JWSS - Journal of Water and Soil Science

---

Defining interrelationship of growth analysis factors and yield of crop plants is important in the field crop production practices. This research was aimed at studying growth factors and grain yield of five maize hybrids, consisting of S.C.704, S.C.700, S.C.647, S.C.604, and S.C.301, using two 4-replicate RCBD experiments in Isfahan, in Summer 2004. While one experiment was irrigated normally, the other one was conducted under delayed irrigation conditions. Maize plants were seeded at 95000 plants/ha in 8-row plots, with rows spaced 0.70m apart and 0.15m distance between plants on each row. Delayed irrigation led to a significant decrease in LAI_max, LAD, LAD_Linear and LAD_s-m, but a significant increase in days to silking. While CGR_Linear significantly correlated with LAI_max, LAD, LAD_Linear and LAD_s-m, a significant correlation was observed between total biomass and grain yield. CGR_Linear, LAI_max, and LAD_s-m significantly correlated with total biomass, and grain yield significantly correlated with yield components, harvest index, CGR_Linear and LAI_max. In conclusion, an increase in LAI_max resulted in a higher CGR_Linear and in turn a greater total biomass. But, considering no significant correlation between total biomass and harvest index, it appears that with the genotypes and under conditions of the present study, allocation of dry matter to grain production did not correlate with the leaf area attributes of corn.

---

  Planting patterns through growth indices affect yield formation. To evaluate these effects on safflower, Koseh local variety of Isfahan, a field experiment was conducted in summer, 2004 at the Agricultural Research Station, Isfahan University of Technology. The experiment was performed using a randomized complete block design with a split plot layout and four replications. Main plots consisted of three row distances (20 and 30 cm flat and 45 cm on bed), and sub-plots included two planting densities (40 and 50 plant m^-2). The experiment was planted on June 25. The results showed that p lant canopy closed sooner, leaf area duration (LAD) increased and plant dry matter weight, leaf area index (LAI) and crop growth rate (CGR) were higher up to the middle of seed development as row distance decreased. In addition, the highest relative growth rate (RGR) and net assimilation rate (NAR) were obtained in 20 cm row distance. The highest (3039 kg ha^-1) and lowest (1930 kg ha^-1) seed yields were obtained with 20 and 40 cm row distances, respectively. Plant density did not affect the rate of canopy closure, CGR, RGR, NAR and seed yield. But, maximum plant dry weight, higher LAI and lower LAD values were obtained with 50 plants m^-2. The results obtained in this experiment indicate that 20 cm row distance with 50 plants m^-2 might be appropriate for summer planting of safflower, a local variety of Isfahan, under similar conditions.

---

  Photosynthesis and wheat grain yield responses to supplemental irrigation with different amount of applied water under dryland conditions were investigated. Therefore, a two-year field experiment was conducted research farm of College of Agriculture, Shiraz University during 2004-2005. Five levels of irrigation including dryland conditions, irrigation at stem elongation, booting, flowering and grain filling were main plots and two wheat cultivars: Agosta and Fin-15 were subplots, and three rates of nitrogen including zero, 40 and 80 kgha^-1 were sub sub-plots. The results showed that in both years, photosynthetic rate, stomatal conductance, substomatal CO₂ concentration and transpiration rate, were significantly higher under irrigation at stem elongation stage compared to other supplemental irrigation treatments. In all of the four supplemental irrigation treatments, photosynthetic rate, stomatal conductance, substomatal CO₂ concentration and transpiration rate decreased with decreasing the amount of applied water to each plot. In both years, the highest grain yield was obtained from supplemental irrigation at stem elongation stage, and the lowest yield was harvested at dryland conditions. The highest photosynthetic parameters, yield and yield components were obtained from interaction of supplemental irrigation at stem elongation stage × Fin-15 and 80 kg N ha^-1 in both years. The supplemental irrigation in 2004 and 2005 increased the grain yield 200 and 221 percent, respectively, compared to dryland conditions. Thus, supplemental irrigation at sensitive stem elongation stage could affect significantly wheat grain yield of rainfed wheat cultivars and provision of adequate water for a supplemental irrigation at the appropriate growth stage could double the grain yield of rainfed wheat.

