J. Karimi Shiasi, F. Fotouhi Firoozabad, A. Fathzadeh, M. Hayatzadeh, M. Shirmardi,
Volume 29, Issue 1 (4-2025)
Abstract
One of the main factors contributing to water erosion is the inherent characteristic of soil erodibility. Erodibility depends on particle size distribution, organic matter, structure, and soil permeability. This research aimed to investigate changes in the soil erodibility factor across geomorphological facies. The soil erodibility index was estimated by sampling 58 points within the geomorphological facies of the Dorahan watershed, using the Wischmeyer and Smith method. In the laboratory, soil granularity distribution, organic matter, soil structure, the amount of gravel, lime, salinity, acidity, and sodium absorption ratio were measured. Results indicated that soil erodibility across the entire area ranges from 0.0148 to 0.0661 (t.hr/Mj.mm). The soil erodibility index (K) for the hro-p1 and hro-p2 facies is higher than for others and exhibits the widest range of variations compared to the other facies. The lowest range of changes within geomorphological facies is associated with the hrc facies. The erodibility index decreases from the east to the west of the basin due to the presence of exposed rock faces, which protect the soil as a cover layer.
Sh. Amiri, B. Khalili,
Volume 29, Issue 1 (4-2025)
Abstract
Soils are continuously exposed to large amounts of engineered nanoparticles, particularly silver nanoparticles (AgNPs), which can affect soil microbial activities and nitrogen cycling. The hypotheses of the present study were: (i) vegetation types would differ in their responses to Ag types and concentrations, (ii) these responses would be linked to changes in soil protein and amino acid concentrations, and (iii) combined plant root systems alongside Ag types and concentrations would have offsetting effects on soil protein and amino acid concentrations. A greenhouse experiment was conducted to test these hypotheses using a factorial arrangement of treatments within a randomized block design. Two soil types with loamy sand and sandy loam textures were collected from agricultural fields in Isfahan, specifically from the Badroud (33◦ 44′ 50" N, 51◦ 57′ 55" E) and Femi (33◦ 42′ 17" N, 51◦ 59′58" E) regions. The treatments included: 1) soil types (loamy sand and sandy loam), 2) root systems (non-planted, wheat, and safflower), 3) Ag types (no Ag added, AgNPs, and AgNO3), and 4) Ag concentrations (50 and 100 ppm). The plants were harvested 110 days after sowing, with soil samples collected from both the root zone and non-planted soil, after which the concentrations of protein and amino acids were measured. In the Badroud soil, protein concentration significantly decreased (p < 0.05) with increasing depth. Although depth changes did not show a significant difference in protein concentration in the soil under wheat cultivation, increasing depth resulted in a significant decrease (p < 0.05) in protein concentration in the soil under safflower cultivation. In the Fami soil, the addition of silver nitrate led to a significant (p < 0.05) increase in protein concentration, despite the fact that the addition of silver nanoparticles had no significant (p < 0.05) effect on soil protein concentration. In the Badroud soil, the highest concentration of soil amino acids was observed in the silver nitrate treatment, while the silver nanoparticle treatment did not significantly affect soil amino acid concentrations (p < 0.05). However, applying silver treatments at both tested concentrations resulted in a significant increase (p < 0.05) in soil amino acid levels. Overall, the effects of nanoparticles varied depending on the measured parameters (protein or amino acid), soil texture, and type of cultivation. Further studies are needed to determine the mechanisms by which AgNPs and AgNO3 affect the soil nitrogen cycle in the presence of plants at different soil depths.
