Search published articles


Showing 152 results for Analysis

G. Mohammadi Nejad, A. M. Rezai,
Volume 11, Issue 1 (4-2007)
Abstract

This research was conducted at Rsearch Farm of Isfahan University of Technology to evaluate yield stability of 9 Oat (Avena sativa L.) genotypes and Makooi barley, to determine the contribution of each environmental factor to genotype × environment interaction, and to find the most stable yield component in these genotypes. Four Canadian cultivars and 5 Turkish breeding lines were included in this experiment. Three dates of planting (12 Oct. 31 Oct. and 21 Nov.) and three sowing rates (300, 375 and 450 seed m2) were used as 6 environments. In each environment a randomized complete blocks design with 3 replications was used. Grain yield, No. of panicle/m2, No. of seed/ panicle, and 1000-grain weight were measured. Result of combined analysis of variance showed highly significant (P < 0.01) difference among genotypes for all the studied traits. Significante differences were observed among environments for all the characteristics except for 1000-grain weight. Grain yield and its components showed highly significant genotype × environment interaction ffects. The ratio of genotype × environment interaction sum of square to total sum of square for grain yield (22.37%) was higher than other traits. Stability analysis based on regression coefficient showed that Boyer cultivar and Line No.28 with nearly b=1 and more than average yields were the most stable genotypes. Pacer cultivar and Makooi Barley had specific adaptations with suitable and unsuitable environments, respcctively. Based on deviation mean square, Boyer cultivar was the most stable one among high yielding genotypes. Tai’s path analysis of genotype × environment interaction showed that V3 genotypic component (Seed weight) was the most effective component of stability and yield. Boyer with the highest V3 score was the highest yielding and stable genotype. According to environmtntal component of path analysis, fertilization stage and grain filling period were the most sensitive growth stages to environmental conditions. Therefor, it is not effective to evaluate genotype stability according to V2 component (seed/panicle). Finally, according to the result of this experiment Boyer with grain yield of 5.8 t/ha and stable response in all environments was selected as a suitable cultivar for breeding programs or introduction for commertial production.
M. R. Jazayeri Nooshabadi, A. M . Rezai,
Volume 11, Issue 1 (4-2007)
Abstract

This research was conducted at Research Farm of Isfahan University of Technology to examine the relations among phonologic, morphologic and physiologic traits and their effects on grain yield of 20 oat (Avena sativa L.) genotypes. A randomized complete block design with three replications was used in each irrigation treatment (i.e. irrigation after 70±3, and 130±3 mm evaporation from class A pan). Grain yield had significant and positive correlations with harvest index and relative water content (RWC) in both irrigation treatments and with plant height at maturity in non-stress condition. Also, grain yield had significant and negative correlation with days to heading. Factor analyses resulted in three factors in each condition, which were named yield factor, phenologic factor and sink factor in both conditions. Based on stepwise regression, harvest index was the first character which entered the grain yield model in both conditions. At the next step, RWC and plant height entered the model, with harvest index explaining 66% and 64% of yield variation in stress and non-stress conditions, respectively. The results of path analysis in both conditions showed that harvest index had the highest positive direct effect on grain yield. The highest indirect negative effects through number of grain per panicle were obtained for the harvest index and panicle m-2 in stress and non-stress conditions, respectively.
L. Khodaei, H. Rahimian, R. Amiri, M. Mesbah, A. Mirzaei Asl, S. K. Kazemitabar,
Volume 11, Issue 1 (4-2007)
Abstract

Genetic male sterility is controlled by one pair of ressesive allele (aa) in sugar beet. This trait is used in most breeding programes. The exsistance of the character in a line or population facilitates transfer of important trait to the breeding material (for example resistance to plant disease). Also, it is possible to increase genetic diversity of monogerm populations by using genetic male sterility. The time and cost of transferring of this gene will be decreased, if the character is tagged with a molecular marker. Bulked segregant analysis using 302 RAPD primers in two F2 populations (231 and 261 population) was performed for the the identification of RAPD markers linked to the genetic male sterility gene. DNA preparation from 8 male fertile and male sterile plants were separately mixed. At first, the primers were tested on bulks. The primers with polymorphic bands were tested on individual plants of the bulks. Only if the polymorphism of the primers was confirmed, they were tested on the other individual plants. Finally, 10 and 6 markers were identified in 231 and 261 populations, respectively, which their distances to male sterility gene were lower than 50 cM. AB-8-18-600r marker was the nearest marker to male sterility gene. This marker showed only 3 and 1 recombination in 231 and 261 populations, respectively. The distance of this marker and genetic male sterility locus was estimated as 5.3 cM in combined F2 populations.
M.d. Shakouri, H. Kermanshahi,
Volume 11, Issue 40 (7-2007)
Abstract

