Showing 45 results for Moradi
Y. Nabipoor, M. Vafakhah, H. R. Moradi,
Volume 18, Issue 67 (Spring 2014)
Abstract
The occurrence trend of floods in recent years shows that the most of Iran regions located in attacks of destructive floods and loss of life and property of flood damages is increasing. Watershed management practices (WMPs) are one of the superior and appropriate solutions for flood hazards mitigation. The impact of WMPs can be investigated using different approaches. In this study, the direct impact of WMPs was investigated using quantitative evaluation of flood characteristics for two periods, pre and post periods of measures implementation. Therefore, daily hydrograph of investigated periods and the results of flood analyses including number of floods occurrence, flood frequency percent in the different months and seasons were determined in Hajighoshan and Tamar hydrometery stations. Also, the mean continuing, rise and subsidence time of floods and maximum peak discharge of observed floods were investigated. The research results showed that the occurrence trend of floods had relatively increased. The number of floods has increased in post periods of measures implementation in two hydrometery stations, while WMPs effect on all flood characteristics were positive, as the continuing time of floods has increased with 0.5%, rise and subsidence time of floods and maximum peak discharge of floods have decreased with 7.9%, 21.98% and 70%, respectively. Totally, if WMPs volume pre watershed area isn't low, WMPs effect on flood characteristics will be positive.
F. Moradi, B. Khalilimoghadam, S. Jafari, S. Ghorbani Dashtaki,
Volume 18, Issue 69 (fall 2014)
Abstract
Soft computing techniques have been extensively studied and applied in the last three decades for scientific research and engineering computing. The purpose of this study was to investigate the abilities of multilayer perceptron neural network (MLP) and neuro-fuzzy (NF) techniques to estimate the soil-water retention curve (SWRC) from Khozestan sugarcane Agro-Industries data. Sensitivity analysis was used for determining the model inputs and appropriate data subset. Also, in this paper, the van Genuchten and Fredlund and xing models were used to predict SWRC. Measured soil variables included particle size distribution, organic matter, bulk density, calcium carbonate, sodium adsorption ratio, electrical conductivity, acidity, mean weight diameter, plastic and liquid limit, resistance of soil penetration, water saturation percentage and water content for matric potentials -33, -100, -500 and -1500 kPa. The results of this study in terms of various statistical indices indicated that both MLP and NF provide good predictions but the neural network provides better predictions than neuro-fuzzy model. For example, using MLP and NF models values of NMSE at prediction θs, θr, α, n and m in Fredlund and Xing equation corresponded to (0.059, 0.065), (0.154, 0.162), (0.109, 0.117), (0.129, 0.135) and (0.129, 0.145), respectively. Furthermore, α and n parameters at the first depth, and θr and α parameters at the second depth in Fredlund and Xing equation were estimated with higher accuracy compared with equivalent parameters in van Genuchten equation
Sh. Moradipour, H. Zeinivand, A. Bahremand, A. Najafinejad,
Volume 18, Issue 69 (fall 2014)
Abstract
Evaluation of hydrologic behaviour and soil erosion as an environmental crisis is important in order to maintain watershed ecological safety at optimum level. The aim of this study is to evaluate the performance of the distributed hydrological WetSpa model in simulating erosion and sediment transport and also sedigraph in Taleghan watershed, Iran. Base digital maps and daily meteorological time series data for 9 years are the major model inputs. The calibration of global parameters was done for the first 5 years and the model validation was carried out for 4 years considering three month warm-up period at the beginning of both calibration and validation periods. The Nash-Sutcliffe criterion for the calibration and validation periods pointed out the efficiency of model simulation (82.7% and 79%, respectively). The next phase, the erosion module was calibrated for erosion and sediment transport simulation. The results showed the Nash-Sutcliffe efficiency criterion (60% and 64% for suspended sediment concentration and transport, respectively). Overall, the evaluation results reveal the good ability of WetSpa model in simulation of the hydrological processes e.g., runoff, raindrop detachment, runoff detachment, net soil loss, etc., in a given time and space
H.r. Pourghasemi, H.r. Moradi, S.m. Fatemi Aghda,
Volume 18, Issue 70 (winter 2015)
Abstract
The objective of the current research was to prioritize effective factors in landslide occurrence and its susceptibility zonation using Shannon’s entropy index in North of Tehran metropolitan. To this end, 528 landslide locations were identified using satellite images such as Geoeye (2011-2012), SPOT-5 (2010), and field surveys, and then landslide inventory map was created for the study area in ArcGIS environment. Data layers such as slope degree, slope aspect, plan curvature, altitude, lithology, land use, distance of road, distance of fault, distance of drainage, drainage density, road density, sediment transport index (STI), stream power index (SPI), topographic wetness index (TWI), normalized difference vegetation index (NDVI), surface area ratio (SAR) and topographic position index (TPI) were created and the mentioned maps were digitized in GIS environment. Prioritization of effective factors by Shannon’s entropy index showed that the layers such as land use, lithology, slope degree, stream power index, and NDVI had the most effect on landslide occurrence. However, factors of topographic position index and plan curvature had the least effect. Also, landslide susceptibility zoning by the mentioned model and its accuracy assessment using relative operating characteristics (ROC) curve and 30 percent of landslide locations showed an accuracy of 82.83% with a standard error of 0.0233 in the study area.
