Showing 171 results for Yield
Mohammad Rabiee, Masoud Kavosi, Hassan Shokri Vahed, Pari Tousi Kehal,
Volume 17, Issue 64 (9-2013)
Abstract
In order to evaluate the effect of concentration and time of foliar spraying of nitrogen fertilizer as supplemenfary to soil nutrition on grain yield and some important traits of rapeseed (Hyola401), an experiment was conducted in complete randomized block design with 16 treatments and three replications in in 2008-2009, 2009-2010 growing seasons, and in 2003-2005 growing seasons in paddy fields of Rice Research Institute of Iran (Rasht). In this experiment, nitrogen concentration (from urea source) at two levels (5 and 100.00) and application time at seven levels including 1-seedling stage: 6-8 leaves 2: beginning of stem elongation 3: prior to flowering 4: 6-8 leaves + stem elongation 5: 6-8 leaves + prior to flowering 6: stem elongation+ prior to flowering 7: 6-8 leaves + stem elongation+ prior to flowering with two control treatments including zero nitrogen fertilizer and basal fertilization as 1/3 at seed sowing, 1/3 at stem elongation and 1/3 prior to flowering stages of 180 kg pure N ha were considered. Results of combined analysis showed significant differences between the experimental treatments in most traits. Spray application of nitrogen (100.00) in stem elongation+prior to flowering stage produced maximum silique length (6.8 cm), number of secondary branch (7.1) and plant height (141.1 cm). Also, the spray application (100.00) in 6-8 leaves+stem elongation+ prior to flowering stage had maximum biological yield (10684.6 kg.ha-1), grain and oil yields (3686.2 and 1489.3 kg.ha-1, respectively) and the maturity period (202 days). Spray application (100.00) in stem elongation+ prior to flowering stage did not induce significant difference with spray application (100.00) in the three stages. Maximum oil content was observed in control treatment (zero nitrogen fertilizer) with an average of (44 %). According to the results of the present experiment, it seems that spray application of nitrogen (100.00) at final growth stage of rapeseed (stem elongation+ prior to flowering stage) increases grain and oil yields.
A. Mohammadkhani, M.r. Nouri Emamzadeh, A. Mirjalili,
Volume 17, Issue 66 (2-2014)
Abstract
Four partial root zone drying (FULL, 1PRD50, 2PRD50, 3PRD50) treatments were investigated on tomato characteristics and water use efficiency using completely randomized design with five replications. In the control treatment (Full irrigation), all water requirement of plant was met in the root area equally during the growing season. Roots in 1PRD50, 2PRD50 and 3PRD50 treatments were divided into two equal parts and each side of root was irrigated one, two and three times, respectively. Results showed that the highest (44.43 g) and lowest (24.57g) tomato mean weights were obtained at full irrigation and 3PRD50, respectively. Maximum of diameter (43.1 ml) and fruit number (46 No) was observed in the control and minimum of these traits (15.6 ml and 20 No, respectively) was observed in 3PRD50 treatment. There was a highly significant difference between fruit number in all treatments. Highest yield and marketable yield was obtained in the control and 1PRD50 treatment, respectively. The highest irrigation water use efficiency was obtained in 1PRD50 (48 percent more than the control) and the lowest value was in 3PRD50 (27 percent lower than the control). Based on results of this study, partial intermittent irrigation (1PRD50) is recommendable for tomato production.
M. Hosseini, S. A. Movahedi-Neeni, M. Zeraat Pishe,
Volume 18, Issue 68 (9-2014)
Abstract
Effects of five various tillage systems on soil porosity, volumetric water content, diurnal and nocturnal soil temperatures, plant water uptake and dry matter yield was investigated using a completely randomized design with five treatments and four replications in Gorgan University of Agricultural Sciences and Natural Resources research farm located in Seyed-Miran during 2009-2010 growing season. Tillage systems were: moldboard plough followed by one discing (20-25 cm) rototiller (12-17 cm) double disc (8-10 cm) Chisel plow (25-30 cm) No-tillage. Results show that during all stages of wheat growth, the highest and the lowest soil porosities at 0-8 cm depth were obtained by moldboard plough and No-tillage treatments respectively. For all stages except before tillering and harvest, the highest soil porosity obtained by moldboard treatment at 8-16 cm depth. Increasing tillage intensity increased those porosity that keep water in potentials greater than -5 and those in potentials less than -15 bar. No-tillage and moldboard induced the highest and the lowest soil temperatures respectively before earring stage. Tillage intensification, increased soil porosity and root density. More roots reduced soil water content in response to increased water uptake by wheat, resulting greater dry matter accumulation.