In order to study the effect of corn, Ghods wheat, Falaat wheat, and triticale with or without enzyme addition on perormance and digestive tract characteristics, an experiment was carried out by using 288 male broiler chickens in a compeletly randomized design with 4*2 factorial arrangement for 57 days. Enzyme addition significantly decreased both feed conversion ratio of chickens fed Ghods wheat and triticale, and weight gain of chickens fed Ghods wheat. Growth performance of chickens fed Ghods wheat with enzyme was not significantly different compared with corn without enzyme. Enzyme addition decreased ileum relative weight of chickens. Gizzard and proventriculus of chickens fed Falaat wheat and triticale were heavier than those of other treatments. According to the results, enzyme supplementation showed positive effect on triticale and especially Ghods wheat based diets.
M. M. Majidi, A.f. Mirlohi, M.r. Sabzalian,
Volume 11, Issue 41 (10-2007)
Abstract

Fescues (Festuca spp) are widely distributed in the temperate regions and are used for turf, forage and soil conservation. Though seed traits are important measures of the effects of endophytic fungi on their host, little information is available in this respect for Festuca. In this study, endophyte-infected (E+) and endophyte-free (E-) clones of the six fescue genotypes were used to investigate the effects of endophyte on seed production. The relationships between seed traits plus direct and indirect effects of components on seed yield were also studied. Endophyte infection resulted in 38.1% to 249% more seed yields in some genotypes, though some were not affected by this symbiotic relationship. Correlations between traits and also results of stepwise regression were influenced by the presence of the symbiotic fungi. Path analysis showed that endophytic fungi changed direct and indirect effects of components on seed yield. In endophyte containing clones, panicle fertility had the most direct effects and number of panicle per plant and seed per panicle the most indirect effects on seed yield. In E- clones, panicle fertility had the highest indirect effects and other components had direct effects on seed yield. The results suggested that breeding strategies for increasing seed yield in fescue should consider the presence or absence of endophyte in germplasm.
V. Narjesi, H. Zeinal Khaneghah, A. Zali,
Volume 11, Issue 41 (10-2007)
Abstract

Thirty soybean cultivars from different maturity groups were evaluated in a randomized complete block design with four replications in Research Station of College of Agriculture at Tehran University in Karaj in 2004. The purpose was to determine genetic relationship of some important agronomic traits related to seed yield. Analysis of variance showed that there were significant differences among varieties for the traits under study, indicating the existence of genetic variation among varieties. Number of pods/plant, number of seeds/plant and 100-seed weight, all of which are considered yield components, had the highest genotypic correlation with seed yield. Using stepwise regression analysis, 85.6 % of seed yield variation was attributed to four traits, including harvest index, biological yield, protein precent and number of seeds /plant. Harvest index was more important for predicting seed yield compared to other traits based on standardized ßs. Results of path analysis showed that the harvest index and protein precentage had the highest and lowest direct and positive effect (p=0.536), (p=0.008), respectively. Therefore, harvest index may be considered as a selection criteria to improve seed yield in breeding programs. Results of factor analysis showed five independent factors accounted for 80.2 % of total variations in data. The first principle determined 28.2 % of total variation and was designated as phenologic factor.
M. Fazlalipour, B. Rabiei, H. Samizadeh Lahiji, H. Rahim Soroush,
Volume 11, Issue 42 (1-2008)
Abstract

