Showing 53 results for Grain
Mohammad Rabiee, Masoud Kavosi, Hassan Shokri Vahed, Pari Tousi Kehal,
Volume 17, Issue 64 (9-2013)
Abstract
In order to evaluate the effect of concentration and time of foliar spraying of nitrogen fertilizer as supplemenfary to soil nutrition on grain yield and some important traits of rapeseed (Hyola401), an experiment was conducted in complete randomized block design with 16 treatments and three replications in in 2008-2009, 2009-2010 growing seasons, and in 2003-2005 growing seasons in paddy fields of Rice Research Institute of Iran (Rasht). In this experiment, nitrogen concentration (from urea source) at two levels (5 and 100.00) and application time at seven levels including 1-seedling stage: 6-8 leaves 2: beginning of stem elongation 3: prior to flowering 4: 6-8 leaves + stem elongation 5: 6-8 leaves + prior to flowering 6: stem elongation+ prior to flowering 7: 6-8 leaves + stem elongation+ prior to flowering with two control treatments including zero nitrogen fertilizer and basal fertilization as 1/3 at seed sowing, 1/3 at stem elongation and 1/3 prior to flowering stages of 180 kg pure N ha were considered. Results of combined analysis showed significant differences between the experimental treatments in most traits. Spray application of nitrogen (100.00) in stem elongation+prior to flowering stage produced maximum silique length (6.8 cm), number of secondary branch (7.1) and plant height (141.1 cm). Also, the spray application (100.00) in 6-8 leaves+stem elongation+ prior to flowering stage had maximum biological yield (10684.6 kg.ha-1), grain and oil yields (3686.2 and 1489.3 kg.ha-1, respectively) and the maturity period (202 days). Spray application (100.00) in stem elongation+ prior to flowering stage did not induce significant difference with spray application (100.00) in the three stages. Maximum oil content was observed in control treatment (zero nitrogen fertilizer) with an average of (44 %). According to the results of the present experiment, it seems that spray application of nitrogen (100.00) at final growth stage of rapeseed (stem elongation+ prior to flowering stage) increases grain and oil yields.
H. Azimzadeh, F. Fotoohi, M. R. Ekhtesasi,
Volume 18, Issue 68 (9-2014)
Abstract
Soil surface roughness (SSR) is one of the important factors in wind and water erosion studies and control. Several parameters such as surface rock fragments influence SSR. Main objectives of this paper are to study and compare (Allmarass) random roughness (RR) and tortuosity (Tb) indices in coarse, medium and fine grain plains of Yazd-Ardakan and investigate the relationship between indices and desert pavement coverage. Roughness data were obtained by pin roghness-meter and roller chain in the three mentioned plains. RR and Tb were measured in 90cm transect length with systematic sampling pattern after determining the boundary of three kinds of plains. In each plain, 30 transects were randomly sampled and the height of soil surface roughness fractions was recorded. Distance of pins in the applied roughness meter is about 2cm. Therefore, in each 90 cm transect the height of 46 points was measured. Desert pavement coverage was measured in 20×20cm2 plots. The result showed that desert pavement coverage in coarse, medium and fine grain plains were in the range of 55-100, 40-85 and less than 5%, respectively. The relationship between RR and desert pavement was significant. The result of ANOVA (Duncan) showed, RR and Tb were significantly different in coarse, medium and fine grain plains (p-value<0.01). In addition, by increasing desert pavement percentage RR and Tb increased exponentially in base of Neper number. The relation between RR and desert pavement coverage is stronger than Tb and desert pavement coverage. Correlation between the two measured indices was calculated and compared in different plains. The result revealed that about 54, 33 and 14% of the arability in Tb could be explained by RR in coarse and medium grain plains, respectively. The correlations of two indices were significant in coarse and medium plain and insignificant in fine grain plain. The trend of RR and Tb decreased from mountain to plain center. Although RR increased slightly in fine grain plain, the difference was not significant.
E. Amiri, A. A. Mahboubi, M. R. Mosaddeghi, H. Shirani,
Volume 18, Issue 68 (9-2014)
Abstract
In this study, the effect of soil structure under saturated and unsaturated flow conditions on nonreactive bromide (BR) transport was investigated. The soil structure treatments consisted of undisturbed columns (prismatic and granular structures), and disturbed columns (single- grain structure). A constant concentration (C0= 0.005 M) of bromide was supplied on the surface of the columns in a steady-state flow condition. For the saturated flow condition, a flux equal to the highest saturated hydraulic conductivity (Ks) of the columns was applied on all of the columns. To create the unsaturated flow condition, a flux equal to the half of the lowest Ks of the columns was imposed on all of the columns.
