Search published articles


Showing 46 results for Moradi

M. A. Moradi, A. Rahimikhoob,
Volume 16, Issue 62 (Winte - 2013 2013)
Abstract

Reference evapotranspiration (ET0) is a necessary parameter for calculating crop water requirements and irrigation scheduling. In this study, a method was presented as ET0 is estimated with NOAA satellite imagery in the irrigation network. In this method, a pixel from a set of pixels within the irrigation network was chosen with the highest vegetation index, and its surface temperature (Ts) with extraterrestrial radiation parameter (Ra) was used as inputs of the model. The M5 model tree for converting Ta and Ra to ET0 was used as input variables. In this research, Gazvin irrigated area was selected as a case study. A total of 231 images of NOAA satellite related to irrigation season of the study area were used. The results obtained by the M5 model were compared with the Penman–Monteith results, and error values were found within acceptable limits. The coefficient of determination (R2), percentage root mean square error (PRMSE) and the percentage mean bias error (PMBE) were found to be 0.81, 8.5% and 2.5%, respectively, for the testing data set.
H. R. Moradi, M. Bakhshi Tiregani , S. H. R. Sadeghi,
Volume 16, Issue 62 (Winte - 2013 2013)
Abstract

Climate situation changes over a year cause changes in some soil characteristics and soil sensitivity to erosion. Investigation of these changes and how they impact on erosion can be of particular importance. This study investigated changes in Sediment Productivity and soil factors affecting these changes in Tiregan rangeland located in Daregaz city in Khorasan Razavi province. In this study, using the position of the upper and lower hillside of eastern and western aspects, the sampling with rain simulator was performed. Characteristic features of sediment yield including runoff threshold, runoff volume, sediment and turbidity were measured. Soil samples were taken from each sample rain simulation and features of the initial moisture content, bulk density, electrical conductivity, pH and organic matter were measured. Sample was collected with the same intensity and duration of the instrument with fixed locations, and was repeated in four seasons. In order to obtain the position and orientation of each of the parameters in the data obtained at different seasons, the combined analysis of variance test was used. The effect of each of these parameters and the difference between them were evaluated using the Tukey test, and the graphs in 2007 Excel software were plotted. The results showed that all the parameters of sediment yield during the year have significantly changed. The maximum amount of sediment production rates occurred in autumn and was gradually reduced. Its decreasing in both winter and spring can be attributed to vegetation in the area.
S.b. Sarvarinezhad, M. Bina, A. Moradi, H. Golayj,
Volume 17, Issue 63 (Spring 2013)
Abstract

Rubber dam body is a lying cylinder that lies in the width of channels, rivers and weir crests and is filled with water or air or a combination of both. Shape of this structure is one of the obvious features that does not change in the path of rivers or dam spillways. Rubber dams may be with or without deflectors. Deflector is a triangular or rectangular fin that is installed down the stream of the dam. The purpose of installing a deflector is separating the water from the rubber dam body and avoiding the reattachment between the water and dam body. In this study, four Physical models of rubber dams and deflectors were made at height and ratio of h/p=0.05 in 2 triangular and rectangular shapes and 25 cm length. Experiments were carried out in three different angles (30-45-60). After all the analyses and experiments were done according to the water napes profile and their lengths, it was observed that the 45 degree is more suitable than 30 and 60 degrees. In addition, experimental data and presented equation in this study were compared with the past equations, the results of which were close, showing the validity of the experiments and equations
Hamzeh Saeidian, Hamid Reza Moradi,
Volume 17, Issue 64 (summer 2013)
Abstract