M. Zarinibahador,
Volume 29, Issue 1 (4-2025)
Abstract
The calcium carbonate equivalent (CCE) in soil is one of the most important soil properties. Predicting the amount of calcium carbonate equivalent in soil is essential for sustainable soil fertility management. The present study aimed to digitally map calcium carbonate equivalent using auxiliary environmental variables, Landsat 8 satellite images, and predictive models and to present the best models in the Badr watershed in the south of Qorveh district. In the first phase, a geomorphologic map was created using a geologic map and based on the ZINC method in a geographic information system environment. In the second phase, the location of 125 survey profiles was determined using the Latin hypercube technique, and the calcium carbonate equivalent of the soil horizons was measured by acid titration. The auxiliary variables included derivatives of the digital elevation model, remote sensing indices from the Landsat 8 satellite, and a geopedological map. The principal component analysis (PCA) method was used to select suitable auxiliary variables. In the third phase, the modeling was carried out, digital maps of the soil classes and properties were created, and the models were evaluated. Two different cases were investigated in this study to estimate the calcium carbonate equivalent of the soil. In the first case, artificial neural network models, decision tree analysis, random forest, and the K-nearest neighbor model were used for prediction. The multiple linear regression model was also used to combine the results of the models. Among the models used to predict the equivalent amount of calcium carbonate using the 10-fold cross-validation method, the multiple linear regression (MLR) model had the highest prediction accuracy with a coefficient of determination of 0.796 and a mean square error of 6.514. In the 5-fold cross-validation method, the K-nearest neighbor (KNN) model had the highest predictive accuracy with a coefficient of determination of 0.9845 and a root mean square error of 2.1258. Due to the spatial nature of the 10-fold cross-validation method, the use of this method is preferable to the 5-fold cross-validation method. In addition, the most important auxiliary variables in order of importance to predict the calcium carbonate equivalent in soil were the carbonate index, slope direction, geomorphology, the base level of the catchment network, and the slope of the catchment.
H. Ramezani Etedali, S. Koohi,
Volume 29, Issue 1 (4-2025)
Abstract
Agriculture, as a crucial economic and social sector in Iran, has always been significantly influenced by weather conditions, water availability, and farm management practices. Enhancing productivity and optimizing resource management in crop production are essential to achieving sustainable agricultural development and ensuring food security. This research aimed to investigate how much wheat, barley, and corn production, separately from irrigated and rainfed crops, will be affected by the severity of climatic drought (based on the CMIP6) in Iran. This research was carried out using the amount of wheat, barley, and corn production in all the provinces, which was provided by the Agricultural Jihad Organization during the years 1371 to 1402. Climate data was obtained from the NEX-GDDP database, and the De Martonne aridity index was calculated to investigate changes in aridity under climate scenarios. The results indicated that during the baseline period, the production of rainfed wheat, barley, and corn under semi-arid to very arid climatic conditions was approximately 2,076, 434, and 15 thousand tons per year, respectively. With the intensification of arid conditions across the country, these production levels are projected to increase to 3,333, 693, and 16 thousand tons under the SSP2 scenario and further rise to 3,558, 842, and 16 thousand tons under the SSP5 scenario. Additionally, the production of irrigated wheat, barley, and corn in semi-arid to very arid climatic conditions during the baseline period stands at approximately 6,240, 1,683, and 5,842 thousand tons, respectively. Under the SSP2 climate scenario, the production is expected to reach about 7,126, 1,757, and 6,253 thousand tons, while in the SSP5 scenario, the estimated production is approximately 7,348, 1,780, and 6,324 thousand tons. The findings revealed notable spatial differences in crop production across the country, highlighting that the climatic conditions, particularly in the central, southern, southeastern, and southwestern regions, are becoming increasingly arid. It is crucial to implement smart planning and policies, adopt advanced technologies, and improve the management of water and soil resources to mitigate the adverse impacts of these changes and better adapt to evolving conditions. Addressing these challenges and implementing effective measures are essential steps toward achieving sustainability in the agriculture and natural resources sectors.
A. Mirzaei, A. Soltani, F. Abbasi, E. Zeinali, Sh. Mirkarimi,
Volume 29, Issue 1 (4-2025)
Abstract
Water scarcity and adaptation to it are the most significant issues facing Iran's agriculture. Optimizing the cropping pattern is one of the fundamental strategies for addressing water scarcity. This study evaluated the optimization of the cropping pattern in the irrigated lands of Fars province, one of Iran's key agricultural production areas. Linear mathematical programming and the SAWA system (System for Provincial Agricultural Water Balance and Accounting) were employed. The optimal cropping pattern (OCP) was designed to minimize applied irrigation water and was compared with the current cropping pattern (CCP) as well as a proposed cropping pattern from the Agricultural Jahad Organization (CPAJO) for the province for the cropping year 2023-2024. The results indicated that in the OCP, compared to the CCP, the cultivated area for the following crops decreased: wheat by 30%, barley, grain maize, silage maize, alfalfa, sugar beet, potato, cold- season legumes, and cold-season oil crops by 60%, rice by 80%, warm-season fruit trees by 42%, and vegetables by 13%. Conversely, the cultivated area for warm-season legumes and cold-season fruit trees each increased by 60%, while cold-season legumes increased by 150%. To meet the adaptation goals for water scarcity and sustainable agriculture outlined in this study, a 24% reduction in the irrigated cultivation area of the province was deemed necessary. The OCP achieved a 34% reduction in applied irrigation water at the provincial level without decreasing farmers' income. Compared to the CCP, the OCP led to a 32% reduction in the amount of plant production (by weight) at the provincial level. However, prioritizing plants with higher gross economic profit and lower water consumption over those with lower gross economic profit and higher consumption resulted in the gross economic return of the OCP being comparable to that of the CCP and the CPAJO. The comparison of OCP with CPAJO indicated that the CPAJO has not seriously considered adaptability to water scarcity or agricultural sustainability. The CPAJO needs to be reviewed and optimized to address water scarcity and ensure production stability in light of the impacts of excessive water withdrawal in the province.
