Showing 345 results for Soil
A. Malekian1, A.a. Jafarazdeh, Sh. Oustan, M. Servati,
Volume 26, Issue 2 (9-2022)
Abstract
To study the soil-landscape change in the Chaldoran region, 9 representative soil profiles were studied in 5 dominant geomorphic units of the study area including piedmont plain, mantled pediment, alluvial fan, plain, and flood plain. The results showed that the accumulation of pedogenic carbonate in some soils was concretion and light in color. In control soils in the piedmont plain (profile 5 and 7), mantled pediment (profile 6), and flood plain (profile 8) clay transferred from the surface horizons and accumulated in the lower horizon, due to relatively good rainfall in the region and distinct dry and wet seasons has led to the formation of argillic horizons along with the formation of crust on the surfaces of aggregates and building units and has formed the Alfisoils order. Mineralogical results showed the presence of chlorite, illite, kaolinite, and smectite minerals. According to the evidence, illite, chlorite, and kaolinite minerals were inherited and smectite minerals were formed due to weathering and evolution of illite, chlorite, or palygorskite minerals. Also, the results of the CIA index in the region indicated that the soils of the region are in the stage of weak to moderate weathering. In general, the results indicated the critical role of drainage, land use, and parent materials in the soils of the study area.
I. Hasanpour, M. Shirvani, M.a. Hajabbasi, M.m. Majidi,
Volume 26, Issue 2 (9-2022)
Abstract
Low organic matter content and alkaline pH of calcareous soils in arid and semi-arid regions are the main reasons for the low nutrient availabilities for plants in these soils. One way to improve the chemical properties and fertility of calcareous soils is the application of organic substances such as biochar produced from pyrolysis of organic wastes. However, biochars have an almost predominant alkaline pH, which exacerbates plant nutrient deficiencies in calcareous soils when used for a long time. Pyrolysis of some organic wastes under controlled temperature conditions can lead to the production of acidic biochar. The effect of acidic biochars on several chemical properties of two calcareous soils in Isfahan province was investigated in the present study. Treatments included two types of biochar (pine cone and rice husk), three levels of biochar addition (one, three, and six percent), two types of soil (a sandy loam (Tiran) and a clay loam (Lavark)), and two incubation periods (one and six months). The results showed that applying biochar could slightly decrease soil pH but raised soil electrical conductivity. In addition, the amount of organic carbon, total nitrogen, and available concentration of manganese in all treatments and the concentrations of available phosphorus, potassium, iron, zinc, and copper in the most of treatments showed a significant increase compared to the control. Amending soil with biochar at a 6% rate caused the most significant changes in the measured parameters in both soil types. In general, the results of this study indicated that acidic biochar produced from pine cones and rice husk can be used as a suitable conditioner to improve the chemical properties and fertility of calcareous soils.
F. Golabkesh, A. Nazarpour, N. Ghanavati, T. Babaeinejad,
Volume 26, Issue 2 (9-2022)
Abstract
The current study aims to find the best methods of using remote sensing and supervised classification algorithms in long-term salinity monitoring of salinity changes in the Atabieh area with an area of 5000 hectares in the west of Khuzestan province. The procedure is based on the separation of different levels of saline soils utilizing information obtained from Landsat 7 and 8 satellite images (2001 to 2015) along with salinity data taken from the study area, and salinity indices including SI1, SI2, SI3, NDSI, IPVI, and VSSI. The results show the expansion of the saline zone trend in the soils of the study area, among which, soils with EC of more than 16 dS m-1 (very saline) have the highest frequency. The area of saline soils has increased significantly over the past 15 years, with a saline land area increasing by more than 90%. The percentage of salinity class is low (S1). According to this study, the only significant index in soil salinity at a 95% confidence level is the SI3 index, which has been able to have a good estimate of the increasing changes in soils in the region. The results of the supervised classification showed that the support vector machine (with an overall accuracy of 95.78 and a kappa coefficient of 0.89) is more accurate. After the vector machine method, the methods of minimum distance, maximum likelihood, and distance of Mahalanobis have the highest accuracy, respectively. Based on salinity maps obtained in years in 2001, 2005, 2010, and 2015, it can be said that the salinity rate in the whole of the study area was progressing and at the same time the salinity area in the middle and high classes increased decreased and on the other hand, the salinity area in the high class in 2001 gradually increased and distributed in 2015 throughout the region.