---

  An experiment was conducted to investigate the heterosis in 12 F₁ hybrids of durum wheat using agronomic and morphological traits. Parents were selected according to the estimated genetic distances based on the results of a two-year field experiment, which were then crossed to produce F₁ hybrids. Twenty-three genotypes (including 11 parents and 12 hybrids) were evaluated using a randomized complete block design with three replications Research Farm of College of Agriculture, Isfahan University of Technology, located at Lavark, Najaf- Abad in 2003. Agronomic characteristics comprised days to 50% flowering, days to 50% pollination, days to maturity, plant height, spike length, grain weight per spike, number of grain per spike, number of spike per m², 1000-grain weight, biological yield, grain yield and harvest index. The results of analysis of variance showed significant differences among parents F₁ hybrids and parents vs. crosses for all the studied traits. Substantial differences in the level of heterosis for plant maturity were detected among the hybrids with the highest heterosis belonging to H_{PI40100×PI40099} and H_{Eupoda6× Chahba88} hybrids. Furthermore, superior hybrids included H_{Altar84/Ald×Chahba88}, H_{Buchen7×Chahba88 and} H_{Eupoda6×Mexi75/Vic} possessing the highest heterosis for grain yield and grain yield components among 12 hybrids of the present experiment. Eventually, it is concluded that Eupoda6, Odin12, Altar84/Ald and 45063Karaj genotypes when crossed with Mexi75/Vic genotype as well as Buchen7 and Altar84/Ald genotypes when crossed with Chahba88 genotype produced superior F₁ hybrids.

---

During recent years, several genotypes have been selected from Isfahan land race Kouseh. The performance of safflower selected genotypes was studied in the field conditions, at Agriculture Research Station, Isfahan University of Technology during 2003. The experiment was carried out using a split plot arrangement according to a randomized complete block design with three replications. Planting dates (March 11, April 20, May 22 and June 23) were considered as the main plots and subplots consisted of 20 genotypes of safflower including 19 selections from Kouseh and Arak-2811 genotype. Days from planting to emergence and emergence to stem elongation were reduced as planting was delayed until the fourth planting date. Days from stem elongation to head visible was reduced with delay from the first to the third planting date, and then increased. Days from head visible to 50% flowering was reduced with delay from the first date to the third planting date, but increased in the fourth planting date. Days from 50 percent flowering to physiological maturity was increased with delay in planting. Days from planting to emergence, emergence to stem elongation, stem elongation to head visible and 50 percent flowering to physiological maturity were not influenced by genotypes. Genotype DP7 had the highest and genotype C111 and genotype DP25 had the lowest days from head visible to 50% flowering. The interaction between planting date and genotype in regard to days from stem elongation to head visible was also significant. Seed weight per plant was reduced with delay in planting date. Genotype ISF66 had the highest and genotype Arak-2811 had lowest seed weight per plant. The number of days from emergence to head visible in ISF66, DP5, C128 and Arak-2811 was affected by maximum temperature (Tmax), in genotype DP7 by Tmax², in genotypes DP17, DP1 and C41100 by Tmin² and in genotypes DP9, DP25, ISF28, ISF22, and C111 was affected by day length. It seems that development period from emergence to head visible was affected by temperature in the most genotypes. On March 11 planting date, genotypes had the maximum response to temperature and day length and the minimum response was observed in the fourth planting date. The genotype ISF66 had the highest seed yield on March 11 planting date. The result of this study showed that safflower should be planted in late March under condition similar to this experiment for maximum yield production.

---

In order to investigate the effect of zinc - chelate on drought tolerance of Azadi cross wheat, a randomized complete block design was conducted as split plot with three replicates in the Kherameh during 1383 - 1384. The main plot was four drought levels (control and drought stress in the stages of flowering, seed milk stage and two phases, together), and sub plot was zinc - chelate rates 0, 5, 10 & 15 kg per hectare. The results showed that zinc application under drought conditions increased spike per square meter significantly at the 5% level. Drought stress decreased 1000 - seed weight. Least of 1000 - grain weight was in two phases of flowering and seed milk stage together (29.78 g). The application of 15kg zinc -chelate fixed 1000 - seed weight. Treatments of drought stress decreased seed yield significantly (14.17% in the proportion of control), but zinc - chelate application increased wheat tolerance to seed yield decrease. Zinc - chelate application prevented from seed number decrease per wheat spike under drought conditions that was caused to tolerance of seed yield and harvest index decrease. The application of 15 kg zinc - chelate increased harvest index in comparison of control amount of 22%.