The type and intensity of soil erosion in a region generally depend on climatic conditions, ups and downs, soil and land use. Of these, land use is most important. Using different systems of ploughing after unconscious and non-scientific change of land use affects soil physicochemical characteristics. This fact especially in marginal lands and mountainous regions is more visible. In order to investigate sensitivity to soil loss and erosion in various land uses of Aghajary deposits, part of Margha catchment with an area of 1609 hectares in Izeh city was selected. This was to determine the relationship between soil loss by rain simulator and some soil physicochemical characteristics like percentage of very fine sand, sand, clay, silt, pH, Ec, moisture, Calcium Carbonate and organic materials in different land uses. Then, sediment sampling in 7 points, three replicates and in various intensities of 0.75, 1 and 1.25 millimeters in minute in range, residential and agricultural land uses was done using rain simulator. In order to investigate effective factors in sediment production and erosion, samples of soil layers (in depth range of 0-20 cm meters) equal to the number of sediments were taken. For statistical analysis, EXCEL and SPSS 11.5 software were used. In total, the amount of runoff in residential land use was highest and in agriculture land use was lowest. The amount of sediment in agriculture land use was highest and in residential land use was lowest. Then, the most important factors in sediment yield were diagnosed by multi regression. The results showed that sediment yield and erodibility in land uses have meaningful differences in various intensities of precipitation. Regression models showed that in the production of sediment in various land uses, from among the measured factors, silt, sand very fine, lime, Ec, organic materials and pH had the greatest role. Sand percentage in the residential land use, and very fine sand and organic matter in agriculture land use had the most important role in sediment production. But in range land use, moisture percentage and pH had the biggest role in sediment production.
Zahra Saadati, Nader Pirmoradian, Mojtaba Rezaei,
Volume 17, Issue 64 (summer 2013)
Abstract

The modeling of yield response to water is expected to play an increasingly important role in the optimization of crop water productivity (WP) in agriculture. In this study, the CropSyst model was used to simulate two local rice varieties yield response under five irrigation treatments consisting of continuous flooding irrigation and irrigation at 0, 3, 6 and 9 days after the disappearance of water from the soil surface. The experiment was conducted at Rasht region during two growing seasons of 2003 and 2004. The model was calibrated using the first year data and validation of that was done using the second year data set. The result of F test shows that there was not a significant difference between the measured and simulated yield at confidence level of 99%. The relative errors of yield estimation were obtained between -0.81 to 12.58% and -2.4 to 19.42% for Binam and Hasani cultivars in 2003, respectively. These values were 0.83 to 16.4% and -2.82 to 21.27% in 2004, respectively. The results showed that due to the CropSyst model ability in simulating yield of rice under different irrigation regimes, this model can be used to explore management optimum options to improve rice water productivity
Y. Nabipoor, M. Vafakhah, H. R. Moradi,
Volume 18, Issue 67 (Spring 2014)
Abstract

The occurrence trend of floods in recent years shows that the most of Iran regions located in attacks of destructive floods and loss of life and property of flood damages is increasing. Watershed management practices (WMPs) are one of the superior and appropriate solutions for flood hazards mitigation. The impact of WMPs can be investigated using different approaches. In this study, the direct impact of WMPs was investigated using quantitative evaluation of flood characteristics for two periods, pre and post periods of measures implementation. Therefore, daily hydrograph of investigated periods and the results of flood analyses including number of floods occurrence, flood frequency percent in the different months and seasons were determined in Hajighoshan and Tamar hydrometery stations. Also, the mean continuing, rise and subsidence time of floods and maximum peak discharge of observed floods were investigated. The research results showed that the occurrence trend of floods had relatively increased. The number of floods has increased in post periods of measures implementation in two hydrometery stations, while WMPs effect on all flood characteristics were positive, as the continuing time of floods has increased with 0.5%, rise and subsidence time of floods and maximum peak discharge of floods have decreased with 7.9%, 21.98% and 70%, respectively. Totally, if WMPs volume pre watershed area isn't low, WMPs effect on flood characteristics will be positive.
F. Moradi, B. Khalilimoghadam, S. Jafari, S. Ghorbani Dashtaki,
Volume 18, Issue 69 (fall 2014)
Abstract

Soft computing techniques have been extensively studied and applied in the last three decades for scientific research and engineering computing. The purpose of this study was to investigate the abilities of multilayer perceptron neural network (MLP) and neuro-fuzzy (NF) techniques to estimate the soil-water retention curve (SWRC) from Khozestan sugarcane Agro-Industries data. Sensitivity analysis was used for determining the model inputs and appropriate data subset. Also, in this paper, the van Genuchten and Fredlund and xing models were used to predict SWRC. Measured soil variables included particle size distribution, organic matter, bulk density, calcium carbonate, sodium adsorption ratio, electrical conductivity, acidity, mean weight diameter, plastic and liquid limit, resistance of soil penetration, water saturation percentage and water content for matric potentials -33, -100, -500 and -1500 kPa. The results of this study in terms of various statistical indices indicated that both MLP and NF provide good predictions but the neural network provides better predictions than neuro-fuzzy model. For example, using MLP and NF models values of NMSE at prediction θs, θr, α, n and m in Fredlund and Xing equation corresponded to (0.059, 0.065), (0.154, 0.162), (0.109, 0.117), (0.129, 0.135) and (0.129, 0.145), respectively. Furthermore, α and n parameters at the first depth, and θr and α parameters at the second depth in Fredlund and Xing equation were estimated with higher accuracy compared with equivalent parameters in van Genuchten equation