H.r. Zare Guildehi, H.a. Alikhani, H. Etesami, M. Shirinzadeh, Z. Karami, M. Gholami,
Volume 29, Issue 1 (4-2025)
Abstract
Soil and water pollution and waste of resources have occurred due to the excessive use of nitrogen fertilizers in paddy fields. Considering that the biofilm of periphyton formed in paddy fields is mainly responsible for the exchange of nutrients, the present research was designed to investigate the effect of periphyton in the nitrification process in paddy fields and performed with 12 treatments. The treatments included powerful and weak nitrifiers isolated from periphyton, periphyton, periphyton enriched with nitrifiers, and their combination with a dicyandiamide chemical inhibitor. The research was carried out in a rice greenhouse cultivation for 30 days. The results showed that the simultaneous application of periphyton enriched with low-power nitrifier and dicyandiamide can increase the amount of total soil nitrogen, soil phosphorus, soil ammonium, total plant nitrogen, plant phosphorus, plant potassium, shoot length, and dry weight of rice plants. While this treatment reduced the conversion of ammonium to nitrate and subsequently reduced the potential of nitrate formation in the soil, with the increase of ammonium accumulation, it increased the utilization of rice plants. Periphyton can be considered a source for the isolation of nitrifiers. Also, the use of periphyton in paddy fields as a biological and healthy solution to inhibit the nitrification process in front of the use of inhibiting chemicals is placed in the path of future research.
B. Naderi-Samani, M. Ghobadinia1, B. Haghighati, S.m.r. Hosseini-Vardanjani, A.r. Ahmadpour-Samani,
Volume 29, Issue 1 (4-2025)
Abstract
Awareness of the impact of water deficit stress on the quantitative and qualitative performance of agricultural products, considering the recent recurrent droughts and reduced precipitation, is essential for water consumption management. This study aimed to evaluate the effects of different irrigation deficit treatments on the yield, yield components, and water use efficiency of autumn wheat in the Shahrekord region. An experiment with three replications was conducted in a completely randomized block design at the Agricultural and Natural Resources Research Center of Chaharmahal Va Bakhtiari Province during 2023-2024. The experimental treatments included four irrigation levels: full irrigation (T100), 80% of full irrigation (T80), 60% of full irrigation (T60), and 40% of full irrigation (T40). The application of the T60 deficit irrigation treatment resulted in a reduction of more than 14% in grain yield, while the T80 treatment caused a more than 31% decrease in grain yield. Additionally, the T60 treatment exhibited the highest water use efficiency at 1.22 kg per cubic meter, while the water use efficiency for the T100, T80, and T40 treatments was 1.06, 1.12, and 1.19 kg per cubic meter, respectively. The results showed that water deficit irrigation significantly affected the grain yield, biomass, and water use efficiency of autumn wheat under the climatic conditions of the Shahrekord region. The results of this study indicated that the T80 deficit irrigation treatment could have a more acceptable performance in terms of water efficiency.
L. Babakhah, A. Khoshfetrat, E. Delavari,
Volume 29, Issue 1 (4-2025)
Abstract
Piano key weirs are a new form of labyrinth weirs and exhibit nonlinear characteristics. Due to their high efficiency regarding flow capacity, it is crucial to investigate local scour and identify solutions to mitigate it. Local scour was examined downstream of a trapezoidal piano key weir type B for the first time in this study. The weir was installed 5.50 m from the start of the channel and has a height of 0.20 m, featuring three cycles (three outlet keys, two inlet keys, and two inlet half keys). Three tailwater depths and three different flow rates were also utilized. The maximum scour depth increases with a higher densimetric Froude number and flow rate while decreasing with tailwater depth. The range of the dimensionless parameter for the densimetric Froude number in this study varies between 1 and 2. Additionally, sand and gravel were employed as two types of bed materials. As the diameter of the bed material increases, the maximum scour depth decreases. The scour index for gravel bed material is significantly lower than that for sand material, indicating that the risk of weir overturning is much lower in gravel bed material.