---

In order to study the effect of various amounts of nitrogen (N) and Iranian natural zeolite on the quantitative and qualitative forage yield of winter canola (Brassica napus L.) in light soil, a field experiment was conducted on research farm of Tarbiat Modares University, Tehran, during 2006-2007. Treatments were arranged in the form of RCBD with 3 replications. The experimental treatments were based on factorial various levels of zeolite (0, 3, 6 and 9 t.ha^-1) and nitrogen (90, 180 and 270 kg ha^-1) in urea form. Seeds of canola (Brassica napus L. cv. Okapi) were sown on October 2, and fresh forage was harvested at the time of silique formation (170 DAP). Results showed that the effect of N and zeolite on forage quantitative attributes including biomass, leaf and stem dry weight and leaf area index were statistically significant. In addition, forage qualitative traits including crude protein percentage and calcium percentage in plant mass were significantly affected by N and zeolite. Increasing application of N fertilizer caused increase in N leaching, and with increasing zeolite application, N leaching reduced. The interaction of two factors for all parameters was not significant. The most increasing effects on forage yield and quality were gained using 270 kg N ha^-1 in combination with 9 t. Zeolite ha^-1. More detailed studies are strongly recommended to investigate the effects of integrated application of chemical fertilizer and natural zeolite.

---

Drought is a major factor limiting growth and development of crops such as mung bean (Vigna radiate (L.) wilczek) in arid and semi-arid regions of the world. This study was conducted to investigate the effects of different timing and severity of drought stress on physiological traits of mung bean and its relation to grain yield. A field experiment was carried out during 2004 growing season at Experimental Farm of Agriculture College, University of Tehran, Karaj, Iran. The treatments were laid out in a Randomized Complete Block Design (RCBD) with three replications. Plants were exposed to moderate and severe water stresses at either vegetative (VS) or reproductive stages (RS). Physiological traits were measured at the end of vegetative and the middle of pod formation. Generally water stress reduced leaf net photosynthesis rate, stomatal conductance and leaf relative water content at different growth stages. The effects of RS treatments were more severe than that of VS one. Severe VS treatment increased photosynthetic water use efficiency, whereas RS treatments decreased it significantly. However, leaf area index and total dry matter were more responsive in VS compared to RS treatments. VS treatments did not affect harvest index, while RS treatments reduced it significantly. Drought stress also reduced grain yield by 9 and 49 % (relative to control plants) in severe VS and severe RS treatments, respectively. Therefore irrigation is critical during reproductive stage mainly because of the higher demand for photoassimilate. It is concluded that to maximize mung bean grain yield in arid and semi-arid areas, appropriate watering should be practiced across all phenological stages in general, and during reproductive stage in particular.

---

Safflower having oil with high unsaturated fatty acids is a very valuable plant. However the sensitivity of safflower to some pests as safflower fly (Acanthiophilus helianthi), particularly in drought stress conditions has limited its production. In order to evaluate the effect of drought stress on population density and damage of important safflower pests, especially safflower fly, an experiment was conducted in the field using 5 irrigation treatments including 50, 70, 90, 110 and 130 mm evaporation from class A pan in a randomized complete block design with three replications. The local safflower variety used in this study was Isfahan land variety, Kooseh. In each irrigation regime, the half of one plot was locally sprayed by Chlorpyrifos in 2ml per liter of water to be compared with non-sprayed part. During 8 weeks of sampling, population of aphids, Uroleucon carthami, leafhopper, Empoasca decipiens and safflower fly, A. helianthi and also percentage of damaged heads by safflower fly were measured. The results showed that in non-sprayed conditions, the highest safflower fly (2.38 flies per net) and aphid population (165.57 aphids per plant) was observed at 130 mm evaporation regime. Drought stress also decreased (30.23 %) safflower seed yield. Severe drought stress together with non-spaying may increase safflower pests population particularly safflower fly and reduce seed yield. However low level of drought stress (70 mm evaporation from class A pan) may decrease relative number of insects and save irrigation water. Drought stress also decrease the population of leafhopper. In this study, 70 mm evaporation regime was the optimum irrigation treatment regarding lower aphid and fly damage (15.86% damaged heads in non-sprayed condition) and higher safflower seed yield (1687.5 kg/ha in sprayed condition).

