Showing 28 results for Mosaddeghi
F. Hosseini, M. R. Mosaddeghi, M. A. Hajabbasi, M. R. Sabzalian, M. Soleimani, M. Sepehri,
Volume 21, Issue 2 (Summer 2017)
Abstract
Soil water repellency can affect several soil properties such as aggregate stability. Soil texture and organic matter are two main internal factors responsible for the variability of soil water repellency. Major sources of organic matter in soil include plant residues, and exudates of plant roots and soil microorganisms. Tall fescue (Festuca arundinacea Schreb.) as an important cool-season perennial forage grass is usually infected by a fungal endophyte (Epichloë coenophiala) which often enhances resistance to biotic and abiotic stresses as well as altering the litter decomposition rate and soil properties. In this study, the effects of endophyte-infected (E+) and endophyte-free (E−) tall fescue residues (in three different levels of 0, 1 and 2%) on soil organic carbon, basal microbial respiration, water-dispersible clay and water repellency index (determined by intrinsic sorptivity method) were investigated in four texturally-different soils in the laboratory. E+ and E− tall fescue residues were completely mixed with moist soil samples and then were incubated at 25 °C. During two months of incubation period, the amended soil samples were subjected to 10 wetting and drying cycles and then, the above-mentioned soil properties were measured. The results indicated that soil organic carbon and water-dispersible clay were greater, while basal soil respiration and repellency index were lower in fine-textured soils. Water repellency index was increased by production of hydrophobic substances (for the rate of 1%) and was reduced by induced greater soil porosity (for the rate of 2%). Presence of endophyte in plant residues had no significant effect on water sorptivity, ethanol sorptivity and water repellency index; nevertheless, E+ residues increased soil organic carbon and decreased water-dispersible clay significantly. Overall, it is concluded that tall fescue residues, especially those with E+, can improve soil physical quality due to improving soil organic carbon storage and water repellency index and decreasing water-dispersible clay (as an index for aggregate instability). These E+ species and the residues have great potential to be used in sustainable soil conservational managements.
R. Soltani, M. R. Mosaddeghi, M. Ayuni, Sh. Ayoubi, M. Shirvani,
Volume 23, Issue 1 (Spring 2019)
Abstract
Long-term use of treated wastewaters for irrigation adds compounds and/or ions to soils which might alter the soil physical, hydraulic and mechanical properties. Soil mechanical properties are closely linked with the plant growth. This study was conducted to investigate the effect of short-, mid- and long-term applications of the treated wastewater of Mobarake Steel Company in Isfahan on the soil penetration resistance and shear strength in the company green space. Soil penetration resistance and shear strength were measured using a pocket penetrometer and in situ shear box, respectively. The results showed that soil penetration resistance (i.e. soil hardness) at both dry and wet conditions significantly was increased upon short-, mid- and long-term applications of wastewater; 19 years of the application of wastewater resulted in the highest soil penetration resistance at wet condition, but the well water did not significantly affect it. Surface crust in the non-irrigated locations increased the soil penetration resistance, but the irrigated sealed soils were not significantly different from the virgin soil in terms of dry and wet penetration resistances. For the soil shear strength parameters, wastewater, well water and surface crust did not significantly affect soil cohesion (c), they but significantly affected the angle of internal friction (φ). Overall, soil shear strength parameters were not greatly affected by the irrigation water treatments because of the dominant effect of the soil fractions (texture and gravel content) and the microstructure.