S. Dehghani, M. Naderi Khorasgani, A. Karimi,
Volume 26, Issue 3 (12-2022)
Abstract
Knowledge of the distribution of heavy metal concentrations in different components of soil particles is significant to assess the risk of heavy metals. The objective of this study was to evaluate some pollution indices and spatial variations in their estimation in different components of soil particle size fractions (<2000 and> 63 μm) in the Baghan watershed in the southeast of Bushehr province with an area of about 929 square kilometers. The location of 120 surficial composite soil samples (0-20 cm) was determined by using the Latin hypercube method. Soil pollution was assessed using geochemical indices of contamination factor (CF) and pollution load index (PLI). The kriging method was used in the Arc GIS software to interpolate the spatial variations of CF and PLI. Based on the results, the CF displayed the particles in the size < 2000 microns compared to all metals in moderate pollution conditions (1≤CF <3) and with the fineness of soil particles (particles with a diameter <63 microns) concerning to Cd metal shows significant contamination status and moderate pollution with other metals, respectively. CFZn, CFCu, and CFFe in particle size <2000 microns and CFPb in finer class were fitted with a spherical model and other metal contamination coefficients with an exponential model. CFCd and CFFe have the highest impact ranges at <2000 and < 63 microns, respectively. The results of this research confirm that corrective operation is needed to monitor cadmium status in the studied area.
E. Masoumi, R. Ajalloeian, A.a. Nourbakhsh, M. Bayat,
Volume 26, Issue 3 (12-2022)
Abstract
Since clay is widely used in most construction projects, the issue of improving clay soils has considerable importance. This study aimed to optimize the variables affecting the properties of geopolymer and improve their mechanical properties using Isfahan blast furnace slag. Taguchi's statistical design method was used to model three process variables (blast furnace slag, water, and alkali sodium hydroxide agent) with four different values in the mixing design. Geopolymer was used to optimize the uniaxial compressive strength. Sixteen geopolymer compositions determined by mini-tab software were prepared and their uniaxial compressive strength was measured. The obtained results were modeled by analysis of variance, and then the interactions of the three variables on the uniaxial compressive strength of geopolymer were investigated using two and 3D diagrams. Then, the variables were optimized and the proposed values for the optimal sample were examined at temperatures of 25, 50, and 70°C and at times of 3, 7, 14, and 28 days of operation. A comparison of the results predicted by the models and the results of the experiments confirmed the validity of the models. Also, the scanning electron microscopy (SEM) images showed that the porosity will reduce from 7 to 28 days. It indicated that the use of the geopolymerization method has a significant role in stabilizing weak clay soils with low plasticity. The effect of fibers and geopolymer to reinforce was also investigated and for better evaluation, it was compared with soil stabilization with Portland cement. The results showed that in the most optimal geopolymer composition, the bearing resistance of clay has increased by more than 3400%. Meanwhile, fibers along with geopolymer with optimal percentage and length (0.1% by weight of geopolymer composition and length of 12 mm) were able to increase the uniaxial compressive strength of clay by nearly 4000%, which shows the excellent effect of using cellular fibers parameter whit the geopolymer in this research.