---

In order to study changes in morphophysiological traits of wheat cultivars released from 1940 to 2000 in Iran and to determine the association of these traits with grain yield, an RCBD experiment was conducted with 15 wheat cultivars released during past 60 years in Arsanjan (Fars province) in 2006 and 2007. Results indicated that grain yield increased significantly during these 60 years (r=0.912, P<0.01). HI and BY increased significantly with increasing grain yield. The changes in photosynthesis rate were not significant during this period, but transpiration rate and stomotal conductance in recent cultivars increased significantly. Chlorophyll index also increased in new cultivars. Among yield components, grain number per ear increased significantly, but increase in ear number was not significant. Plant height decreased significantly in new cultivars. The results showed that during wheat breeding in Iran, increasing HI, grain number per ear, transpiration rate, stomatal conductance and decreasing plant height had the highest role in wheat yield increase. The role of BY and ear number per area were lower in grain yield increase. It seems that present HI values are near the highest possible value, but the opportunity for increasing grain yield by mean of HI is still possible.

---

In order to evaluate the effects of sulphur fertilizer sources and amounts on growth indices and yield of peanut (Arachis hypogaea L. CV. NC2), a field experiment was conducted in Bandar Kiaashahr, Guilan province, Iran in 2004. The experiment was laid out in a factorial arrangement with two factors including sulphur sources (gypsum and single super phosphate) and sulphur rates (0, 30, 60 and 90 kg.h-1) in a completely randomized block design with three replications. Results showed that sulphur application greatly enhanced peanut growth and yield. The application of 90 kg.h-1 sulphur (in both forms) performed significantly better than the rest. The highest pod yield and grain yield were obtained in 90 kg.h-1 sulphur in gypsum form (6400 and 5200 kg.h-1, respectively). The highest LAI (6.6), CGR (20.2 g.m-2.12GDD-1) and PGR (16 g.m-2.12GDD-1) were obtained in 90 kg sulphur in the form of gypsum after 1142, 1142 and 1289 of accumulation, respectively. According to the results of the present experiment, it could be concluded that sulphur may considerably increase peanut grain yield and yield components. Thus, it could be expected that the application of 90 kg sulphur per hectare in the form of gypsum may result in better growth indices and higher grain yield of peanut.

---

To assess adaptability and stability of seed cotton yield in promising cotton genotypes, eight cultivars of cotton (Gukorova, Nazeli–84, Khordad, No: 200, Crema, Tabladila, Beli Izovar and Sepid), along with two controls (Sahel and Varamin), were studied in a completely randomized block design (RCBD) with four replications in six regions of Golestan and Mazandaran provinces in two successive years (2005 & 2006). Combined analysis of variance was done and means comparison of yield was conducted based on Duncan's multiple range test. Sepid, Beli Izovar, Varamin and Khordad varieties were superior for yield, earliness, boll weight and boll number, respectively. The result of combined variance analysis showed that, there are significant differences between genotypes and genotype × environment (G.E) interaction effect. Because of significant G.E interaction effect univariete stability parametric and non-parametric stability methods were used to determine genotype stability. The results of varied methods were different. The 43200 and Sepid cotton cultivars had a specific adaptation and were suitable cultivar for fertile lands in north of country, because of good reaction to production high yield. In contrast, Sahel cultivar with lowest yield had broad stability with non-fertile regions. Overall, three genotypes (Khordad, Tabladila and Gukorova) were determined with suitable stability and moderate yield (general stability) for most locations in north of country.

---

Correlation between components of Q/I and wheat (Triticum aestivum L.) growth indices was studied in a greenhouse experiment during 2003-04 growing season. Eighty soil samples (0 – 30 cm depth) were collected randomly in farms around the Abyak region, Ghazvin province. Twenty-one samples were then selected based on soil texture and NH4OAC-K. The research included treatments of 21 soils and two potassium (K) levels (0, 100 mg/kg) and was conducted in a factorial manner in a randomized complete block design with three replications for studying correlations between Q/I and treatments. Effect of potassium application on the wheat growth was found to be significant at 5% level. The effect of soil properties on wheat growth was also found to be significant at 1% level. However, the interaction of K and soil was not significant. There were no significant differences among the different equilibrium time intervals. The soil potassium buffering capacity (PBCK) values were strongly correlated with CEC (r =0.996**), clay content (r = 0.921**) and moisture saturation percentage (r = 0.811**). Final equation derived from stepwise regression for prediction of PBCK was as follows: PBCK = 7.419 CEC –19.743 R2adj = 0.782** The equilibrium potassium activity ratios (ARke) were strongly correlated with soluble potassium (r =0.846**), NH4OAC-K (r =0.730**), SP (r = 0/794*), OC (r = -0.477ns) and clay content (r=-0.602*). Similarly, readily exchangeable potassium (ΔK0) was strongly correlated with ammonium acetate extractable potassium (r = 0.871**), soluble potassium (r = 0.778**), saturation percentage (r = 0.551*), organic carbon percentage (r=-0.045ns) and clay content (r=-0.206ns). There was no significant correlation between ΔK0 and ARKe with potassium uptake values by wheat. In contrast, there was a strong correlation between PBCK values and potassium uptake by wheat (r = 0.729**), and relative wheat yield (r = 0.735**). There was no significant correlation between Q/I parameters when KCl and K2SO4 were used, and the soil physicochemical properties. However, Q/I parameters obtained from KCl showed a higher correlation with wheat plant's growth indices.