S. Samadvand, M. Tajbakhsh, K. Anvari, J. Ahmadaali,
Volume 18, Issue 70 (3-2015)
Abstract
An experiment was performed at the Miyandoab Agricultural Research Station to study yield and water use efficiency of furrow and tape irrigation systems in one-row and two-row planting patterns, and to investigate density of grain corn SC704. The experimental design was a completely randomized block arranged in Strip Split Plots with three replications in 2010. Irrigation treatments were applied in vertical plots, and planting arrays of different densities were applied in horizontal plots in the form of split plots. The vertical plots were comprised of four irrigation treatments, including three levels (80%, 100% and 120%) of water requirement by use of drip tape irrigation and 100% of water requirement in furrow irrigation, and the horizontal factor was a planting array in the form of single-row and two-row planting patterns and the sub factor was comprised of three levels: 75, 90 and 105 thousand plants per hectare. The results showed that furrow irrigation had the highest rate of grain yield, about 18.6 ton per hectare, and the treatments of tape irrigation of 120%, 100% and 80% had 18.4, 18.2 and 14.9 tons per hectare, respectively. Although the furrow irrigation treatment had higher yield than the rest, there was no significant difference between treatments except for the 80% of tape irrigation. Thus, by utilizing tape irrigation without a great decrease in the yield, water use efficiency improved. The comparison between treatments of tape irrigation of 80%, 100%, 120% and furrow irrigation led to grain yields of 2.3, 2.2, 1.9 and 1.4 kg/m3, respectively. Also, the highest water use efficiency and maximum yield were obtained from 90000 plants per hectare.
J. Hamzei, M. Seyedi,
Volume 18, Issue 70 (3-2015)
Abstract
This experiment was carried out at the Agricultural Research Station of Bu-Ali Sina University to study the effect of different tillage methods on bulk density, yield, and yield components of barley (Hordeum vulgare) cultivars under rainfed conditions. Three levels of tillage (CT: conventional tillage, MT: minimum tillage and NT: no tillage) and five barely cultivars (V1: Local V2: AbidarV3: Valfagr V4: Bahman and V5: Makouei) were evaluated in a factorial arrangement in a completely randomized block design with three replications in the growing season of 2010-11. Traits of bulk density plant height, grain yield, yield components, biological yield, and harvest index (HI) were evaluated. The results showed that maximum value of bulk density (1.09, 1.26 and 1.29 g cm-3 for 0-10, 10-20 and 20-30 cm of sampling depth, respectively) was observed at MT treatment. But, there was no significant difference between MT and NT treatments for this trait. In comparison of cultivars, maximum bulk density was achieved with Valfagr cultivar. Using chisel plow (MT treatment) produced maximum plant height (70 cm) and yield components (513 numbers of spike m-2 and 19.2 grain spik-1). Also, among cultivars maximum plant height (72.7 cm) and grain number spike-1 (23.2 grain spike-1) belonged to Valfagr cultivar. Also, results showed that V3×MT treatment had the highest grain yield (3100 kg ha-1). Therefore, the findings of the study recommend using chisel plow (MT treatment) and Valfagr cultivar.