Sh. Moradipour, H. Zeinivand, A. Bahremand, A. Najafinejad,
Volume 18, Issue 69 (fall 2014)
Abstract

Evaluation of hydrologic behaviour and soil erosion as an environmental crisis is important in order to maintain watershed ecological safety at optimum level. The aim of this study is to evaluate the performance of the distributed hydrological WetSpa model in simulating erosion and sediment transport and also sedigraph in Taleghan watershed, Iran. Base digital maps and daily meteorological time series data for 9 years are the major model inputs. The calibration of global parameters was done for the first 5 years and the model validation was carried out for 4 years considering three month warm-up period at the beginning of both calibration and validation periods. The Nash-Sutcliffe criterion for the calibration and validation periods pointed out the efficiency of model simulation (82.7% and 79%, respectively). The next phase, the erosion module was calibrated for erosion and sediment transport simulation. The results showed the Nash-Sutcliffe efficiency criterion (60% and 64% for suspended sediment concentration and transport, respectively). Overall, the evaluation results reveal the good ability of WetSpa model in simulation of the hydrological processes e.g., runoff, raindrop detachment, runoff detachment, net soil loss, etc., in a given time and space


H.r. Pourghasemi, H.r. Moradi, S.m. Fatemi Aghda,
Volume 18, Issue 70 (winter 2015)
Abstract

The objective of the current research was to prioritize effective factors in landslide occurrence and its susceptibility zonation using Shannon’s entropy index in North of Tehran metropolitan. To this end, 528 landslide locations were identified using satellite images such as Geoeye (2011-2012), SPOT-5 (2010), and field surveys, and then landslide inventory map was created for the study area in ArcGIS environment. Data layers such as slope degree, slope aspect, plan curvature, altitude, lithology, land use, distance of road, distance of fault, distance of drainage, drainage density, road density, sediment transport index (STI), stream power index (SPI), topographic wetness index (TWI), normalized difference vegetation index (NDVI), surface area ratio (SAR) and topographic position index (TPI) were created and the mentioned maps were digitized in GIS environment. Prioritization of effective factors by Shannon’s entropy index showed that the layers such as land use, lithology, slope degree, stream power index, and NDVI had the most effect on landslide occurrence. However, factors of topographic position index and plan curvature had the least effect. Also, landslide susceptibility zoning by the mentioned model and its accuracy assessment using relative operating characteristics (ROC) curve and 30 percent of landslide locations showed an accuracy of 82.83% with a standard error of 0.0233 in the study area.


H. Torabi, V. Moradinasab,
Volume 18, Issue 70 (winter 2015)
Abstract

Terraces are old geomorphic surfaces that are not related to present streams and are best places to study the effect of time on soil formation (chronosequence). This research was carried out to study some physico-chemical parameters especially different forms of iron as soil development indices on terraces of Karaj River in Hassan-Abad, southern Tehran. To determine soil development indices in 4 profiles occurring on 4 terraces, some physical and chemical properties were measured and free iron(Fed), aluminum(Ald), silica(Sid) and manganese(Mnd), amorphous Fe(Feo), Al(Alo), Si(Sio), Mn(Mno) and Fe, Al, Si-humus complexes were extracted. Results showed that clay, fine clay/total clay, CEC, the color redness and leaching of calcium carbonate increase toward higher terraces. Contents of Fed, Ald and Sid increases from lower terrace (T1) to the higher terrace (T4). Fed-Feo and Feo/Fed as the most important indices of soil development were enhanced and reduced from lower terrace (T1) to higher terrace (T4) soils, respectively, which indicate an increase in iron oxides crystalinity and soil profile development. Contents of Fed-Feo in the B horizons from T1 to T4 were 600, 800, 1000, and 1400 mg/kg soil, respectively. Calculation of Ferrihydrate and Fe-hydr(oxide) such as goethite and hematite showed that the amounts of these components were increased from T1 to T4 terraces confirming the variation of (Fed-Feo), (Feo/Fed) and (Feo-Fep) indices.