H. Torabi, V. Moradinasab,
Volume 18, Issue 70 (winter 2015)
Abstract
Terraces are old geomorphic surfaces that are not related to present streams and are best places to study the effect of time on soil formation (chronosequence). This research was carried out to study some physico-chemical parameters especially different forms of iron as soil development indices on terraces of Karaj River in Hassan-Abad, southern Tehran. To determine soil development indices in 4 profiles occurring on 4 terraces, some physical and chemical properties were measured and free iron(Fed), aluminum(Ald), silica(Sid) and manganese(Mnd), amorphous Fe(Feo), Al(Alo), Si(Sio), Mn(Mno) and Fe, Al, Si-humus complexes were extracted. Results showed that clay, fine clay/total clay, CEC, the color redness and leaching of calcium carbonate increase toward higher terraces. Contents of Fed, Ald and Sid increases from lower terrace (T1) to the higher terrace (T4). Fed-Feo and Feo/Fed as the most important indices of soil development were enhanced and reduced from lower terrace (T1) to higher terrace (T4) soils, respectively, which indicate an increase in iron oxides crystalinity and soil profile development. Contents of Fed-Feo in the B horizons from T1 to T4 were 600, 800, 1000, and 1400 mg/kg soil, respectively. Calculation of Ferrihydrate and Fe-hydr(oxide) such as goethite and hematite showed that the amounts of these components were increased from T1 to T4 terraces confirming the variation of (Fed-Feo), (Feo/Fed) and (Feo-Fep) indices.
S. Shahmoradi, M. Afyuni, M. A. Hajabbasi, A. H. Khoshgoftarmanesh, M. Shirvani,
Volume 19, Issue 71 (spring 2015)
Abstract
In this work, the effect of raw and modified bentonite and zeolite with trivalent iron on the stabilization of water-soluble and adsorbed arsenic in a calcareous soil was studied. Raw and modified bentonite and zeolite were added to the soil in different weights in a completely randomized block design with three replications and kept to field capacity soil moisture content of 80% for 8 weeks. The concentrations of water-soluble and adsorbed arsenic, water-soluble and absorbed phosphorus in soil and soil pH were measured. Treatments significantly affected the mobility of arsenic and phosphorus in soil. Raw zeolite and bentonite in different levels increased arsenic mobility (about 107 to 325 % and 259 to 350% respectively). Despite the change in surface properties of zeolites modified with iron, this treatment at different levels increased arsenic mobility in soils by about 124 to 246%. Bentonite modified with iron had the greatest effect on reducing arsenic mobility in soil (about 91%). Phosphate mobility was similar to arsenic in different treatments.
V. Moradinasab, M. Shirvani, M. Shamsaee, M. R. Babaee,
Volume 19, Issue 74 (Winter 2016)
Abstract
Mobarakeh Steel Complex has been using treated industrial wastewater for irrigation of green space to combat water shortage and prevent environmental pollution. This study was performed to assess the impact of short-, middle-, and long-term wastewater irrigation on soil quality attributes in green space of this complex. Soils were sampled from the wet bulb produced by under-tree trickles in three depths of forested lands irrigated with treated wastewater (for 2, 6 and 18 years) or groundwater. Several chemical, physical and biological characteristics of the soil samples were determined in the laboratory and compared to those of the native unirrigated soils as the controls. The results showed that pH was significantly reduced in the wastewater-irrigated soils as compared to the control. Organic matter content and cation exchange capacity significantly increased in the irrigated soils due to the incorporation of tree leaves into soil. Soil salinity also increased as the irrigation period increased because of the relatively high salinity of water and wastewater used for irrigation. Microbial basal respiration and arginine ammonification were greater in the irrigated soils in comparison to the control. In general, forestation and irrigation management have improved most of the soil quality indexes in the Mobarakeh Steel Complex green space, but some soil characteristics, such as salinity, need to be monitored and improved in future.
