Showing 47 results for کرمی
L. Khodakarami, A. Soffianian, N. Mirghafari, M. Afyuni, A. Golshahi,
Volume 15, Issue 58 (winter 2012)
Abstract
Among the environmental pollutants, heavy metals according to their irresolvable and physiological effects on living organisms at low concentrations, are of special importance These elements due to low mobility are gradually accumulated in soil Being accumulated in soil, they eventually enter the food chains and threaten human health and other creatures Therefore, studying concentration distribution of heavy metals for soil pollution monitoring and maintaining environmental quality is essential In this study we investigated the effect of agricultural land use and geology on the concentration of heavy metals contamination of soil and spatial distribution map, using collected data, GIS and GeostatisticsUsing systematic stratified random sampling, 135 surface soil samples( 0-20 cm) from an area of 7262 sq km area and we measured total concentration of elements Nickel, Chromium and Cobalt and soil characteristics including pH, organic matter and texture. The mean value of elements concentrations turned out to be Cr: 88.9+22.7 Co: 17.6+3.5 Ni 63.1+17.7 mg per kg and the mean acidity is 7.8 which in the area is an indication …… property. Formetal concentrations interpolation procedures, Geostatistics was used. By the aid of spatial correlation analysis, appropriate interpolation method using functions mean absolute error and bias average error were selected. Interpolation map concentrations of heavy metals Chromium, Cobalt and Nickel with ordinary kriging method and the exponential model were developed Interpolation map analysis of heavy metals by the aid of geological and land use maps show that the distribution of the elements Chromium, Cobalt and Nickel are consistent with the geology classes However, they did not match the agriculture pattern Findings of this study in the area give us appropriate information about the concentration distribution of heavy metals Chromium, Cobalt and Nickel which can be used in monitoring and evaluation processes of heavy metals pollution in agricultural lands area. But on the other hand sampling in the areas far away from human effects, showed that the heavy metals concentration is naturally high.
L. Khodakarami , A. Soffianian,
Volume 16, Issue 59 (spring 2012)
Abstract
Precision farming aims to optimize field-level management by providing information on production rate, crop needs, nutrients, pest/disease control, environmental contamination, timing of field practices, soil organic matter and irrigation. Remote sensing and GIS have made huge impacts on agricultural industry by monitoring and managing agricultural lands. Using vegetation indices have been widely used for quantifying net annual production on different scales. The aim of this study was to find a rapid method with acceptable precision for the identification and classification of agricultural lands under cultivation (wheat and barley, alfalfa and potatoes). We used multi-temporal AWiFS data and applied Boolean logic and unsupervised classification.
Results indicated that Boolean logic approach had a higher accuracy and precision in comparison to unsupervised classification, although it is more complicated and time consuming.
M. Karam, M. Afyuni, A. H. Khoshgoftarmanesh, M. A. Hajabbasi, H. Khademi, A. Abdi,
Volume 16, Issue 61 (fall 2012)
Abstract
The task of modern agriculture is to safeguard the production of high quality food, in a sustainable natural environment under the precondition of pollution not exceeding accepted norms. The sustainability of current land use in agro-ecosystems can be assessed with respect to heavy metal accumulation in soils by balancing the input/ output fluxes. The objectives of this study were to model accumulation rate and the associated uncertainty of Zn in the agro-ecosystems of 3 arid and semi-arid provinces (Fars, Isfahan and Qom). Zinc accumulation rates in the agro-ecosystems were computed using a stochastic mass flux assessment (MFA) model with using Latin Hypercube sampling in combination with Monte-Carlo simulation procedures. Agricultural information including crop types, crop area and yield, kind and number of livestock, application rates of mineral fertilizers, compost and sewage sludge and also metal concentration in plants and soil amendments were used to quantify Zn fluxes and Zn accumulation rates. The results indicated that Zn accumulates considerably in agricultural lands of the studied townships especially in Najafabad (3009 g ha-1yr-1). The major Zn input routes to the agricultural soils (and due to agricultural activities) were manure and mineral fertilizers and the major part of the uncertainty in the Zn accumulation rate resulted from manure source.
