Showing 1096 results for Ro
M. Khoshoei, H.r. Safavi, Abbas Kazemi,
Volume 27, Issue 1 (5-2023)
Abstract
Drought is a continuous period of lack of rainfall that leads to damage to a variety of water consumers, especially in the agricultural sector and reduces their yield. Drought is considered one of the unpredictable disasters. Drought is different from other natural disasters such as floods, earthquakes, storms, etc. Based on the type of meteorological, hydrological, or agricultural droughts, various indices are designed to assess droughts such as SPI, PDSI, and SWSI. The objective of this study is to evaluate an integrated index that includes the main causes of drought. The integrated index includes various drought factors such as meteorological, hydrological, agricultural, socio-economic, and environmental. Isfahan province has been selected as a case study due to successive droughts in recent decades. A combination of static and dynamic layers has been used for designing the integrated index. Static layers include land use, slope, and soil type of the basin. Dynamic layers include precipitation, average temperature, available surface water, available groundwater, groundwater quality, and cultivated area. The results showed that the highest water stress occurred in the 1386 and 1391 years in the province and the lowest water stress and wet season in different parts of the province in 1387 and 1390 years.
M. Dehghanian, H. Tabatabaee, H. Shirani, F. Nikookhah,
Volume 27, Issue 1 (5-2023)
Abstract
In sustainable agriculture, cow manure is used for greater productivity, a rich source of E-Coli pathogenic bacteria. The objective of this research was to investigate the simultaneous effect of the fractionation size of cattle manure and irrigation water salinity on the retention of E-Coli bacteria in the depths of the sand column with a height of 10 cm under saturated flow. Four different particle fractions of cow manure (1-2, 0.5-1, 0.25-0.5, and smaller than 0.25 mm) were added to the surface of the sand column at the scale of 30 tons per hectare, then leaching was done with different salinities (0, 0.5, 2.5, 5, and 10 dS/m) up to 10 pore volumes, then samples were taken from the depths of 0, 3, 6, and 12 cm. The number of bacteria in each sample was determined by the live counting method. The results showed that the effect of all sources of change and their interaction effects on the retention of bacteria in the soil is significant at the level of 5%. Salinity had a negative effect on the retention of bacteria, and the highest and lowest values of the relative concentration of bacteria (the result of dividing the number of bacteria in each soil depth by the initial number of bacteria in the desired manure treatment) were in 0 dS/m and 10 dS/m salinity of leaching water, respectively. By decreasing the size of cow manure particles due to the increase in hydrophobicity and blocking of preferential pores, the retention of bacteria decreased in all investigated soil depths. The highest and lowest retention of bacteria in the soil were investigated in the largest cow manure particle size (1-2 mm) and the smallest cow manure particle size (less than 0.25 mm), respectively. In addition, the highest relative concentration of bacteria in the soil was seen in the depth of 0-3 cm, and no significant difference was seen in other soil depths.
S. Yaghobi, Ch.b. Komaki, M. Hosseinalizadeh, A. Najafinejad, H.r. Pourghasemi, M. Faramarzi,
Volume 27, Issue 1 (5-2023)
Abstract
Frequency analysis of daily rainfall or return period of rainfall and flooding events is very important considering the behavioral complexity in water resources management; because ignoring it can lead to urban destructive floods. In the present research, three distribution functions of Pearson, Beta, and Gamma were compared to investigate and select the most appropriate distribution function for the precipitation data acquired from meteorology stations and CHIRPS satellite in seven stations in the watershed of Bustan Dam. Statistical analyses showed that satellite data were ineffective to estimate daily precipitation due to high errors in RMSE, MAD, and NASH. Meteorological data were used to spot the best distribution. Google Earth Engine and Python programming language were used. Then, the selected distribution function was used to determine the maximum daily rainfall, frequency probability, and return period of 2, 10, 50, 100, and 200 years. The results of the goodness of fit test, Error Sum of Squares, Bayesian Information Criterion, Akaike Information Criteria well as Kullback-Leibler Divergence showed that in five stations of Kalaleh, Qarnaq, Golestan National Park, Golestan Dam, and Glidagh, the Pearson function is the most suitable distribution function. Also, in the other two stations (Gonbad and Tamar), the Beta function was recognized as a suitable function. However, Gamma distribution in the study area is not efficient. So, it can be concluded that heavy and irregular rainfall can be effective in choosing the best distribution function at each station. Therefore, it is recommended to consider the maximum possible rainfall and as a result of the possible occurrence of floods with principled and accurate management to prevent human and financial losses in susceptible areas, especially in the study area.
