JWSS - Journal of Water and Soil Science

---

In order to study the correlation of agronomic, morphologic and physiologic traits and their effects on grain yield of rice genotypes in two environments (favorable irrigation and water stress), 49 genotypes were evaluated using a completely randomized block design with 3 replications in two experimental conditions. All practices and conditions were the same for the two experiments with the exception of irrigation, where under stress conditions no irrigation was applied at tillering stage. Comparison of means showed significant differences between genotypes in each environment. Also, differences between yield and yield components of each genotype under two conditions were significant. The results of phenotypic correlations showed that the highest positive and significant correlation with grain yield belonged to number of panicle per plant (0.95) in irrigation conditions and to number of filled grains per panicle (0.92) in water stress conditions. Stepwise regression analysis for grain yield introduced number of panicle per plant, relative water content (RWC), flag leaf length and number of spikelet per panicle, respectively, as effective traits in grain yield in irrigation conditions, however, in stress conditions, number of filled grain per panicle, number of panicle per plant and relative water content were effective traits in yield. The results of path analysis showed that the number of panicle per plant had the highest positive and direct effect on grain yield in the two environments. Factor analysis introduced four factors in the two conditions named yield and crop production, phenologic, harvest index and plant shape and appearance quality of grains factors. Therefore, to select high yield and drought tolerant genotypes, we need to consider number of filled grain per panicle, number of panicle per plant and relative water content. In addition, traits such as panicle length, number of spikelet per panicle, flag leaf length and width that showed significant correlations with grain yield in stress conditions should also be considered important and second to the above mentioned traits.

---

In order to evaluate the effects of nitrogen fertilizer levels on grain yield and nitrogen use efficiency in corn cultivars, a split plot experiment based on randomized complete block design with three replications was conducted at the Research Farm of Islamic Azad University of Ardabil during 2006-2007 cropping seasons. Factors consisted of nitrogen fertilizer at four levels (0, 80, 160 and 240 kg/ha) and corn cultivars at three levels (SC-310, SC-404 and DC-370). The results showed that grain yield was significantly affected by nitrogen levels, corn cultivar and nitrogen level × corn cultivars. The highest grain yield was related to application of 240 kg/ha nitrogen with SC-404 cultivar. Nitrogen levels of 160 and 240 kg/ha had similar yields, but more yield than 80 kg/ha. With increasing of nitrogen levels, plant height, the number of grains per ear rows significantly increased. Comparisons of means showed that increasing the application of nitrogen fertilizer decreased nitrogen use efficiency. Nitrogen use efficiency decreased from 17.13 kg/kg with application of 80 kg/ha nitrogen fertilizer to 12.4 kg/kg in application of 240 kg/ha nitrogen fertilizer. Nitrogen use efficiency was affected by corn cultivar. Nitrogen use efficiency in SC-404 was higher than SC-301. In conclusion, in order to increase grain yield and nitrogen use efficiency, SC-404 hybrid should be applied with 160 kg N/ha in climatic conditions of Ardabil Plain.

---

To determine the proper nitrogen fertilizer rates and its application times for achieving high grain and oil yields of rapeseed cultivar, Hyola 401, a research was carried out in paddy fields of Rice Research Institute of Iran in Rasht during two cropping seasons. A factorial experiment was conducted in a completely randomized block design with three replications. The experimental factors were pure nitrogen fertilizer rate at five levels of 0, 60, 120, 180 and 240 Kg ha-1 and fertilizer application times at five levels of all fertilizer at planting 1/3 at planting + 2/3 in stem elongation 1/3 at planting + 1/3 in stem elongation + 1/3 before flowering 1/3 in 3-4 leaf stages + 1/3 in stem elongation +1/3 before flowering 1/4 at planting + 1/4 in 3-4 leaf stages + 1/4 in stem elongation + 1/4 before flowering. The results of statistical analyses showed that from amony nitrogen rates, application of 240 Kg N ha-1 and 180 Kg N ha-1 with average production of 2505 Kg ha-1 and 2596 Kg ha-1 respectively showed the highest grain yield and were in the same group. of Nitrogen application times, application of 1/3 at planting + 1/3 in stem elongation + 1/3 before flowering had the highest grain and oil yields with average of 2155.3 Kg ha-1 and 9865 Kg ha-1, respectively. Maximum oil percentage was observed in control treatment (without N-fertilizer application) and the highest oil yield was obtained for nitrogen rates of 180 and 240 Kg ha-1. Also, the highest growth period was observed for the treatment of 240 Kg nitrogen with 206.3 days. The results showed that nonsignificant difference exists between the nitrogen rates of 180 and 240 Kg ha-1 in grain and oil yields. Therefore, the rate of 180 Kg ha-1 is recomended due to less fertilizer consumption and prevention of destructive effect on the environment

---

To evaluate the effect of nitrogen slowly released from pellet, composed of manure and urea fertilizer on the Nitrogen efficiency and morphological Characteristics and grain yield of corn hybrid (S.C704), a field experiment was carried out in Aboureihan research farm of Tehran University in 2009. The factorial design of the study comprised a randomized complete block with three replications. The application rates of N at four levels (46, 92, 138 and 184 kg N. ha-1) and two levels by methods of N distribution (pellet and mixed with soil) were applied. In this research, a Screw Extruder setup was designed and manufactured. Statistical analysis indicated that NUE, as well as agronomic efficiency (AE) was reduced while physiological efficiency (PE) increased with increasing N rates. Also, most plant length and stem diagonal and cob diagonal pellet belonged to the treatment. But, the number of leaves per plant did not affect the distribution method of fertilizer.The results showed significant differences among various rates of nitrogen and methods of N distribution considering grain yield and grain protein. The higher rates of N increased grain protein, grain yield and yield components (except for number of rows per ear). Maximum grain yield (11.1 t. ha-1) was obtained with 184 kg N. Ha-1 treatment.

