Showing 31 results for Fertilizer
M. Shamsalddin Saied, A. Ghanbari, M. Ramroudi, A. Khezri,
Volume 21, Issue 1 (6-2017)
Abstract
Cover crops, conservation tillage systems and organic fertilizers have played an important role in maintaining or enhancing soil quality. In order to assess the combined effects of these techniques on soil quality an experiment was conducted as split Plot experiment based on randomized complete block design with three replications at Shahid Bahonar University of Kerman in 2011-2012.
The method of return of cover crops to soil included reduced tillage (disc) and no-till (herbicide glyphosate + cutting) as the main factor and manure application management included cover crops (wheat, canola and peas) without the use of urea, cover crops with a consumption of 25 t/ha of manure, Cover crop with 75 kg of urea and fallow treatments (without cover crop) as subplots. The results showed that the highest concentration of nutrients (except N and P concentrations in the plant), the nutrient yield and biomass of cover crops belonged to wheat treated with urea fertilizer. Soil properties such as bulk density, pH, organic matter and soil nutrient concentrations (nitrogen, phosphorus and potassium) were significantly affected by fertilizer management and the method of return of cover crops to soil (except pH) and soil organic matter content and nutrient concentration were affected by their interactions. In wheat cover crop treatments with urea with %27.53 reduction in bulk density, %20.88 increase in the porosity, organic matter 2.4 times and nitrogen 1.5 times compared to the fallow treatment was the best treatment that wasn’t significantly different from the wheat treated with manure in low- tillage system. Wheat treated by manure had the highest phosphorus that was 3.5 times of the phosphorus concentration in the fallow treatment. So, in order to develop sustainable agriculture, reducing the use of synthetic fertilizers and environmental protection, the wheat cover crop treatments with manure and low- tillage cropping systems would be appropriate in Kerman.
A. Ghasemi, A. Ghanbari, B. A. Fakheri, H. Fanaie,
Volume 21, Issue 3 (11-2017)
Abstract
In line with sustainable agriculture development, an experiment was conducted including tillage as the main factor in two conventional systems (plowing and mixing fertilizer with soil) and no tillage (leaving residuals of green manure and direct corn sowing). The fertilizer resources were T0: control, T1: barley green manure without chemical and manure fertilizers, T2: barley green manure with full use of the recommended chemical fertilizer (NPK) to barley containing urea, super triple phosphate and potassium sulphate respectively as 165, 90, and 75 kg/ ha, T3: green manure with two -third residual of chemical fertilizer for barley and a third of the residual to corn, T4: green manure with one- third chemical fertilizer for barley and two-third for corn, T5: barley green manure mixed with 50% manure and 50% chemical fertilizer, and T6: green manure with 40 tons of manure used as a sub-plot in the split plot and in completely random blocks with three replications for two crop years ( 2013-2014) at the Agricultural Research Station, Sistan. The results showed that in comparison with no-tillage, the conventional tillage resulted in a significant increase in grain yield, the contents of nitrogen, phosphorus, potassium and soil organic carbon, bulk density and moisture content of the soil decreased in the conventional tillage. Sources of fertilizer (organic and chemical fertilizers) significantly increased soil organic carbon, nitrogen, phosphorus, potassium, and soil moisture content. The pH and soil bulk density factors decreased after using manure sources. Interaction tillage in the fertilizer sources showed that in the conventional tillage and Treatment T5 (mixture of manure, green and chemical fertilizers) the highest yield of corn was obtained with an average of 8471 kg/ha. The results of this experiment reported that using conventional tillage system with mixture of 50% manure, green and chemical fertilizers can increase corn grain yield, provide the dynamics of nitrogen, phosphorus, potassium, organic carbon, and improve soil bulk density and soil pH.
