Search published articles


Showing 27 results for Akbari

M. Akbari,
Volume 24, Issue 4 (Winter 2021)
Abstract

The objective of this research was the development of a hydraulic-economic simulation-optimization model for the design of basin irrigation. This model performed hydraulic simulation (design of basin irrigation), using Volume Balance model, economic simulation through calculating sum of four seasonal costs and optimization using NSGAII multi-objective meta-heuristic algorithm. For programming, MATLAB programming software was applied. The optimizations of functional, multi-dimensional, static, constraint, continuous, multi-objective and meta-heuristic were applied for the optimization of the objective functions. Decision variables selected from simulation inputs were calculated in such a way that the  hydraulic objective function (minimizing linear combination of seven performance indicators) and economic objective function (total seasonal cost based on sum of water cost, labor cost, basin preparing cost and channel drilling cost) were minimized. Data of one the experimental field was used for the purpose of simulation. After initial simulation, optimization of the experimental field was done using NSGAII multi-objective meta-heuristic algorithm with tuned parameters. Optimization using the suggested model shoed the decrease (improvement) of objective functions rather than initial simulation performance. As a result, the suggested model could be regarded as is a specialized tool for basin irrigation, showing a good performance, despite its simplicity.

M. Ghodspour, M. Sarai Tabrizi, A. Saremi, H. Kardan Moghadam, M. Akbari,
Volume 25, Issue 3 (Fall 2021)
Abstract

The application of simulation-optimization models is a valuable tool for selecting the appropriate cropping pattern. The main objective of this research is to develop a two-objective simulation-optimization model to determine the pattern of cultivation and water allocation. The model performs the optimization with the multi-objective metamorphic algorithm (MOALO) after simulating different states of the cultivation pattern. The decision variables including land and water allocated to ten-day periods of plant growth were designed in a way that the minimum utilization of water resources and economic maximization were identified as target functions. The developed model was used to simulate and optimize the cultivation pattern with an area of ​​5500 hectares and water allocation of Semnan plain with renewable water at the rate of 60.8 million cubic meters. Harvesting scenarios of 80 (GW80) and 100 (GW100) percent of renewable groundwater and scenarios of change in existing cropping pattern of 30 (AC30) and 60 (AC60) percent were considered and each scenario was simulated with the MOALO algorithm. Optimization using the proposed model in four scenarios improved the water and economic objective functions compared to the initial simulation performance. The results showed that the four proposed scenarios were obtained by minimizing the water objective function and maximizing the economic objective function relative to the current situation (simulation). In general, the proposed model had a good performance despite its simplicity, which is a specialized tool to optimize the crop pattern with water allocation.

N. Pourabdollah, J. Abedi Koupai, M. Heidarpour, M. Akbari,
Volume 25, Issue 4 (Winiter 2022)
Abstract

In this study accuracy of the ANFIS and ANFIS-PSO models to estimate hydraulic jump characteristics including sequence depth ratio, the jump length, the roller length ratio, and relative energy loss was evaluated in stilling basin versus laboratory results. The mentioned characteristics were measured in the stilling basin with a rectangular cross-section with four different adverse slopes, four diameters of bed roughness, four heights of positive step, three Froude numbers, and four discharges. The average statistical parameters of NRMSE, CRM, and R2 for estimating hydraulic jump characteristics with the ANFIS model were 0.059, -0.001, and 0.989, respectively. While, the mean values of these parameters for the ANFIS-PSO model were 0.185, 0.002, and 0.957, respectively. The results indicated that these models were capable of estimating hydraulic jump parameters with high accuracy. However, the ANFIS model was moderately more accurate than the ANFIS-PSO model to estimate the sequence depth ratio, the jump length, the roller length ratio, and relative energy loss.

V. Habibi Arbatani, M. Akbari, Z. Moghaddam, A.m. Bayat,
Volume 26, Issue 4 (Winiter 2023)
Abstract

In recent years, indirect methods such as remote sensing and data mining have been used to estimate soil salinity. In this research, the electrical conductivity of 94 soil samples from 0 to 100 cm was measured using the Hypercube technique in the Saveh plain. 23 types of input data were used in the form of topographic and spectral categories. Land area parameters such as the Topographic Wetness Index (TWI), Terrain Classification Index (TCI), Stream Power Index (STP), Digital Elevation Model (DEM), and Length of Slope (LS) were considered as topographic inputs using Arc-GIS and SAGA software. Also, salinity spatial and vegetation indices were extracted from Landsat 8 images and were considered spectral inputs. The GMDH neural network was used to model salinity with a ratio of 70% for training and 30% for validation. The results showed that the soil salinity values were between 0.1 and 18 with mean and standard deviation of 5 and 4.7 dS/m, respectively. Also, the results of modeling indicated that the statistical parameters R2, MBE, and NRMSE in the training step were 0.80, 0.06, and 42.1%, respectively. The same values in the validation step were 0.79, 0.13, and 48.7%, respectively. Therefore, the application of spectral, topographic, and GMDH neural network indices for modeling soil salinity is effective.