---

The optimum levels of soil moisture and nitrogen are important to obtain higher yields. To investigate the effects of water stress, nitrogen levels and application times on yield and yield components of sunflower (Helianthus annuus L.), the cultivar Euroflor at different growth stages, a two year study (2006-007) was conducted at Research Fields of College of Agriculture, Shiraz University (Badjgah) using a split factorial design with four replications. Treatments were water stress at three levels, (non-stress and stress at flowering and seed formation) as main plot and three N levels (0, 70, 140 kg ha-1) and N application times (split application at planting and stem elongation, planting and heading, and stem elongation and heading) as subplot. Number of seed per head, 1000-seed weight, seed yield, Oil yield and HI were measured. Results showed that the effects of water stress and N rates on yield and yield components were significant, but the effects of N application times and interaction between water stress, nitrogen rates and application times were insignificant. Overall, the crop showed more sensitivity to drought stress at flowering time, and 70 kg N ha-1 is recommended for the region.

---

To evaluate the effect of nitrogen slowly released from pellet, composed of manure and urea fertilizer on the Nitrogen efficiency and morphological Characteristics and grain yield of corn hybrid (S.C704), a field experiment was carried out in Aboureihan research farm of Tehran University in 2009. The factorial design of the study comprised a randomized complete block with three replications. The application rates of N at four levels (46, 92, 138 and 184 kg N. ha-1) and two levels by methods of N distribution (pellet and mixed with soil) were applied. In this research, a Screw Extruder setup was designed and manufactured. Statistical analysis indicated that NUE, as well as agronomic efficiency (AE) was reduced while physiological efficiency (PE) increased with increasing N rates. Also, most plant length and stem diagonal and cob diagonal pellet belonged to the treatment. But, the number of leaves per plant did not affect the distribution method of fertilizer.The results showed significant differences among various rates of nitrogen and methods of N distribution considering grain yield and grain protein. The higher rates of N increased grain protein, grain yield and yield components (except for number of rows per ear). Maximum grain yield (11.1 t. ha-1) was obtained with 184 kg N. Ha-1 treatment.

---

Cadmium is a toxic element in plant nutrition and is considered as a contaminant of food and feed. A greenhouse experiment was carried out to examine the effects of combined application of cadmium and zinc on responses of wheat on a clay loam soil texture. This experiment was designed in a factorial experiment with randomized complete block design (RCBD) and four replicates per treatment. Three levels of cadmium (Cd 0, Cd 50 and Cd 100 mg kg-1) and three levels of zinc (Zn 0, Zn 50 and Zn 100 mg kg-1) were added to the pot in factorial(9 treatments), and then Chamran seed variety of wheat (triticum aestivum L.) was planted in each pot. The statistical analyses showed that Cd application significantly (P0.01) decreased grain, straw, and total yield, but Zn application increased these parameters significantly (P0.01). Application of Cd separately decreased the grain yield by 61.5 while application of Zn separately increased the grain yield by 36.9. Cd application increased the Cd concentration and uptake by grain and straw as well as total uptake but by increasing Zn application, Cd uptake was decreased by wheat. Cd concentration was higher in straw than that grain, but Zn showed a different trend. Decreasing Zn applications decreased total uptake of Cd from 42.9 in Zn0 to 7.8 mg kg-1 in Zn100 treatment. Although this soil was very calcareous, this characteristic did not control Cd absorbtion.

