Showing 401 results for Ag
S. Dehghani, M. Naderi Khorasgani, A. Karimi,
Volume 26, Issue 3 (12-2022)
Abstract
Knowledge of the distribution of heavy metal concentrations in different components of soil particles is significant to assess the risk of heavy metals. The objective of this study was to evaluate some pollution indices and spatial variations in their estimation in different components of soil particle size fractions (<2000 and> 63 μm) in the Baghan watershed in the southeast of Bushehr province with an area of about 929 square kilometers. The location of 120 surficial composite soil samples (0-20 cm) was determined by using the Latin hypercube method. Soil pollution was assessed using geochemical indices of contamination factor (CF) and pollution load index (PLI). The kriging method was used in the Arc GIS software to interpolate the spatial variations of CF and PLI. Based on the results, the CF displayed the particles in the size < 2000 microns compared to all metals in moderate pollution conditions (1≤CF <3) and with the fineness of soil particles (particles with a diameter <63 microns) concerning to Cd metal shows significant contamination status and moderate pollution with other metals, respectively. CFZn, CFCu, and CFFe in particle size <2000 microns and CFPb in finer class were fitted with a spherical model and other metal contamination coefficients with an exponential model. CFCd and CFFe have the highest impact ranges at <2000 and < 63 microns, respectively. The results of this research confirm that corrective operation is needed to monitor cadmium status in the studied area.
E. Masoumi, R. Ajalloeian, A.a. Nourbakhsh, M. Bayat,
Volume 26, Issue 3 (12-2022)
Abstract
Since clay is widely used in most construction projects, the issue of improving clay soils has considerable importance. This study aimed to optimize the variables affecting the properties of geopolymer and improve their mechanical properties using Isfahan blast furnace slag. Taguchi's statistical design method was used to model three process variables (blast furnace slag, water, and alkali sodium hydroxide agent) with four different values in the mixing design. Geopolymer was used to optimize the uniaxial compressive strength. Sixteen geopolymer compositions determined by mini-tab software were prepared and their uniaxial compressive strength was measured. The obtained results were modeled by analysis of variance, and then the interactions of the three variables on the uniaxial compressive strength of geopolymer were investigated using two and 3D diagrams. Then, the variables were optimized and the proposed values for the optimal sample were examined at temperatures of 25, 50, and 70°C and at times of 3, 7, 14, and 28 days of operation. A comparison of the results predicted by the models and the results of the experiments confirmed the validity of the models. Also, the scanning electron microscopy (SEM) images showed that the porosity will reduce from 7 to 28 days. It indicated that the use of the geopolymerization method has a significant role in stabilizing weak clay soils with low plasticity. The effect of fibers and geopolymer to reinforce was also investigated and for better evaluation, it was compared with soil stabilization with Portland cement. The results showed that in the most optimal geopolymer composition, the bearing resistance of clay has increased by more than 3400%. Meanwhile, fibers along with geopolymer with optimal percentage and length (0.1% by weight of geopolymer composition and length of 12 mm) were able to increase the uniaxial compressive strength of clay by nearly 4000%, which shows the excellent effect of using cellular fibers parameter whit the geopolymer in this research.
H. Babajafari, Sh. Paimozd, M. Moghaddasi, M. Hosseini Vardanjani,
Volume 26, Issue 3 (12-2022)
Abstract
Drought is one of the most complex natural disasters due to its slow onset and long-term impact. Today, the use of remote sensing techniques and satellite imagery has been considered a useful tool for monitoring agricultural drought. The objective of the present study was to evaluate spatial and temporal monitoring of agricultural drought in the lake Urmia catchment area with the ETDI drought index which is calculated from Nova satellite images based on actual evapotranspiration from the SEBS algorithm and compared with the ground index SPI. For this purpose, 248 AVHRR sensor images and NOAA satellites during the statistical period of 1998-2000 and 17 meteorological stations with a statistical period of 30 years were used to calculate the indicators. To determine agricultural lands, six thousand points were marked for different uses and their actual evapotranspiration was calculated using the SEBS algorithm. The results showed that with the onset of the drought period in 1998, the ETDI index indicated 9.4% in weak drought conditions in May and 90.6% in normal conditions. Over time, in June of 1998, the situation was different with 95% in a weak drought situation and 5% in a normal situation for the city of Tabriz. In July, the entire catchment area experiences a slight drought. Then, in August, 84% of the basin is in normal condition and 16% in Tabriz and Urmia are declared weak drought. It was also founded that the ETDI drought index due to the combination of visible and infrared bands and its combination with terrestrial data has a physical meaning and has high certainty and predicts drought faster and more accurately.