Mrs Soghra Bagheri, M.r. Ansari, A. Norouzi,
Volume 26, Issue 3 (12-2022)
Abstract
Soil erosion has been one of the most important problems of watersheds in the world and is considered one of the main obstacles to achieving sustainable development in agriculture and natural resources. Identifying and prioritizing regions sensitive to soil erosion is essential for water and soil conservation and natural resource management in watersheds. The present research was performed in 2021 year to prioritize the soil erosion susceptibility in 12 sub-watersheds of the Roudzard watershed in Khouzestan province using morphometric analysis and multiple criteria decision-making (MCDM) methods. In this regard, 11 morphometric parameters including shape parameters such as compactness constant (Cc), circularity ratio (Rc), form factor (Rf), elongation ratio (Re), linear parameters such as drainage density (Dd), stream frequency (Fs), drainage texture (Dt), bifurcation ratio (Rb), Basin length (L), Length of overland flow (Lg), and topographic parameter including Ruggedness number (Rn) were extracted and their relative weights were calculated using Analytic Hierarchy Process (AHP). The prioritization sub-watershed to soil erosion was performed using TOPSIS, VIKOR, and SAW methods, and the results were combined using rank mean, Copeland, and Borda methods. The final prioritization was compared with the amount of specific erosion in the MPSIAC model by determining Spearman's correlation coefficient. The result of the evaluation of morphometric parameters by using the AHP model showed that drainage density (0.161), drainage texture (0.158), and stream frequency (0.146) had the greatest effect on the erodability of the sub-watersheds. In contrast, the form factor (0.049), Elongation Ratio (0.036), and shape factor (0.026) had the least effects on erodability of the study area. In this research, the Spearman correlation coefficient between the final result of prioritizing the sub-watershed and the MPSIAC model was obtained as 0.8 in p-value<0.01. The results of prioritization of the sub-watersheds in terms of their sensitivity to soil erosion showed that sub-watersheds 11, 12, and 10 with an area of 191.83 km2 are categorized as very sensitive to soil erosion due to high value of linear parameters, low value of shape parameters, sensitive geology formation, and poor vegetation cover and located in rank 1 to 3, respectively. According to the results sub-watersheds 11, 12, and 10 have the highest amount of specific erosion equal to 16.03, 12.48, and 11.6 tons per hectare per year, respectively. Therefore, these sub-watersheds are a priority for watershed management operations. The results of the present study showed that MCDM methods and morphometric analysis are suitable tools for identifying areas sensitive to soil erosion and using the combined methods of the results and it is possible to take advantage of each of the different multi-criteria decision-making methods.
A. Balvaieh, L. Gholami, F. Shokrian, A, Kavian,
Volume 26, Issue 4 (3-2023)
Abstract
Changes in nutrient concentrations of soil can specify optimal management of manure and prevent environmental and water resources pollution. The present study was conducted with the objective of changing macronutrients concentrations of Nitrogen, Phosphorus, and Potassium with amendments application of polyvinyl acetate, bean residual, and a combination of polyvinyl acetate + bean residual for time periods of one, two, and four months. The results showed that the application of soil amendments had various effects on changing Nitrogen, Phosphorus, and Potassium. The maximum amount of Nitrogen related to the treatment of bean residual at the time period of four months before simulation (with a rate of 44.62 percent) and minimum amount of nitrogen related to Polyvinyl acetate treatment at the time period of one month (with a rate of -1.92 percent). The minimum rate of Phosphorus was measured at the treatment of bean residual at the time period of one month before simulation (with a rate of 0.95 percent). The maximum amount of Potassium related to the treatment of Polyvinyl acetate at the time period of four months before simulation (with a rate of 189.35 percent) and the minimum amount of Potassium related to the combination of bean residual + Polyvinyl acetate at the time period of one month after simulation (with a rate of 40.66 percent). Therefore, the application of amendments has various effects on changing soil macronutrients at different time periods.
