Search published articles


Showing 425 results for Oil

M. Naderi Khorasgani, T. Azarbeig, J. Mohammadi,
Volume 27, Issue 3 (12-2023)
Abstract

Soil pollution by heavy metals is a significant issue that threatens human health directly and indirectly. The objectives of this research were to map the extension of some heavy metals in soils of a part of Sirjan Plain, Kerman province, to study the role of natural agents on the distribution of heavy metals, and to assess the risk of soil heavy metal concentration for human health. 120 surficial (0-15 cm) compound soil samples were collected during fieldwork. Soil characteristics like soil texture components, pH, electrical conductivity, organic matter, and total soil heavy metal (Fe, Cu, Zn, Cd, and Pb) concentrations were measured using standard protocols. The mapping of soil texture components and heavy metals was done by the usual Kriging method. Results indicated significant correlation coefficients between soil texture components (silt and clay) and total soil Fe and Cu concentrations. Dominant wind direction and spatial distribution of Fe, Cu, and Zn strongly induced the possible dust-born origin of such elements. Results revealed that the sources of Fe, Cu, and Zn were different from those of Cd and Pb. Maximum soil Fe, Cu, and Zn concentrations were in the southern part of the study area, increasing in an upwind direction while for Cd and Pb, maximum soil concentrations were in the northern part of the study area. The Nemerow integrated pollution index revealed that soils were clean for Cd, lowly polluted for Fe, Pb, and Cu, and moderately polluted for Zn.

S. Jalinousi, E. Joudaki, A. Moghadassi, M. Mahdieh,
Volume 27, Issue 4 (12-2023)
Abstract

This research presents the application of phytoremediation to remove ammonia from effluent possessing high ammonium content and alkalinity in one of the most complex refineries in Iran. The objective of this research was to find new methods to protect and preserve water resources. At first, the algae distribution was investigated. After purifying the samples, Chlorella Vulgaris was selected as resistant algae in the areas that experienced ammonia shocks. A 10-liter container and an airlift photobioreactor with similar laboratory conditions were developed to control biomass production. Experiments were conducted over 20 days and maximum biomass production occurred in the first 16-17 days. Cell density was expressed as dry cell weight in ammonia concentration from 10 mg/L to 500 mg/L. It was also observed that when the Nitrogen content of the culture medium was less than 50 mg/L, ammonia was completely removed in both methods. At a concentration of 10 mg/L, total ammonia in both methods was removed in the first week. At 50 mg/L to 100 mg/L concentrations, about 94% of ammonia was removed in the glass container and about 95% in the bioreactor. In these concentrations, with high ammonia content, the final cell density, and absorption power were significantly low and this was evident at 500 mg/L. Prevention of water evaporation and biomass settling, better control of some vital parameters including pH, temperature, light, and energy intensity, effective mass and heat transfer, and carbon dioxide concentration led to better efficiency of the airlift photobioreactor. A noteworthy point in this result was the extraordinary performance of Chlorella Vulgaris in removing toxic pollutants such as ammonia and possibly using it in the biological systems of sanitary, refineries, and petrochemicals.

S. Ghasemi Pirbaloti, S. Soodaee Moshaee,
Volume 28, Issue 1 (5-2024)
Abstract

Since the long-term sustainability of garden ecosystems is dependent on maintaining the soil quality, knowing the condition of the soils and investigating the effects of the activities on the soil properties is very important and effective in ecosystem management. To investigate the soil quality index of almond (Prunus dulcis) orchards under different managed methods in ChaharMahal va Bakhtiari province, soil samples were collected from three points in each orchard and finally classified into 6 groups (Saman, Ben, Shahrekord, Kiar, Ardel, and Farsan). To determine the soil quality index, soil characteristics including pH, EC, total and water-soluble organic carbon, basal and substrate-derived respiration, rhizosphere microbial population, and available soil P and K were analyzed. The results showed that almond orchard management in different regions affected the soil characteristics and the processes evaluated in this study. The monitoring of soil properties showed that pH 7.05 - 8.48, EC 0.23 - 2.91 dS/m, microbial respiration 0.44 - 8.57 mg CO2.100 g-1.day-1, organic carbon 2.09 - 44.79 g/kg, available phosphorus 1.5 - 122.3 mg/kg, and available potassium were between 91.2 - 3038 mg/kg. Soil quality index components including chemical components, microbial activity, microbial population, and soil organic carbon were determined. The contribution of soil salinity to soil quality obtained using factorial analysis was the highest (31%), followed by microbial carbon mineralization coefficient (27%), rhizosphere microbial population (24%), and water-soluble organic carbon (18%). The soil quality index values for Saman, Ben, Shahrekord, Kiar, Ardal, and Farsan almond orchards were 0.46, 0.40, 0.51, 0.67, 0.54, and 0.37, respectively. These values showed that the evaluated soils are suitable for almond production in Shahrekord, Kiar, and Ardal, and for Saman, Ben, and Farsan, there is a need for serious management measures to improve soil quality and increase the sustainability of these agricultural ecosystems.