R. Amirnia, J. Jalilian, E. Gholinezhad, S. Abaszadeh,
Volume 21, Issue 4 (2-2018)
Abstract
To evaluate the effect of supplemental irrigation and seed priming on yield and some quantity and quality characteristics of vetch (Vicia dasycarpa) rainfed maragheh cultivar, an experiment was carried out at the Research Farm of Faculty of Agriculture, University of Urmia, West Azarbaijan province, Iran, during 2011. The experiment was laid out using split-plot, based on Randomized Complete Block design in three replicates. The factors studied were: Supplemental irrigation at four levels: without supplemental irrigation (I1), 1 time of supplemental irrigation (I2), 2 times of supplemental irrigation (I3) and 3 times of supplemental irrigation (I3). The subplot included four levels of seed priming: Control (C), Water (W), Phosphate (P) and Nitroxin (N). Plant height, pod number in stems, 1000-grain weight, wet and dry forage yield in the second and third harvest and fiber percentage in the second and third harvest, protein yield in the second and third harvest, biological yield and harvest index were influenced by the supplemental irrigation. Wet and dry forage yield in the second harvest and wet forage yield in the third harvest were highest in I4 with respectively 14.5, 16.72 and 3.56 (tons/hectare) yield and lowest with respectively 7.73, 7.47 and 2.06 (tons/hectare) yield. As a result, applying 2 times of supplemental irrigation and seed treatment with phosphate and nitroxin had positive effects on quality and quantity yield of vetch and they could improve the quantity and quality of Vetch forage.
A. Koochekzadeh, H. Hoveizeh, A. R. Yazdipour,
Volume 22, Issue 4 (3-2019)
Abstract
Since 2001, water main drainage of sugarcane farms located in the east side of Karoon River has been deviated to Shadegan lagoon. The average discharge and salinity of the drain water in spring and summer were 20 and 20.5 m3 sec-1 and 17.1 and 13.3 dS m-1, respectively. Therefore, there have been considerable changes in the lagoon water quality when compared to the time before entering the drain water. Therefore, an experiment was performed to investigate the effects of sugarcane waste water on the quality of Lagoon’s water. The results showed that the average salinity was increased significantly before and after the entrance of the drainage into different points. The average salinity in the sample point No.2 (along the entrance of the drainage) in summer was changed from 17.7 to 51.5 dS m-1. The results, therefore, revealed that after the entrance of drainage water to Lagoon, during summer time, water salinity and mineral concentrations were increased for all locations except the points of 1 (on the northern margin of Lagoon) and 3 (influenced by Jarahi River). Phosphate ion concentration was increased at all investigated locations, but the highest phosphate concentrations were observed at the location points of 1 and 2 in summer. Given the important role of this lagoon in the protection of animal and plant spices, it is essentially important for sugarcane production companies to adopt a special measure for the protection of Lagoon from any source of pollution.
M Rezaei Pasha, K Shahedi, Q. Vahabzadeh, A. Kavian, M. Ghajar Sepanlou, P. Jouquet,
Volume 23, Issue 2 (9-2019)
Abstract
One of the management practices to reduce the harmful effects of chemical fertilizers and to protect soil and water resources is applying a combination of organic and chemical fertilizers that can better than using them separately. Therefore, in order to understand and identify the effectiveness of this management practice, it is necessary to examine runoff and sediment production. This study was carried out in an agricultural sloping land located in the North of Iran, near Sari city. For this purpose, runoff measurement plots of 1 × 5 m were set up under natural rainfall based on a randomized block experimental design. Soil samples were measured at 0-10 and 10-20 cm depths. In this study, parameters such as runoff (volume, nitrate content, sediment yields), soil physical features (porosity and infiltration coefficient), and soil chemical properties (EC, OC, N, CEC, pH) were measured. The results showed that among soil chemical and physical properties, just N, EC and pH significantly influenced the Municipal Solid Waste Compost. A PCA was carried out, showing that these treatments explained 74.35% of the total variance of the results. Accordingly, it could be stated that using soil and water conservation management practices can rapidly significantly improve the soil properties in the sloping lands.
B. Raheli Namain, S. Mortazavi, A. Salman Mahini,
Volume 23, Issue 2 (9-2019)
Abstract
Agriculture production with high quality and adequate income for farmers and the least harmful effects in environment are the main objectives of agriculture optimization. The main objective of this study was ranking, optimization and land allocation of Gonbadkavoos’s Drylands for strategic products such as wheat, barley, oilseed rape and soybean under environment and socio-economic scenarios. Because the available information on fertilizer and pesticide consumption was not sufficient and reliable, this data was collected through face-to-face interviews with farmers. The results showed that some slightly and moderately hazardous pesticides were consumed in study area. In this study, the optimized combination of agriculture products was applied by using the modeling approach and considering environmental and socio-economic aspects in Gonbadkavoos County. This approach uses MCAT software, which is based on multi-criteria techniques and metaheuristic algorithms. The results of the environmental scenario show ed that barley, oilseed rape and soybean, with little difference, had the highest benefit-to-cost ratio and profitability, respectively. The slight difference could be related to the use of fertilizers and pesticides. In the socio-economic scenario, oilseed rape, wheat and barley had the highest benefit-to-cost ratio and land allocation, respectively. The represented approach using the decision support system (MCAT) can help planners to design optimal cropping systems and aid good management of fertilizers and water consumption.