F. Zarei, M.r. Nouri Emamzadehei, A.r. Ghasemi Dastgerdi, A. Shahnazari,
Volume 26, Issue 4 (3-2023)
Abstract
The pattern of root distribution in layered soils is one of the significant issues in the calculations of soil water and irrigation management and planning. The objective of this study was to determine the pattern of root distribution of soybean in layered soils and its effect on water uptake. The research was conducted in a completely randomized design with 15 treatments consisting of three different textures of soil (light, heavy, and medium) in four replications. The pattern of root distribution was monitored by the sampling of columns at the end of the growth period of the soybean. It was observed that the presence of the layer with medium texture has led to better plant development and growth after comparing the treatments in terms of plant growth. In general, root length density decreased with increasing soil depth, except in cases where there were different layers of soil, and root length density takes place in the following order: root length density in layers with medium texture≥ heavy texture≥ light texture. The rate of root water uptake rate was highest in the sandy layers, intermediate in clay, and lowest in loamy texture. Also, the rate of root water uptake rate increased significantly with increasing depth regardless of treatments. It can be concluded that the pattern of root distribution and plant growth is significantly affected by soil texture and its stratification.
M. Farzamnia, M. Miran Zadeh,
Volume 26, Issue 4 (3-2023)
Abstract
The present study was carried out in the Mahyar region of Esfahan Province to determine optimum drip tape spacing for the wheat crops on a silty clay loam soil respecting grain yield as well as yield components, water use efficiency, and variations in the salinity within the soil profile. The experiment was performed for three years from 2017 to 2019 with a randomized complete block design with three replicates and four treatments. The treatments consisted of three tape spacings (A) at 45, (B) at 60, (C) at 75 cm, and the Control (D) was irrigated with the basin method. The same volume of irrigated water was applied to the drip treatments, A, B, and C in every irrigation interval, whereas for treatment D, the local farmers’ practice was followed. Based on the results from compound variance analysis, the treatment effect on both grain yield and biological yield, and on water use efficiency and harvest index was significant at 1% and 5% level of confidence, respectively. The mean water use efficiency in treatments A, B, C, and D was measured as 0.79, 0.79, 0.73, and 0.78 kg m-3; thus, treatments A, B, and D outperformed treatment C. A comparison between the salinity of the soil profile at the beginning and the end of the growing season revealed that the basin irrigation method was more effective on salt leaching than the drip tape system. The results of this study indicated that concerning water use efficiency and crop yield, drip tapes spaced at 45 or 60 cm outperformed those which were 75 cm apart. On the other hand, the work required for irrigation system installation as well as the amount of drip tape residues left on the field at the end of the growing season is larger for tapes spaced at 45 cm compared to those which are 60 cm apart. This will have a significant impact on farmers’ budgets and environmental issues. Therefore, it is recommended to lay the tapes 60 cm apart for the irrigation of wheat crops on silty clay loam soils.
N. Moradian Paik, S. Jafari,
Volume 26, Issue 4 (3-2023)
Abstract
Changes in land quality factors were investigated according to the change in land use of two conventional cropping systems in Khuzestan (Dimcheh region, periodic cultivation system, sugarcane, forest, and deforesting in Zaras region). The results showed that by the change of forest land use, organic carbon from 0.93 to 0.55%, cation exchange capacity (CEC) from 19.6 to 13.3 cmol/kg, C/N from 7.4 to 3.8%, the mean weight diameter of aggregate (MWD) from 1.7 to 1.3%, and microbial respiration from 0.11 to 0.06 mg of CO2 /gr of soil per day decreased and in contrast, the dispersible clay from 4.6 to 19.3% increased. PCA analysis for the parameters showed that five factors justified more than 90% of the variance in the values of FC, PWP, AW, and AF. In the Dimcheh region, the average volumetric moisture content of FC from 31.3% to 27.3%, available water from 12.9% to 9.8%, dispersible clay from 56.1% to 12.3%, and bulk density reduced from 1.6 to 1.4%, organic carbon from 0.45 to 0.78%, C/N from 6.3 to 10.0%, microbial respiration from 0.01 to 0.04 mg of CO2 /gr soil per day and MWD of aggregates increased from 0.77 to 1.3 mm. Five factors including FC, AW, BD, DC, and OM explained more than 90% of the variance.