Mahin Karami, Majid Afyuni, Amir Hossein Khoshgoftarmanesh, Mohammad Ali Hajabbasi, Hossien Khademi, Ali Abdi,
Volume 17, Issue 64 (summer 2013)
Abstract
Zinc (Zn) is an essential trace element for plants as well as for animals and humans. There is a significant relationship between soils, plants and humans Zn status in a certain agro-ecosystem. The objectives of this study were to assess Zn status of soils in 3 arid and semiarid provinces of Iran and to model the relationship between wheat grain Zn and agro-ecosystem parameters. About 137 soil and wheat samples were collected randomly from the agricultural soils of Fars, Isfahan and Qom and were analysed in laboratory. Modeling the relationship between wheat grain Zn and agro-ecosystem parameters was done using least square based and robust methods. The results indicated that total Zn concentration of soils (range, 21-149 mg kg-1 mean, 75.2 mg kg-1) was in normal ranges. The DTPA-extractable Zn concentrations were below the critical level (0.8 mg kg-1) in 16% of the surveyed fields. The Zn concentration in 80% of wheat grains was sufficient (more than 24 mg kg-1) with respect to plant nutrition (range, 11.7-64 mg kg-1 mean, 31.6 mg kg-1). However, Zn bioavailability for consumers was generally low in more than 75% of the samples. This is because of high phytic acid to Zn molar ratio (more than 15). Soil DTPA-extractable Zn and available P were entered in to most of regression models significantly. Regression analysis showed that most of models fitted to wheat grain Zn concentration and soil Zn and influenced by agro-ecosystem parameters had a weak prediction power, despite their high determination coefficient. This means that factors other than those considered here have a strong influence on the uptake of Zn by wheat in these soils.
I. Vayskarami, K. Payamani, A. Shahkarami, A. Sepahvand,
Volume 17, Issue 65 (fall 2013)
Abstract
The main aim of flood water spreading in Iran is to recharge groundwater. Understanding the effect and efficiency of such projects is one of the most important activities in managing and implementing water spreading. The purpose of this study was to investigate the effects of water spreading on groundwater resources in Kohdasht plain. Data and information required including precipitation rate, groundwater level and groundwater exploitation were collected and analyzed for a ten year period. First of all, in order to assess the three variables test of normality was performed and then all the data was normalized. The results showed that before implementing the water spreading project, fluctuations of groundwater were proportional to utilization of groundwater resources, showing a declining rate. After implementing the project, a turning point on groundwater level was observed. Also, another turning point was recognizable in hydrological year 1377-1378. In addition to overexploitation, drought affected the aquifer so dramatically that standard index in hydrological year 1371-1372 decreased from 0.3 to -1.5 in hydrological year 1377-1378.
M. Karamian, V. Hosseini,
Volume 19, Issue 71 (spring 2015)
Abstract
Soil is one of the most important components in forests and distinguishing soil types and soil capability are first steps in forest management. The main aim of this study was to determine relationship between slope aspect and position, and chemical properties of the soil. Soil sampling was done in Tang-e-Dalab in Ilam province which is a part of southern Zagros. Samples were collected in both northern and southern slopes of oak stand (Quercus brantii). In each slope, three transects 50m apart were sampled. Overall number of samples was 60. After data normalization, the means were compared by Duncan test. Slope aspects influenced organic carbon and total nitrogen of soil. These parameters were higher in northern slope than southern one. Slope position showed a significant effect on C, N and P. Also, concentration of C, N and P were increased by moving down the position. Most amounts of C, N and P were 5.84%, 0.58% and 108.19 mg/kg in bottom, middle and bottom of northern aspect, respectively. The least amounts of C, N and P were 3.31%, 0.24% and 37.83 mg/kg in bottom, middle of southern aspect and top of northern aspect, respectively. The results of this study confirmed that nutrient concentration in northern slope was more than southern slope and nutrient concentration in soil was increased by moving downward.
H. R. Eshghizadeh, M. Kafi, A. Nezami, A. H. Khoshgoftarmanesh, M. Karami,
Volume 19, Issue 73 (fall 2015)
Abstract
This study was conducted to determine some mineral content concentrations in soils and plants of three elevation classes (1500, 2200 and 3000m) and two phenological stages of flowering and seedling in north facing slopes of Sabalan rangelands. Soil samples from the depth of 20cm and plant samples using 1×1m plots with 10 replications were collected. After sample preparation, the concentrations of minerals such as calcium, phosphorous, sodium, potassium, ion, copper, zinc and magnesium were determined using spectrophotometer and flame photometer. Data was analyzed by SAS9.1 software using a Completely Randomized Design with a Generalized Linear Model procedure. Results showed that elevation had a significant effect on Ca, Fe, Cu, Zn and Mn of soil and P, Na, K, Mg and Mn of plants in the study areas (P&le0.05). Growing stages had a significant effect on all elements of plants except Ca (P&le0.05). Moreover, results showed that in three elevation classes the high demand minerals' concentrations were higher at the starting seedling stage in comparison with the flowering stage. In contrast, the low demand minerals' concentrations in three elevation sites were higher in the flowering stage in comparison with seedling stage. Interaction effect of elevation and growing stage was also significant in relation to all elements except Ca (P&le0.05).