H. Ramezani Etedali, M. Ahmadi,
Volume 29, Issue 2 (7-2025)
Abstract
change, accurately predicting wheat production is essential for developing precision agriculture. Remote sensing enables the indirect prediction of crop production before harvest. This research investigates the application of the random forest method and support vector regression for simulating wheat production across ten selected farms in Qazvin Plain from 2019 to 2020, employing NDVI, MSAVI, and EVI vegetation indices. Sentinel 2 satellite data was utilized for the vegetation indices. Production data for the ten wheat fields was obtained from the Agricultural Jihad Organization of Qazvin Province. Evaluation of support vector regression and random forest to assess both the observed and simulated wheat production data was conducted using R2, MBE, RMSE, and MAE statistics. To explore the simulation of wheat production using vegetation indices, seven methods were defined: methods 1 to 3 examine each index separately; methods 4 to 6 focus on binary combinations of the indices; and method 7 considers the combined effects of all three indices. The support vector regression model provided good estimates of wheat production in all methods, except methods one and four, in the test phase, with a coefficient of determination of more than 0.98 and a low RMSE. The random forest model showed significant results in all methods except methods two and six during the test phase, achieving a 95% probability (P-value=0.00) with a coefficient of determination greater than 0.8. Overall, this research highlights the importance and potential of machine learning techniques for timely crop production prediction as a strong foundation for regional food security.
F. Zolfaghari, S. Eslamian, A.r. Gohari, M.m. Matinzadeh, S. Azadi,
Volume 29, Issue 2 (7-2025)
Abstract
Drought represents one of the most critical natural disasters, exerting profound impacts on agriculture, society, the economy, and water resources. Various indices are used to monitor drought and its effects. This study aims to monitor drought in the Zayandeh-Rud Basin using the Standardized Precipitation Index (SPI), the Standardized Precipitation-Evapotranspiration Index (SPEI), the Evaporative Demand Drought Index (EDDI), the Palmer Drought Severity Index (PDSI), and the Reconnaissance Drought Index (RDI). All these indices are based on potential evapotranspiration, incorporating parameters such as precipitation, temperature, relative humidity, wind speed, and sunshine duration. These five indices were calculated and evaluated during the statistical period of 1993–2023 for meteorological stations in Isfahan, East Isfahan, Kabootarabad, Daran, Shahreza, Najafabad, and Mobarakeh. After calculating the indices and using spatial zoning maps, the studied stations were compared in terms of these indices. The continuity of dry and wet periods, as well as the intensity of droughts and wet spells, was analyzed. Subsequently, drought intensities during different years in these stations were ranked using the TOPSIS model based on factors such as precipitation, potential evapotranspiration, and station elevation. The results showed that in stations with a dry climate (such as Isfahan, East Isfahan, and Shahreza), drought occurrences (as indicated by higher rankings) have been consecutive over multiple years. Comparing the performance of the indices in the studied stations using spatial zoning maps revealed that the intensity of droughts and wet spells in regions with dry and semi-dry climates was not very significant. However, in areas with humid climates, the fluctuations in drought and wet spell intensities were quite substantial. The findings indicate that the PDSI and EDDI indices are more suitable for evaluating drought in dry climates.
I. Saleh, S. Zandifar, M. Khazaei,
Volume 29, Issue 2 (7-2025)
Abstract
Groundwater resources are affected by long-term drought conditions and have received less attention than other issues. The current research was carried out to investigate and zone the quantitative fluctuations of groundwater as well as the temporal analysis of groundwater drought using GRI in the study area of Shiraz in the Maharloo-Bakhtegan watershed. The zoning of groundwater table variations was done in the ArcGIS environment, and a representative hydrograph of the aquifer was prepared using 15-year data (2003-2018) of groundwater resources divided into three five-year periods. Also, the drought of the groundwater resources of the studied plain was investigated using the GRI index. According to the results, the highest level of the groundwater table is related to the northwestern area of the plain by 1810.1 m in October 2007, and the lowest water table was observed in the southern study area with the amount of 1423.6 m in October 2017. Also, the results showed that the groundwater table faced a drop of 6 m and an average annual drop of 0.5 m during the studied 15 years. The volume changes of the reservoir also indicated that, in addition to consuming the entire renewable reserve, a large part of the fixed reserve has also been exploited in the past years. The descending trend of GRI and its intensification in the last years of the studied period is one of the most important results of this research, which occurred due to population growth and increasing cultivated area, a decrease in precipitation, and climate change.