F. Imani, M. Moradi, R. Basiri,
Volume 20, Issue 77 (Fall 2016)
Abstract
This study was done to evaluate the effect of afforestation in sand dunes at the vicinity of Shush, because of the importance of soil protection and wind erosion in sand dunes, also sand dunes afforestation as an effective and long lasting fixation mechanism. The study site was covered by petroleum mulch about 20 years ago and afforested by Prosopis juliflora. To study the effects of afforestation on sand dunes, two 10 ha afforested sites (25-50 and 75-100 percent canopy coverage) and control were selected. In each of studied site 15 plots were established and soil physiochemical properties were determined. Our result indicated that afforestation caused soil texture to change from sandy to sandy-loam. Also, soil phosphorus, potassium, organic carbon and nitrogen increased in 0-5 cm soil depth by afforestation that could be because of nutrient absorption from soil depth and returning to the surface by litter fall compared to the control. This study revealed that 25-50 percent canopy coverage resulted in better soil physiochemical properties compared to control site. In conclusion, sand dunes afforestation not only resulted in sand dunes fixation but also soil fertility and long lasting fixation.
S. Moradi Behbahani, M. Moradi, R. Basiri, J. Mirzaei,
Volume 20, Issue 78 (Winter 2017)
Abstract
Salt cedar is widely spread out in most part of the country but there is lack of information about its symbiosis with arbuscular mycorrhizal fungi. Then, the main objective of this study was to evaluate the symbiosis of AMF with salt cedar and its affectability by distance from river and soil physiochemical properties. For this purpose, riparian Maroon forest width was divided to three locations including riverside area, intermediate area and the area far from river with 200-hundred-meter interval. In each site 10 salt cedars were randomly selected and soil plus hair root samples were gathered from the salt cedar rhizosphere. Our result indicated that root colonization and spore density in the intermediate distance had the lowest and highest values, respectively. These values were significantly different compared to the other two sites. The average root colonization percent in the riverside area, intermediate area and the area far from river sites were 82.37, 73.77 and 80.17, respectively. While the average spore density in the riverside area, intermediate area and the area far from river were 189, 245.5 and 188.8 in five gram soils, respectively. Root colonization had significant positive correlation with soil potassium while spore density had significant correlation with studied soil physiochemical properties. Also, soil nitrogen, organic carbon, potassium and clay showed 52.6, 51.19, 50 and 23.4% decreasing trend from the riverside area to the area far from river. Regarding this research results, salt cedar showed high level of symbiosis with arbuscular mycorrhizal fungi but this symbiosis could be affected by distance from river in riparian forest.
Msc S. Shahmoradi, Dr M. Afyuni, Dr M. Hajabbasi, Dr A. H. Khoshgoftarmanesh, Dr M. Shirvani,
Volume 21, Issue 2 (Summer 2017)
Abstract
During last century, waste water of gold mine has accumulated heavy metals such as lead, zinc and cadmium in Zarshuran region soil, and thus has increased epidemic disease in this region drastically. The purpose of this research was to reduce the mobility and bioavailability of zinc, lead and cadmium in rhizosphere of sunflower grown in soil around the mine by inorganic sorbents. A pot experiments was carried out with three levels of raw zeolites (1, 6, 12 wt%), three levels of raw bentonite (1, 6, 12 wt%) and control (without sorbent) in a completely randomized block design with three replications. After cultivation, soil and plant samples were taken and the concentration of lead, cadmium and zinc in their samples were measured. Different levels of bentonite reduced the absorbable concentration of lead and zinc; and also reduced their absorbable concentrations in plant tissue, but had no significant effect on reducing absorbable concentration of cadmium. Transfer factor for all three metals in the roots was more than shoot and reducing the concentration of heavy metals in the plant had no impact on plant growth. According to the study, level of 12 wt% of the raw bentonite was the most suitable sorbent for the stabilization of lead and zinc; and level of 12 wt% for raw zeolite was the best sorbent for stabilization of cadmium.