A. Abdollahi, M. Norouzi Masir, M. Taghavi, A. Moezzi,
Volume 24, Issue 2 (7-2020)
Abstract
Nowadays, one of the ways to confront with the micronutrients deficiency is application of Nano materials to increase the availability of elements such as zinc for plants. Therefore, this study was conducted to investigate the effect of functionalized iron oxide nanoparticles and zinc sulfate chemical fertilizer on the zinc chemical forms in soil solution phase and its correlation with zinc concentrations and uptake in wheat. This study was carried out in a completely randomized design with three replications. Treatment consisted of functionalized iron oxide nanoparticles of Hydroxyl (OH), Carboxyl (COOH) and Amine (NH2), each at three levels (100, 200 and 300 mg.kg-1), ZnSO4 (40 kg.ha-1) and Control (without using iron oxide nanoparticles). At the end of the cultivation period, soil chemical properties such as pH, soil available zinc and dissolved organic carbon and concentrations and the uptake of zinc in plant were measured. The results showed that pH, available zinc and dissolved organic carbon content of soil solution were significantly affected by the treatments. The results obtained from the Visual MINTEQ Geochemical model showed that the highest amount of the free form of zinc (Zn2+) was obtained at the level of 300 mg.kg-1 of carboxyl iron oxide nanoparticles. Also, the experimental treatments significantly influenced the concentration of Zn-DOM species. The positive and significant correlation between Zn+2 and Zn- DOC species with the concentration and total Zn uptake of wheat indicated that these pools of Zn could be liable species in soil. The results of this study, therefore, showed that the application of functionalized iron oxide nanoparticles could help to improve soil conditions in order to increase the zinc availability for plants.
Sh. Zand-Parsa, F. Ghasemi Saadat Abadi, M. Mahbod, A. R. Sepaskhah,
Volume 24, Issue 2 (7-2020)
Abstract
Due to the limited water resources and growing population, food security and environmental protection have become a global problem. Increasing water productivity of agricultural products is one of the main solutions to cope with the difficulties. By optimizing applied water and nitrogen fertilizer, the pollution of groundwater could be deceased and the water productivity could be increased. The aim of this research was to determine the relationships between water productivity (IRWP) and water use efficiency (WUE) and different amounts of applied water (irrigation + rain fed) and nitrogen (applied and residual). This study was conducted on wheat (Triticum aestivum L., cv. Shiraz) in Shiraz University School of Agriculture, based on a split-plot design with three replications, in 2009-2010 and 2010-2011 periods. Irrigation treatments varied from zero to 120% of full irrigation depth, and nitrogen fertilizer treatments varied from zero to 138 kg ha-1 under basin irrigation system. The experimental data of the first and second years were used for the calibration and validation of the proposed relationships, respectively. The calibrated equations using the dimensionless ratios of irrigation depth plus rainfall, actual evapotranspiration and nitrogen fertilizer plus soil residual nitrogen to their amounts in full irrigation and maximum fertilizer amounts were appropriate for the estimation of water productivity and water use efficiency. The values of the determination coefficient (R2) for water productivity and water use efficiency (0.88 and 0.93, respectively), and the values of their normalized root mean square error (NRMSE) (0.2 and 0.13, respectively) showed a good accuracy for the estimation of IRWP and WUE.