S. Shahmoradi, M. Afyuni, M. A. Hajabbasi, A. H. Khoshgoftarmanesh, M. Shirvani,
Volume 19, Issue 71 (spring 2015)
Abstract

In this work, the effect of raw and modified bentonite and zeolite with trivalent iron on the stabilization of water-soluble and adsorbed arsenic in a calcareous soil was studied. Raw and modified bentonite and zeolite were added to the soil in different weights in a completely randomized block design with three replications and kept to field capacity soil moisture content of 80% for 8 weeks. The concentrations of water-soluble and adsorbed arsenic, water-soluble and absorbed phosphorus in soil and soil pH were measured. Treatments significantly affected the mobility of arsenic and phosphorus in soil. Raw zeolite and bentonite in different levels increased arsenic mobility (about 107 to 325 % and 259 to 350% respectively). Despite the change in surface properties of zeolites modified with iron, this treatment at different levels increased arsenic mobility in soils by about 124 to 246%. Bentonite modified with iron had the greatest effect on reducing arsenic mobility in soil (about 91%). Phosphate mobility was similar to arsenic in different treatments.


V. Moradinasab, M. Shirvani, M. Shamsaee, M. R. Babaee,
Volume 19, Issue 74 (Winter 2016)
Abstract

Mobarakeh Steel Complex has been using treated industrial wastewater for irrigation of green space to combat water shortage and prevent environmental pollution. This study was performed to assess the impact of short-, middle-, and long-term wastewater irrigation on soil quality attributes in green space of this complex. Soils were sampled from the wet bulb produced by under-tree trickles in three depths of forested lands irrigated with treated wastewater (for 2, 6 and 18 years) or groundwater. Several chemical, physical and biological characteristics of the soil samples were determined in the laboratory and compared to those of the native unirrigated soils as the controls. The results showed that pH was significantly reduced in the wastewater-irrigated soils as compared to the control. Organic matter content and cation exchange capacity significantly increased in the irrigated soils due to the incorporation of tree leaves into soil. Soil salinity also increased as the irrigation period increased because of the relatively high salinity of water and wastewater used for irrigation. Microbial basal respiration and arginine ammonification were greater in the irrigated soils in comparison to the control. In general, forestation and irrigation management have improved most of the soil quality indexes in the Mobarakeh Steel Complex green space, but some soil characteristics, such as salinity, need to be monitored and improved in future.


F. Imani, M. Moradi, R. Basiri,
Volume 20, Issue 77 (Fall 2016)
Abstract

This study was done to evaluate the effect of afforestation in sand dunes at the vicinity of Shush, because of the importance of soil protection and wind erosion in sand dunes, also sand dunes afforestation as an effective and long lasting fixation mechanism. The study site was covered by petroleum mulch about 20 years ago and afforested by Prosopis juliflora. To study the effects of afforestation on sand dunes, two 10 ha afforested sites (25-50 and 75-100 percent canopy coverage) and control were selected. In each of studied site 15 plots were established and soil physiochemical properties were determined. Our result indicated that afforestation caused soil texture to change from sandy to sandy-loam. Also, soil phosphorus, potassium, organic carbon and nitrogen increased in 0-5 cm soil depth by afforestation that could be because of nutrient absorption from soil depth and returning to the surface by litter fall compared to the control. This study revealed that 25-50 percent canopy coverage resulted in better soil physiochemical properties compared to control site. In conclusion, sand dunes afforestation not only resulted in sand dunes fixation but also soil fertility and long lasting fixation.