M. Hayatzadeh, M. Eshghizadeh, V. ,
Volume 26, Issue 4 (3-2023)
Abstract
The land use change as well as changes in climatic parameters such as temperature increase affect many natural processes such as soil erosion and sediment production, floods, and degradation of physical and chemical properties of soil. Therefore, it is necessary to pay attention to different aspects of the effect of these changes in studies and macro decisions of the country. In the present study, the SWAT conceptual model was used to test and analyze the existing scenarios in the Marvast basin. After calibrating the model, the two scenarios were tested. The first scenario is in the field of agricultural management and conversion of gardens to agricultural lands and the second scenario is a 0.5-degree increase in temperature by assuming other conditions are constant. The calibration and validation results of the model with the Nash-Sutcliffe test showed 0.66 and 0.68 respectively, which indicate the acceptable performance of the model in the study area. Then, the results of using two scenarios of land use change and heating, especially in recent years showed the effect of 30 percent of the climate scenario on the increase of flooding in the basin. The scenario of changing the use of garden lands to agriculture in two cases of 20% and 50% change of use of 10% and 12% was added to the flooding of the basin. The results indicate that in similar areas of the study area which is located in a dry climate zone, a possible increase in temperature can have a significant effect on flooding in the basin. However, the indirect impact of the human factor in increasing greenhouse gases and flooding in the basin should not be ignored.
N. Moradian Paik, S. Jafari,
Volume 26, Issue 4 (3-2023)
Abstract
Changes in land quality factors were investigated according to the change in land use of two conventional cropping systems in Khuzestan (Dimcheh region, periodic cultivation system, sugarcane, forest, and deforesting in Zaras region). The results showed that by the change of forest land use, organic carbon from 0.93 to 0.55%, cation exchange capacity (CEC) from 19.6 to 13.3 cmol/kg, C/N from 7.4 to 3.8%, the mean weight diameter of aggregate (MWD) from 1.7 to 1.3%, and microbial respiration from 0.11 to 0.06 mg of CO2 /gr of soil per day decreased and in contrast, the dispersible clay from 4.6 to 19.3% increased. PCA analysis for the parameters showed that five factors justified more than 90% of the variance in the values of FC, PWP, AW, and AF. In the Dimcheh region, the average volumetric moisture content of FC from 31.3% to 27.3%, available water from 12.9% to 9.8%, dispersible clay from 56.1% to 12.3%, and bulk density reduced from 1.6 to 1.4%, organic carbon from 0.45 to 0.78%, C/N from 6.3 to 10.0%, microbial respiration from 0.01 to 0.04 mg of CO2 /gr soil per day and MWD of aggregates increased from 0.77 to 1.3 mm. Five factors including FC, AW, BD, DC, and OM explained more than 90% of the variance.
Z. Nazari, M. Moeinaddini, S. Zare, R. Rafiee,
Volume 27, Issue 1 (5-2023)
Abstract
Due to the environmental problems caused by wind erosion, it is necessary to stabilize the dust centers with mulches. The objective of the present study was to determine and compare the optimum vinasse mulches based on mechanical indicators for sensitive soil stabilization to wind erosion. In this research, vinasse (0, 100, 200 g) is combined with bagasse (0, 25, 50 g), ash bagasse (0, 25, 50 g), filtercake (0, 12.5, 25 g), and one-liter water (81 treatments). At first, the treatments were determined in the appropriate range of salinity and acidity (35 treatments) and in the next step, the mechanical indicators have been measured after mulching on laboratory trays (2×30×100 cm). Optimum mulches have been determined based on five indicators by mean comparison (Duncan). The mean comparison showed that treatments 33, 30, 34, 32, and 19 show the mean difference between the groups based on layer thickness, impact resistance, compressive strength, and shear strength properly. It can be concluded that vinasse (100 and 200 g) with 50 g bagasse reduces the crack coefficient greatly, and the application of vinasse, bagasse, and filtercake does not affect the compressive strength and impact resistance.