Kh. Hosseini, M. Kheirkhahn,
Volume 18, Issue 70 (3-2015)
Abstract
Cohesive sediments have large specific surfaces which enable them to absorb other cohesive sediments and polar particles such as mud and sodium. Floccules form by joining these particles. The behavior of cohesive sediments in aquatic environments is completely different from that of granular sediments. Under certain value of shear stress, the structure formed from cohesive sediments is divided into smaller particles, which can be eroded easily. Up to now, researchers have proposed empirical formulas which correlate the rate of erosion to the bed shear stress and the rheological characteristics of cohesive sediments. In this study, the calibration and verification tests are performed on Mike21 software to attain the results more adjusted with the experimental data. Afterwards, the data are developed by the model and converted to the dimensionless form. Finally, an exponential function is proposed for the erosion rate in cohesive sediments. It is found that the coefficient of determination is 0.99
S. M. Mousavi, S. M. Mirlatifi, S. H. Tabatabaei,
Volume 19, Issue 71 (6-2015)
Abstract
The effects of water quality, installation depth and space of subsurface drip irrigation (SDI) laterals on yield and visual quality of turfgrass were investigated. A field experiment was conducted at the experimental farm of Shahrekord University. The experimental design was a Split-Split Plot with experimental arrangement of completely randomized block design with 16 treatments and three replications. Treatments included two types of water quality: well water (W) and treated wastewater (WW), two installation spaces of SDI laterals (45 and 60 cm) and four depths of placement of SDI laterals (15, 20, 25 and 30 cm). Turfgrass indices recorded during the experiment included height, dry mass, color, visual density and growth uniformity. The ANOVA results showed that interaction of irrigation water quality × lateral spacing × installation depth of SDI laterals is significant on the height, dry mass and growth uniformity of turfgrass. Irrigation with wastewater as compared to well water produced grass with significantly higher height and more dry weight. Treatments irrigated with well water had a better growth uniformity than those treatments irrigated with wastewater. Results indicated that there was no significant effect of experimental factors on turfgrass color. The interactional effect of lateral spacing and installation depth on the turfgrass density was significant. Increasing installation depth and laterals spacing caused a decrease in turf’s yield and visual quality.
M. Rezvani, M. Shafiezadeh,
Volume 19, Issue 71 (6-2015)
Abstract
Nowadays, due to the effective role of nitrogen fertilizer in growth, yield and crop quality, farmers apply large amount of chemical fertilizers. High application of nitrogen fertilizers has caused soil and water pollution and environmental dangers, higher nitrate accumulation in plant, and different disease risks in human and livestock. In order to investigate the effects of nitrogen and cycocel application effects on soil nitrate pollution and agronomic traits of rice, an experiment was arranged in split plot based on a completely randomized block design with three replicates at Sari region (north of Iran) in 2010. The main factor was nitrogen in four levels and cycocel was considered as a sub factor in three levels. Results showed that maximum and minimum plant height and fourth internodes bending moment were obtained in 0 and 150 kg N ha-1, respectively. Higher filled spikelet percentage per panicle, grain yield and harvest index were obtained in 100 kg N ha-1 application. Application of N up to 150 kg N ha-1 increased soil nitrate by 44.7 percent. As cycocel application decreased, the plant height and panicle length were reduced, but tiller number per plant, filled spikelet percentage per panicle, and grain yield were increased.
N. Basirani, H. Karimi, A. Moghadamnia, H. Ebrahimi,
Volume 19, Issue 72 (8-2015)
Abstract
Erosion and sedimentation as a river natural behavior lead to the loss of soil and cause irreparable damages to water development projects. Since the phenomenon of erosion and deposition is one of the most complex natural processes, the complete understanding of the effective factors involved in this phenomenon is really a big problem. This study was done to optimize the parameters affecting sediment yield and determine their sensitivity in the Doiraj river basin in the West of Iran, using SWAT, a semi-distributed model, and SUFI2 algorithm, and the monthly sediment yield from 1994 to 2004. In the first run of the model, coefficients R2, NS, and Br2 were respectively obtained as 0.43, 0.39 and 0.28. The results showed that performance of the model with the default data was not satisfactory and we needed to determine the used optimal values. Then, the optimal values of parameters were determined using SUFI2 algorithm and reverse modeling and the model was run with the new values. Based on the new results, coefficients R2, NS, and Br2 were respectively obtained as 0.75, 0.73 and 0.65 and performance of the model improved and its accuracy increased acceptably. In the next step, from among the studied 30 parameters, (CH_N2), (USLE_K), (USLE_P) and (OV_N) were identified as the important parameters effective in the output of the sediment yield from basin. Also, USLE_K as was diagnosed as the most sensitive parameter. Results of this survey can be used in the management of the effective parameters in sediment load. Determining exact values of the effective parameters in other studies can be helpful to improve the simulation results in similar basins, too.