M. Ahmadi, H. Ramezani Etedali, A. Kaviai, A.r. Tavakkoli,
Volume 27, Issue 1 (5-2023)
Abstract
Studying the effects of drought in mountainous areas is facing problems due to the inappropriate distribution of stations, the lack of long-term data, and areas lacking statistics. Therefore, the main objective of this research was to investigate the drought indices of Kurdistan province using TRMM satellite data and ECMWF dataset, as well as to evaluate their accuracy against the data of land stations in Kurdistan province. First, ECMWF precipitation data for the 2000-2020 period and TRMM precipitation data for the 2000-2019 period were obtained and evaluated using RMSE, MBE, and correlation coefficient statistics. Spearman's correlation coefficient showed a significant relationship between the TRMM satellite precipitation data and the ECMWF dataset with ground stations at the 5% level, and the value of this coefficient was between 0.95-0.85. According to the results, it can be acknowledged that the TRMM satellite rainfall and ECMWF dataset in the monthly time scale had proper accuracy at the Kurdistan province level. Therefore, these two sources were used to examine the drought indices. SPI, SPEI, and ZSI drought indices were calculated in different monthly periods (1-48), PNI in different monthly, seasonal, and annual periods in Kurdistan province (Saqqez, Qorveh, Bijar, Sanandaj stations). Spearman's correlation coefficient indicated a significant relationship at the 5% level between the SPI, ZSI, PNI, and SPEI index of the ECMWF dataset with ground stations. The results of the SPI index showed that the lowest RMSE value for the TRMM satellite at the Saqqez station and the three months was equal to 0.45, and for the ECMWF dataset at the Sanandaj station and the 24 months was equal to 0.35.
F. Meskini-Vishkaee, A. Tafteh, M. Goosheh,
Volume 27, Issue 1 (5-2023)
Abstract
Salinity and water scarcity are limiting factors for sustainable agricultural production. The cultivation of resistant plants to environmental stresses is one of the important management factors for sustainable production. The objective of this study was to determine the water requirement and plant response coefficients to water deficit stress (Ky) in different growth stages under the Khuzestan province climate. This study was performed on the quinoa cultivar Titicaca in Ahvaz City in 2019 in a randomized complete block design with 13 treatments and three replications. Treatments include full irrigation and application of three levels of water deficit stress (30, 50, and 70% of allowable soil moisture depletion) at four different stages of plant growth. The duration of the initial, developmental, middle, and late growth stages of quinoa was 24, 28, 32, and 18 days, respectively (total growth period=102 days). The highest quinoa yield was obtained in full irrigation treatment (3700 kg ha-1) with a water requirement of 312 mm. Plant response coefficient to water deficit stress in the initial, developmental, middle, and late stages were 0.8, 0.65, 0.74, and 0.47, respectively. Although quinoa is a drought-resistance plant, it should be noted that the water stress in the two initial and middle stages (quinoa sensitive growth stages to water stress) reduces the quinoa yield significantly that should be considered in the planning of deficit irrigation.
F. Esmaeili, M. Vafakhah, V. Moosavi,
Volume 27, Issue 1 (5-2023)
Abstract
Digital elevation models (DEMs) are one of the most important data required in watershed modeling with hydrological models and their spatial resolution has a significant impact on the accuracy of simulating hydrological processes. In the present study, the effect of spatial resolution of five DEMs derived from the topographic map (TOPO) with a scale of 1:25000, ALOS PALSAR, ASTER, SRTM, and GTOPO with a spatial accuracy of 10, 12.5, 30, 90, and 1000 m, respectively, on the estimation of parameters of geomorphological and geomorphoclimatic unit hydrographs models has been evaluated in Amameh watershed. Thirty-four single flood events were used during the years 1970 to 2015. The results showed that in the GUH method, the application of the TOPO and ALOS PALSAR DEMs had the best results with root mean square error (RMSE) of 1.7 and 1.8 m3/s and Nash-Sutcliffe Efficiency (NSE) of 0.4 and 0.3, respectively. While the GTOPO DEM had the least efficiency with RMSE of 2.8 m3/s and NSE of -2. Similarly, the lowest and highest RMSE in the GCUH method belonged to TOPO and GTOPO DEMs with RMSE of 3.8 and 18 m3/s and NSE of 0.2 and -6, respectively. Generally, the GUH method had more favorable results than the GCUH method in all DEMs.