R. Mousavai, M. Rasouli Sadaghiani, E. Sepehr, M. Barin,
Volume 27, Issue 1 (5-2023)
Abstract
can provide useful information about P adsorption and the factors affecting it. A batch experiment was performed with phosphorus concentrations (0 to 35 mg/L) in two soils with different electrical conductivity (EC) (2 and 15 dSm-1) by a variety of biochar treatments including simple apple-grape biochar (BC), rock phosphate- biochar (BC-RP), enriched-biochar (BC-H3PO4-RP), enriched-biochar (BC-HCl-RP), triple superphosphate (TSP), and control (Cont). The results indicated that phosphorus sorption capacity varied between the soils. Biochar treatments were effective in reducing the phosphorus adsorption of both soils. Due to BC-H3PO4-RP and BC-HCl-RP treatments, the maximum phosphorus adsorption of soils decreased in S1 soil by 14 and 23 % and in S2 soil by 26 and 19%, respectively. Also, the use of these treatments decreased the parameters of Langmuir absorption intensity (KL) of S1 soil to 0.085 and 0.066, respectively and S2 soil to 0.11 and 0.15, L/mg respectively, and Freundlich absorption capacity (KF) of S1 soil decreased to 19.2 and 22.5 and S2 soil to 28.2 and 28.1 L/kg, respectively. Enriched biochars significantly reduced the buffering indices of both soils indicating phosphorus adsorption decreased and increased the availability of phosphorus for the plant. The standard phosphorus requirement of S2 soil was lower than S1 soil by both equations. Therefore, enriched biochar can be an effective strategy to increase phosphorus availability and reduce the use of chemical fertilizers in saline and non-saline conditions; however, more field studies are needed for a clear understanding of the potential of P-enriched biochar as a fertilizer alternative.
H. Siasar, A. Salari,
Volume 27, Issue 1 (5-2023)
Abstract
Access to large precipitation data with appropriate accuracy can play an effective role in irrigation planning and water resources management. Satellite images generate high, wide, cheap, and up-to-date data is a good way to estimate precipitation. In this research, the Google Earth engine system and precipitation products from satellite images of PERSIANN and CHIRPS models in daily, monthly, and annual time intervals were used to evaluate and validate the amount of precipitation in Bandar Abbas station during the statistical period of 1983-2020. The results showed that the precipitation estimation by PERSIANN and CHIRPS satellites on a monthly and annual scale is more accurate than the daily scale. The highest correlation coefficient and the least RMSE belonged to the PERSIANN algorithm on monthly and annual scales. The value of the correlation coefficient in the PERSIANN algorithm on daily, monthly, and annual scales is equal to 0.32, 0.83, and 0.94, respectively. The correlation coefficient in the CHIRPS algorithm in daily, monthly, and annual scales is equal to 0.24, 0.71, and 0.90, respectively. The coefficient of determination (R2) of PERSIANN and Chrips algorithms on a monthly scale were 0.89 and 0.70, respectively, and for an annual scale were 0.88 and 0.80, respectively. The general conclusion of this study indicated that the accuracy of the two algorithms in determining the spatial pattern of rainfall on a monthly and annual scale is appropriate, and the PERSIANN algorithm had a higher accuracy on a monthly time scale.