S. Yousefi, S.n. Emami, M. Nekooeimehr, S. Mardanian,
Volume 29, Issue 2 (7-2025)
Abstract
In the present study, the Road Sediment Delivery Model (SEDMODL) and Geographic Information System (GIS) were utilized to estimate the average annual sedimentation caused by the forest road network in the oak forests in the west of Iran, Chaharmahal and Bakhtiari Provinces (Nazi forest road with a length of 5171 meters). Sedimentation from the study forest road network was estimated based on three basic factors in the model. Also, 30 erosion benchmarks were installed to measure the erosion and sedimentation rate at different distances from the road and in different parts of the study road and changes were measured during a year. The results showed that the average soil erosion at different distances from the Nazi road based on erosion benchmarks is 5.7 mm per year. In addition, the estimated erosion and sedimentation rate of the entire study road network based on the SEDMODL model is 2875 and 570 tons per year per kilometer, respectively. Model evaluation using erosion benchmarks showed that SEDMODL is a suitable model for estimating soil erosion on forest roads in the west of Iran (R2=0.78 and RMSE=0.73). It should be noted that statistical analysis of erosion hot-spot analysis showed that 39 percent of forest roads in Nazi showed very high erosion. Based on the results of the present study, it is suggested that conservative, protective, and road maintenance measures in areas with high erosion risk should be prioritized by decision-makers.
J. Ghaneiardakani, S.a. Mazhari, F. Ayati,
Volume 29, Issue 2 (7-2025)
Abstract
This study investigates the impact of agricultural activities on the soils of southern Mehriz by analyzing their geochemical composition and comparing the physicochemical properties of pistachio orchard soils (agricultural soils) with those of undisturbed natural soils. The results indicate that agricultural practices have led to an increase in Total Organic Carbon (TOC), averaging 1.5%, and a reduction in soil acidity. Additionally, phosphorus concentrations have risen in agricultural soils. These soils also exhibit enrichment in elements such as cadmium (Cd), antimony (Sb), chromium (Cr), nickel (Ni), lead (Pb), scandium (Sc), and rare earth elements (REE) compared to natural soils, with a more homogenized REE distribution pattern. Although the concentrations of these trace elements remain within national environmental standards and below critical thresholds, the study highlights a significant increase in the bioavailability of heavy metals due to agricultural activity. This finding underscores a potential environmental risk if such changes are not properly managed in the future.
M. Khoshoei,
Volume 29, Issue 2 (7-2025)
Abstract
The issue of water scarcity or the limited availability of water resources, including concepts such as water stress, water shortage, and water crisis, is investigated in this study. Water stress refers to problems related to access to freshwater resources, particularly due to the excessive withdrawal of surface and groundwater. A water crisis describes a situation where the available clean and safe drinking water in a specific region is insufficient to meet demand. Factors like drought, reduced rainfall, and pollution can exacerbate water stress. Water shortage arises from reasons such as the inability to meet demand, economic competition over water quality and quantity, conflicts among users, the irreversible depletion of groundwater resources, and negative environmental impacts. This study provides an index to assess water stress for spatial analysis in the study area and analyzes relevant data by collecting information from various sources. This index utilizes both static and dynamic parameters to estimate drought and better depict water stress conditions. Static parameters include land use, slope, and soil type. Dynamic parameters include precipitation, temperature, and groundwater level. Kashan County was selected as the case study due to the continuous reduction in water resources. The results showed that in the water years 2005, 2014, 2020, and 2021, Kashan experienced the highest level of water stress, while in the water years 2002, 2004, 2010, 2012, 2013, and 2015, it experienced the lowest level of water stress.