  Application of selection index for screening desired plants based on complex quantitative traits can be more effective than direct selection. This study was conducted using an F2 rice population consisting of 87 plants derived from a cross between two cultivars Gharib and IR28. The purpose was to establish suitable selection indices for increasing yield and its related traits in research farm of Rice Research Institute of Iran (RRII), Rasht, in 2005. Studied traits included the days from sowing, germinated grain to maturity (MD), plant height (PH), panicle length (PL), flag leaf length (FL), flag leaf width (FW), number of panicles per plant (PP), number of grains per panicle (GP), number of spikelets per panicle (SP), 100-grain weight (GW), grain yield per plant (GY), biomass (BM), harvest index (HI), grain length (GL) and grain breadth (GB). Among the studied traits, 100-grain weight (GW), biomass (BM) and harvest index (HI) (0.99) and flag leaf width (FW) (0.35) showed the highest and lowest broad-sense heritability, respectively. Path coefficient analysis revealed that BM, HI, GP had positive direct effects on GY. Calculation of five different selection indices based on optimum and base indices indicated that selection for BM, HI and GP using genotypic path coefficients and their heritability as economic values would be a suitable selection criterion for improving population. Moreover, this study showed that both optimum and base indices show the same genetic progress for the studied traits. Since evaluation of base index, is much easier than the optimum index, it is highly recommended.


M. Sabokdast , F. Khyalparast,
Volume 11, Issue 42 (1-2008)
Abstract

  This research was conducted in order to determine the relationship between grain yield and yield components, using 30 common bean varieties in a randomized complete block design with four replications at the Agricultural filed faculty of Agriculture,Tehran university In this study 18 traits were assessed on 10 random plants from each plot. The result showed that there were significant differences among varieties in terms of trait under study, indicating the existence of genetic variation among varieties. Also results showed that the grain yield had a positive and significant genotypic correlation with number of seed/pod, pod weight, number of pod/plant, biological yield, days to flowering and maturity. Stepwise regression analysis showed that the maximum variation in grain yield could be attributed to the number pod/plant, number seed/plant, 100 seed weight and pod length. The results of path analysis showed that the highest direct effect, being positive, was related to number seed/plant and the lowest direct effect, which was related to number pod/plant. Factor analysis resulted in three factors that accounted for 78/7% of total variation. The first factor accounted for 38.39% of total variation and was designated as yield and yield component factor. This factor is comprised of pod weight, biological yield, grain yield and number of pod/plant traits.


B. Heidar, G.h. Saeidi, B.e. Sayed-Tabatabaei,
Volume 11, Issue 42 (1-2008)
Abstract

  In this study, factor analysis was conducted to determine the factors which contributed to the variation of quantitative traits and path analysis was performed to find the direct and indirect effects of yield components on grain yield in bread wheat. A doubled haploid population of 157 lines of wheat (Triticum aestivum L.) was evaluated for agronomic and morphological traits, using a randomized complete block design with three replications in 2003 and 2004. The results of factor analysis based on maximum likelihood indicated five factors explaining 80.4% and 73.9% of total variation in 2003 and 2004, respectively. The first factor in 2003 had 30.5% contribution to the total variation, strongly influenced by the traits of pollination date, heading date, flag leaf length and days to maturity. This factor also indicated the negative relationship among the yield components and the importance of relationship between grain yield and some morphological traits. The first factor in 2004 was more affected by grain weight/spike, grains/spike and 1000-grain weight, thus it was named as grain yield factor. The second and third factors in 2003 were considered as plant height and grain yield and in 2004 as maturity and plant height, respectively. The results of path analysis showed that grains/spike had the most direct and positive effects on grain yield in 2003 (1.33) and 2004 (0.87). Because of the negative and high indirect effects of grains/spike via fertile spikes/m2 and 1000-grains weight on grain yield, the correlation coefficient between grain yield and grains/spike was very low. There was not much difference between the phenotypic and genetic direct effects of spike/m2 on grain yield, indicating that their relationship was less affected by environmental conditions. In general, the results showed that grains/spike and spikes/m2 can be more efficient compared to 1000- grains weight for increasing grain yield and can be used as selection indices in breeding programs. Also, according to the results of factor analysis, selection based on the fourth factor including biological yield, spike/m2 and grain yield as selection index can be effective to improve grain yield in breeding programs.