J. Abedi Koupai, M. Golabchian,
Volume 19, Issue 72 (8-2015)
Abstract
Nowadays, due to the high potential of advanced simulation models for groundwater, these models are comprehensively applied in the management and exploitation of groundwater resources. The aim of this study was to investigate and simulate the groundwater resources in Kouhpayeh-Segzi watershed and in particular estimate the hydrodynamic coefficients of unconfined aquifer. After preparation of input layers, efficient parameters in modeling, boundary conditions and aquifer gridding were determined. Then, based on the available data, the model was run and calibrated in a steady state for the water year 2002 and in a transient state for water years between 2002 and 2004. The simulation outputs were confidently verified for the water year 2005. The results indicated that the hydraulic conductivities and storage coefficients were ranged on sub-basin from 15.26 to 19.87 m/day and 0.0107 to 0.0186, respectively. From aquifer's hydrograph for a period from 1995 to 2012, water level dropped about 25 cm. This may be due to two irrigation networks (green area). This leads to rising water level. By ignoring these recharge areas, water level declined up to 80 cm per year. With sensitivity analysis in transient state to evaluate the efficacy of each parameter, the accuracy of the results of calibration model was confirmed. In addition, the hydraulic head values computed by MODFLOW were in good agreement with those that were collected from all piezometers.
Engineer H. Talebikhiavi, Engineer M. Zabihi, Dr. R. Mostafazadeh,
Volume 21, Issue 2 (8-2017)
Abstract
Effective soil conservation requires a framework modelling that can evaluate erosion for different land-use scenarios. The USLE model was used to predict the reaction of appropriate land-cover/land-use scenarios in reducing sediment yield at the upland watershed of Yamchi Dam (474 km2), West Ardabil Province, Iran. Beside existing scenario, seven other land-use management scenarios were determined considering pattern of land-use through study area within a GIS-framework. Then, data inputs were prepared using terrain data, land-use map and direct observations. According to the model results, the generated erosion amount was 3.92 t/ha/yr for the current land-use (baseline scenario). For this purpose, conservation practices in dry farming slopes and implementing the scenario 5 (contour farming and remaining crop residuals) can reduce the sediment to 2.02 t/ha/yr. The lowest and highest decreases in sediment yield are projected to be through implementation of scenario 6 (irrigated farming protection with plant residuals) and 7 (biological soil conservation in dry and irrigated farming). The results indicated that, implementing scenario frameworks and evaluating appropriate land-use management scenarios can lead to the reduction of sediment entering the reservoir, and prioritizing soil conservations in the studied area.
M. Shahsavari Gugharغ, A. Rezaei Estakhroieh, M. Irandost, A. Neshat,
Volume 22, Issue 1 (6-2018)
Abstract
With the increase of population, the optimal use of water resources is necessary. This study was carried out to evaluate the impact of different levels of irrigation on the yield, yield components and water productivity of corn using single and double row drip irrigation systems (Tubes type). . The experiment was conducted in a split plot design based on the randomized complete block design (RCBD) with three replications in 2012 in Hajiabad, Hormozgan Province. The treatments were comprised of three levels of irrigation as the main plot (100, 80 and 60% water requirement) and two patterns of irrigating water pipe installation (normal and every other row) as a sub-plot of the design. The results showed that irrigating with the 80 percent water requirement, in comparison with full irrigation, increased the total yield by 1.4%, the seed weight by 1.8%, the number of seeds per row by 8.7%, and the number of seed row per maize by 13%. In spite of yield superiority in the pattern of normally irrigating water pipe installation (10055.56 kg ha-1), against every other row installation (9366.67 kg ha-1), water productivity was more in every other row installation (1.089 kg m-3). Therefore, partial root-zone drying was recommended by the irrigation of the 80% plant water requirement for the maize in the region.
