisms, and this may have an influence on biochemical processes that are important for soil fertility and plant growth. The primary objective of this study was to evaluate different loading rates of eradican (EPTC) on soil microbial biomass C and N, microbial biomass C/N ratio and the activities of urease and arylsulphatase under field conditions. In this experiment, loading rates of 6 and 9 L ha-1 eradican were applied to a calcareous soil cultivated with corn (Zea mays L.) and left uncultivated using split-plots arranged in a completely randomized block design with three replications. The experiment was conducted in the Kabootarabad’s Agricultural Research Center, Isfahan. Soil microbial biomass C and N were determined at 30th and 90th days after the onset of experiment and the activities of urease and arylsulphatase were assayed at 30th, 60th and 90th days. Results showed that in soils cultivated with corn microbial biomass C increased with increasing eradican levels and in both cultivated and uncultivated soils microbial biomass N and microbial biomass C/N ratios were increased over the control. At 30th day, urease activity at 6 L ha-1 level reduced, while at 9 L ha-1 level it increased compared with the control soils. At 60 day, there was no significant difference in the urease activity between the treatments. At 90th day, the activity of urease showed slight fluctuations. There was a reduction in arylsulphatase activity of the cultivated soils by increasing the loading rates of eradican during the experiment, and in uncultivated soils no trend was observed. Briefly, the use of eradican can cause either reduced or increased microbial biomass sizes and enzyme activities in calcareous soils These changes, however, depend largely upon the application rate of eradican, time elapsed since eradican application (i.e., sampling date) and the presence or absence of plant
R. Hamzenejad Taghlidabad, H. Khodaverdiloo, S. Rezapour, Sh. Manafi,
Volume 16, Issue 60 (7-2012)
Abstract
Soil contamination with heavy metals, including Cd and Pb, is of serious concern. The aim of this study was to investigate the efficiency of Atriplex verucifera, Salicornia europaea and Chenopodium album for simultaneous remediation of soil exchangeable sodium percentage and Cd and Pb contamination in two soils with different properties. Two soils, including a saline-sodic-calcareous (S1) and calcareous (S2) soil, were selected. Different concentrations of Pb and Cd were then added to the soils. The contaminated soils were incubated under a wetting-drying cycle for nearly seven months. The plants, seeds were grown in pots containing different treatments of polluted soils and in control treatment (no Cd and Pb contaminations). The plant yields and concentrations of Pb, Cd and Na in the soil and plant samples were measured. A considerable accumulation of soil Cd by Salicornia and Pb accumulation by Atriplex and Salicornia was observed under unsuitable conditions of the saline-sodic soil, whereas Atriplex and Chenopodium had high capability for Cd in the soil S2. Also these plants caused the reduction of ESP in soil S1. The results revealed that these plants could be used for remediation of Pb and Cd contaminated soils. In this study, Salicornia with lower rate of yield reduction had the highest tolerance to Cd-stress. Understanding the complex plant and soil (salinity-sodicity and soil metal concentration) factors controlling the metals concentrations in the plants will help to design phytoextraction technology for arid, salt-affected regions.
M. J. Fereidooni, H. Farajee, H. R. Owliaie, E. Adhami,
Volume 16, Issue 60 (7-2012)
Abstract
Effect of urban sewage and nitrogen on soil chemical characteristics in sweet corn was evaluated in Yasouj region at 2009. Five irrigation treatments were managed common water during entire period of growing season as control (I1) urban sewage during the first half of growing season (I2) urban sewage during the second half of growing season (I3) alternate urban sewage and common water (I4) and urban sewage during entire period of growing season (I5) and three nitrogen rates (N0=0, N80= 80 and N160=160 kg N ha-1) in a completely randomized design with three replications. Results indicated that the soil N, P and K concentrations in treatment I5 had a significant difference compared to the other irrigation treatments. Irrigation levels were also exhibited a significant difference in soil organic matter and EC. Maximum and minimum of soil organic matter were observed in I5 (%0.45) and in I1 (%0.33), respectively. Maximum and minimum of soil EC were found in I5 (2.0 dsm-1) and in I1 (1.4 dsm-1), respectively. Irrigation treatments did not show a significant change in soil pH. The effect of irrigation and interaction between irrigation treatments and nitrogen rates were not significant on available forms of Fe, Zn, Cu and Mn in soil. The effect of nitrogen fertilizer was significant on soil N content. Maximum (%0.034) and minimum (%0.030) of soil nitrogen were noticed in N160 and N0, respectively.