H. Zali, S.h. Sabaghpour, E. Farshadfar, P. Pezeshkpour, M. Safikhani, R. Sarparast, A. Hashem Beygi,
Volume 11, Issue 42 (1-2008)
Abstract

  Presence of genotype × environment interaction necessitates evaluation of genotypes in a wide range of environments to find desirable genotypes. This study was carried out to determine the stability and adaptability of grain yield of 17 chickpea genotypes, in RCBD with four replications at Kermanshah, Lorestan, Ilam, Gachsaran and Gorgan Research Stations during two seasons (2003-2004). The genotype × environment interaction effect analyzed using the additive main effects and multiplicative interaction (AMMI) statistical model was significant at 1% level of probability. The sum of squares of G × E interaction was partitioned by AMMI model into four significant interaction principal component axes (IPCA). The first four principal component axes (IPCA 1, 2, 3 and 4) cumulatively contributed to 94% of total genotype by environment interaction. A biplot generated using genotypic and environmental scores of the first two AMMI components also showed that genotypes FLIP 97- 79, X95TH1 and FLIP 97- 114 were selected as stable genotypes, among which the genotype FLIP 97- 114 was outstanding for high yield stability.


M. Vafakhah, G.h. Shojaei,
Volume 11, Issue 42 (1-2008)
Abstract

  Continuous measurement of river discharge is a hard and expensive task in hydrology. To overcome this problem, the stage readings at hydrometric gauges are permanently taken and the discharge of any time at which the actual discharge is unavailable will be estimated through a relationship between discharge and stage. To study the stage-discharge relations and the capability of long-term data in establishing a permanent stage-discharge relationship, and also to determine the best time to measure the discharge of rivers, a study was conducted at the hydrometric station of the Zayandehrud regulatory dam using data from 1990 to 2003. The data were analyzed using simple regression analysis, the percentage of relative error and factor analysis. The results indicated that the best model to show the stage-discharge relation at the studied station is a power function model. Moreover, the model used for every year can only be used for that year. The results also showed that the most suitable times for the measurement of discharge are July, December and March.


A. Baghizadeh , A. Talei, M.r. Naghavi, M. Haji Rezaei,
Volume 12, Issue 43 (4-2008)
Abstract

In order to estimate the number and inheritance of controlling genes for grain yield and some of the related traits in barley, Afzal and Radical varieties along with their F1, F2 and F3 generations were planted in a randomized complete block design with three replications. Head weight, head length, number of heads, number of spikelets, awn length, hundred grain weight, grains per head, straw yield per head , harvest index and grain yield in different generations were recorded. Analysis of variance indicated that mean squares of generations were statistically significant for all the traits. Then, generation mean analysis was performed for all the traits. Based on the results, additive and dominance effects played roles in controlling awn length. For the other traits besides the aforesaid effects, epistasis effect was also significant. Also, results indicated that dominance variance had the most important role in controlling the inheritance for traits. The average broad sense heritability for all the traits was estimated between %69 - %89. The number of genes for all traits was estimated to be between one and six.
M. Tousi Mojarrad, M.r. Ghannadha,
Volume 12, Issue 43 (4-2008)
Abstract

In order to study inheritance of traits (Height, Peduncle length, Extrusion peduncle length, Diameter first internode, Diameter secondary internode, Diameter third internode length of secondary internode, length of third internode) associated with height in bread wheat, seven cultivars of bread wheat with their F1 progenies produced through a half diallel mating design were planted in a randomized complete block design with 3 replications in normal and drought conditions in the Seed and Plant Improvement Institute, Karaj, in 2004. Analysis of variance showed significant differences for all the traits in normal and drought conditions at 1 % probability level. Diallel analysis showed that general combining abilities were significant for all the traits in normal and drought conditions at 1% level of probability. The specific combining abilities were not significant except for extrusion peduncle length and length of secondary internode. Additive effect was more important in controlling all the traits. Height had the most broad sense and narrow sense heritabilities in normal and drought conditions. It was also found that increasing all the traits except for plant height and length of the third internode was controlled by the dominance alleles in normal and drought condition. The analysis of traits revealed more mean traits in progenies compared to parents in both normal and drought conditions. Sardary and Roshan varities showed the best general combining ability in normal and drought conditions.
A.m. Amini, A. Zeynal Hamadani, M. Ramazani,
Volume 12, Issue 43 (4-2008)
Abstract