N. Nourmahnad,
Volume 22, Issue 2 (9-2018)
Abstract
Due to the water scarcity in Iran, it is important to provide strategies to reduce water consumption in the agriculture sector. Zycosil is a nanotechnology material that makes a great hydrophobe in the soil. This study was conducted based on completely randomized block design within microlysimeter with the height of 15 cm and the diameter of 8 cm to investigate the hydrophobic effect on the amount of consumed water in pepper. Sweet pepper seedlings were planted in them; then the treatments were applied. The Z25, Z50 and Z75 treatments consisted of covering 25, 50 and 75 % of the soil surface by Zycosil; these were compared with the control (Ctrl- no Zycosil application) in three replications. The results showed that Z75 treatment reduced 27% water consumption and increased the fresh yield by approximately 62 %. The increased yield of Z25 and Z50 was 5 and 26 %, respectively. Dry pepper yield was increased in Z25, Z50 and Z75 treatments by 22, 19 and 80%, respectively, as compared to Ctrl treatment. The amount of water consumed was decreased by 10 % per 25% coverage level. The least amount of water use efficiency was observed in the control treatment (1.28 gr/cm3). The Z75 had the highest water use efficiency (2.96 gr/cm3). Hence, the application of hydrophobic material such as Zycosil in the soil surface reduced water evaporation and increased water retention. This increased the yield and water use efficiency.
M. Yazdekhasti, M. Shayannejad, H. Eshghizadeh, M. Feizi,
Volume 22, Issue 3 (11-2018)
Abstract
Due to the dry climate and limitation of fresh water resources, using fresh and salt water is a solution for crop production under salinity conditions. This study was conducted at Isfahan University of Technology as a randomized complete block design with three replications and five irrigation management treatments in 2014. The treatments included irrigation with saline water (with the salinity of 5 dS/m, based on the relative yield of 75%), irrigation with fresh water (municipal water), alternate irrigation (irrigation with saline water and the next irrigation with fresh water), conjunctive irrigation (half of irrigation with saline water and the other one with fresh water) and irrigation with fresh water to reach the raceme stage, and irrigation with saline water. The maximum wet yield, dry yield and grain yield were related to the fresh water treatment with 4.14, 2.45 and 0.588 kg/m2 and the minimum values were obtained for water their water treated with 1.34, 0.765 and 0.0957 kg/m2 respectively. The conjunctive treatment had the highest yield after fresh water treatment. The various statistical indices showed that this model could be used for sorghum in Isfahan. The determination coefficient for yield was 0.65.The priority of model for yield simulation was salt water at the last stage, alternate irrigation, saline water, conjunctive irrigation and fresh water treatments, respectively.
B. Rezaeiniko, N. Enayatizamir, M. Norouzi Masir,
Volume 22, Issue 4 (3-2019)
Abstract
Zinc is essential micronutrients for plants. This element improves plant growth and yield and plays a role in the metabolism of carbohydrates. Zinc deficiency in soils and Iranian crops is possible due to numerous reasons such as calcareous soils, excessive use of phosphorus fertilizers and unbalanced fertilizer use. The effect of zinc solubilizing bacteria on some wheat properties was considered as a factorial experiment in greenhouse conditions based on a completely randomized design. Treatments consisted of four levels of bacteria comprising B1 (control), B2 (Bacillus megaterium), B3 (Enterobacter cloacae) and B4 (consortium of both bacterium), and ZnSO4 fertilizer at three levels including Zn0 (control), Zn20 (20 Kg/ha) and Zn40 (40 kg/ha). During the experiment, some parameters such as plant height and chlorophyll index were measured. At the end of the cultivation period, soil available zinc, dry weight of root and aerial part, and the zinc concentration of the root, shoot and grain were determined. Grain yield and zinc uptake in the grain were also calculated. The results indicated soil exchangeable zinc content was increased significantly (P<0.05) in all bacterial treatments, as compared to the control treatment. The maximum amount of soil exchangeable zinc, grain yield, zinc concentration and uptake in grain were observed in the treatment containing bacteria consortium with the application of 40 kg/ha of zinc sulfate fertilizer, which was followed by the treatment containing Enterobacter cloacae with the application of 40 kg/ha of the zinc sulfate fertilizer. The maximum amount of all measured properties in the treatment containing Enterobacter cloacae and Bacillus megaterium indicated the possibility of applying those bacteria for zinc enrichment in wheat, crop optimal production, and the sustainable agriculture.