The leaching of the columns was followed for five pore volumes (5PV) and the bromide concentration of the effluent was measured at 0.2PV intervals using bromide selective electrode. The breakthrough curve (BTC) of single- grain structure was sigmoidal (S-shaped) and similar to piston-capillry flow form. In contrast, BTCs of the granular and prismatic structures had a steep initial part and later gradual tailed part. The preferential pathways caused the early appearance of bromide in the leachate of columns of these two structures. Tailing of the BTCs might be due to dispersion and diffusion between mobile and immobile water fractions. In saturated condition, the bromide plume appeared earlier than that in the unsaturated condition because of domination of mass flow and rapid macroporous stream. The results demonstrated the importance of soil structure, preferential pathways, and flow conditions in solute and pollutant transport.
J. Hamzei, M. Seyedi,
Volume 18, Issue 70 (3-2015)
Abstract
This experiment was carried out at the Agricultural Research Station of Bu-Ali Sina University to study the effect of different tillage methods on bulk density, yield, and yield components of barley (Hordeum vulgare) cultivars under rainfed conditions. Three levels of tillage (CT: conventional tillage, MT: minimum tillage and NT: no tillage) and five barely cultivars (V1: Local V2: AbidarV3: Valfagr V4: Bahman and V5: Makouei) were evaluated in a factorial arrangement in a completely randomized block design with three replications in the growing season of 2010-11. Traits of bulk density plant height, grain yield, yield components, biological yield, and harvest index (HI) were evaluated. The results showed that maximum value of bulk density (1.09, 1.26 and 1.29 g cm-3 for 0-10, 10-20 and 20-30 cm of sampling depth, respectively) was observed at MT treatment. But, there was no significant difference between MT and NT treatments for this trait. In comparison of cultivars, maximum bulk density was achieved with Valfagr cultivar. Using chisel plow (MT treatment) produced maximum plant height (70 cm) and yield components (513 numbers of spike m-2 and 19.2 grain spik-1). Also, among cultivars maximum plant height (72.7 cm) and grain number spike-1 (23.2 grain spike-1) belonged to Valfagr cultivar. Also, results showed that V3×MT treatment had the highest grain yield (3100 kg ha-1). Therefore, the findings of the study recommend using chisel plow (MT treatment) and Valfagr cultivar.
M. Rezvani, M. Shafiezadeh,
Volume 19, Issue 71 (6-2015)
Abstract
Nowadays, due to the effective role of nitrogen fertilizer in growth, yield and crop quality, farmers apply large amount of chemical fertilizers. High application of nitrogen fertilizers has caused soil and water pollution and environmental dangers, higher nitrate accumulation in plant, and different disease risks in human and livestock. In order to investigate the effects of nitrogen and cycocel application effects on soil nitrate pollution and agronomic traits of rice, an experiment was arranged in split plot based on a completely randomized block design with three replicates at Sari region (north of Iran) in 2010. The main factor was nitrogen in four levels and cycocel was considered as a sub factor in three levels. Results showed that maximum and minimum plant height and fourth internodes bending moment were obtained in 0 and 150 kg N ha-1, respectively. Higher filled spikelet percentage per panicle, grain yield and harvest index were obtained in 100 kg N ha-1 application. Application of N up to 150 kg N ha-1 increased soil nitrate by 44.7 percent. As cycocel application decreased, the plant height and panicle length were reduced, but tiller number per plant, filled spikelet percentage per panicle, and grain yield were increased.
M. Najafi-Ghiri,
Volume 20, Issue 77 (11-2016)
Abstract
The status of soil K forms and its relationship with K content in wheat grain at harvest period may be important for nutrient fertility management. For this purpose, 40 surface (0-20 cm) and subsurface (20-40 cm) soil samples and also grain samples from wheat fields of Darab region were randomly sampled in 2014. Then physicochemical properties of the soils and the contents of soluble, exchangeable and non-exchangeable K and contents of K in wheat grains were determined. Results indicated that content of soluble, exchangeable and non-exchangeable K in the studied soils ranged 15-70, 91-443 and 396-1182 mg kg-1, respectively. Significant relationships were obtained between soil K forms and clay, calcium carbonate and CEC. Although it is expected that content of easily available K (soluble and exchangeable K) was low at late stage of wheat growth, most soils had sufficient K content. The positive and significant relationship among different K forms was indicative of the K forms equilibration at the time of wheat harvesting. Although there is not a relationship between K content in wheat grain and soil K forms, it was shown that K content of wheat grain was correlated with soil exchangeable K and clay content in fine-textured soils (clay > 30%). It means that ammonium acetate may be a suitable extractant for estimation of soil K status and plant available K of heavy-textured soils in the studied region.