A. Hassanpour, M. Zahedi, A. H. Khoshgoftarmanesh,
Volume 18, Issue 68 (9-2014)
Abstract
In a pot experiment, the effect of soybeans, mung beans and beans on the corn and sunflowers in a cadmium contaminated soil was studied in a completely randomized design with three replications. The treatments consisted of intercropping of corn and mung bean corn and beans, corn and soybean, sunflower and mung bean, sunflower and beans, sunflower and soybean monoculture of corn, and monoculture of sunflower. There were significant effects of cocropping of companion crops on shoot dry weigh, the concentration of cadmium and zinc and the chlorophyll content of corn and sunflower. In this study the shoot weight of corn grown with bean and soybean and that of sunflower grown with bean plants was decreased as compared to the related monocultures. The concentration of cadmium was increased in the corn grown with soybean or mungbean and in sunflower grown with soybean. Co- cropping with bean plants had no significant effects on the concentration of cadmium in corn or sunflower. Among companion crops, the concentration of cadmium was higher in bean plants compared to those of soybean and mungbean plants. The chlorophyll content in the leaves of corn plants grown with mungbean was increased with an increase in cadmium concentration. However, this trend was not observed in other treatments. The results of this study show that co- cropping with either soybean or mungbean may increase cadmium uptake by corn and sunflower which in turn may increase the risk of inflowing of toxin cadmium into the food chain. However, further study needs to re-evaluate the effect of these companion crops on the distribution of cadmium in the edible parts of corn and sunflower.
D. Akbari Nodehi,
Volume 18, Issue 70 (3-2015)
Abstract
In order to investigate the effects of furrow irrigation and amount of irrigation water on yield and water use efficiency of corn, an experiment was conducted as a split plot based on a randomized complete block design with three replications for a period of two years at Agriculture Center of Mazandaran. Treatments included three levels of 100, 80 and 60 percent water requirement as the main treatments, and three irrigation methods included fixed every-other- furrow, alternative every-other- furrow and every-furrow irrigation as the subsidiary treatments. Statistical analysis of the results of two years' data showed that treatment with 100% water requirement with every-furrow irrigation and treatment with 60% irrigation water requirement with fixed every-other-furrow had the highest and lowest yield, respectively. The highest water use efficiency was in 60 percent irrigation water requirement with a fixed every-other- furrow treatment and the lowest water use efficiency was related to the treatment with 100 percent irrigation water requirement with alternative every-other- furrow. The value of ky was obtained 0.8 for the total growth stage.
A Heidari, H. Haji Agha Alizadeh, A. R. Yazdanpanah, J. Amiri Parian,
Volume 20, Issue 78 (1-2017)
Abstract
Traditionally, most corn field in Hamedan Province is prepared for planting by moldboard plowing followed by a number of secondary tillage operations. In recent years conservation tillage systems have become more popular. This research was conducted in the form of a split plot experimental design with six tillage treatments and three replications. Main tillage methods including: (T1) conventional tillage (moldboard plow + cyclotiller equipped with roller), (T2) combination tiller (chisel plow equipped with roller) (T3) bandary tillage with chisel blades were considered as main plots and two P fertilizer application including: (F1) fertilize broadcasting and (F2) fertilizer bandary placement were considered as sub plots. During growing seasons, soil mechanical resistance (cone index), soil bulk density and water infiltration in soil were measured. At the end of the growing season (harvesting time), corn yield and its components were measured. Results indicated that tillage methods and soil depth had a significant effect on the soil bulk density and cone index. The effect of tillage on water infiltration in soil was significant. The effect of P fertilizer application on corn yield was significant (P≤0/01) and P fertilizer bandary placement with mean corn yield of 10862 kg/ha had higher yield value than the fertilizer broadcasting with mean corn yield of 9965 kg/ha. Although the difference between tillage methods for corn yield was not statistically different, T2 treatment with mean corn yield of 10913 kg/ha had higher yield value than the other two tillage treatments (T1 with mean corn yield of 10106 kg/ha and T3 with mean corn yield of 10222 kg/ha).
M. Rishcefid, N. Aliasgharzad, M. R. Neyshabouri,
Volume 21, Issue 1 (6-2017)
Abstract
Glomalin is a glycoprotein identified in and extracted from cell walls of hyphae and spores of Glomeral fungi. It deposites on soil particles and acts as a glue which leads to the formation and stabilization of soil aggregates. Water deficit stress by affecting mycorrizal symbiosis can alter glomalin production. This study was conducted as a factorial experiment arranged in a completely randomized design (CRD) with four replications using corn (Zea mays L. Single cross 704) under greenhouse conditions. The first factor was three levels of soil moisture including 10-30% (W0), 35-55% (W1), 60-90% depletion of available water (W2) and the second factor was three species of mycorrhizal fungi, Glomus versiforme (Gv), Glomus intraradices (Gi), Glomus etunicatum (Ge) and non mycorrhizal control (NM). At the end of vegetative growth, easily extractable glomalin (EEG) and total glomalin (TG) were measured using the Bradford method after extraction from soil. Shoot and root dry weights and root colonization decreased by declining soil moisture level. Water deficit significantly increased the amount of EEG and TG in soil. Also, a significant increase in glomalin production was observed at W2 level in all three fungal species compared to the W0 and W1 moisture levels. Moreover, by enhancing water deficit stress and decreasing root colonization, glomalin production per unit percent of root colonization was significantly increased.