H. R. Moradi, M. Rahmati, H. Karimi,
Volume 22, Issue 1 (Spring 2018)
Abstract
Groundwater is a major source of drought. Karstic aquifers are important sources of groundwater in the West and Kermanshah province. This study was performed to investigate the effects of the meteorological drought on the karstic aquifer with different conditions of development. The studied areas in this research included two karstic aquifers, Bistoon-Parau and Patagh mountain in Kermanshah province. In this study, we used monthly precipitation and springs discharge during a period of 20 years. Accordingly, the SPI and SDI indices were used to investigate the different states of meteorological and hydrological droughts, respectively. To determine the relationship between meteorological droughts and groundwater, Pearson correlation was used; aalso, to determine the time delay, the correlation between the different time conditions (no delay and delay 1 to 6 months) of the SDI index and the SPI index was investigated. The results of the relationship between the meteorological drought and groundwater showed that both had a significant correlation (p-value: 0.01). Also, based on the results of the correlation between different time conditions (no delay and delay 1 to 6 months) ,the SDI index was compared to the SPI index, showing that the time delay between the occurrence of meteorological drought and groundwater in the studied areas without time delay or a maximum one-month delay had happened. Based on the results, Pearson correlation coefficients between the SPI and SDI indices in the Bistoon-Parav region were more than those of the Patagh mountain region indicating the development of the Bistoon-Parav karst region, as compared with the Patagh Mountain.
H. Shirani, S. Shirvani, M. Moradie,
Volume 22, Issue 2 (Summer 2018)
Abstract
In recent years, microbial contamination of surface and groundwater is a serious problem in some countries, leading to dangerous diseases. Soil salinity and irrigation water can affect the amount of transport or survival of bacteria in soil. In this study, the effect of different levels of salinity of irrigation water with EC: 0.5, 2.5, 6 ds/m and three manures including poultry manure, cow manure and the mixture of poultry and cow manure with 10 ton ha-1 on the transport of Escherchia coli was investigated in disturbed soil columns with 30cm height and 10cm diameter under unsteady-state water conditions. The concentration of Escherchia coli was measured. The severity of the effluent contamination of the treated columns with water salinity was 6 ds/m, which was less than that with the salinity of 2.5 and 0.5 ds/m. This difference was significant at the 0.01 probability level. Also, the effluent contamination of poultry manure-treated columns was greater than the cow manure and the mixed manure, and the contamination of mixed manure was greater than that of cow manure. The interaction of different salinity treatments on the concentration of Escherchia coli in different fertilizer treatments was significant at the 0.01 probability level. The results showed that the concentration of the released bacteria was affected by irrigation water salinity and with increasing the salinity, the concentration of the bacteria was reduced.
Z. Amiri, M. Gheysari, M. R. Mosaddeghi, M. S. Tabatabaei, M. Moradiannezhad,
Volume 23, Issue 2 (Summer 2019)
Abstract
Location of soil moisture sampling in irrigation management is of special importance due to the spatial variability of soil hydraulic characteristics and the development of root system. The objective of this study was determination of the suitable location for soil moisture sampling in drip-tape irrigation management, which is representative of the average moisture in the soil profile (θavg) as well. For this purpose, soil moisture distribution (θij) at the tassel stage of maize and one irrigation interval (68-73 day after plant) were measured at the end of season. The results showed more than 70% length of the root of plant was located in 30 cm of the soil depth. By accepting ±10% error in relation to the averaged soil moisture, some region of soil profile was determined which was in the acceptable error range and also near the averaged soil moisture (0.9θavg<θRec<1.1θavg). By overlapping θRec in one irrigation interval, the appropriate location for soil moisture sampling was the horizontal distance from drip-tape line to 20 cm and the depth of 10-20 cm from the soil surface. To determine the appropriate place for soil moisture sampling, the development of root system and the maximum concentrated root length density in the soil profile extracting the maximal soil moisture should be taken in to account, parallel with the averaged soil moisture.
M. Moradizadeh, K. Shirani,
Volume 23, Issue 4 (winter 2020)
Abstract
Water resources management depends on the precise assessment of water storage and access in each region, as well as environmental interactions of these resources. The man objective of this study was to delineate the potential zones of groundwater storage using FAHP. Mapping and assessment of it required maps of geomorphology, drainage, density, lineament density, slope and vegetation, which were initially prepared as the input layers in FAHP; the appropriate weights were attributed to them based on FAHP. Potential zones of ground water were classified into five classes of poor, average, good, very good and excellent. The number and density of available wells and springs in the study area dealt with the potential of the region for groundwater storage. So, ROC was used to assess the validation of results, considering spring points as signs of water resources. According to the results, classes of very good, good, average, weak, and very weak were ranked as the first to the last in terms of privilege order with an area of 37.7, 55, 40, 107, and 98.4 square kilometers, respectively.