D. Rajabi, H. Karami, Kh. Hosseini, S. F. Mousavi , S. A. Hashemi,
Volume 19, Issue 73 (fall 2015)
Abstract
Non-linear Muskingum model is an efficient method for flood routing. However, the efficiency of this method is influenced by three applied parameters. Therefore, efficiency assessment of Imperialist Competition Algorithm (ICA) to evaluate optimum parameters of non-linear Muskingum model was addressed in this study. In addition to ICA, Genetic Algorithm (GA) and Particle Swarm Optimization (PSO) were also used to find an available criterion to verify ICA. In this regard, ICA was applied for Wilson flood routing then, routing of two flood events of DoAab Samsami River was investigated. In case of Wilson flood, the target function was considered as the sum of squared deviation (SSQ) of observed and calculated dischargem. Routing two other floods, in addition to SSQ, another target function was also considered as the sum of absolute deviations of observed and calculated discharge. For the first floodwater based on SSQ, GA indicated the best performance however, ICA was in the first place, based on SAD. For the second floodwater, based on both target functions, ICA indicated a better operation. According to the obtained results, it can be said that ICA could be recommended as an appropriate method to evaluate the parameters of Muskingum non-linear model.
Sh. Ahmadi Doabi, M. Afyuni, H. Khademi, M. Karami,
Volume 20, Issue 76 (Summer 2016)
Abstract
Heavy metals in dust can directly enter to the human body through ingestion and inhalation. They can pollute the water and soil resources via atmospheric precipitation and accumulate in the plant tissues and then enter human body through water and food. This research aimed to study the heavy metals concentration in dust in Kermanshah province and to identify their sources. 49 samples of dust were collected in the cities of Kermanshah, Songhor, Gilangharb, Ghasre-Shirin, Sahneh, Sarpolzahab, Kangavar, Paveh and Javanrood during the spring 2013. The concentration of Zn, Cu, Ni, Cr, Mn and Fe were determined using an atomic absorption spectrometer following the sample extraction with a mixture of HCL and HNO3 (3:1 ratio). The average concentrations of Zn, Cu, Ni, Cr, Mn and Fe were 182.3, 48.6, 115.3, 73.9, 428.1 and 23161 mg kg-1, respectively. Correlation, cluster and principal component analyses were used to identify probable natural and anthropogenic sources of contaminants, and the enrichment factor was used to identify probable effects of human activity on the concentration of heavy metals. The results indicated that metal concentrations, except for Fe and Mn, were higher in comparison with the world soils. Zn, Cu, Ni and Cr are mainly of anthropogenic origin, while Fe and Mn are mainly of natural origin. Zn and Cu are mainly of traffic sources and partly of industrial sources, and Ni and Cr are mainly derived from industrial sources, combustion processes, combined with traffic sources. The analysis of EF revealed moderate enrichment for Mn and Cr, and significant enrichment for Zn, Cu and Ni. Based on the results of this study, more attention should be paid to identifying and controlling the sources of contaminants such as heavy metals in dust in order to prevent their associated pollution.
S. M. Seyedian, M. Karami Moghadam, Y. Ramezani,
Volume 21, Issue 4 (Winter 2018)
Abstract
The study of flow patterns in front of intake has been attracted the attention of researchers during the past decades to explore the mechanism of flow and sediment entry to the intake. In this study, the separation and stream tube dimensions were investigated in water intakes installed to rectangular and trapezoidal main channel. These researches were carried out with experimental and fluent models. The results of experimental and fluent models have a good conformity. It was found that, in trapezoidal main channel, the stream tube width decreases near the bed and increases near the surface and separation dimensions reduced and led to reduction of sediment entry and increase of efficiency
M. Sadeghian, H. Karami, S. F. Mousavi,
Volume 21, Issue 4 (Winter 2018)
Abstract
Nowadays, greater recognition of drought and introducing its monitoring systems, particularly for the short-term periods, and adding predictability to these systems, could lead to presentation of more effective strategies for the management of water resources allocation. In this research, it is tried to present appropriate models to predict drought in city of Semnan, Iran, using time series, adaptive neuro-fuzzy inference system (ANFIS) and artificial neural networks (MLP and RBF). For these modeling processes, average monthly meteorological parameters of rainfall, temperature, minimum temperature, maximum temperature, relative humidity, minimum relative humidity, maximum relative humidity and SPI drought index were used during the period 1966 to 2013. The results showed that among the many developed models, the ANFIS model, with input data of average rainfall, maximum temperature, SPI and its last-month value, 10 rules and Gaussian membership function, showed appropriate performance at each stage of training and testing. The values of RMSE, MAE and R at training stage were 0.777, 0.593 and 0.4, respectively, and at testing stage were 0.837, 0.644 and 0.362, respectively. Then, the input parameters of this model were predicted for the next 12 months using ARIMA model, and SPI values were predicted for the next 12 months. The ANN and time series methods with low difference in error values were ranked next, respectively. The input parameters SPI and temperature had better performance and rainfall parameter had weaker performance.