Sh. Shahmansouri, M.r. Mosaddeghi, H. Shariatmadari,
Volume 27, Issue 1 (5-2023)
Abstract
According to the rapid population growth, the challenging issue of production of economic and suitable food sources has led to greater attention to soilless culture greenhouse production systems. Components of growth media in horticulture are usually selected based on physical and chemical properties and their abilities in providing enough water and oxygen for roots. This study was conducted to investigate the feasibility of using some agricultural wastes (i.e., sawdust and wheat straw) and three rockwool types (i.e., raw, ground, ground, and sieved) as substitutes for commercial greenhouse growing media such as cocopeat and perlite. Several hydraulic, aeration, and chemical properties including easily available water (EAW), air after irrigation (AIR), water holding capacity (WHC), water buffering capacity (WBC), saturated water content (θs), bulk density (BD), total porosity (TP), water drop penetration time (WDPT), pH, and electrical conductivity (EC) were measured and scored in the growth media. Raw rockwool had larger particles compared to ground rockwool, which resulted in its faster water release. Processing of the rockwool decreased the saturated water content and saturated hydraulic conductivity due to the decrease in particle size. Four growth media were scored as very good and one was scored as good. The highest and lowest scores belonged to sawdust (34) and ground rockwool (30), respectively. The studied growth media with high TP, EAW, and WHC and low BD, EC, and WDPT can be used individually or combined with other commercial substrates for greenhouse growth media.
S. Salehi, A. Mahmoodi Moghadam,
Volume 27, Issue 2 (9-2023)
Abstract
The present study investigated the related parameters to decrease the seepage through homogenous and heterogeneous earth dams by employing experimental models and solutions. Two heterogeneous earth dam models with vertical clay cores were considered to illustrate the effect of the electrokinetic application on the time failure factor. The seepage lines were measured along the longitudinal section from the heel to the toe using the observation wells by adjusting the electrodes of the electrokinetic application through the vertical clay core. The initial comparison expounds that adjusting the electrokinetic approach can decrease the level of the seepage line due to depleting water by considering horizontal drainage. Furthermore, the failure time was increased by 18 percent due to inputting the voltage in the clay content. The results indicated that the models with an electrokinetic approach were stabilized more than the ones. The hydrographs of the flow discharge were measured along the experimental tests to investigate the effect of electrokinetics with and without electrodes in 10 and 20 clay percent of the dam soil content. Results indicated that employing the electrokinetic application due to increasing clay content caused the effect of the electrokinetic was significantly increased and it caused the discharge flow reduced of 32 percent.
A.r. Eftekhari, M. Mirmohammad Sadeghi, A. Jalalian,
Volume 27, Issue 2 (9-2023)
Abstract
The use of biotechnology-based methods in the field of geotechnical engineering has led to the birth of new knowledge of biogeotechnology and several studies have been conducted using this new knowledge in various geotechnical issues including reducing permeability and increasing shear strength, especially in sandy soils and the desired results have been obtained. Nevertheless, little research has been done using biogeotechnology in the field of improving the mechanical properties of clay soils, especially in reducing the swelling of expansive soils, which is considered one of the types of problematic soils. The main cause of swelling of expansive soils is the presence of montmorillonite clays in these types of soils. Using chemical additives to stabilize expansive soils such as lime and cement is a common practice. However, environmental concerns related to greenhouse gas production caused by the production of chemical substances and the destructive effects of these substances on the environment and soils have encouraged researchers to use other sustainable stabilization alternatives. Microbial Induced Carbonate Precipitation (MICP) is a technique that can be a promising solution to solve this problem. The objective of the present study was to investigate the effect of the MICP method on the swelling of expansive clay soils and its effect on the mechanical strength of this type of soil. One-dimensional swelling tests, uniaxial compressive strength tests, and Atterberg limits tests were performed on clay soil with a liquid limit of 53 using Sporosarcina pasteurii bacteria, calcium chloride, and urea as nutrients. Taguchi's method was used for the design of the experiments and the statistical analysis of the results. This method designs experiments through partial factorial and reduces their number without a significant effect on the results. Bacterial concentration, nutrient molarity ratio, treatment time, and soil moisture were selected as four factors with Four levels of variation. The results showed that the (MICP) method was effective in reducing the swelling potential of expansive soils and also caused a significant increase in the unconfined compressive strength of the soil and its undrained shear strength.