M. Ghorbanian, D.r A.m. Liaghat, M. Fasihi Harandi,
Volume 27, Issue 1 (5-2023)
Abstract
Many of the social and security issues of the Zayandeh-Rud basin are the result of the government becoming the sole agent of governance and the gaps in the command-control governance structure. It is clear that the main issue to achieve participatory governance is the gap in stakeholder relations and the lack of a coherent and flexible agenda to improve these relations. Therefore, the objective of this study was to provide solutions for improving relationships as a starting point and key to reforming the governance structure. The management and transition framework (MTF) was used to analyze the stakeholders and the relationships between them that showed the concentration of tension in the relationship between Isfahan farmers and the Ministry of Energy (Isfahan Regional Water Company). Also, using the MTF database and the participatory model building (PMB) based on interviews with key Stakeholders, the causes, solutions, consequences, and obstacles to improve these relationships were extracted in the form of causal circles. Finally, by focusing on the solutions, the conceptual model of improving the relations between the Stakeholders and the solutions presented by the interviewees, including holding local elections and convening the Zayandeh-Rud Basin water assembly, mediation with interdisciplinary knowledge approach, participatory management working groups, the formation and strengthening of the economic committee improve the livelihood of farmers, the holding of government meetings with farmers and industries were reviewed.
F. Meskini-Vishkaee, A. Tafteh, M. Goosheh,
Volume 27, Issue 1 (5-2023)
Abstract
Salinity and water scarcity are limiting factors for sustainable agricultural production. The cultivation of resistant plants to environmental stresses is one of the important management factors for sustainable production. The objective of this study was to determine the water requirement and plant response coefficients to water deficit stress (Ky) in different growth stages under the Khuzestan province climate. This study was performed on the quinoa cultivar Titicaca in Ahvaz City in 2019 in a randomized complete block design with 13 treatments and three replications. Treatments include full irrigation and application of three levels of water deficit stress (30, 50, and 70% of allowable soil moisture depletion) at four different stages of plant growth. The duration of the initial, developmental, middle, and late growth stages of quinoa was 24, 28, 32, and 18 days, respectively (total growth period=102 days). The highest quinoa yield was obtained in full irrigation treatment (3700 kg ha-1) with a water requirement of 312 mm. Plant response coefficient to water deficit stress in the initial, developmental, middle, and late stages were 0.8, 0.65, 0.74, and 0.47, respectively. Although quinoa is a drought-resistance plant, it should be noted that the water stress in the two initial and middle stages (quinoa sensitive growth stages to water stress) reduces the quinoa yield significantly that should be considered in the planning of deficit irrigation.
S. Salehi, A. Mahmoodi Moghadam,
Volume 27, Issue 2 (9-2023)
Abstract
The present study investigated the related parameters to decrease the seepage through homogenous and heterogeneous earth dams by employing experimental models and solutions. Two heterogeneous earth dam models with vertical clay cores were considered to illustrate the effect of the electrokinetic application on the time failure factor. The seepage lines were measured along the longitudinal section from the heel to the toe using the observation wells by adjusting the electrodes of the electrokinetic application through the vertical clay core. The initial comparison expounds that adjusting the electrokinetic approach can decrease the level of the seepage line due to depleting water by considering horizontal drainage. Furthermore, the failure time was increased by 18 percent due to inputting the voltage in the clay content. The results indicated that the models with an electrokinetic approach were stabilized more than the ones. The hydrographs of the flow discharge were measured along the experimental tests to investigate the effect of electrokinetics with and without electrodes in 10 and 20 clay percent of the dam soil content. Results indicated that employing the electrokinetic application due to increasing clay content caused the effect of the electrokinetic was significantly increased and it caused the discharge flow reduced of 32 percent.
Y. Esmaeli, F. Yosefvand, S. Shabanlou, M.a. Izadbakhsh,
Volume 27, Issue 2 (9-2023)
Abstract
The objective of the current study was to zone flood probability in the Marzdaran watershed. Since the allocated budget for management work is limited and it is not possible to carry out operations in the whole area, having a map that has prioritized different areas in terms of the probability of flood occurrence will be very useful and necessary. A well-known data mining model namely MaxEnt (ME) is applied due to its robust computational algorithm. Flood inventories are gathered through several field surveys using local information and available organizational resources, and the corresponding map is created in the geographic information system. The twelve predisposing variables are selected and the corresponding maps are generated in the geographic information system by reviewing several studies. The area under the curve (ROC) is used to evaluate the modeling results. Then, the most prone areas of flood occurrence which are prioritized for management operations are identified based on the prepared map. Based on the results, about 100 km2 of the study area is identified as the most prone area for management operations. The results showed that the accuracy of the maximum entropy model is 98% in the training phase and 95% in the validation phase. The distance from the river, drainage density, and topographic wetness index are identified as the most effective factors in the occurrence of floods, respectively.