---

To evaluate effect of different irrigation regimes and mycorrhizal fungi on the growth and yield of mungbean NM92 [Vigna radiata (L.) Wilczk], a field experiment was conducted in split plot arrangements using randomized complete block design (Irrigation after 50, 100, 150 and 200 mm evaporation from pan class A as main plots and mycorrhiza species, Glomus mosseae, G. intraradices and a non-inoculated treatment as sub-plots) with three replications at the Research field of Urmia university in 2009. Results showed that irrigation after 50mm evaporation from pan class A, and plant inoculated with G. intraradices produced the highest grain yield (1678.5 kg/ha and 1537.6 kg/ha, respectively), total dry weight, leaf dry weight, leaf area index, crop growth rate, relative growth rate and net assimilation rate. In Contrast, irrigation after 200 mm evaporation from class A pan and non-inoculated treatment produced the lowest grain yeild (1159.2 and 1301.9 kg/ha, respectively). Reducing the irrigation distance led to an increase in total dry weight, leaf dry weight, leaf area index, crop growth rate, relative growth rate and net assimilation rate. Despite lower grain yield in water deficit condition, AM fungi inoculation significantly reduced the effect of stress on grain yield. All inall, both mycorrhizae species significantly (P 0.05) increased the grain yield of mungbean under well-watered and water deficit conditions

---

In order to evaluate the effect of concentration and time of foliar spraying of nitrogen fertilizer as supplemenfary to soil nutrition on grain yield and some important traits of rapeseed (Hyola401), an experiment was conducted in complete randomized block design with 16 treatments and three replications in in 2008-2009, 2009-2010 growing seasons, and in 2003-2005 growing seasons in paddy fields of Rice Research Institute of Iran (Rasht). In this experiment, nitrogen concentration (from urea source) at two levels (5 and 100.00) and application time at seven levels including 1-seedling stage: 6-8 leaves 2: beginning of stem elongation 3: prior to flowering 4: 6-8 leaves + stem elongation 5: 6-8 leaves + prior to flowering 6: stem elongation+ prior to flowering 7: 6-8 leaves + stem elongation+ prior to flowering with two control treatments including zero nitrogen fertilizer and basal fertilization as 1/3 at seed sowing, 1/3 at stem elongation and 1/3 prior to flowering stages of 180 kg pure N ha were considered. Results of combined analysis showed significant differences between the experimental treatments in most traits. Spray application of nitrogen (100.00) in stem elongation+prior to flowering stage produced maximum silique length (6.8 cm), number of secondary branch (7.1) and plant height (141.1 cm). Also, the spray application (100.00) in 6-8 leaves+stem elongation+ prior to flowering stage had maximum biological yield (10684.6 kg.ha-1), grain and oil yields (3686.2 and 1489.3 kg.ha-1, respectively) and the maturity period (202 days). Spray application (100.00) in stem elongation+ prior to flowering stage did not induce significant difference with spray application (100.00) in the three stages. Maximum oil content was observed in control treatment (zero nitrogen fertilizer) with an average of (44 %). According to the results of the present experiment, it seems that spray application of nitrogen (100.00) at final growth stage of rapeseed (stem elongation+ prior to flowering stage) increases grain and oil yields.

---

This experiment was carried out at the Agricultural Research Station of Bu-Ali Sina University to study the effect of different tillage methods on bulk density, yield, and yield components of barley (Hordeum vulgare) cultivars under rainfed conditions. Three levels of tillage (CT: conventional tillage, MT: minimum tillage and NT: no tillage) and five barely cultivars (V1: Local V2: AbidarV3: Valfagr V4: Bahman and V5: Makouei) were evaluated in a factorial arrangement in a completely randomized block design with three replications in the growing season of 2010-11. Traits of bulk density plant height, grain yield, yield components, biological yield, and harvest index (HI) were evaluated. The results showed that maximum value of bulk density (1.09, 1.26 and 1.29 g cm-3 for 0-10, 10-20 and 20-30 cm of sampling depth, respectively) was observed at MT treatment. But, there was no significant difference between MT and NT treatments for this trait. In comparison of cultivars, maximum bulk density was achieved with Valfagr cultivar. Using chisel plow (MT treatment) produced maximum plant height (70 cm) and yield components (513 numbers of spike m-2 and 19.2 grain spik-1). Also, among cultivars maximum plant height (72.7 cm) and grain number spike-1 (23.2 grain spike-1) belonged to Valfagr cultivar. Also, results showed that V3×MT treatment had the highest grain yield (3100 kg ha-1). Therefore, the findings of the study recommend using chisel plow (MT treatment) and Valfagr cultivar.

---

Nowadays, due to the effective role of nitrogen fertilizer in growth, yield and crop quality, farmers apply large amount of chemical fertilizers. High application of nitrogen fertilizers has caused soil and water pollution and environmental dangers, higher nitrate accumulation in plant, and different disease risks in human and livestock. In order to investigate the effects of nitrogen and cycocel application effects on soil nitrate pollution and agronomic traits of rice, an experiment was arranged in split plot based on a completely randomized block design with three replicates at Sari region (north of Iran) in 2010. The main factor was nitrogen in four levels and cycocel was considered as a sub factor in three levels. Results showed that maximum and minimum plant height and fourth internodes bending moment were obtained in 0 and 150 kg N ha-1, respectively. Higher filled spikelet percentage per panicle, grain yield and harvest index were obtained in 100 kg N ha-1 application. Application of N up to 150 kg N ha-1 increased soil nitrate by 44.7 percent. As cycocel application decreased, the plant height and panicle length were reduced, but tiller number per plant, filled spikelet percentage per panicle, and grain yield were increased.

---

---