M. Paritaghinezhad, H.r. Kamali, S. Jamshidi, M. Abdolahipour,
Volume 27, Issue 2 (9-2023)
Abstract
According to the effects of climate change on evapotranspiration and using of water resources, climate change prediction is vital due to water resources management improvement and decreasing damages of drought. The first rank of mango production in Iran belonged to Hormozgan province and the most amount of mango produced in Minab plain. In the present study, the amount of evapotranspiration of mango plants was calculated with FAO Penman-Monteith from 1985 to 2020 using meteorological data at Minab station. The evapotranspiration values of the plant were estimated from 2021 to 2100 with two optimistic and pessimistic scenarios using the last version of CMIP (CMIP6), atmospheric-ocean general circulation models, and performing statistical deviation corrections by the Python software. The results showed that the values of annual evapotranspiration will increase by 0.31 and 1.23 mm on average in the optimistic and pessimistic scenario, respectively in the future due to the increase in annual temperature.
Z. Feizi, A. Ranjbar Fordoee, A.r. Shakeri,
Volume 27, Issue 2 (9-2023)
Abstract
Maintaining soil structure and stability is essential, especially in arid and semi-arid regions with poor soil structural stability. Destruction of soil and its crust can cause wind erosion and desertification. The objective of this study was to investigate the effect of using hydrogel nanocomposite mulch on the stabilization of sand surfaces. A wind tunnel test was used to evaluate the erodibility of samples treated with different amounts of hydrogel nanocomposite. The compressive strength of the samples was measured by a manual penetrometer. The prepared nanocomposites were examined using scanning electron microscopy (FE-SEM), infrared spectroscopy (FTIR), and X-ray diffraction (XRD) images. The results of the wind tunnel showed that the addition of hydrogel nanocomposite to the samples improved the soil erosion rate by 100% at a speed of 15 m/s compared to the control sample. Bonding between sand particles by spraying hydrogel nanocomposites improves the erodibility of sand. Measurement of mechanical strength of treated samples after 30 days showed that the resistance of the crust increased with increasing the amount of nanocellulose in the composite, which can be expressed due to the increased surface area of the nanoparticle and the possibility of further bonding of the nanocomposite polymer bed with sand particles. While the crust diameter showed no significant difference with increasing concentration and the sample treated with nanocomposites containing 3% nanoparticles was thicker compared to other samples.
H. Jafarinia, A. Shabani, S. Safirzadeh, M.j Amiri,
Volume 27, Issue 2 (9-2023)
Abstract
Due to the climatic conditions of Iran, increasing water scarcity, and the effect of drought stress on the efficiency of irrigation water consumption and chemical fertilizers application, an experiment was conducted to investigate the effect of irrigation intervals (6, 9, and 12-day intervals), different levels of nitrogen fertilizer (200, 300, and 400 kg urea per hectare) and cultivation methods (on-ridge or heeling up and in-furrow) on yield and productivity of sugarcane as a factorial design based on randomized complete block design in 3 replications at Hakim Farabi Agro-Industry Company in Khuzestan province. The results showed that the maximum (106.73 tons/ha) and minimum (59.10 tons/ha) sugarcane yields were observed in 9-day and 12-day irrigation intervals, respectively. Also, the highest sugarcane yield (99.89 tons per hectare) was obtained in the treatment of 400 kg urea per hectare and the in-furrow planting method resulted in a higher yield compared to the on-ridge planting method. The highest water productivity in sugarcane stem yield and sugar production with 3.55 and 0.34 kg per cubic meter of applied water, respectively, was obtained in a 9-day irrigation interval. A significant increase in water use efficiency in sugarcane stem yield was observed in 400 kg urea/ha compared to the other two fertilizer levels. However, there was no significant difference in water productivity of sugar yield between different fertilizer treatments. The results showed that 6 and 9-day irrigation intervals in most of the studied traits were not significantly different. Therefore, using a 9-day irrigation interval is suggested in the studied area when the sugarcane cultivation area is high and the amount of available water is limited. In-furrow planting method can also be effective in reducing water consumption. Therefore, deficit irrigation and proper nitrogen fertilizer consumption can be very effective in sugarcane cultivation.