N. Salamati, H. Dehghanisanij, L. Behbahani,
Volume 23, Issue 1 (6-2019)
Abstract
In order to investigate the effect of water quantity in subsurface drip irrigation on water use efficiency of palm yield and yield components, and determining suitable irrigation treatments for three different date cultivars, a split plot experiment design in a randomized complete block design with three replications were applied for three cropping years (2013-2016), at Behbahan Agricultural Research Station. The applied irrigation water in three levels based on 75, 100 and 125 percent of water requirement in the main plots and three cultivars of Kabkab, Khasi and Zahidi dates were compared in sub plots. The irrigation level of 75% with 0.646 kg of dates per 1 cubic meter of water in terms of water use efficiency as compared to the other two levels of irrigation showed a significant superiority. The Khasi cultivar with 83.9 pips and 29.2929 fruits in the cluster ranked first. The irrigation level of 125% with 11.1% were higher in fruit moisture, and 100% and 75% irrigation levels with 9.6% and 7.8% moisture content were the next. The irrigation level of 125% for Kabkab cultivar with a volume of 11.1 cubic centimeters were ranked first. Optimizing water use and reducing it to 10606 cubic meters per hectare in irrigation level of 75% water treatment will save water consumption. If the basis for comparing the amount of water used in 100% water treatment is considered, then the use of subtropical drip irrigation reduces water consumption by 2509.6 and 5019.2 cubic meters per hectare, respectively, compared to 100 and 125% water requirements.
N. Ganji Khorramdel, M. Abdoos, S. M. Hoseini Mooghaari,
Volume 23, Issue 3 (12-2019)
Abstract
Due to water use increasing, attention to optimal water resources allocation is needed. In recent decades, the use of intelligent evolutionary methods for optimization of water allocation was focused more by researchers. The aim of this study is to development on water resources planning model that determined the proper cultivation, optimal exploitation of groundwater and surface water resources although water allocation among crops is a way to minimize the adverse effects of dehydration and increase its revenue. In this study, for maximizing profits, estimating crop water requirements at different periods to optimize the management of cropping patterns and irrigation management in cultivation in Varamin irrigation network using a new evolutionary algorithm was called the water cycle. Then for validation of this method is that a new approach and ensure the integrity of its performance Its results are compared with a genetic algorithm model and linear programming as our base (R2=0.9963). The results showed that the area cropping pattern was not optimal and the area under cultivation of crops such as wheat, barley, tomatoes, Bamjan, melon, alfalfa reaches zero and the new paradigm of the largest area under cultivation to industrial goods and then was assigned cucumbers. While our revenues have increased about 11 percent. In addition to amount of water in different months remain in the network that can be used for many that such as injection into underground aquifers or other crops based on the amount of water available.