A. Ghasemi, A. Ghanbari, B. A. Fakheri, H. Fanaie,
Volume 21, Issue 3 (11-2017)
Abstract
In line with sustainable agriculture development, an experiment was conducted including tillage as the main factor in two conventional systems (plowing and mixing fertilizer with soil) and no tillage (leaving residuals of green manure and direct corn sowing). The fertilizer resources were T0: control, T1: barley green manure without chemical and manure fertilizers, T2: barley green manure with full use of the recommended chemical fertilizer (NPK) to barley containing urea, super triple phosphate and potassium sulphate respectively as 165, 90, and 75 kg/ ha, T3: green manure with two -third residual of chemical fertilizer for barley and a third of the residual to corn, T4: green manure with one- third chemical fertilizer for barley and two-third for corn, T5: barley green manure mixed with 50% manure and 50% chemical fertilizer, and T6: green manure with 40 tons of manure used as a sub-plot in the split plot and in completely random blocks with three replications for two crop years ( 2013-2014) at the Agricultural Research Station, Sistan. The results showed that in comparison with no-tillage, the conventional tillage resulted in a significant increase in grain yield, the contents of nitrogen, phosphorus, potassium and soil organic carbon, bulk density and moisture content of the soil decreased in the conventional tillage. Sources of fertilizer (organic and chemical fertilizers) significantly increased soil organic carbon, nitrogen, phosphorus, potassium, and soil moisture content. The pH and soil bulk density factors decreased after using manure sources. Interaction tillage in the fertilizer sources showed that in the conventional tillage and Treatment T5 (mixture of manure, green and chemical fertilizers) the highest yield of corn was obtained with an average of 8471 kg/ha. The results of this experiment reported that using conventional tillage system with mixture of 50% manure, green and chemical fertilizers can increase corn grain yield, provide the dynamics of nitrogen, phosphorus, potassium, organic carbon, and improve soil bulk density and soil pH.
M. H. Rasouli-Sadaghiani, R. Ebrahimi Karimabad, R. Vahedi,
Volume 24, Issue 3 (11-2020)
Abstract
In order to investigate P acquisition efficiency (PACE) and P utilization efficiency (PUTE) of the corn in the presence of phosphate-solubilizing microorganisms (PSMs), a factorial experiment was carried out in a completely randomized design in the greenhouse. The factors were including P sources (tricalcium phosphate (TCP) and rock phosphate (RP)) and microbial inoculation (control, soluble P as KH2PO4 (Ps), inoculation with bacteria (PSB), inoculation with fungi (PSF), co-inoculation of PSB + PSF). At the end of growth period, plant dry weight and P content in plant and soil available-P were measured and then PACE, PUTE and phosphorus efficiency (PE) indices were calculated. The results showed that, the interaction of phosphate source and microbial inoculation was significant with respect to shoot P content, soil P, PUTE and PE. PSF-TCP treatment increased 7 times shoot phosphorus content compared to cont-RP treatment. PUTE in Cont-TCP treatment was 2.35 times higher than the TCP-PS. The inoculation of PSF increased the PACE 1.61 times compared to co-inoculation of PSB + PSF tretment. Also, the highest PE index (99%) was obtained from SF-TCP treatment. In general, in calcareous soils with low P availability, inoculation of PSM with insoluble phosphorus sources can meet the phosphate needs of the plant.
H. Motaghian, M. Shirmohammadi, A. Hosseinpur,
Volume 25, Issue 2 (9-2021)
Abstract
Iron (Fe) is an essential micronutrient for plants and its deficiency occurs in calcareous soils. However, a suitable extractant for the estimation of plant-available Fe and its critical level in calcareous soils depends on the type of soil and plant. The objective of the present study was to evaluate several chemical extractants to estimate available Fe and its critical level for corn growing in calcareous soils from Chaharmahal-Va-Bakhtiari Province. The amount of available Fe was measured by DTPA-TEA, AB-DTPA, 0.01 M calcium chloride, Mehlich IІ, and Mehlich ІІI extractants. At the end of the experiment, corn was harvested, and dry weight, Fe concentration in the plant, and the amount of Fe uptake by corn were determined. Extracted Fe had a significant correlation with all extractants used with maize indices. . The highest correlation coefficients were determined between the DTPA-TEA (0.32-0.94) and AB-DTPA (0.43–0.96) methods and the plant indices. The results of this research showed that the DTPA-TEA and AB-DTPA methods were the most suitable extractants for predicting available Fe content in these soils and the critical level of Fe extracted by these extractants was 2.81 and 3.67 mg kg-1.