Z. Nazari, N. Khorasani, S. Feiznia, M. Karami,
Volume 22, Issue 1 (Spring 2018)
Abstract
The purpose of this research was source identification of aerosols in atmosphere using geochemical properties in the city of Kermanshah. The concentrations of twenty elements consisting of K, Na, Ca, P, Cu, Ni, Pb, Cd, Se, Zn, Fe, Mg, B, Cr, Co, As, Mo, V were analyzed by ICP for 55 soil samples (in the height range of 600-1600m) and 41 aerosols samples. Source identification of aerosels using geochemical tracers was performed in two steps. In the first step, appropriate combination of tracer elements with high ability in the resolation of aerosol sources was chosen using the means comparison test and discriminate analysis. In the second step, the multivariate mixing model was used to determine the contribution of aerosol sources (geological and geomorphology types) to the production of aerosols in the study area. The results obtained from determination of the contributions of sources of aerosols (geological and geomorphological types) showed the UF formation (consisting of red marl and sandstone), with the height of 0-1400 mand the slope of 0-5%, could be regarded as the main contributor to the production of aerosols located in the city of Qasreshirin.
S. F. Mousavi, H. R. Vaziri, H. Karami, O. Hadiani,
Volume 22, Issue 1 (Spring 2018)
Abstract
Exploitation of dam reservoirs is one of the major problems in the management of water resources. In this research, Crow Search Algorithm (CSA) was used for the first time to manage the operation of reservoirs. Also, the results related to the exploitation of the single-reservoir system of Shahid-Rajaei dam, located in Mazandaran province, northern Iran, which meets the downstream water demands, were compared to those obtained by applying the Particle Swarm and Genetic algorithms. Time reliability, volume reliability, vulnerability and reversibility indices, and a multi-criteria decision-making model were used to select the best algorithm. The results showed that the CSA obtained results close to the problem’s absolute optimal response, such that the average responses in the Crow, Particle Swarm and Genetic Algorithms were 99, 75 and 61 percent of the absolute optimal response, respectively. Besides, except for the time reliability index, the CSA had a better performance in the rest of the indices, as compared to Particle Swarm and Genetic Algorithms. The coefficient of variation of the obtained responses by CSA was 14 and 16 times smaller than the Genetic and Particle Swarm Algorithms, respectively. The multi-criteria decision-making model revealed that the CSA was ranked first, as compared to the other two algorithms, in the Shahid-Rajaei Reservoir's operation problem.
A. Karami, M. Homaee,
Volume 22, Issue 4 (Winter 2019)
Abstract
Quantitative description of the spatial variability of soil hydraulic characteristics is crucial for planning, management and the optimum application. Field measurement of infiltration is very expensive, time-consuming and laborious. Soil structure also important effects on water infiltration in the soil. The objectives of this study were to determine the spatial variability of water infiltration, to select the most appropriate infiltration model, to calculate the parameters of relevant models, and to quantify the soil structure by using the fractal geometry. Infiltration parameters were estimated by using some physical soil properties, as well as fractal parameters, in this research. To achieve these purposes, 161 sites were selected and their infiltration was measured by using the constant head double-ring infiltrometers method in a systematic array of 500*500 m. The observed infiltration data from all examined sites were fitted to three selected infiltration models. Soil bulk density (BD), soil water content, soil particle size distribution, soil aggregate size distribution (ASD), organic carbon content (OC), saturation percentage (SP), soil pH and electrical conductivity (EC) were also measured in all 161 sites. For the quantitative assessment of soil structure, the aggregate size distribution, fractal parameters of the Rieu and Sposito model as well as the mean weight diameters (MWD) and geometric mean diameter (GMD) were also obtained. The obtained results indicated that the infiltration rates of the studied areas had generally low basic infiltration rates (1.1-31.1 cm hr-1) for most sites with the average of 6.69 cm hr-1. According to all obtained results and based on the least-square method, the Philip model was selected as the best performing model to account for infiltration. The aggregate size distribution demonstrated a fractal behavior, and the infiltration parameters could be significantly correlated with the fractal parameters and other soil physical properties.