E. Taheri, F. Mousavi, H. Karami,
Volume 27, Issue 2 (9-2023)
Abstract
One of the basic steps in water resources management and planning according to population increase and lack of water resources in Iran is to optimize the use of dam reservoirs. In this research, the effect of meteorological droughts on the optimization of the Aydoghmoush dam reservoir in the northwest of Iran was evaluated by applying metaheuristic algorithms under the impact of future climate change. Three models and two scenarios of SSP2-4.5 and SSP2-8.5 of the sixth IPCC report, and the LARS-WG downscaling model were used for Aydoghmoush dam weather station for the base period (1978-2014) and future periods of 2022-2040 and 2070-2100. The inflow and outflow of the dam, as well as the optimal utilization of the dam reservoir, were evaluated using standalone, and hybrid mode of genetic, slime mold, and ant colony algorithms. Results of the best release scenario (SSP2-8.5) showed that the annual rainfall in the future periods will decrease by 8.9 mm, and 14.5 mm, respectively, compared to the base period. The objective function of optimizing the use of the dam reservoir was defined as minimizing the sum of squared relative deficiencies in each month and maximizing the reliability in the statistical period of 2011-2021. The results showed that in terms of time reliability, vulnerability, and stability, the hybrid slime mold-genetic algorithm was better than other algorithms with values of 0.73, 0.32, and 28.78. Prediction of the dam's inflow and outflow using the hybrid slime mold-genetic algorithm indicated high accuracy compared to other models by 13% and 19% errors, respectively.
A.r. Tavakoli, M. Basirat,
Volume 27, Issue 2 (9-2023)
Abstract
Shifting of surface irrigation to drip system is key tool to reduce water saving. Due to the soil moisture profile variation of the drip irrigation; water distributed of the root zone is not uniform. Moreover, moisture deficit and inefficient fertilizing in drip system due to unavailability in deeper layers of soils is one of the disadvantages of drip system in pistachio orchards with depth root systems. An experiment was carried out by adjusted subsurface drip irrigation (SSDIadj) system in pistachio of Damghan region (Semnan province) in a randomized complete block design with split plot arrangement in three replications for three years. The potassium fertilizer amounts (Fertigation) at three levels (50, 70, and 100% of requirement) were considered as the main plot and the design of conductor tubes of the SSDIadj system in seven levels as sub plots. The irrigation guide tubes were arranged for sand tube irrigation in (control), 40-40-40-40, 40-40- 50-50, 40-40-60-60, 40-40-50-60, 40-40-50-70, and 40-40-50-80. Meteorological data from the nearest meteorological station was collected and analyzed. Yield, water consumption, irrigation water productivity index and growth conditions of ShahPasand pistachio cultivar were determined in different treatments. Data were analyzed using Genstat-12 software and based on the analysis of surplus costs and aerial data, the best treatment including combination of potassium fertilizer and arranged tubes of SSDIadj system was determined. The recommended treatments are including of full irrigation, full potassium fertilizer and guide tubes 40-40-50-70 and or 40-40-50-80. The treatments with stratified conductive tubes in the optimal distribution of water, improving productivity and reducing inefficient consumption water. In addition, there are no restrictions on subsurface irrigation such as root accumulation, root penetration into pores of drippers and as well as accumulation of salts.