M. Askari Jabarabadi, N. Mirghaffari, J. Abedi Koopaei,
Volume 29, Issue 2 (7-2025)
Abstract
The water footprint is an analytical tool that offers a better and more comprehensive view of how consumers or producers engage with freshwater consumption. Given the water crisis in the country, particularly in Isfahan Province, this study aims to estimate and compare the direct and indirect water footprints of several large industries, including Mobarakeh Steel, Iron Smelting, Refinery, and Power Plant, located in the Zayandeh River Basin. After identifying the desired objectives and study areas, as well as confirming the availability of the required data, information was gathered from the selected industries. Two methods were then utilized to aggregate the entire chain and the sum of steps to calculate the water footprint in the researched industries. According to the calculations, the direct and indirect water footprint in the iron smelting industry amounts to 196.9 cubic meters per ton of steel annually, of which 4.026 cubic meters is attributed to direct consumption and 17.5 cubic meters to indirect consumption. In a refinery, 18.80 liters of water are consumed directly and indirectly to produce one barrel of product (gasoline or diesel). Additionally, the direct and indirect water footprint of the Islamabad power plant is 1,198,320 cubic meters per terajoule, equating to 4.31 liters per kilowatt hour. The results of this study indicate that the indirect water footprint in the analyzed industries is equal to or exceeds direct water consumption, with both being equally significant. Finally, it is important to note that the results of this study can support decision-makers and policymakers in the industry, including those in the iron and steel, refinery, and power plant sectors, in managing their water footprint.
M. Asadi, M. Noshadi, A.r. Noshadi,
Volume 29, Issue 2 (7-2025)
Abstract
In this research, drinking water quality was investigated using acceptability, health, and nutrition-based indicators from 2010 to 2022 in Shiraz City (Fars province). Magnesium, fluoride, and calcium play a significant role in the contribution of drinking water in Shiraz City to the intake of dietary minerals. The acceptability water quality index (AWQI), health-based water quality index (HWQI), and drinking water quality index (DWQI) rankings in Shiraz City are excellent, but the average drinking water nutritional quality index (DWNQI) of Shiraz City is 77.52 ± 5.47, which falls within the good ranking. Therefore, while the conventional water quality indices (AWQI, HWQI, and DWQI) are excellent, the DWNQI index does not achieve an excellent rating, due to the inclusion of the nutritional value of water in the DWNQI index. In general, the trend of AWQI, HWQI, DWQI, and DWNQI over thirteen years in Shiraz City shows that the conventional drinking water quality indices (AWQI, HWQI, and DWQI) do not provide an accurate picture of the assessment of drinking water quality in many cases, as they do not consider the nutritional role of water. For this reason, water is sometimes treated more than necessary. Therefore, it is essential to revise the interpretation of drinking water quality using the DWNQI index to gain a comprehensive picture of drinking water quality.
S.a. Ghaffari Nejad, F. Moshiri, S.m. Mousavi,
Volume 29, Issue 2 (7-2025)
Abstract
This study was conducted to evaluate soil fertility management scenarios including separate use of chemical and organic fertilizers (animal manure and municipal waste compost) and their integrated application on changes in the amount of available nitrogen, phosphorus, and potassium in the soil from November 2017 for four years in six consecutive crops at the Agricultural Research Station of the Soil and Water Research Institute. The results showed a depletion of 14 and 44% of soil available nitrogen and phosphorus, and no depletion of available potassium in the treatment without fertilizer in six consecutive cultivations. Annual consumption of 20 t ha-1 of municipal waste compost and 75% of the recommended nitrogen showed the highest amount of soil-available nitrogen. Unlike phosphorus, the amount of soil available nitrogen in municipal waste compost treatments was significantly higher than in cattle manure. The highest available soil phosphorus was in the treatment with 10 t ha-1 of cattle manure before each crop, and the average available phosphorus in six consecutive cultivations was significantly higher than in the other treatments. The use of 10 t ha-1 of cattle manure and municipal waste compost before each crop resulted in the highest accumulation of potassium in the soil, respectively. The available soil potassium in cattle manure treatments was significantly higher than in municipal waste compost. The results of this experiment indicated the importance of using fertilizers containing nitrogen, phosphorus, and potassium in maintaining soil fertility stability in the long term.