F. Gholamzadeh, H. Asgarzadeh, H. Khodaverdiloo, M.r. Mosaddeghi,
Volume 28, Issue 1 (5-2024)
Abstract

This study was conducted in the summer of 2021 to evaluate and validate the gravimetric soil water content measurements using a field oven. Ten soil types with a salinity of saturated paste (ECe) less than 4 dS m-1 and three saline soils were studied around Urmia Lake. Plots with dimensions of 1 m × 2 m were prepared for the selected soils to measure gravimetric soil water content and soil physical and chemical properties. The gravimetric water content (θm) values measured using the field oven (i.e., θmFO), were compared with those measured by a standard lab oven (i.e., θmLO). The soil water content values measured in the lab, regarded as a benchmark, were measured at 105 °C for 24 h. Temperatures of 120, 140, and 160 °C with three durations of 10, 15, and 20 min were used to dry the soil samples in the field oven. There was very good compatibility between the values of θmFO and θmLO when the soil samples were dried in the field oven for 15 or 20 min at all three temperatures. Significant linear relations were obtained between the θmFO and θmLO values as the slopes of linear relations were close to 1, the intercepts of relations were negligible and the distributions of measured data around the line 1 to 1 were unbiased. The minimal effects of soil organic matter content, clay content, salinity, and bulk density on water content measurements by the field oven indicate an important advantage of this method. These results confirm the high efficiency of the field oven for fast and reliable measurements of water content in different soils.

E. Karamian, M. Navabian, M.h. Biglouei, M. Rabiei,
Volume 28, Issue 1 (5-2024)
Abstract

Cultivation of rapeseed as the second crop requires drainage systems in most of the paddy fields of the Guilan province. Mole drainage, as a low-cost and shallow drainage method that is suitable for rice cultivation conditions and easier to implement than pipe drainage, can be a solution in the development of second-crop cultivation. The present study was conducted to evaluate the drainage of mole drainage and nitrogen fertilizer management on the quantity and quality of drainage at Guilan University. In this regard, an experiment was conducted under two treatments including drainage and nitrogen fertilizer (i.e. traditional mole drainage and sand-filled mole drainage), and 180 and 240 kg of nitrogen fertilizer per hectare in three replications. After each rainfall during the plant growth period, water samples were taken from the drains, and parameters of electrical conductivity, pH, total suspended solids, total phosphorus, turbidity, concentrations of ammonium, chloride, nitrite, nitrate, and phosphate were measured. Also, the outflow from the drains and the water table level were measured by piezometers during the rain and after that. The results of the mean comparison of pH and total suspended solids showed that most of them were obtained with 7.49 and 281.25 mg/liter, respectively, in the mole drain filled with sand and the traditional mole drainage and 180 fertilizer treatment. The highest mean of electrical conductivity and turbidity was observed as 651 micro mohs/cm in the traditional mole drainage and 240 fertilizer treatment and with 67.76 NTU in the traditional mole drainage and 180 fertilizer treatment. The statistical analysis showed that the effect of drainage treatment on the amounts of ammonium, nitrite, nitrate, phosphate, and total phosphorus was not significant. The outflow from the traditional mole drainage was 49% lower than the sand-filled mole drainage. The traditional and sand-filled mole drains were able to drain excess water with average reaction coefficients of 0.8 and 0.83 per day during the growth period, respectively. Considering the speed of water discharge, drain discharge, and the main non-significance of qualitative parameters among drainage treatments, mole drainage filled with sand is recommended for the development of rapeseed cultivation in paddy fields.


Page 22 from 22    
...
22
Next
Last
 

© 2024 CC BY-NC 4.0 | JWSS - Isfahan University of Technology

Designed & Developed by : Yektaweb