Z. Amiri, M. Gheysari, M. R. Mosaddeghi, M. S. Tabatabaei, M. Moradiannezhad,
Volume 23, Issue 2 (Summer 2019)
Abstract
Location of soil moisture sampling in irrigation management is of special importance due to the spatial variability of soil hydraulic characteristics and the development of root system. The objective of this study was determination of the suitable location for soil moisture sampling in drip-tape irrigation management, which is representative of the average moisture in the soil profile (θavg) as well. For this purpose, soil moisture distribution (θij) at the tassel stage of maize and one irrigation interval (68-73 day after plant) were measured at the end of season. The results showed more than 70% length of the root of plant was located in 30 cm of the soil depth. By accepting ±10% error in relation to the averaged soil moisture, some region of soil profile was determined which was in the acceptable error range and also near the averaged soil moisture (0.9θavg<θRec<1.1θavg). By overlapping θRec in one irrigation interval, the appropriate location for soil moisture sampling was the horizontal distance from drip-tape line to 20 cm and the depth of 10-20 cm from the soil surface. To determine the appropriate place for soil moisture sampling, the development of root system and the maximum concentrated root length density in the soil profile extracting the maximal soil moisture should be taken in to account, parallel with the averaged soil moisture.
A. Ebrahimi, M. Shayannejad, M. Reza Mosaddeghi,
Volume 23, Issue 4 (winter 2020)
Abstract
Wetting pattern in a trickle irrigation system is one of the most important characteristics that should be taken into consideration for designing the irrigation systems. Improving the dimensions of the wetting pattern will increase the water use efficiency and irrigation systems. The objective of this study was to investigate the effect of rice husk and its biochar application on the wetting pattern in a silty clay soil under surface trickle irrigation. A box with the length of 200, the width of 50 and the height of 100 cm was used. To easily fill and empty the model, it was filled up to a height of 50 cm. The rice husk and its biochar were added to the soil at the rates of 0, 1 and 2 mass percentages based on a factorial arrangement of the treatments in a completely randomized design with three replications. Biochar was prepared in a special furnace at 500°C without oxygen. The experiments were done with a flow rate of 4 liters per hour with the irrigation time of 3 hours. The results of the analysis of variance showed that the organic treatments increased the soil water content in the range of field capacity to a permanent wilting point; the highest increase was observed for the biochar 2% treated soil. Also, the addition of rice husk and biochar in the silty clay soil reduced the horizontal advance and increased the vertical advance wetting pattern.
M. Khamseh Mahabadi, M. Shirvani, M. R. Mosaddeghi,
Volume 24, Issue 1 (Spring 2020)
Abstract
Shortage of water resources and deterioration of water quality have urged the need to develop new technologies for the removal of contaminants from water. Heavy metals produced by municipal and industrial activities are among the most toxic contaminants present in the natural and waste waters. Different methods have been developed for the elimination of heavy metals from water resources and industrial waste waters. Adsorption is an effective and economic method for the water purification purposes. Nowadays, clays and natural polymers have been widely used as the adsorbents for heavy metals, due to their eco-friendly nature, natural abundance, low cost and high specific surface area. If these adsorbents are used as a hybrid material, some of their physical and chemical restrictions would be alleviated. In this study, polyacrylic acid–bentonite hybrids and natural bentonite were compared in terms of Pb adsorption in the batch and fixed-bed column systems. Besides, the effect of pH on Pb retention was investigated in both systems. The results of the batch studies showed that Langmuir and Freundlich isotherm models were appropriate in ing quilibrium Pb sorption data. Pb sorption by the sorbents was increased with the rise in solution of pH from 4 to 6, showing the greatest Pb sorption capacity at pH values of 4 (83.29 mg g-1) and 6 (103.3 mg g-1). Different indices of filtration and adsorption, including average relative effluent concentration, relative adsorption index, relative transmitted index, and filtration coefficient, were calculated from the break-through curves, indicating that the polyacrylic acid-bentonite nanocomposite was superior in the Pb sorbtion, as compared to bentonite. Also, a higher pH value resulted in the greater Pb removal from the solutions.