R. Ghasemi Ghasemvand, M. Heidarnejad, A.r. Masjedi, A. Bordbar,
Volume 29, Issue 2 (7-2025)
Abstract
the impact of hydraulic loss on the performance of weirs should not be overlooked. In this study, a laboratory flume measuring 8 meters in length, 0.6 meters in width, and 0.6 meters in height was used to investigate the hydraulic loss of the weirs and their discharge coefficients. The weirs used in this research were of the labyrinth type, featuring both curved and linear designs. Dimensional analysis using the Buckingham method indicated that the discharge coefficient (Cd) relies on parameters such as the hydraulic head ratio (Ht/P), weir shape factor (Sf), hydraulic loss ratio (Hf/P), and Froude number (Fr). The results demonstrated that an increase in hydraulic head leads to a decrease in the discharge coefficient of the weirs. Furthermore, the intensity of flow blade interference over the weirs gradually increases the hydraulic loss with a rising hydraulic head. Hydraulic loss increases up to a certain level of hydraulic head before beginning to decline. Therefore, it can be stated that the hydraulic loss curve for weirs like ARCL exhibits a sinusoidal trend. At a hydraulic head ratio of 0.4, the ARCL weir experiences 227% more hydraulic loss compared to the APKW weir. At a hydraulic head ratio of 0.6, the RCL weir shows 200% more hydraulic loss than the PKW weir. The trend of hydraulic loss variation with increasing Froude numbers for ARCL and RCL weirs is also sinusoidal. The ARCL weir shows the highest hydraulic loss with increasing Froude number compared to the other weirs. All weirs modeled using FLOW-3D software showed values (Cd and Hf/P) that exceeded those from physical modeling, which is significant in terms of safety factors. Moreover, the error rate in numerical modeling varied based on different parameters and conditions, averaging between 10% and 30%. In some cases, labyrinth weirs exhibited higher error rates compared to piano key weirs.
S. Rezaei, M. Heidarpour, A. Aghakhani,
Volume 29, Issue 2 (7-2025)
Abstract
The growing concern for environmental protection and increasing demand for green approaches to address environmental problems have prompted researchers to explore a sustainable and reliable method for treating dyeing wastewater. One of the sustainable and reliable methods is the electrocoagulation process. In this study, a batch electrocoagulation reactor was designed to evaluate the efficiency of this process in treating dyeing wastewater. The effects of two parameters, electrode distance and retention time, on pollutant removal efficiency were investigated. Electrode distances of 2, 5, and 7 cm were tested, and retention times of 10, 15, 20, 25, and 30 minutes were examined. Results indicated that the optimal electrode distance was 5 cm and the optimal retention time was 20 minutes. Under these conditions, the removal efficiency of BOD, COD, TSS, color, and turbidity reached 83%, 85%, 98%, 98%, and 93%, respectively. The results of this research demonstrate the significant potential of the electrocoagulation system for treating dyeing wastewater.
M.r. Shoaibi Nobariyan, M.h. Mohammadi,
Volume 29, Issue 2 (7-2025)
Abstract
The objective of this study is to investigate the effects of solutes and water quality on evaporation amount and rate in two sandy and clayey soils. Soil samples containing aggregates and sand particles with diameters ranging from 0.5 to 1 millimeter were collected. Six columns were prepared during the experiment; three columns were filled with sandy soil and three with aggregated soil, each measuring 60 cm in height and 15.5 cm in inner diameter. One reference column was filled with distilled water. A saturated calcium sulfate solution was added to two columns, a 0.01 molar calcium chloride solution was added to two other columns, and distilled water was added to the remaining two. The amount of water lost through evaporation was recorded every 8 to 12 hours by weighing the columns. After approximately 130 days, the columns were sectioned, allowing for the establishment of moisture and solute concentration profiles for each soil column. The results indicated that the first and second stages of evaporation were distinguishable in sandy soil, whereas in clayey soil (aggregated soil), only the first stage of evaporation occurred due to the gradual transfer of water and the continuous hydraulic connection from the surface to the water table. The presence and type of solutes affected the evaporation rate and moisture profile, reducing evaporation and increasing water retention in deeper soil layers. Hydraulic connectivity (calcium sulfate > calcium chloride > distilled water) and the resulting capillary rise of and supply of evaporated water from higher layers caused a greater evaporation rate in the calcium sulfate compared to the calcium chloride and distilled water treatments in both soil types. Additionally, the formation of a salt crust on the soil surface due to solutes disrupted the hydraulic connection with the surface, resulting in decreased evaporation rates and cumulative evaporation.