S. Moradi Behbahani, M. Moradi, R. Basiri, J. Mirzaei,
Volume 20, Issue 78 (Winter 2017)
Abstract

Salt cedar is widely spread out in most part of the country but there is lack of information about its symbiosis with arbuscular mycorrhizal fungi. Then, the main objective of this study was to evaluate the symbiosis of AMF with salt cedar and its affectability by distance from river and soil physiochemical properties. For this purpose, riparian Maroon forest width was divided to three locations including riverside area, intermediate area and the area far from river with 200-hundred-meter interval. In each site 10 salt cedars were randomly selected and soil plus hair root samples were gathered from the salt cedar rhizosphere. Our result indicated that root colonization and spore density in the intermediate distance had the lowest and highest values, respectively. These values were significantly different compared to the other two sites. The average root colonization percent in the riverside area, intermediate area and the area far from river sites were 82.37, 73.77 and 80.17, respectively. While the average spore density in the riverside area, intermediate area and the area far from river were 189, 245.5 and 188.8 in five gram soils, respectively. Root colonization had significant positive correlation with soil potassium while spore density had significant correlation with studied soil physiochemical properties. Also, soil nitrogen, organic carbon, potassium and clay showed 52.6, 51.19, 50 and 23.4% decreasing trend from the riverside area to the area far from river. Regarding this research results, salt cedar showed high level of symbiosis with arbuscular mycorrhizal fungi but this symbiosis could be affected by distance from river in riparian forest.


Msc S. Shahmoradi, Dr M. Afyuni, Dr M. Hajabbasi, Dr A. H. Khoshgoftarmanesh, Dr M. Shirvani,
Volume 21, Issue 2 (Summer 2017)
Abstract

During last century, waste water of gold mine has accumulated heavy metals such as lead, zinc and cadmium in Zarshuran region soil, and thus has increased epidemic disease in this region drastically. The purpose of this research was to reduce the mobility and bioavailability of zinc, lead and cadmium in rhizosphere of sunflower grown in soil around the mine by inorganic sorbents. A pot experiments was carried out with three levels of raw zeolites (1, 6, 12 wt%), three levels of raw bentonite (1, 6, 12 wt%) and control (without sorbent) in a completely randomized block design with three replications. After cultivation, soil and plant samples were taken and the concentration of lead, cadmium and zinc in their samples were measured. Different levels of bentonite reduced the absorbable concentration of lead and zinc; and also reduced their absorbable concentrations in plant tissue, but had no significant effect on reducing absorbable concentration of cadmium.  Transfer factor for all three metals in the roots was more than shoot and reducing the concentration of heavy metals in the plant had no impact on plant growth. According to the study, level of 12 wt% of the raw bentonite was the most suitable sorbent for the stabilization of lead and zinc; and level of 12 wt% for raw zeolite was the best sorbent for stabilization of cadmium.

H. R. Moradi, M. Rahmati, H. Karimi,
Volume 22, Issue 1 (Spring 2018)
Abstract

Groundwater is a major source of drought. Karstic aquifers are important sources of groundwater in the West and Kermanshah province. This study was performed to investigate the effects of the meteorological drought on the karstic aquifer with different conditions of development. The studied areas in this research included two karstic aquifers, Bistoon-Parau and Patagh mountain in Kermanshah province. In this study, we used monthly precipitation and springs discharge during a period of 20 years.  Accordingly, the SPI and SDI indices were used to investigate the different states of meteorological and hydrological droughts, respectively. To determine the relationship between meteorological droughts and groundwater, Pearson correlation was used; aalso, to determine the time delay, the correlation between the different time conditions (no delay and delay 1 to 6 months) of the SDI index and the SPI index was investigated. The results of the relationship between the meteorological drought and groundwater showed that both had a significant correlation (p-value: 0.01). Also,  based on the results of the correlation between different time conditions (no delay and delay 1 to 6 months) ,the SDI index was compared to the SPI index, showing that the time delay between the occurrence of meteorological drought and groundwater in the studied areas without time delay or a maximum one-month delay had happened. Based on the results, Pearson correlation coefficients between the SPI and SDI indices in the Bistoon-Parav region were more than those of the Patagh mountain region indicating the development of the Bistoon-Parav karst region, as compared with the Patagh Mountain.

H. Shirani, S. Shirvani, M. Moradie,
Volume 22, Issue 2 (Summer 2018)
Abstract

In recent years, microbial contamination of surface and groundwater is a serious problem in some countries, leading to dangerous diseases. Soil salinity and irrigation water can affect the amount of transport or survival of bacteria in soil. In this study, the effect of different levels of salinity of irrigation water with EC: 0.5, 2.5, 6 ds/m and three manures including poultry manure, cow manure and the mixture of poultry and cow manure with 10 ton ha-1 on the transport of Escherchia coli was investigated in disturbed soil columns with 30cm height and 10cm diameter under unsteady-state water conditions. The concentration of Escherchia coli was measured. The severity of the effluent contamination of the treated columns with water salinity was 6 ds/m, which was less than that with the salinity of 2.5 and 0.5 ds/m. This difference was significant at the 0.01 probability level. Also, the effluent contamination of poultry manure-treated columns was greater than the cow manure and the mixed manure, and the contamination of mixed manure was greater than that of cow manure. The interaction of different salinity treatments on the concentration of Escherchia coli in different fertilizer treatments was significant at the 0.01 probability level. The results showed that the concentration of the released bacteria was affected by irrigation water salinity and with increasing the salinity, the concentration of the bacteria was reduced.