Y. Choopan, A. Khashei Siuki, A. Shahidi,
Volume 21, Issue 4 (2-2018)
Abstract
Limited water resource in arid and semi-arid areas is one of the most important problems in the agricultural sector. Therefore, the use of non-conventional water resources becomes more important. For this reason, a study was conducted on barley to evaluate the effect of irrigation with sugar plant wastewater as a factorial randomized complete block design field experiment. Treatments include water well I1, wastewater I2, combined water and wastewater I3 (the ratio of seven to one, according to local practice) in two levels of without water stress S1 and %75 water stress S2 and treatment I1S1 was considered as control. The results showed changes in surface tension of %1 had a statistically significant effect on plant height, grain yield and root length. As well changes of irrigation water in the level of %1 had a statistically significant effect on plant height, grain protein yield and root length. Maximum grain yield was obtained in treatment I1S1 with the weight of 4034 kg per hectare and lowest grain yield was obtained in treatment I2S2 with the weight of 1564 kg per hectare. The lowest and highest percentages of protein content were observed in treatment I1S1 for 12.37% and treatment I2S2 for 13.47%, respectively. The plant height showed the highest amount in control treatment, i.e. 82.87 Cm.
M. Yazdekhasti, M. Shayannejad, H. Eshghizadeh, M. Feizi,
Volume 22, Issue 3 (11-2018)
Abstract
Due to the dry climate and limitation of fresh water resources, using fresh and salt water is a solution for crop production under salinity conditions. This study was conducted at Isfahan University of Technology as a randomized complete block design with three replications and five irrigation management treatments in 2014. The treatments included irrigation with saline water (with the salinity of 5 dS/m, based on the relative yield of 75%), irrigation with fresh water (municipal water), alternate irrigation (irrigation with saline water and the next irrigation with fresh water), conjunctive irrigation (half of irrigation with saline water and the other one with fresh water) and irrigation with fresh water to reach the raceme stage, and irrigation with saline water. The maximum wet yield, dry yield and grain yield were related to the fresh water treatment with 4.14, 2.45 and 0.588 kg/m2 and the minimum values were obtained for water their water treated with 1.34, 0.765 and 0.0957 kg/m2 respectively. The conjunctive treatment had the highest yield after fresh water treatment. The various statistical indices showed that this model could be used for sorghum in Isfahan. The determination coefficient for yield was 0.65.The priority of model for yield simulation was salt water at the last stage, alternate irrigation, saline water, conjunctive irrigation and fresh water treatments, respectively.
S. Abdi, A. Pirzad,
Volume 23, Issue 1 (6-2019)
Abstract
Water stress is one of the most important factors limiting the growth and production of crops in arid and semi-arid regions. To evaluate the effect of mycorrhizal fungi species on the growth and yield (quantity and quality) of Onobrychis sativa under water deficit condition, a greenhouse factorial experiment based on completely randomized design (CRD) with three replications was conducted in 2014. Treatments included five species of mycorrhizal fungi (Fanelormis mosseae, Rhizophagus intraradices, Claroideoglomus claroideum, Funneliformis caledonius, Glomus versiforme and non-mycorrhizal control) and two levels of irrigation (irrigation at 80% [well watering] and 50% [water deficit] field capacity [FC]). The highest grain yield (9.187 g/plant) was obtained from the stressed plants inoculated with Rh. intraradices with the same grain yield of F. mosseae inoculated plants (8.867 g/plant). With a significant reduction in the grain yield of stressed plants, mycorrhizal relationships even increased the yield more than the well-watered plants. Despite the decreases in the grain protein and phosphorous of water-deficit stressed mycorrhizal plants, the highest grain protein content was obtained from the plants inoculated with G. versiforme, and the highest grain phosphorus content was obtained from the plants inoculated with F. mosseae. Mycorrhizal symbiosis enhanced the yield and the quality of Sanfoin grain in water deficit stressed plants due to reducing root volume against the stimulating root elongation. In this way, the species G. versiforme exhibited the greatest positive effect.
M. Amerian, S. E. Hashemi Garmdareh, A. Karami,
Volume 24, Issue 3 (11-2020)
Abstract
Today, one of the biggest challenges facing the world is the lack of water, especially in the agricultural sector. In this research, we investigated the effects of irrigation method and deficit irrigation with the urban refined effluent on biomass, grain yield, yield components and water use efficiency in single grain crosses 704 maize. This research was carried out in a randomized complete block design with two irrigation systems (furrow irrigation (F) and drip irrigation (T)) and three levels of deficit irrigation treatments of 100 (D1), 75 (D2) and 55 (D3) percent of water requirements in three replications, in 2017, at the collage of Abourihan Research field, University of Tehran, in Pakdasht County. The results showed that the highest yield of biomass was 2.426 Kg m-2 for full drip irrigation treatments; also, there was no significant difference between D1 and D2 treatments. The highest grain yield was 1.240 kg m-2 for the complete drip irrigation treatment. The highest biomass water use efficiency was obtained for the treatment of 75% drip irrigation, which was equal to 5.3 kg per cubic meter of water. Therefore, a drip irrigation system with 75% water requirement is optimal and could be recommended.