D. Khatibi Roudbarsara, A. Khaledi Darvishan, J. Alavi,
Volume 27, Issue 2 (9-2023)
Abstract
Soil erosion followed by sediment production is the most important phenomenon that causes soil and environment degradation in many areas and is increasing. Sediment fingerprinting is a method to identify sediment sources and determine the contribution of each source to sediment production. The present research was carried out to evaluate the relative erosion sensitivity of lithological units and to determine the contribution of each unit in bed sediment production using geochemical properties in the Vaz River located in Mazandaran province. The 33 soil samples were taken from the whole watershed and one sediment sample at the outlet of the watershed. Then, five tracers of B, Al, Sc, Mo, and Sn were selected as the optimal combination using three statistical tests range tests, Kruskal-Wallis, and discriminant function analysis. Finally, using optimal tracers and a combined multivariate model, the contribution of lithological units with very high (A), high (B), medium to high (C), and medium (D) sensitivity in bed sediment production were obtained using FingerPro statistical package and R software. The results showed that the contribution of lithological units with very high (A), high (B), medium to high (C), and medium (D) sensitivity in bed sediment production were 24.23, 50.77, 15.62, and 9.36%, respectively. Then, the specific contribution of each sensitivity class was also calculated to remove the effect of area on the results. The Qal lithological unit including the Quaternary sediments in the river bed and banks with very high sensitivity to erosion (A) and a specific contribution of 0.0807 % per hectare had the maximum contribution in bed sediment production in Vaz River.
Y. Gateazadeh, H.a. Kashkuli, D. Khodadadi Dehkordi, A. Mokhtaran, A. Assareh,
Volume 27, Issue 2 (9-2023)
Abstract
To monitor and compare the changes of salts in the soil profile around the roots of the corn plant, the plant yield, and the productivity of corn water, an Experimental was conducted in a completely randomized block of three repetitions in two crop years 2017-2018 and 2018-2019 at Ahvaz Agricultural Research Station. Experimental treatments included two subsurface drip irrigation systems with a working depth of 30 cm from the soil surface and tape irrigation and two irrigation intervals of 2 and 4 days. The results of monitoring soil solutes obtained from sampling depths (0-25, 25-50, and 75-50 cm) showed that soil salinity in the second year in both systems as a result of improving the quality of irrigation water from 3.61 dS/m to 2.01 dS/m, it was reduced by two times. The results of soil salinity monitoring showed the highest ratio of salinity reduction with a 2-day irrigation interval in both irrigation systems. The most leaching was done at the irrigation depth of 25-50 cm in the subsurface drip irrigation system and at the depth of 0-25 cm in the tape system. The highest yield of corn dry fodder was 9.13 and 7.13 tons per hectare, respectively, and the best water efficiency based on dry corn fodder at the rate of 13.74 kg/m was obtained in the strip drip irrigation system (tape) with a two-day irrigation interval and in the second crop year. Also, the results of the soil salinity measurement showed that the implementation and exploitation of the drip irrigation system can be the basis for improving the quality of the soil as the most important non-renewable resource of agriculture.
N. Pourabdollah, M. Heidarpour, Jahangir Abedi-Koupai,
Volume 27, Issue 3 (12-2023)
Abstract
Hydraulic jump is used for dissipation of kinetic energy downstream of hydraulic structures such as spillways, chutes, and gates. In the present study, the experimental measurements and numerical simulation of the free hydraulic jump by applying Flow-3D software in six different conditions of adverse slope, roughness, and positive step were compared. It should be noted that two turbulence models including k-ε and RNG were used for numerical simulation. Based on the results, simulation accuracy using the RNG model was more than the k-ε model. The statistical indices of NRMSE, ME, NS, and R2 for comparing the water surface profile were obtained at 34.3, 0.0052, 0.995, and 983 for the application of the RNG model, respectively. Also, using the RNG model, the values of these indices for the velocity profile were obtained at 14.92, 0.127, 0.9982, and 962, respectively. In general, the error of the simulated water surface and velocity profile were obtained at 5.31 and 12.4 percent, respectively. Moreover, the maximum error of the numerical simulation results of D2/D1, Lj/D2, and Lr/D1 was ±12, ±12, and 16%, respectively. Therefore, the use of Flow-3D software with the application of the RNG turbulence model is recommended for numerical simulation of the hydraulic jump in different situations.