The general goal of this research was to study the most effective Intra-Organizational factors in the success of the poultry-farm cooperatives in Tehran province. To this end, viewpoints of 151 managers and members of agricultural cooperatives were collected and studied. Survey study was performed to evaluate the effects of four major parameters including member awareness of the principles and philosophy, training programs of members, participation in cooperatives' affairs, and expertise and ability of managers on the success index of poultry cooperatives. The results showed that the degree of members' share of training and knowledge of cooperatives' principles was very low also participation in cooperative's affairs and the managers' expertise and skills were medium. Using multivariate regression analysis, the above-mentioned four factors showed significant effects on the success of the poultry cooperatives with coefficients of 1.87, 0.46, 0.57 and 1.04, respectively.
J. Abbas Palangi, A. M. Akhond Ali,
Volume 12, Issue 44 (7-2008)
Abstract

For an appropriate drip irrigation system design, a prediction of soil wetting pattern is needed for a given soil texture. The wetting pattern geometry is a key factor for emitter distance determination as well as crop type. The geometry of the wetting bulb is dependent on the parameters such as soil hydraulic properties, emitter discharge and the irrigation time. This study has been conducted in Albaji region in km 25 on the Ahvaz-Andimeshk road, in order to estimate the geometry of the wetting pattern under the point source trickle emitters in sandy soil with different discharge. The emitters were calibrated to provide 5, 10, 20, 30 and 40 liter per hour discharges. The maximum wetted soil surface and depth was measured by digging the irrigated soil. Two models were developed to predict wetted soil surface diameter and depth under a point source based on Buckingham's π theorem. The equations were calibrated by using the measured data. Then resulted scientific-empirical equations have been evaluated. Considering the maximum relative error of 14.3% and root mean square error of 3.8cm in estimation of the wetted soil surface diameter and depth, the models are recommended to estimate the geometry of the wetting bulbs with a high degree of accuracy, and can be used in designing and appropriate drip irrigation system management
F. Amiri, J. Khajeddin, K. Mokhtari ,
Volume 12, Issue 44 (7-2008)
Abstract

Ordination is the part of statistical ecology which has developed and integrated in recent years. Finding environmental factors which important in ecological structure determination of plant species is the final purpose of ordination. Ordination method was used for finding the effect of important variables on Bromus tomentellus species quantitative and qualitative changes in Esfahan's Fereidan region. For this purpose, fifteen sites were studied. Density, Cover percentage and Soil factors containing EC, pH, % caco3 , % gravel and stone, % clay, % silt, % sand, Na+, Ca2+, K+, Mg2+, Cl-, SAR, C/N and % OC. In A (0-30 cm) and B (30-60 cm) horizons over a line transaction in each site, were measured. The matrix of environmental and species characteristics were prepared. The relationship between environmental and species characteristics were determined using of PC-ORD and CANOCO software's and Redundancy Detrended Analysis (RDA) method. The results show that there are meaningful correlation between Density and Cover percentage with soil factors. The results implicate that C/N factor in A horizon and SAR in B horizon have the most effect on Bromus tomentellus density and cover percentage. EC, pH and …. Factors don't have much effect on Bromus tomentellus species characteristics.
L. Yaghmaie, S. Soltani, M. Khodagholi,
Volume 12, Issue 44 (7-2008)
Abstract

In order to determine the effect of climatic factors on distribution of Artemisia aucheri and Artemisia sieberi in Isfahan province, thirty nine most important climatic elements in ecological condition of these species were selected. Using a factor analysis method, the most important factors in distribution of these species were determined. These factors which cover 92.3% of the total variance of spatial variation of the species include rainfall, temperature and shining with 41.91, 40.18 and 10.23 percent, respectively. Four most important vegetative types of Artemisia aucheri and Artemisia sieberi in Isfahan province are as follows: 1-Artemisia aucheri and Astragalus,2- Artemisia sieberi,3-Artemisia sieberi as a dominant species, and 4-Artemisia sieberi as a subdominant species. Then the effects of climatic factors on distribution of these species and the average elevation of distribution of these species were determined. The effect of factor analysis on these types shows that rainfall and temperature are the most influential factors in spatial distribution of Artemisia aucheri and Artemisia sieberi in Isfahan province, respectively. In general, Artemisia sieberi has a higher extended tolerance range than Artemisia aucheri, and could be mentioned as a nearly universal species.
H. Mehrabi Basharabadi,
Volume 12, Issue 44 (7-2008)
Abstract