A.r. Vaezi, S. Rezaeipour, M. Babaakbari, F. Azarifam,
Volume 27, Issue 3 (Fall 2023)
Abstract

Improving soil physical properties and increasing water retention in the soil are management strategies in soil and water conservation and enhancing crop yield in rainfed lands. This study was conducted to investigate the role of tillage direction and wheat stubble mulch level in improving soil physical properties in rainfed land in Zanjan province. A field experiment was done at two tillage directions: up to the downslope and contour line, and five stubble mulch levels: zero, 25, 50, 75, and 100% of land cover equal to 6 tons per hectare. A total of 30 plots (2 m×5 m) were created. The results indicated that water infiltration and water content were considerably affected by tillage direction, whereas its effect on water holding capacity was not significant. This physical property of the soil was influenced by the inherent properties of the soil, including particle size distribution. The change of up to down tillage direction to the contour line increased soil infiltration to 11% and water content to 6%. The physical soil properties were wholly influenced by mulch consumption. Soil water content increased in mulch treatments along with water holding capacity and infiltration rate. The highest volumetric water content was at 100% mulch level (10.62%) which was 11% more than the control treatment. However, there was no significant difference between 100% and 75% mulch treatment. This revealed that the application of 75% stubble mulch in contouring tillage is a substantial strategy for improving soil physical properties and controlling water loss in rainfed lands of semi-arid regions.

M. Farzamnia, M. Akbari, M. Heidarisoltanabadi,
Volume 27, Issue 4 (Winter 2023)
Abstract

The agricultural sector depends largely upon water and energy resources to fulfill sufficient water for producing adequate food for the rapidly growing world’s population. It requires great effort to improve water and energy productivity for agricultural products to provide consumers’ health as well as environmental protection. In this study, the volume of irrigated water, crop yield, water productivity, and the consumed energy for onion crops irrigated with sprinkler or surface irrigation methods under farmer management were measured and compared. The measurements were recorded from 2020 to 2021, on 17 farms across Esfahan Province where onion was a main crop in the region. The measured data from the foregoing two irrigation methods were statistically analyzed using t-test and Pearson correlation coefficients. The outcomes revealed that the volume of irrigated water as well as crop yield was greater for surface irrigation method compared to sprinkler irrigation, and the differences were statistically significant. Moreover, water productivity for onions irrigated with a sprinkler irrigation system was significantly higher (p<0.01) in comparison with onions irrigated with the surface method. In addition, the results indicated a significantly direct correlation between the volume of irrigated water and onion yield, whereas a significantly indirect correlation was observed between the volume of irrigated water and water productivity. A significantly inverse correlation was found between the productivity of energy for irrigation and energy consumption; so, an increase in the energy for irrigation resulted in a decrease in energy productivity. Based on the results of this study, the sprinkler method is more effective than the surface for irrigation of onion.

B. Akbari, H. Khademi,
Volume 27, Issue 4 (Winter 2023)
Abstract

Street dust enters the urban environments due to the resuspension of particles smaller than 100 micrometers. The magnetic properties of street dust and their relationship with the concentration of heavy metals have received less attention from researchers worldwide, and not much study has been performed on this issue in Iran. The objectives of this study were: (i) to investigate the spatial and seasonal changes in street dust, and (ii) to determine their relationships with the concentration of selected heavy metals in several cities in the Isfahan province. Sampling was carried out in the first half of the second month of each season including 20 samples from Isfahan city and 10 samples from Natanz, Shahreza, Falavarjan, Khomeinishahr, and Najafabad. The concentration of selected heavy metals was measured using an atomic absorption spectrometer. Also, the magnetic susceptibility values of the samples at low and high frequencies were determined and frequency-dependent magnetic susceptibility was calculated. The results showed that the presence of ferromagnesian minerals in the parent materials could be the reason for the high values of magnetic receptivity in Natanz City. However, the high level of this characteristic in the street dust of other cities could be due to human activities, especially in Isfahan city. Based on the results of principal component analysis, the high correlation of the first component with magnetic susceptibility and the concentration of zinc, copper, and chromium elements most likely indicates the absorption of these elements by particles close to superparamagnetic (SP). The high correlation of the second component with frequency-dependent magnetic susceptibility and concentration of nickel and cobalt is most likely related to the adsorption of magnetic elements and heavy metals into coarse polyhedral particles that remained on the street floor after the re-deposition of street dust particles. Also, the high correlations between magnetic parameters and the concentration of copper and zinc confirm their anthropogenic origin. On the other hand, low or negative correlations of Pb, Ni, Cr, and Co concentrations with magnetic susceptibility might confirm their natural or non-anthropogenic origin. The higher values of magnetic parameters of street dust in the spring season reflect the significant contribution of magnetic minerals in this season, compared to autumn and winter, and indicate the higher influence of human activities.


Page 2 from 2     

© 2024 CC BY-NC 4.0 | JWSS - Isfahan University of Technology

Designed & Developed by : Yektaweb