R. Azadikhah, M. Sedghiasl, E. Adhami, H. R. Owliaie, A. Karami, Sh. Saadipour,
Volume 23, Issue 2 (Summer 2019)
Abstract
The aim of this study was to evaluate the spatial distribution of soil infiltration using geostatistics methods in a regional scale on 400 hectares of Mansour Abad Plain, in Larestan region, Fars Province. Sampling and parameters measurement were done for 78 points in a regular grid with a distance of 100*100 meters; for these variables, the best variogram model between linear, exponential, Gaussian and spherical models with the highest R2 and the lowest error was determined using GS+ and ArcGIS software. In this study, soil infiltration (cm/min) using the double ring method and some other soil properties including soil electrical conductivity (dS/m), pH, saturation percentage (%SP), particle size percentage (sand, silt and clay), and calcium (meq/lit), magnesium (meq/lit), sodium (meq/lit) were measured and determined. The spatial distribution of Kostiakov and Philip models parameters and theri zoning were determined using the geostatistic method. The results showed that, among different soil properties, the final infiltration rate had a high degree of variability in the study area, and the decision was based on the usual averaging methods, which could have a lot of error. Among applied infiltration models, Kostiakov model and Philip model were the best empirical and physical infiltratin models, respectively, in the studied area. The best semivariogram model for the steady state infiltration rate was Philip model, with the coeficients of S and A, and a coefficient of Kostiakove model was gaussian; for the b coefficient, Kostiakove model was exponential. Spatial structure of the final infiltration rate, a and b coefficients of Kostiakove model, and S and A coefficients of the Philip model, was strong. The best interpolation method for the final infiltration rate was cokriging with the cofactor of silt percentage, for the S coefficient of Philip model was inverse distance weighting (IDW); for a and b coefficients of Kostiakove model, kriging and IDW were suitable, respectively.
A. Karami, K. Khavazi,
Volume 23, Issue 2 (Summer 2019)
Abstract
Due to unsuitable soil physical conditions, calcareous soils, and the existence of a huge amount of sulfur in the country, the study of sulfur effects on the soil structure and other soil properties is necessary. Therefore, the effects of different rates of sulfur including: 0, 750, 1500 and 3000 kg/ha, when accompanied by Halothiobacillus neapolitanus bacteria, on the soil properties in the corn-wheat rotation in two years were investigated. Parameters of soil pH, EC, sulphate, organic carbon, soil structure and wheat yield were measured. For the quantification of soil structure and quantity evaluation of sulfur effect on the soil structure, with measuring the aggregate size distribution, the mean weight diameter (MWD) and geometric mean diameter (GMD) of the aggregate indices, and the amounts of fractal dimension were determined. The r results indicated that with the progress of the experiment and further application of sulfur along with thiobacillus bacteria, aggregation and aggregate stability were increased. The effect of sulfur treatments on MWD and GMD was significant; based on quantification indices, it had 28 percent positive effect on the soil structure. Sulfur with 3 percent reduction of fractal dimension had a significantly positive effect on the soil structure. Application of sulfur decreased a small amount of soil pH and increased 12 percent of the soil EC and 40 percent of the soil sulphate. So soil structure improvement and reclamation of soil physical condition can be very effective on the soil conservation and sustainability of the production resources and the conservation of environment.
A. Rezaei Ahvanooei, H. Karami, F. Mousavi,
Volume 23, Issue 3 (Fall 2019)
Abstract
In this research, by using FLOW3D, the performance of non-linear (arced) piano key (PKW-NL) in plan and linear piano key weir (PKW-L), with equal length of weir, was compared. Results showed that nonlinearity of the weir caused 20% increase in the discharge coefficient. Investigating the velocity contours for these two weir models also showed that maximum velocity within the PKW-NL weir structure is about 30% lower than the PKW-L weir. Also, the performance of non-linear piano key weir was evaluated under inward (PKW-IC) and outward (PKW-OC) curvatures to the channel. Results showed that in the case of PKW-IC weir, the discharge coefficient was increased by 8% as compared to the PKW-OC weir. Investigating the pressure contours for these two weir models also shows that the average pressure within the PKW-IC weir structure is about 5% higher than the PKW-OC weir. This increase in pressure leads to a decrease in the speed and better distribution of flow over the weir keys.