E. Javiz, A. Jalalian, M.r. Mosaddeghi, E. Chavoshi, N. Honarjoo,
Volume 26, Issue 4 (3-2023)
Abstract
One of the most significant environmental crises in arid, semi-arid, sub-humid, and even humid regions is the destructive phenomenon of desertification and in the arid and semi-arid regions is wind erosion. These problems exist in large areas of Iran and it is necessary to use an environmentally friendly and economic method to solve this problem. In this study, calcium bentonite clay was used for the first time in Iran and perhaps in the worlds in the critical region of Sajzi, which covers an area of 65 hectares. Experiments were performed on the crusts after one year of mulching with bentonite clay. The results showed that wind erosion has a negative and significant correlation with the mean weight diameter and geometric weight diameter of aggregate, aggregates with diameters greater than 0.25 mm, shear strength, and penetration resistance. On the other hand, the results of the permeability test using double-ring and by three models (Kostiakov, Horton, and Philip) showed that the lowest mean square error (SSE) and the highest coefficient of determination (R2) belonged to the Kostiakov model in the mulch-applied and control samples. This result indicated the superiority of the Kostiakov model compared to Horton and Philip's models. Wind erosion intensity was also measured in situ using a portable wind tunnel at 20 points in the Sajzi region. The findings showed that mulch application has controlled more than 95% of soil erosion.
H. Ghazvinian, H. Karami,
Volume 26, Issue 4 (3-2023)
Abstract
Runoff is formed by spending some time after rain and significantly depends on rainfall intensity, soil moisture, and slope. One of the fundamental questions about runoff is the time that it starts to create. In this research, the runoff start time in sandy loam soil was evaluated experimentally under different conditions using a precipitation simulator machine. The rainfall intensity parameters of (60, 80, and 100 millimeters per hour) and the slope of (0 and 5 percent) were investigated. The rainfall was created in the three soil treatment types completely dry (Sdry), the dry soil that had been saturated 24 hours before the test (S24hrlag), and the dry soil that had been saturated 48 hours before the test (S48hrlag). Eighteen tests were conducted on this soil. At the end of each test, the soil moisture was measured. The experimental results were compared with the numerical model of Green-Ampt. According to the Kendall and Spearman correlation test results, as the rainfall be intense, the start time of the runoff is lower. Also, the runoff starts at a faster time in the slope of 5 percent for every three types of soil. Also, the results of starting time of the runoff in the soil with a delay of 48 hours in the rain compared to the soil with a delay of 24 hours in the rain are closer in all of the rainfall intensity and slopes compared to the case of dry soil. Therefore, in the experiments related to a delay of 24 hours, the time of the start of runoff decreases. While in tests with a delay of 48 hours, it was not much different from completely dry soil. Also, the Green-Ampt results are close to the experimental results (R2=0.9775), and the maximum difference between the two mentioned methods is 4.8 minutes. Therefore, it can be used with the Green-Ampt method to calculate the start time of runoff in sandy loam soil in different states of rainfall intensity and bed slope.