M. Mokari,
Volume 24, Issue 4 (2-2021)
Abstract
Optimal use of water resources seem to be necessary due to climate change and the recent drought conditions. One of the most important and effective management strategies is increasing water productivity in agriculture. Irrigation method and the use of different levels of nitrogen fertilizer are the effective factors in increasing the water productivity. Therefore, this study was conducted to investigate the effect of the irrigation method and nitrogen fertilizer on the harvest index and water productivity of two wheat cultivars with 36 treatments as a split-split plot based on a completely randomized design with three replications in the research farm of Natural Resources and Agricultural Research Center of Kashmar, during the 2018-2019 time period. The treatments were two irrigation methods including end blocked border and drip irrigation (tape) as the main plots, three levels of the nitrogen fertilizer from urea source including 0, 50 and 100 kg/ha as the sub plots and two cultivars of wheat including Pishgam and Sirvan as the sub-sub plots. The results showed that by changing the border irrigation method to the drip irrigation (tape) method, the harvest index and water productivity were increasesignificantly. The results also showed that grain yield and its components, including harvest index and water productivity, had no significant difference in 50 and 100 kg/ha nitrogen levels. On the other hand, grain yield and its components, harvest index and water productivity, were significantly higher in the Sirvan cultivar rather than the Pishgam one (P<0.01). According to the results obtained from this study, the drip irrigation method, 50 kg/ha nitrogen level and Sirvan cultivar could be recommended for the study region.
N. Salamati, A. Danaie,
Volume 24, Issue 4 (2-2021)
Abstract
In order to study and evaluate the drought stress indices in surface irrigation by furrow method on grain yield, the yield components and water use efficiency, an experiment was conducted at Behbahan Agricultural Research Station in 2014-16. The experiment was conducted as a split plot in a randomized complete block design with 4 replications. Irrigation at two levels (irrigation after 100 and 200 mm evaporation from Class A pan, respectively) was evaluated as the main factor and corn cultivar was considered at 6 levels as the sub-factor. Comparison of the mean water use efficiency in irrigation and cultivar interactions showed 100 mm evaporation from Class A pan and cultivars V4 (PH1), V5 (PH3) and V2 (SC Mobin) were ranked the first and foremost, respectively, with the yields of 1.353, 1.299 and 1.296 kg of corn per kg of water consumed, respectively. The mean water consumed in 2014 of the experiment in 100 and 200 mm evaporation from Class A pan was 521.2 and 462.4 mm, respectively. Pearson correlation coefficient results also showed that with increasing the yield components, such as the number of grains per row and number of rows, the 1000-grain weight was increased due to the highly significant correlation coefficient of 1000-grain weight with grain yield (r = 0.8776). Consequently, grain yield was also increased. The highest values of SSI, STI, MP, TOL, GMP HM and YI indices were calculated in V4 (PH1). The higher values of the above indices in cultivar V4 (PH1) than other cultivars caused this treatment to be introduced as the superior one. The decreasing trend of corn yield, which was caused by water deficit stress, increased SSI, STI, MP, TOL, GMP and YI indices, while it decreased corn yield, leading to incremental changes in the YSI indices.
N. Salamati, A. Danaie, L. Behbahani,
Volume 25, Issue 2 (9-2021)
Abstract
To investigate and evaluate the effects of different levels of drip irrigation on grain yield and yield components, oil yield, seed oil percentage, and seed water use efficiency, an experiment was performed at Behbahan Agricultural Research Station during two crop years 2018-19 and 2019-20. The experiment was conducted in split plots based on a randomized complete block design with 3 replications. The amount of water in tape drip irrigation was compared at four levels of 40, 60, 80, and 100% water requirement in main plots and two sesame cultivars Local of Behbahan and Shevin in subplots from the beginning of flowering. Comparison of mean interaction effects of irrigation levels and cultivars showed that the treatment of 100% water requirement in the Behbahan local cultivar with the yield of 1218.0 kg/ha was ranked first and foremost. Water consumption in the highest treatment (100% water requirement and Behbahan local cultivar) was calculated to be 5389.4 m3/ha. Treatments of 100% and 80% of water requirement in superior cultivar (local Behbahan) with water use efficiency of 0.226 and 0.210 kg/m3 had no significant difference, respectively, and were in the first place. Pearson correlation coefficient calculated for the measured traits showed that the highest correlation of water volume was calculated (r = 0.9271) with the weight of one thousand seeds. Significant correlations of water volume with grain yield and yield components indicated that sesame was susceptible to drought stress and attention to optimal water management in sesame cultivation. Therefore, decreasing the volume of water consumed and consequently drought stress in sesame reduced yield and yield components.