M. Boustani, F. Mousavi, H. Karami, S. Farzin,
Volume 23, Issue 4 (Special Issue of Flood and Soil Erosion, Winter 2019)
Abstract
River discharge is among the influential factors on the operation of water resources systems and the design of hydraulic structures, such as dams; so the study of it is of great importance. Several effective factors on this non-linear phenomenon have caused the discharge to be assumed as being accidental. According to the basics the chaos theory, the seemingly random and chaotic systems have regular patterns that are predictable. In this research, by using methods of phase space mapping, correlation dimension, largest Lyapunov exponent and Fourier spectrum power, a period covering 43 years of Zayandehrud River discharge (1971-2013) was evaluated and analyzed based on the chaos theory. According to the results, the non-integer value of the correlation dimension for Eskandari and Ghale Shahrokh stations (3.34 and 3.6) showed that there was a chaotic behavior in the upstream of Zayandehrud-Dam Reservoir. On the other hand, in the Tanzimi-Dam station, the correlation dimension curve was ascending with respect to the embedding dimension, showing that the studied time-series in the downstream of Zayandehrud-Dam Reservoir was random. The slope of the Lyapunov exponent curve for Eskandari, Ghale Shahrokh and Tanzimi-Dam stations was 0.0104, 0.017 and 0.0192, respectively, and the prediction horizon in the chaotic stations was 96 and 59 days. The non-periodical feature of time series was studied by using the Fourier spectrum power. The wide bandwidth, besides other indices, showed that river discharge in the upstream stations of Zayandehrud Reservoir was chaotic.
A. Atarodi, H. Karami, A. Ardeshir, Kh. Hosseini,
Volume 24, Issue 1 (Spring 2020)
Abstract
In general, engineering designs need to optimize the factors affecting the under-study phenomenon; however, this is often a costly and time-consuming process. In this regard, new methods have been developed to optimize with fewer tests; thus, they can make the whole process more affordable. In this study, Taguchi and Taguchi-GRA methods were used to design the geometric parameters of the protective spur dike in order to optimize their efficiency in reducing the scouring in a series of spur dikes. The results of both methods showed the optimal ratio of the length of the protective spur dike to the length of the first spur dike was 2.5 and the angle of the protective spur dike was 90 °. However, the ratio of the length of the protective spur dike to the length of the main spur dike in the Taguchi method was 0.8 and in the Taguchi-GRA method, it was 0.6. In addition, using variance analysis showed that the distance between the protective spur dike from the first spur dike, the protective spur dike angle, and the length of the protective spur dike were, respectively, the most effective on the performance of the protective spur dike. The results of this study, therefore, indicate that both methods are highly effective in optimization and, therefore, can be useful in the hydraulic engineer studies.
M. J. Rousta, S. Afzalinia, A. Karami,
Volume 24, Issue 1 (Spring 2020)
Abstract
Given the various advantages of applying conservation tillage methods in the agriculture, including reducing the effects of climate change by decreasing the carbon dioxide emissions to the atmosphere caused by carbon sequestration in soil, this study was conducted with two wheat-cotton and wheat-sesame rotations at Agricultural Research Station Bakhtajerd, in Darab, the southeast of Fars Province, which had a warm and dry climate; this work was carried out in a loam soil during four years. The aim of this investigation was to compare the carbon sequestration (CS) in the soil after application of different conservation tillage methods with the conventional method. The results showed that in wheat-cotton rotation, the maximum and minimum amount of CS in the 0-20 cm depth of soil with the average 17.160 and 13.810 t/ha could be obtained by using no-till and conventional tillage, respectively. Therefore, no-till increased CS by 24.26% in wheat and cotton cultivation, as compared to the conventional tillage. The economic value of this CS increment for the environment was $2459 per hectare. In the wheat-sesame rotation, the highest and lowest CS was obtained with an average of 25.850 and 12.505 t/ha in no-till and conventional tillage, respectively. Namely, direct seeding of wheat and sesame increased the CS at the 0-20 cm depth of soil by 107%, as compared to the conventional tillage with the economic value of $9809.5 per hectare. Under similar conditions, in wheat-cotton and wheat-sesame rotations, the conventional methods could be replaced by no tillage.