R. Mousavai, M. Rasouli Sadaghiani, E. Sepehr, M. Barin,
Volume 27, Issue 1 (5-2023)
Abstract
can provide useful information about P adsorption and the factors affecting it. A batch experiment was performed with phosphorus concentrations (0 to 35 mg/L) in two soils with different electrical conductivity (EC) (2 and 15 dSm-1) by a variety of biochar treatments including simple apple-grape biochar (BC), rock phosphate- biochar (BC-RP), enriched-biochar (BC-H3PO4-RP), enriched-biochar (BC-HCl-RP), triple superphosphate (TSP), and control (Cont). The results indicated that phosphorus sorption capacity varied between the soils. Biochar treatments were effective in reducing the phosphorus adsorption of both soils. Due to BC-H3PO4-RP and BC-HCl-RP treatments, the maximum phosphorus adsorption of soils decreased in S1 soil by 14 and 23 % and in S2 soil by 26 and 19%, respectively. Also, the use of these treatments decreased the parameters of Langmuir absorption intensity (KL) of S1 soil to 0.085 and 0.066, respectively and S2 soil to 0.11 and 0.15, L/mg respectively, and Freundlich absorption capacity (KF) of S1 soil decreased to 19.2 and 22.5 and S2 soil to 28.2 and 28.1 L/kg, respectively. Enriched biochars significantly reduced the buffering indices of both soils indicating phosphorus adsorption decreased and increased the availability of phosphorus for the plant. The standard phosphorus requirement of S2 soil was lower than S1 soil by both equations. Therefore, enriched biochar can be an effective strategy to increase phosphorus availability and reduce the use of chemical fertilizers in saline and non-saline conditions; however, more field studies are needed for a clear understanding of the potential of P-enriched biochar as a fertilizer alternative.
S. Falahati, E. Adhami, H. Owliaie,
Volume 27, Issue 1 (5-2023)
Abstract
Due to the importance of nickel (Ni), and the effect of common soil additives on Ni fractions distribution, the present study was conducted to evaluate the effect of zeolite and vermicompost on nickel fractions over time. The experimental design consisted of a factorial combination of two levels of vermicompost (zero and 2% by weight), three levels of zeolite (zero, 4% by weight of Firoozkooh zeolite, and 4% by weight of Semnan zeolite), and two soil texture (clay and sandy loam) in a completely randomized design in triplicates. Treatments were contaminated with 50 and 100 mg nickel/kg soil. Ni fractions were extracted and measured at 20 and 60 days. The results showed that in initial soils, Car-Ni in sandy loam soil was higher than in clay soil, while the content of Fe, Mn- Ox Ni, OM-Ni, and Res-Ni in the clay soil was higher. In sandy loam soil, more nickel was recovered in Exch- and Car-fractions, while nickel recovery was higher in Mn, Fe-Ox Ni, OM-Ni, and Res-Ni in the clay texture. Zeolite addition caused a significant decrease of Exch- and Car-Ni in the clay soil on 60d and 100 mg/kg Ni level. Exch-Ni was reduced due to vermicompost application. Vermicompost application caused the decrease in Fe, Mn Ox-Ni in both studied soils and times, and OM-Ni increased by vermicompost application. Aging generally reduces the Exch-Ni but changes in Car-Ni over time depending on the soil texture. Aging did not affect Mn, Fe-Ox Ni, and Res-Ni, while OM-Ni increased over time in clay soil.
M. Dehghanian, H. Tabatabaee, H. Shirani, F. Nikookhah,
Volume 27, Issue 1 (5-2023)
Abstract
In sustainable agriculture, cow manure is used for greater productivity, a rich source of E-Coli pathogenic bacteria. The objective of this research was to investigate the simultaneous effect of the fractionation size of cattle manure and irrigation water salinity on the retention of E-Coli bacteria in the depths of the sand column with a height of 10 cm under saturated flow. Four different particle fractions of cow manure (1-2, 0.5-1, 0.25-0.5, and smaller than 0.25 mm) were added to the surface of the sand column at the scale of 30 tons per hectare, then leaching was done with different salinities (0, 0.5, 2.5, 5, and 10 dS/m) up to 10 pore volumes, then samples were taken from the depths of 0, 3, 6, and 12 cm. The number of bacteria in each sample was determined by the live counting method. The results showed that the effect of all sources of change and their interaction effects on the retention of bacteria in the soil is significant at the level of 5%. Salinity had a negative effect on the retention of bacteria, and the highest and lowest values of the relative concentration of bacteria (the result of dividing the number of bacteria in each soil depth by the initial number of bacteria in the desired manure treatment) were in 0 dS/m and 10 dS/m salinity of leaching water, respectively. By decreasing the size of cow manure particles due to the increase in hydrophobicity and blocking of preferential pores, the retention of bacteria decreased in all investigated soil depths. The highest and lowest retention of bacteria in the soil were investigated in the largest cow manure particle size (1-2 mm) and the smallest cow manure particle size (less than 0.25 mm), respectively. In addition, the highest relative concentration of bacteria in the soil was seen in the depth of 0-3 cm, and no significant difference was seen in other soil depths.