F. Meskini-Vishkaee, A.r. Jafarnejhadi, M. Goosheh, B. Delsooz Khaki, M. Javadzadeh,
Volume 27, Issue 3 (12-2023)
Abstract
One of the most common approaches for farm irrigation management is using soil readily available water and allowable depletion coefficient. The objective of this study was to determine wheat crop response coefficients, critical moisture content, and soil allowable depletion coefficient using a physically based method in three dominant soils under wheat cultivation in Khuzestan province. Treatments included full irrigation and water stress at three levels low, moderate, and high. The highest and lowest values of wheat crop response coefficient were related to silty clay loam (Ky=1.26) and clay loam (Ky=0.96), respectively. Critical soil moisture content was observed in loam soil (0.25 cm3cm-3)> silty clay loam (0.23 cm3cm-3)> clay loam (0.22 cm3cm-3), respectively. Despite the higher critical moisture content in loam, the most soil allowable depletion coefficient was also calculated in loam (0.54). Soil allowable depletion coefficient in silty clay loam and clay loam were 0.44 and 0.42, respectively. The results confirmed the simultaneous effects of soil and plant properties on the availability of soil water for the plants.
S. Azadi, H. Nozari, S. Marofi, B. Ghanbarian,
Volume 27, Issue 3 (12-2023)
Abstract
One of the strategies for agricultural development is the optimal use of irrigation and drainage networks, which will lead to higher productivity and environmental protection. The present study used the system dynamics approach to develop a model for simulating the cultivated area of the Shahid Chamran irrigation and drainage network located in Khuzestan province by considering environmental issues. Limit test and sensitivity analysis were used for model validation. The results showed the proper performance of the model and the logical relationship between its parameters. Also, the cropping pattern of the network was determined in two modes of non-stepwise and stepwise changes to determine the optimal cultivated area of the Shahid Chamran network with environmental objectives and minimize the amount of salt from drains. The results showed that the amount of optimized output salt from the network has decreased in both non-stepwise and stepwise changes compared to the existing situation in the region. The total output salt in the current situation, from 2013 to 2017, was obtained at 2799, 2649, 2749, 2298, and 2004 tons.day-1, respectively, in the stepwise changes, are 2739, 2546, 2644, 2223, and 1952 tons.day-1, and finally, in the non-stepwise changes, are 2363, 2309, 2481, 2151, and 1912 tons.day-1. The results showed that the non-stepwise changes due to considered limitations have been more successful in reducing output salt than the stepwise changes. The analysis of the results showed the model's success in optimizing and achieving the desired goals. The results showed that the present model has good accuracy in simulating and optimizing the irrigation network, cropping pattern, and defining other scenarios.
S. Afshari, H. Yazdian, A. Rezaei,
Volume 27, Issue 3 (12-2023)
Abstract
Awareness of the types of vegetation changes and human activities in different parts has particular importance as basic information for different planning. It is very difficult and expensive to collect information about the continuous changes in vegetation cover by conventional methods. Therefore, the use of new technologies such as remote sensing is very beneficial. The objective of the present research was to introduce the appropriate vegetation index and determine the vegetation cover of the Abshar network. NDVI, EVI, SAVI, and MSAVI vegetation indices were calculated from 2000 to 2021 every year and monthly in the Google Earth Engine system using Landsat 7 satellite images of the ETM+ sensor. Also, the SPI drought index was calculated using the precipitation statistics of Kohrang station in Excel software. The results of the comparison of four indices showed the superiority and higher performance of NDVI compared to the other three indices for detecting vegetation changes. Then, vegetation changes were calculated. The results showed that the trend of agricultural development in the Abshar network is downward and has a direct relationship with precipitation and the SPI drought index. Also, the results indicated that the SPI drought index was equal to -1.73in 2008, which showed a severe drought in the region. Comparing these results with the vegetation area showed that the vegetation area was 35721 hectares in this year and the year after the drought (2009), the vegetation area was 22950 hectares. Therefore, there was a decrease in precipitation and a sharp decrease in the SPI index in 2008, which led to a sharp decrease of 35% in the vegetation area in 2009.