Z. Amiri, M. Gheysari, M. R. Mosaddeghi, M. S. Tabatabaei, M. Moradiannezhad,
Volume 23, Issue 2 (Summer 2019)
Abstract

Location of soil moisture sampling in irrigation management is of special importance due to the spatial variability of soil hydraulic characteristics and the development of root system. The objective of this study was determination of the suitable location for soil moisture sampling in drip-tape irrigation management, which is representative of the average moisture in the soil profile (θavg) as well. For this purpose, soil moisture distribution (θij) at the tassel stage of maize and one irrigation interval (68-73 day after plant) were measured at the end of season. The results showed more than 70% length of the root of plant was located in 30 cm of the soil depth. By accepting ±10% error in relation to the averaged soil moisture, some region of soil profile was determined which was in the acceptable error range and also near the averaged soil moisture (0.9θavgRec<1.1θavg). By overlapping θRec in one irrigation interval, the appropriate location for soil moisture sampling was the horizontal distance from drip-tape line to 20 cm and the depth of 10-20 cm from the soil surface. To determine the appropriate place for soil moisture sampling, the development of root system and the maximum concentrated root length density in the soil profile extracting the maximal soil moisture should be taken in to account, parallel with the averaged soil moisture.

M. Moradizadeh, K. Shirani,
Volume 23, Issue 4 (winter 2020)
Abstract

Water resources management depends on the precise assessment of water storage and access in each region, as well as environmental interactions of these resources. The man objective of this study was to delineate the potential zones of groundwater storage using FAHP. Mapping and assessment of it required maps of geomorphology, drainage, density, lineament density, slope and vegetation, which were initially prepared as the input layers in FAHP; the appropriate weights were attributed to them based on FAHP. Potential zones of ground water were classified into five classes of poor, average, good, very good and excellent. The number and density of available wells and springs in the study area dealt with the potential of the region for groundwater storage. So, ROC was used to assess the validation of results, considering spring points as signs of water resources. According to the results, classes of very good, good, average, weak, and very weak were ranked as the first to the last in terms of privilege order with an area of 37.7, 55, 40, 107, and 98.4 square kilometers, respectively.

Z. Moradi, E. Solgi,
Volume 23, Issue 4 (winter 2020)
Abstract

Sediments are the sink where various contaminants accumulate; they are an inseparable component of ecosystems; among heavy metals are very important because of their harmful effects on the ecosystems and their long extremely long persistency. The present study was conducted to determine the concentration and contamination degree of heavy metals (Iron, Zinc, Copper, Manganese and Nickel) in the coastal sediments of Bushehr Port. In order to sampling sediments, a distance of 10 km was considered. Acid digestion method was used to prepare the samples for metal analysis. Also, the physical properties of the sediments were measured using the standard methods. The metal enrichment and contamination status in the sediments were determined using the contamination degree (Cd), the modified degree of contamination (mCd), the contamination factor (CF), the enrichment factor (EF), and the geoaccumulation index (Igeo). Based on the results, the distribution of heavy metals in sediments were obtained as Ni Fe> Mn > Zn > Cu >. In the present study, due to the distance between Asalouyeh and Bushehr port, a low nickel concentration was obtained. The results of Igeo and other indices showed that the surface sediments of the study were uncontaminated. Comparison of heavy metals in Bushehr Port sediments with sediment quality standards showed that the concentration of metals in this study was less than the standard levels. As a result, the Coastline of Bushehr port was not contaminatied with iron, zinc, copper, manganese, and nickel metals. The study, therefore, indicated that although there were slight changes in these indices, the combination of the indices could give us a comprehensive cognition of heavy metals risks in the surface sediments of the Bushehr Port.


Page 2 from 3     

© 2024 CC BY-NC 4.0 | JWSS - Isfahan University of Technology

Designed & Developed by : Yektaweb