A.r. Eftekhari, M. Mirmohammad Sadeghi, A. Jalalian,
Volume 27, Issue 2 (9-2023)
Abstract
The use of biotechnology-based methods in the field of geotechnical engineering has led to the birth of new knowledge of biogeotechnology and several studies have been conducted using this new knowledge in various geotechnical issues including reducing permeability and increasing shear strength, especially in sandy soils and the desired results have been obtained. Nevertheless, little research has been done using biogeotechnology in the field of improving the mechanical properties of clay soils, especially in reducing the swelling of expansive soils, which is considered one of the types of problematic soils. The main cause of swelling of expansive soils is the presence of montmorillonite clays in these types of soils. Using chemical additives to stabilize expansive soils such as lime and cement is a common practice. However, environmental concerns related to greenhouse gas production caused by the production of chemical substances and the destructive effects of these substances on the environment and soils have encouraged researchers to use other sustainable stabilization alternatives. Microbial Induced Carbonate Precipitation (MICP) is a technique that can be a promising solution to solve this problem. The objective of the present study was to investigate the effect of the MICP method on the swelling of expansive clay soils and its effect on the mechanical strength of this type of soil. One-dimensional swelling tests, uniaxial compressive strength tests, and Atterberg limits tests were performed on clay soil with a liquid limit of 53 using Sporosarcina pasteurii bacteria, calcium chloride, and urea as nutrients. Taguchi's method was used for the design of the experiments and the statistical analysis of the results. This method designs experiments through partial factorial and reduces their number without a significant effect on the results. Bacterial concentration, nutrient molarity ratio, treatment time, and soil moisture were selected as four factors with Four levels of variation. The results showed that the (MICP) method was effective in reducing the swelling potential of expansive soils and also caused a significant increase in the unconfined compressive strength of the soil and its undrained shear strength.
D. Khatibi Roudbarsara, A. Khaledi Darvishan, J. Alavi,
Volume 27, Issue 2 (9-2023)
Abstract
Soil erosion followed by sediment production is the most important phenomenon that causes soil and environment degradation in many areas and is increasing. Sediment fingerprinting is a method to identify sediment sources and determine the contribution of each source to sediment production. The present research was carried out to evaluate the relative erosion sensitivity of lithological units and to determine the contribution of each unit in bed sediment production using geochemical properties in the Vaz River located in Mazandaran province. The 33 soil samples were taken from the whole watershed and one sediment sample at the outlet of the watershed. Then, five tracers of B, Al, Sc, Mo, and Sn were selected as the optimal combination using three statistical tests range tests, Kruskal-Wallis, and discriminant function analysis. Finally, using optimal tracers and a combined multivariate model, the contribution of lithological units with very high (A), high (B), medium to high (C), and medium (D) sensitivity in bed sediment production were obtained using FingerPro statistical package and R software. The results showed that the contribution of lithological units with very high (A), high (B), medium to high (C), and medium (D) sensitivity in bed sediment production were 24.23, 50.77, 15.62, and 9.36%, respectively. Then, the specific contribution of each sensitivity class was also calculated to remove the effect of area on the results. The Qal lithological unit including the Quaternary sediments in the river bed and banks with very high sensitivity to erosion (A) and a specific contribution of 0.0807 % per hectare had the maximum contribution in bed sediment production in Vaz River.