---

Four partial root zone drying (FULL, 1PRD50, 2PRD50, 3PRD50) treatments were investigated on tomato characteristics and water use efficiency using completely randomized design with five replications. In the control treatment (Full irrigation), all water requirement of plant was met in the root area equally during the growing season. Roots in 1PRD50, 2PRD50 and 3PRD50 treatments were divided into two equal parts and each side of root was irrigated one, two and three times, respectively. Results showed that the highest (44.43 g) and lowest (24.57g) tomato mean weights were obtained at full irrigation and 3PRD50, respectively. Maximum of diameter (43.1 ml) and fruit number (46 No) was observed in the control and minimum of these traits (15.6 ml and 20 No, respectively) was observed in 3PRD50 treatment. There was a highly significant difference between fruit number in all treatments. Highest yield and marketable yield was obtained in the control and 1PRD50 treatment, respectively. The highest irrigation water use efficiency was obtained in 1PRD50 (48 percent more than the control) and the lowest value was in 3PRD50 (27 percent lower than the control). Based on results of this study, partial intermittent irrigation (1PRD50) is recommendable for tomato production.

---

The effects of water quality, installation depth and space of subsurface drip irrigation (SDI) laterals on yield and visual quality of turfgrass were investigated. A field experiment was conducted at the experimental farm of Shahrekord University. The experimental design was a Split-Split Plot with experimental arrangement of completely randomized block design with 16 treatments and three replications. Treatments included two types of water quality: well water (W) and treated wastewater (WW), two installation spaces of SDI laterals (45 and 60 cm) and four depths of placement of SDI laterals (15, 20, 25 and 30 cm). Turfgrass indices recorded during the experiment included height, dry mass, color, visual density and growth uniformity. The ANOVA results showed that interaction of irrigation water quality × lateral spacing × installation depth of SDI laterals is significant on the height, dry mass and growth uniformity of turfgrass. Irrigation with wastewater as compared to well water produced grass with significantly higher height and more dry weight. Treatments irrigated with well water had a better growth uniformity than those treatments irrigated with wastewater. Results indicated that there was no significant effect of experimental factors on turfgrass color. The interactional effect of lateral spacing and installation depth on the turfgrass density was significant. Increasing installation depth and laterals spacing caused a decrease in turf’s yield and visual quality.

---

Nowadays, due to the effective role of nitrogen fertilizer in growth, yield and crop quality, farmers apply large amount of chemical fertilizers. High application of nitrogen fertilizers has caused soil and water pollution and environmental dangers, higher nitrate accumulation in plant, and different disease risks in human and livestock. In order to investigate the effects of nitrogen and cycocel application effects on soil nitrate pollution and agronomic traits of rice, an experiment was arranged in split plot based on a completely randomized block design with three replicates at Sari region (north of Iran) in 2010. The main factor was nitrogen in four levels and cycocel was considered as a sub factor in three levels. Results showed that maximum and minimum plant height and fourth internodes bending moment were obtained in 0 and 150 kg N ha-1, respectively. Higher filled spikelet percentage per panicle, grain yield and harvest index were obtained in 100 kg N ha-1 application. Application of N up to 150 kg N ha-1 increased soil nitrate by 44.7 percent. As cycocel application decreased, the plant height and panicle length were reduced, but tiller number per plant, filled spikelet percentage per panicle, and grain yield were increased.

---

Nowadays, due to the high potential of advanced simulation models for groundwater, these models are comprehensively applied in the management and exploitation of groundwater resources. The aim of this study was to investigate and simulate the groundwater resources in Kouhpayeh-Segzi watershed and in particular estimate the hydrodynamic coefficients of unconfined aquifer. After preparation of input layers, efficient parameters in modeling, boundary conditions and aquifer gridding were determined. Then, based on the available data, the model was run and calibrated in a steady state for the water year 2002 and in a transient state for water years between 2002 and 2004. The simulation outputs were confidently verified for the water year 2005. The results indicated that the hydraulic conductivities and storage coefficients were ranged on sub-basin from 15.26 to 19.87 m/day and 0.0107 to 0.0186, respectively. From aquifer's hydrograph for a period from 1995 to 2012, water level dropped about 25 cm. This may be due to two irrigation networks (green area). This leads to rising water level. By ignoring these recharge areas, water level declined up to 80 cm per year. With sensitivity analysis in transient state to evaluate the efficacy of each parameter, the accuracy of the results of calibration model was confirmed. In addition, the hydraulic head values computed by MODFLOW were in good agreement with those that were collected from all piezometers.