Kerman province is the largest producer of greenhouse cucumber and tomato in Iran. This paper calculates the interest rate of return (IRR) and return period of investment (RPI) in vegetable, cut flowers and strawberry in greenhouse and compares them with vegetable grown outdoors. To do the study, a random sample of 309 farmers was selected in the province of Kerman in 2005. Results showed that IRR for vegetable, cut flowers and strawberry in greenhouse was about 20, 14 and 23 respectively, and it was 45/8 percentage per year for vegetable outdoors. RPI for vegetable, cut flowers and strawberry in greenhouse was about 8, 29, and 7 years, respectively. Vegetables Production under greenhouse produces more employment opportunities, has better yields, higher price and efficient use of factors, but it has lower IRR, higher production cost, higher pesticide residue and is more capital intensive in comparison with outdoor production. Improvement of greenhouse credits, enlargement of metal greenhouses, research on yield and development of greenhouses at region 5 are the important policy-making implications of this paper.
H. Sabouri, A.m. Rezai, A. Moumeni,
Volume 12, Issue 45 (10-2008)
Abstract

In order to study the genetic diversity of 75 Iranian rice genotypes (45 Iranian land race, 25 improved cultivars, and 5 exotic cultivars) with respect to their salinity tolerance at seedling stage and to determine tolerance indices, based on biomass, genotypic code and Na+/K+ ratio a factorial experiment in randomized complete block design with three replications was conducted under control and salt stress(1.2, 4 and 8 dSm-1) conditions at Rasht Rice Research Institute. Root and shoot length, root and shoot dry weight, Na+ and K+ concentrations, and genetic score were studied. Significant differences were detected among genotypes for all traits. Shoot length and K+ concentration had the highest and lowest heritability estimates, respectively. Genetic score under salinity stress showed that Tarom-mahalli, Gharib, Shahpasand Mazandaran and Ahlami-Tarom with more biological yield root and shoot lenghes, and low Na+/K+ ratio were tolerant. Khazar, Speedroud, IR28 and IR29 were the most sensitive cultivars. Tarommahalli, Ahlamitarom, Rashti and Chparsar had low tolerance index, mean productivity, stress sensitive index, geometric mean index, stress tolerance index and harmonic mean for genetic score, whereas Khazar and Speedroud had high values for theses indices. Cluster analysis, based on seedling traits at 4 and 8 dS.m-1 divided the genotypes to three groups. Tolerante group had low genetic score and Na+/K+ ratio, but high root and shoot dry weight, biomass, root and shoot length.
M. Ramazani, H.a. Samizadeh Lahiji, H. Ebrahimi Koulabi, A. Kafi Ghasemi,
Volume 12, Issue 45 (10-2008)
Abstract

In order to study agronomic and morphological traits in maize hybrids in Hammedan, two early (108 and 301), three medium (604, 647 and TWC647) and two late maturing (704 and 711) hybrids were evaluated in a randomized complete block design with three replications in Agricultural and Natural Resources Research Station in Hammedan in 2005. 33 morphological and phonological traits were recorded from 10 plants randomly selected from two central rows of each plot. The maximum and minimum grain yield was obtained from SC647 and SC301, respectively. The grain yield had the highest correlation with dehusked ear weight. Factor analysis of data after varimax rotation identified four factors that accounted for 98.03% of total variance. The scatter plot of hybrids based on the two first factors (the seed yield factor and phenological structure factor) showed that SC704 had the maximum forage yield and the best physiological characteristics and SC647 had the maximum grain yield, cob diameter and number of seed in row.

Page 3 from 8     

© 2024 CC BY-NC 4.0 | JWSS - Isfahan University of Technology

Designed & Developed by : Yektaweb