Y. Gateazadeh, H.a. Kashkuli, D. Khodadadi Dehkordi, A. Mokhtaran, A. Assareh,
Volume 27, Issue 2 (9-2023)
Abstract
To monitor and compare the changes of salts in the soil profile around the roots of the corn plant, the plant yield, and the productivity of corn water, an Experimental was conducted in a completely randomized block of three repetitions in two crop years 2017-2018 and 2018-2019 at Ahvaz Agricultural Research Station. Experimental treatments included two subsurface drip irrigation systems with a working depth of 30 cm from the soil surface and tape irrigation and two irrigation intervals of 2 and 4 days. The results of monitoring soil solutes obtained from sampling depths (0-25, 25-50, and 75-50 cm) showed that soil salinity in the second year in both systems as a result of improving the quality of irrigation water from 3.61 dS/m to 2.01 dS/m, it was reduced by two times. The results of soil salinity monitoring showed the highest ratio of salinity reduction with a 2-day irrigation interval in both irrigation systems. The most leaching was done at the irrigation depth of 25-50 cm in the subsurface drip irrigation system and at the depth of 0-25 cm in the tape system. The highest yield of corn dry fodder was 9.13 and 7.13 tons per hectare, respectively, and the best water efficiency based on dry corn fodder at the rate of 13.74 kg/m was obtained in the strip drip irrigation system (tape) with a two-day irrigation interval and in the second crop year. Also, the results of the soil salinity measurement showed that the implementation and exploitation of the drip irrigation system can be the basis for improving the quality of the soil as the most important non-renewable resource of agriculture.
F. Meskini-Vishkaee, A.r. Jafarnejhadi, M. Goosheh, B. Delsooz Khaki, M. Javadzadeh,
Volume 27, Issue 3 (12-2023)
Abstract
One of the most common approaches for farm irrigation management is using soil readily available water and allowable depletion coefficient. The objective of this study was to determine wheat crop response coefficients, critical moisture content, and soil allowable depletion coefficient using a physically based method in three dominant soils under wheat cultivation in Khuzestan province. Treatments included full irrigation and water stress at three levels low, moderate, and high. The highest and lowest values of wheat crop response coefficient were related to silty clay loam (Ky=1.26) and clay loam (Ky=0.96), respectively. Critical soil moisture content was observed in loam soil (0.25 cm3cm-3)> silty clay loam (0.23 cm3cm-3)> clay loam (0.22 cm3cm-3), respectively. Despite the higher critical moisture content in loam, the most soil allowable depletion coefficient was also calculated in loam (0.54). Soil allowable depletion coefficient in silty clay loam and clay loam were 0.44 and 0.42, respectively. The results confirmed the simultaneous effects of soil and plant properties on the availability of soil water for the plants.
A.r. Vaezi, S. Rezaeipour, M. Babaakbari, F. Azarifam,
Volume 27, Issue 3 (12-2023)
Abstract
Improving soil physical properties and increasing water retention in the soil are management strategies in soil and water conservation and enhancing crop yield in rainfed lands. This study was conducted to investigate the role of tillage direction and wheat stubble mulch level in improving soil physical properties in rainfed land in Zanjan province. A field experiment was done at two tillage directions: up to the downslope and contour line, and five stubble mulch levels: zero, 25, 50, 75, and 100% of land cover equal to 6 tons per hectare. A total of 30 plots (2 m×5 m) were created. The results indicated that water infiltration and water content were considerably affected by tillage direction, whereas its effect on water holding capacity was not significant. This physical property of the soil was influenced by the inherent properties of the soil, including particle size distribution. The change of up to down tillage direction to the contour line increased soil infiltration to 11% and water content to 6%. The physical soil properties were wholly influenced by mulch consumption. Soil water content increased in mulch treatments along with water holding capacity and infiltration rate. The highest volumetric water content was at 100% mulch level (10.62%) which was 11% more than the control treatment. However, there was no significant difference between 100% and 75% mulch treatment. This revealed that the application of 75% stubble mulch in contouring tillage is a substantial strategy for improving soil physical properties and controlling water loss in rainfed lands of semi-arid regions.