Z. Moradi, E. Solgi,
Volume 23, Issue 4 (winter 2020)
Abstract
Sediments are the sink where various contaminants accumulate; they are an inseparable component of ecosystems; among heavy metals are very important because of their harmful effects on the ecosystems and their long extremely long persistency. The present study was conducted to determine the concentration and contamination degree of heavy metals (Iron, Zinc, Copper, Manganese and Nickel) in the coastal sediments of Bushehr Port. In order to sampling sediments, a distance of 10 km was considered. Acid digestion method was used to prepare the samples for metal analysis. Also, the physical properties of the sediments were measured using the standard methods. The metal enrichment and contamination status in the sediments were determined using the contamination degree (Cd), the modified degree of contamination (mCd), the contamination factor (CF), the enrichment factor (EF), and the geoaccumulation index (Igeo). Based on the results, the distribution of heavy metals in sediments were obtained as Ni Fe> Mn > Zn > Cu >. In the present study, due to the distance between Asalouyeh and Bushehr port, a low nickel concentration was obtained. The results of Igeo and other indices showed that the surface sediments of the study were uncontaminated. Comparison of heavy metals in Bushehr Port sediments with sediment quality standards showed that the concentration of metals in this study was less than the standard levels. As a result, the Coastline of Bushehr port was not contaminatied with iron, zinc, copper, manganese, and nickel metals. The study, therefore, indicated that although there were slight changes in these indices, the combination of the indices could give us a comprehensive cognition of heavy metals risks in the surface sediments of the Bushehr Port.
F. Moradian, N. Ghanavat, A. Nazarpour,
Volume 24, Issue 3 (Fall 2020)
Abstract
Dusts contain heavy metals such as Pb, Zn, Cu, Cr, Cd and As that can threat human's health and environment. Therefore, the spatial distribution of heavy metals concentration and soil pollution monitoring and environmental quality protection seem to be essential. To assess heavy metals pollution level in Ahvaz street dust, 115 street dust samples were collected from main pedestrians. The samples were analyzed by Atomic Absorption (AAS). The pollution level was estimated based on the geo-accumulation index (Igeo), contamination factor (CF) and the enrichment factor (EF). The average concentration values of Pb, Zn, Cu, Cr, Cd and As were found to be 197.6, 150.1, 179.7, 101, 5.6 and 14.2 mg/kg, respectively. Pearson's correlation coefficient also indicated that Pb, Zn, Cu and Cr had a significant correlation showing similar possible anthropogenic sources. On the other hand, Cd and As showed a lower correlation with other metals, indicating that they belonged to the geogenic sources. The results of contamination factor, enrichment factor and geo-accumulation index also indicated that Pb, Zn, Cu and Cd had a high contamination level. Also, areas with high population density, heavy traffic volume, and industrial activities exhibited a high level of heavy metals contamination.
E. Moradi, D. Namdar Khojasteh,
Volume 24, Issue 4 (Winter 2021)
Abstract
Wind erosion is one of the environmental problems worldwide, particularly in arid and semi-arid areas of Iran. Different methods and models have been proposed to measure and monitor wind erosion in the recent years. One of the accurate models for measuring f wind erosion is the USEPA model. The purpose of this study was to evaluate the quantification of wind erosion with the USEPA model and the comparison of different interpolation methods for drowsing high-precision soil erosion mapping. For this purpose, 50 samples from 0-30 depth were taken from the study area. Based on the analysis of the physical properties of the soil, including the distribution of the primary and secondary particle sizes, climatic parameters such as evaporation and transpiration, rainfall, wind speed and also, the vegetation and topography characteristics of the area, the erosion rates of Q, Q30 and Q50 were measured. Interpolation methods including general kriging, IDW, LPI and RBF were compared. The results showed that the highest erosion emission rate of Q50 was 39 ton ha-1. The highest and lowest erosion rates for the Q30 index were 0.060 and 2.694 ton ha-1, respectively; for the Q index, the highest and lowest erosion rates were 0.009 and 0.055 ton ha-1, respectively. The results also showed that the IDW method for the Q50 index with the minimum error rate (RMSE) values of 3.94 and the mean absolute error (MAE) with the valueof 1.89 had the best performance among the studied models. The LPI model Q had the best performance with the lowest error (0.0086) and absolute absolute error (0.0021).