N. Enayatizamir, M. Noruzi Masir, A. Ghadamkhanii,
Volume 23, Issue 4 (2-2020)
Abstract
The soil organic matter plays an important role in increasing agricultural products and various nutrient cycle in the soil due to its effect on the physical, chemical and biological properties of soil. There is, however, little information regarding the effect of growth promoting bacteria on biological indices and different forms of carbon in agricultural soils of the country. Therefore, this study was aimed to investigate the effect of plant growth promoting bacteria on soil respiration, microbial quotient, organic carbon, microbial carbon biomass, permanganate oxidizable carbon, cold water extractable organic C, and hot water extractable organic C under the cultivation of wheat, Chamran cultivar. The experiment was conducted in greenhouse condition as a randomized complete design with 9 replications. Treatments consisted of bacterium inoculation (without inoculation, Enterobacter cloacae Rhizo_33, Enterobacter cloacae Rhizo_R1
and mixof both bacteria). During the experiment, some characteristics such as plant height and chlorophyll index were measured. At the end of the cultivation period, root and aerial part dry weight and grain yield were determined. Biological properties and different forms of carbon in the soil were measured after cultivation. The results indicated the applied plant growth promoting bacteria increased chlorophyll index, height, root and shoot dry weight and grain yield, as compared to the control. The minimum value of pH and the highest amount of each carbon forms were obtained by soil inoculation with different strains of bacteria, as compared to the control. The highest value of organic carbon was observed in the presence of the consortium of both bacteria with 22.7% increase, as compared to the control. The highest amount of microbial carbon biomass was, respectively, measured in the treatments containing consortium of bacteria, Enterobacter cloacae Rhizo_R1, Enterobacter cloacae Rhizo_33 with 87.67, 42 and 26.5% increment, as compared to the control. A positive and significant correlation was observed between cold and hot water extractable organic carbon, dissolved organic carbon and permanganate oxidizable carbon with soil respiration and there was a negative correlation between mentioned properties and the soil pH. The use of microbial inoculants increased the carbon content of the soil, which can play a positive role for improvement of physical and chemical properties of the soil and plant yield.
M. A. Ansari, A. Egdernezhad, N. A. Ebrahimipak,
Volume 23, Issue 4 (2-2020)
Abstract
This study was conducted to evaluate AquaCrop for the simulation of potato yield and water use efficiency (WUE) under different water stress values at five levels (E0, E1, E2, E3 and E4, indicating 100, 85, 70, 50 and 30 percent of crop water needed, respectively) in three times during growth cycles (T1, T2, and T3, indicating 50, 100, and 150 days after sowing, respectively). The results showed that AquaCrop had overestimated and underestimated error for the simulation of yield and WUE, respectively. Based on RMSE and NRMSE values, the errors for yield and WUE were acceptable. The maximum and minimum error were also 0.3 (E1T3) and 3.15 (E1T2), respectively. The results obtained for WUE showed that the maximum and minimum were 0.53 (E3T2) and 0.03 (E4T2), respectively. The average differences between simulated and observed results (ADSO) of WUE for E1, E2, E3 and E4 were 0.24, 0.25, 0.19, and 0.44 ton.ha-1, respectively; the ADSO of yield for T1, T2, and T3 was 0.19, 0.36, and 0.22 ton.ha-1, respectively. Therefore, AquaCrop showed a high error for WUE when water stress was increased and crop was in its initial crop growth.
M. Tavangar, H. R. Eshghizadeh, M. Gheysari,
Volume 24, Issue 2 (7-2020)
Abstract
The present study aimed to evaluate the growth and water use efficiencies of eight late-maturing corn hybrids in comparison to the common use of KSC704 and Maxima-FAO530 under different water-nitrogen management systems. Two irrigation regimes (based on 50% soil-water depletion as the normal irrigation and, on average. 16% less than normal as the deficit irrigation) and two nitrogen (N) application managements (3 and 16 split-application of 150 kg N from Urea, 45% N) were induced using the split-split plot experiment based on a completely randomized block design with four replications at Research Field of Isfahan University of Technology on 2017. The results showed that yield, forage and leaf area index were significantly (P<0.01) affected by the interaction of three studied factors (Irrigation × Nitrogen × Corn hybrid). For different corn hybrids, more water use efficiencies were achieved by deficit-irrigation regime and 16- split-applyication of N; in this regard, the SC719 hybrid had the highest value of 3.45 kg m-3. Generally, the performances of the studied late maturing corn hybrids were higher than those of the control hybrids of SC704 and SC530 at this planting date, which could be improved by using the deficit-irrigation regime and more split-application of the N fertilizer.