V. Moradinasab, S. Hojati, A. Landi, A. Faz Cano,
Volume 27, Issue 2 (9-2023)
Abstract
Parent material and topography are among the soil-forming factors that affect soil evolution by influencing different parameters. This study was conducted to compare the effect of marl and calcareous parent materials in different slope positions, including the summit, shoulder, foot-, and toe-slopes on soil clay mineralogy in the Karoon 3 Basin, east of Khuzestan Province. Four soil profiles in each of the two topo-sequences were dug. They were sampled based on their genetic horizons and some physical, chemical properties, and clay mineralogy were measured. The results showed that the type and abundance of clay minerals identified for both parent materials were more affected by topo-sequence position. The composition of minerals identified in the topo-sequence with marl parent materials included kaolinite, palygorskite, smectite, chlorite, mica, and quartz, and in the topo-sequence with calcareous parent materials, palygorskite, smectite, chlorite, mica minerals, and quartz, and most of the identified minerals were also observed in all positions in the C horizon. However, in marl parent materials kaolinite, and calcareous parent materials, smectite seems to have been formed pedogenically. The result of the association between Weaver and Beck indicated that most of the clay minerals are in the equilibrium of Palygorskite.
A. Shahnazari, S. Sadeghi,
Volume 27, Issue 2 (9-2023)
Abstract
In the present paper, crop pattern criteria have been evaluated relying on sustainable development to increase agricultural water productivity. Seven criteria were selected as the main environmental and economic criteria and were prioritized and reviewed for important and strategic products in the Tajan catchment of Mazandaran province. Criteria prioritization was done using optimization through a genetic algorithm with an objective function based on sustainable development. Then, physical and economic productivity indices were calculated to determine the productivity value. Based on the results, in the selection of the crop pattern, firstly, the category of economic criteria and finally the category of environmental criteria have been given attention to the farmers in the current situation. But in the genetic optimization algorithm, all priorities have a similar order from the environmental point of view and then from the economic point of view although each product has its order of criteria. By this prioritization, the parameters of the cultivated area, the volume of water consumed, and the amount of chemical fertilizers have decreased on average by 26%, 34%, and 21%, respectively, and the parameters of product performance and profitability have increased by 43% and 61%, respectively. In addition to providing environmental standards and increasing sustainable development, this prioritization causes an average increase in physical productivity by 84% and an increase in economic productivity by 72%.
M. Eskandari, M. Heidarnejad, A. Egdernezhad,
Volume 27, Issue 3 (12-2023)
Abstract
The formation of vortices behind the gates of diversion dams is an operational challenge. Such vortices lead to vibration and corrosion in the gate, reducing the lifetime and raising the operational cost of the dam. This study investigated these vortices and their formation. It was found that the gate or cutoff wall was not the only explanation for the vortices; the closed side gates also contribute to vortex formation. Furthermore, an increase in the gate width reduced vorticity; the vortex size experienced a 200% reduction as the gate size increased by 200%. The cutoff wall diameter was another determinant. An increase in the cutoff wall diameter raised vorticity. The vortices increased by 50% as the wall diameter increased by 150%.
R. Dabiri, H. Abghari, A. Ghorbani,
Volume 27, Issue 4 (12-2023)
Abstract
Management of watersheds and sustainable development today requires the most suitable and fastest method of obtaining and integrating information for optimal management and planning. One of the challenges of watershed management in the stage of planning and implementation of remedial and rehabilitation operations is choosing the appropriate and correct location; to have the necessary maximum efficiency and effectiveness, due to the high cost of mechanical operations and the lack of financial resources, select the right place to construct mechanical corrective dams has particular importance. Therefore, the objective of this research was to locate mechanical watershed management operations with a multi-criteria approach using AHP and ANP decision methods and compare the two methods in the geographic information system environment at the Saqezchi-Chay watershed. The research criteria and sub-criteria of 14 variables included soil (depth and texture), climate (type and precipitation amount), land use and Normalized Difference Vegetation Index (NDVI), hydrological factors and soil protection (flow accumulation, sedimentation rate, and curve number), topography (elevation and slope) and economic and social (distance from the village, from loan sources and the road). Expert judgments for weighting were collected through a questionnaire and in a field method with a statistical population of 29 experts and university professors. The results of this research showed that the ANP method had a significant correlation with the AHP method at the level of 95% and with an intensity of 0.839 and by comparing the prioritization of the two methods with Masonry Check Dams structures implemented in the Saqezchi-Chay watershed, it was determined that the ANP method prioritizes with more accuracy and resolution due to its network nature and increasing the range of changes.