M. Abedinzadeh, A. Bakhshandeh, Mr B. Andarziyan, Mr S. Jafari, M Moradi Telavat,
Volume 25, Issue 3 (Fall 2021)
Abstract
Iran is located in the dry belt of the earth and is predicted to face water stress in the next half-century. Currently, the area of sugarcane cultivation in Khuzestan is over 85,000 hectares and due to the high water needs of sugarcane and drought conditions, optimization of water consumption and irrigation management is necessary to continue production. Therefore, in this study, the values of soil moisture, canopy cover, biomass yield in five treatments and irrigation levels (start of irrigation at 40%, 50%, 60%, 70%, and 80% soil moisture discharge) during 2 planting dates in the crop year 2015-2016 on sugarcane cultivar CP69-1062 in Amirkabir sugarcane cultivation and industry located in the south of Khuzestan was simulated by AquaCrop model. The measured data on the first culture date (D1) and the second culture date (D2) were used to calibrate and validate the model. The results of NRMSE statistics in canopy cover simulation in calibration and validation sets with values of 2.1 to 15.6% and 3.8 to 18.3%, respectively, and in biomass simulation with values of 6.2 to 15.2%, and 9.5 to 12.6%, respectively and coefficient of determination (R2), range 0.98 to 0.99 indicated that the high ability of the AquaCrop model in simulation canopy cover and biomass yield. whereas, the values of NRMSE of soil depth moisture in the calibration and validation sets ranged from 11.6 to 23.8, and 12.2 to 22.7, respectively, with a coefficient of determination (R2), 0.73 to 0.96 (calibration) 0.8 to 0.93 (validation) showed less accuracy of the model in the simulation. The best scenario is related to the third proposal that water consumption, water use efficiency, and yield are 1710 mm, 1.53, and 42.27 tons per hectare, respectively, which shows a reduction in water consumption of 360 mm.
N. Moradian Paik, S. Jafari,
Volume 26, Issue 4 (Winiter 2023)
Abstract
Changes in land quality factors were investigated according to the change in land use of two conventional cropping systems in Khuzestan (Dimcheh region, periodic cultivation system, sugarcane, forest, and deforesting in Zaras region). The results showed that by the change of forest land use, organic carbon from 0.93 to 0.55%, cation exchange capacity (CEC) from 19.6 to 13.3 cmol/kg, C/N from 7.4 to 3.8%, the mean weight diameter of aggregate (MWD) from 1.7 to 1.3%, and microbial respiration from 0.11 to 0.06 mg of CO2 /gr of soil per day decreased and in contrast, the dispersible clay from 4.6 to 19.3% increased. PCA analysis for the parameters showed that five factors justified more than 90% of the variance in the values of FC, PWP, AW, and AF. In the Dimcheh region, the average volumetric moisture content of FC from 31.3% to 27.3%, available water from 12.9% to 9.8%, dispersible clay from 56.1% to 12.3%, and bulk density reduced from 1.6 to 1.4%, organic carbon from 0.45 to 0.78%, C/N from 6.3 to 10.0%, microbial respiration from 0.01 to 0.04 mg of CO2 /gr soil per day and MWD of aggregates increased from 0.77 to 1.3 mm. Five factors including FC, AW, BD, DC, and OM explained more than 90% of the variance.
V. Moradinasab, S. Hojati, A. Landi, A. Faz Cano,
Volume 27, Issue 2 (Summer 2023)
Abstract
Parent material and topography are among the soil-forming factors that affect soil evolution by influencing different parameters. This study was conducted to compare the effect of marl and calcareous parent materials in different slope positions, including the summit, shoulder, foot-, and toe-slopes on soil clay mineralogy in the Karoon 3 Basin, east of Khuzestan Province. Four soil profiles in each of the two topo-sequences were dug. They were sampled based on their genetic horizons and some physical, chemical properties, and clay mineralogy were measured. The results showed that the type and abundance of clay minerals identified for both parent materials were more affected by topo-sequence position. The composition of minerals identified in the topo-sequence with marl parent materials included kaolinite, palygorskite, smectite, chlorite, mica, and quartz, and in the topo-sequence with calcareous parent materials, palygorskite, smectite, chlorite, mica minerals, and quartz, and most of the identified minerals were also observed in all positions in the C horizon. However, in marl parent materials kaolinite, and calcareous parent materials, smectite seems to have been formed pedogenically. The result of the association between Weaver and Beck indicated that most of the clay minerals are in the equilibrium of Palygorskite.