M.m. Matinzadeh, J. Abedi Koupai, M. Shayannejad, A. Sadeghi-Lari , H. Nozari,
Volume 25, Issue 4 (3-2022)
Abstract
Using water and fertilizer management at the farm level can be increased water use efficiency and reduce the volume of drainage water, fertilizer losses, and other pollutants in farmland with deep underground drains such as Khuzestan agro-industrial Companies. In the present study, a comprehensive simulation model for the water cycle and the nitrogen dynamics modeling was used for water and fertilizer management modeling on farmland of sugarcane in Imam Agro-Industrial Company using a system dynamics approach. To reduce irrigation water consumption and nitrogen fertilizer losses, five different scenarios were considered including four scenarios of water management consist of 5, 10, 15, and 20 percent reduction in the amount of irrigation water (I1, I2, I3, and I4) compared to the current situation of irrigation in Imam agro-industrial Company (I0), and one scenario of integrated water and fertilizer management (20% reduction in the amount of irrigation water and urea fertilizer 210 Kg/ha, I4F). The results of modeling showed that the scenario of I4F caused to reduce 31, 70, 71, 70, and 85 percent of the cumulative volume of drainage water, cumulative nitrate and ammonium losses, total losses of cumulative nitrate, and ammonium by tile-drain and cumulative losses of denitrification process, respectively. Thus, the implementation of this scenario, not only saves water and fertilizer consumption but also reduces environmental pollution effectively. So the scenario of I4F (amount of irrigation water for six months 2656 mm and urea fertilizer 210 Kg/ha) is recommended for sugarcane in the Imam agro-industrial Company.
H. Jafarinia, A. Shabani, S. Safirzadeh, M.j Amiri,
Volume 27, Issue 2 (9-2023)
Abstract
Due to the climatic conditions of Iran, increasing water scarcity, and the effect of drought stress on the efficiency of irrigation water consumption and chemical fertilizers application, an experiment was conducted to investigate the effect of irrigation intervals (6, 9, and 12-day intervals), different levels of nitrogen fertilizer (200, 300, and 400 kg urea per hectare) and cultivation methods (on-ridge or heeling up and in-furrow) on yield and productivity of sugarcane as a factorial design based on randomized complete block design in 3 replications at Hakim Farabi Agro-Industry Company in Khuzestan province. The results showed that the maximum (106.73 tons/ha) and minimum (59.10 tons/ha) sugarcane yields were observed in 9-day and 12-day irrigation intervals, respectively. Also, the highest sugarcane yield (99.89 tons per hectare) was obtained in the treatment of 400 kg urea per hectare and the in-furrow planting method resulted in a higher yield compared to the on-ridge planting method. The highest water productivity in sugarcane stem yield and sugar production with 3.55 and 0.34 kg per cubic meter of applied water, respectively, was obtained in a 9-day irrigation interval. A significant increase in water use efficiency in sugarcane stem yield was observed in 400 kg urea/ha compared to the other two fertilizer levels. However, there was no significant difference in water productivity of sugar yield between different fertilizer treatments. The results showed that 6 and 9-day irrigation intervals in most of the studied traits were not significantly different. Therefore, using a 9-day irrigation interval is suggested in the studied area when the sugarcane cultivation area is high and the amount of available water is limited. In-furrow planting method can also be effective in reducing water consumption. Therefore, deficit irrigation and proper nitrogen fertilizer consumption can be very effective in sugarcane cultivation.
A.r. Tavakoli, M. Basirat,
Volume 27, Issue 2 (9-2023)
Abstract
Shifting of surface irrigation to drip system is key tool to reduce water saving. Due to the soil moisture profile variation of the drip irrigation; water distributed of the root zone is not uniform. Moreover, moisture deficit and inefficient fertilizing in drip system due to unavailability in deeper layers of soils is one of the disadvantages of drip system in pistachio orchards with depth root systems. An experiment was carried out by adjusted subsurface drip irrigation (SSDIadj) system in pistachio of Damghan region (Semnan province) in a randomized complete block design with split plot arrangement in three replications for three years. The potassium fertilizer amounts (Fertigation) at three levels (50, 70, and 100% of requirement) were considered as the main plot and the design of conductor tubes of the SSDIadj system in seven levels as sub plots. The irrigation guide tubes were arranged for sand tube irrigation in (control), 40-40-40-40, 40-40- 50-50, 40-40-60-60, 40-40-50-60, 40-40-50-70, and 40-40-50-80. Meteorological data from the nearest meteorological station was collected and analyzed. Yield, water consumption, irrigation water productivity index and growth conditions of ShahPasand pistachio cultivar were determined in different treatments. Data were analyzed using Genstat-12 software and based on the analysis of surplus costs and aerial data, the best treatment including combination of potassium fertilizer and arranged tubes of SSDIadj system was determined. The recommended treatments are including of full irrigation, full potassium fertilizer and guide tubes 40-40-50-70 and or 40-40-50-80. The treatments with stratified conductive tubes in the optimal distribution of water, improving productivity and reducing inefficient consumption water. In addition, there are no restrictions on subsurface irrigation such as root accumulation, root penetration into pores of drippers and as well as accumulation of salts.