E. Javiz, A. Jalalian, M.r. Mosaddeghi, E. Chavoshi, N. Honarjoo,
Volume 26, Issue 4 (Winiter 2023)
Abstract
One of the most significant environmental crises in arid, semi-arid, sub-humid, and even humid regions is the destructive phenomenon of desertification and in the arid and semi-arid regions is wind erosion. These problems exist in large areas of Iran and it is necessary to use an environmentally friendly and economic method to solve this problem. In this study, calcium bentonite clay was used for the first time in Iran and perhaps in the worlds in the critical region of Sajzi, which covers an area of 65 hectares. Experiments were performed on the crusts after one year of mulching with bentonite clay. The results showed that wind erosion has a negative and significant correlation with the mean weight diameter and geometric weight diameter of aggregate, aggregates with diameters greater than 0.25 mm, shear strength, and penetration resistance. On the other hand, the results of the permeability test using double-ring and by three models (Kostiakov, Horton, and Philip) showed that the lowest mean square error (SSE) and the highest coefficient of determination (R2) belonged to the Kostiakov model in the mulch-applied and control samples. This result indicated the superiority of the Kostiakov model compared to Horton and Philip's models. Wind erosion intensity was also measured in situ using a portable wind tunnel at 20 points in the Sajzi region. The findings showed that mulch application has controlled more than 95% of soil erosion.
Sh. Shahmansouri, M.r. Mosaddeghi, H. Shariatmadari,
Volume 27, Issue 1 (Spring 2023)
Abstract
According to the rapid population growth, the challenging issue of production of economic and suitable food sources has led to greater attention to soilless culture greenhouse production systems. Components of growth media in horticulture are usually selected based on physical and chemical properties and their abilities in providing enough water and oxygen for roots. This study was conducted to investigate the feasibility of using some agricultural wastes (i.e., sawdust and wheat straw) and three rockwool types (i.e., raw, ground, ground, and sieved) as substitutes for commercial greenhouse growing media such as cocopeat and perlite. Several hydraulic, aeration, and chemical properties including easily available water (EAW), air after irrigation (AIR), water holding capacity (WHC), water buffering capacity (WBC), saturated water content (θs), bulk density (BD), total porosity (TP), water drop penetration time (WDPT), pH, and electrical conductivity (EC) were measured and scored in the growth media. Raw rockwool had larger particles compared to ground rockwool, which resulted in its faster water release. Processing of the rockwool decreased the saturated water content and saturated hydraulic conductivity due to the decrease in particle size. Four growth media were scored as very good and one was scored as good. The highest and lowest scores belonged to sawdust (34) and ground rockwool (30), respectively. The studied growth media with high TP, EAW, and WHC and low BD, EC, and WDPT can be used individually or combined with other commercial substrates for greenhouse growth media.
F. Gholamzadeh, H. Asgarzadeh, H. Khodaverdiloo, M.r. Mosaddeghi,
Volume 28, Issue 1 (Spring 2024)
Abstract
This study was conducted in the summer of 2021 to evaluate and validate the gravimetric soil water content measurements using a field oven. Ten soil types with a salinity of saturated paste (ECe) less than 4 dS m-1 and three saline soils were studied around Urmia Lake. Plots with dimensions of 1 m × 2 m were prepared for the selected soils to measure gravimetric soil water content and soil physical and chemical properties. The gravimetric water content (θm) values measured using the field oven (i.e., θmFO), were compared with those measured by a standard lab oven (i.e., θmLO). The soil water content values measured in the lab, regarded as a benchmark, were measured at 105 °C for 24 h. Temperatures of 120, 140, and 160 °C with three durations of 10, 15, and 20 min were used to dry the soil samples in the field oven. There was very good compatibility between the values of θmFO and θmLO when the soil samples were dried in the field oven for 15 or 20 min at all three temperatures. Significant linear relations were obtained between the θmFO and θmLO values as the slopes of linear relations were close to 1, the intercepts of relations were negligible and the distributions of measured data around the line 1 to 1 were unbiased. The minimal effects of soil organic matter content, clay content, salinity, and bulk density on water content measurements by the field oven indicate an important advantage of this method. These results confirm the high efficiency of the field oven for fast and reliable measurements of water content in different soils.