Z. Naderizadeh, H. Khademi, A. Shamsollah,
Volume 28, Issue 1 (5-2024)
Abstract
Although several reports are available on the distribution of Palygorskite in the soils of arid regions of Iran, there is not much information about the presence and abundance of this important fibrous clay mineral in the soils of Bushehr Province. This research was carried out: (1) to investigate the distribution of Palygorskite and other major associated clay minerals, and (2) to evaluate the relationship between the relative quantity of Palygorskite in clay-sized fraction and the most important soil properties in Dashtestan County, Bushehr Province. Five geomorphic surfaces including eroded rock outcrop, rock outcrop, dissected hill, alluvial fan, and alluvial plain were identified in the study area using Google Earth images and field observations. After sampling representative pedons, the clay mineralogy of two horizons from each pedon was determined. X-ray diffractograms and SEM images showed that in the studied soils, which were classified as either Aridisols or Entisols, Palygorskite was present in different quantities on all geomorphic surfaces. Moreover, Illite, Chlorite, Smectite, irregularly interstratified Chlorite/Illite, and Kaolinite were the other clay minerals that existed in the soils studied. The relative quantity of Palygorskite and Smectite was variable on different geomorphic surfaces. Regardless of the type of geomorphic surface, petrogypsic and gypsic horizons showed the highest quantity of Palygorskite as compared to other horizons which seems to be due to the suitable geochemical conditions of these horizons for the formation and stability of Palygorskite mineral. The higher correlation of Palygorskite content with gypsum, as compared to that with the carbonates, indicates the importance of gypsum in Palygorskite distribution in the soils of the study area. The findings also indicated that the amount of Palygorskite was positively correlated with soluble Mg/Ca ratio, pH, gypsum, and soluble Mg. These parameters appear to control the genesis and distribution of Palygorskite in the soils studied. In general, it is necessary to pay special attention to their clay mineralogy, especially the significant amount of Palygorskite to manage the soils of the study area and to reasonably predict their behavior.
S. Ghasemi Pirbaloti, S. Soodaee Moshaee,
Volume 28, Issue 1 (5-2024)
Abstract
Since the long-term sustainability of garden ecosystems is dependent on maintaining the soil quality, knowing the condition of the soils and investigating the effects of the activities on the soil properties is very important and effective in ecosystem management. To investigate the soil quality index of almond (Prunus dulcis) orchards under different managed methods in ChaharMahal va Bakhtiari province, soil samples were collected from three points in each orchard and finally classified into 6 groups (Saman, Ben, Shahrekord, Kiar, Ardel, and Farsan). To determine the soil quality index, soil characteristics including pH, EC, total and water-soluble organic carbon, basal and substrate-derived respiration, rhizosphere microbial population, and available soil P and K were analyzed. The results showed that almond orchard management in different regions affected the soil characteristics and the processes evaluated in this study. The monitoring of soil properties showed that pH 7.05 - 8.48, EC 0.23 - 2.91 dS/m, microbial respiration 0.44 - 8.57 mg CO2.100 g-1.day-1, organic carbon 2.09 - 44.79 g/kg, available phosphorus 1.5 - 122.3 mg/kg, and available potassium were between 91.2 - 3038 mg/kg. Soil quality index components including chemical components, microbial activity, microbial population, and soil organic carbon were determined. The contribution of soil salinity to soil quality obtained using factorial analysis was the highest (31%), followed by microbial carbon mineralization coefficient (27%), rhizosphere microbial population (24%), and water-soluble organic carbon (18%). The soil quality index values for Saman, Ben, Shahrekord, Kiar, Ardal, and Farsan almond orchards were 0.46, 0.40, 0.51, 0.67, 0.54, and 0.37, respectively. These values showed that the evaluated soils are suitable for almond production in Shahrekord, Kiar, and Ardal, and for Saman, Ben, and Farsan, there is a need for serious management measures to improve soil quality and increase the sustainability of these agricultural ecosystems.
E. Karamian, M. Navabian, M.h. Biglouei, M. Rabiei,
Volume 28, Issue 1 (5-2024)
Abstract
Cultivation of rapeseed as the second crop requires drainage systems in most of the paddy fields of the Guilan province. Mole drainage, as a low-cost and shallow drainage method that is suitable for rice cultivation conditions and easier to implement than pipe drainage, can be a solution in the development of second-crop cultivation. The present study was conducted to evaluate the drainage of mole drainage and nitrogen fertilizer management on the quantity and quality of drainage at Guilan University. In this regard, an experiment was conducted under two treatments including drainage and nitrogen fertilizer (i.e. traditional mole drainage and sand-filled mole drainage), and 180 and 240 kg of nitrogen fertilizer per hectare in three replications. After each rainfall during the plant growth period, water samples were taken from the drains, and parameters of electrical conductivity, pH, total suspended solids, total phosphorus, turbidity, concentrations of ammonium, chloride, nitrite, nitrate, and phosphate were measured. Also, the outflow from the drains and the water table level were measured by piezometers during the rain and after that. The results of the mean comparison of pH and total suspended solids showed that most of them were obtained with 7.49 and 281.25 mg/liter, respectively, in the mole drain filled with sand and the traditional mole drainage and 180 fertilizer treatment. The highest mean of electrical conductivity and turbidity was observed as 651 micro mohs/cm in the traditional mole drainage and 240 fertilizer treatment and with 67.76 NTU in the traditional mole drainage and 180 fertilizer treatment. The statistical analysis showed that the effect of drainage treatment on the amounts of ammonium, nitrite, nitrate, phosphate, and total phosphorus was not significant. The outflow from the traditional mole drainage was 49% lower than the sand-filled mole drainage. The traditional and sand-filled mole drains were able to drain excess water with average reaction coefficients of 0.8 and 0.83 per day during the growth period, respectively. Considering the speed of water discharge, drain discharge, and the main non-significance of qualitative parameters among drainage treatments, mole drainage filled with sand is recommended for the development of rapeseed cultivation in paddy fields.
M. Saeidi Nia, H. Mousavi, S. Rahimi Moghadam,
Volume 28, Issue 1 (5-2024)
Abstract
Due to the lack of water resources and excessive evaporation in the country, it is necessary to have a detailed irrigation program and a suitable management method. The present research was conducted to investigate the effect of superabsorbent and mulch in Khorramabad in July 2022 in a factorial combination with a completely randomized design in three replications. The first experimental factor was irrigation water treatment in 4 levels including irrigation that provided 100% water requirement (I100), 80% of crop water requirement (I80), 60% of crop water requirement (I60), and 40% of crop water requirement (I40). The second factor included different corrective materials including plant mulch (M), superabsorbent (S), and control treatment (I). The results showed the maximum amount of wet and dry yield and crop height was related to I100-M treatment, i.e. 100 percent water requirement and compost corrective material, which were 89.52 tons per hectare, 29.42 tons per hectare, and 2.27 meters. The maximum wet and biological productivity for I40-S was calculated as 14.24 kg of wet matter per cubic meter of water and 4.75 kg of dry matter per cubic meter of water. The lowest wet and dry yields were related to I40-M, which decreased the yield of the control treatment by 6.5 percent and 0.9 percent. The lowest productivity was related to the I100-S treatment, which was calculated as 3.13 kilograms per cubic meter of water for biological productivity and 9.14 kilograms per cubic meter of water for wet weight productivity. In general, mulch had a better performance in the treatments where the water stress was low, but when the water stress increased, the performance of the mulch treatments decreased. In the superabsorbent matter, the treatments with complete irrigation or with less stress, yield decreased, but the treatments with increased stress showed better results than most of the corrective materials and the control treatment.
