Search published articles


Showing 347 results for Soi

M. Mansourzadeh, F. Raiesi,
Volume 16, Issue 59 (4-2012)
Abstract

The application of herbicides as organic chemical compounds to control pest and weeds may affect the population and activity of microorganisms, and this may have an influence on biochemical processes that are important for soil fertility and plant growth. The primary objective of this study was to evaluate different loading rates of eradican (EPTC) on soil microbial biomass C and N, microbial biomass C/N ratio and the activities of urease and arylsulphatase under field conditions. In this experiment, loading rates of 6 and 9 L ha-1 eradican were applied to a calcareous soil cultivated with corn (Zea mays L.) and left uncultivated using split-plots arranged in a completely randomized block design with three replications. The experiment was conducted in the Kabootarabad’s Agricultural Research Center, Isfahan. Soil microbial biomass C and N were determined at 30th and 90th days after the onset of experiment and the activities of urease and arylsulphatase were assayed at 30th, 60th and 90th days. Results showed that in soils cultivated with corn microbial biomass C increased with increasing eradican levels and in both cultivated and uncultivated soils microbial biomass N and microbial biomass C/N ratios were increased over the control. At 30th day, urease activity at 6 L ha-1 level reduced, while at 9 L ha-1 level it increased compared with the control soils. At 60 day, there was no significant difference in the urease activity between the treatments. At 90th day, the activity of urease showed slight fluctuations. There was a reduction in arylsulphatase activity of the cultivated soils by increasing the loading rates of eradican during the experiment, and in uncultivated soils no trend was observed. Briefly, the use of eradican can cause either reduced or increased microbial biomass sizes and enzyme activities in calcareous soils These changes, however, depend largely upon the application rate of eradican, time elapsed since eradican application (i.e., sampling date) and the presence or absence of plant
H. Emami, M. Shorafa, M. R. Neyshabouri,
Volume 16, Issue 59 (4-2012)
Abstract

Direct measurement of soil unsaturated hydraulic conductivity (K(h) or K(θ)) is difficult and time-consuming, and often in many applied models, predicting hydraulic conductivity is carried out according to measurements of soil retention curve and saturated hydraulic conductivity (Ks). However, using KS as a matching point in many procedures may result in over-estimation of unsaturated hydraulic conductivity in dry regions. Therefore, the unsaturated hydraulic conductivity at inflection point of retention curve (Ki) and Ks was used as a matching point to predict K(h). For measurement of K(h), 30 soil samples were collected based on variety of soil texture (8 texture classes from sandy to clay) and other chemical and physical properties. In addition to Ks, K(θ) values of undisturbed samples were measured using multi-step outflow method at matric suctions of 0.1, 0.2, 0.3, 0.5 0.7, 1 bar and inflection point of retention curve by using hanging water column and pressure plate. Then, the measured K(h), and water diffusivity (D(θ)) values were compared to the predicted values of van Genuchten and Brooks and Corey models (with Mualem and Burdine constraint). The results showed that for 80% of the samples, the van Genuchten–Mualem model with Ki was the best model for predicting K(h) (i.e. using Ki as a matching point in the van Genuchten–Mualem model resulted in best fitting to measured data). Also, in 6.7 % of samples (two sandy clay samples), Brooks and Corey-Mualem model with Ki and in 13.3 % soil samples (2 silty clay and 2 silty clay loam samples), van Genouchten–Mualem model had a best fitting to K(h) measured data. Furthermore, in 20 % samples (4 clay loam, and 2 silt loam textures), the accuracy and efficiency of van Genuchten–Mualem with Ki and van Genuchten–Mualem models in predicting K(h) were almost similar. According to t-Student test, the mean of RMSE and GSDER of van Genuchten–Mualem model with Ki was significantly less than van Genuchten–Mualem model at P < 0.01. In 90 percent of samples, van Genuchten-Mualem and Brooks and Corey-Burdine theory had the best fitting to the measured data of water diffusivity, but in some cases van Genuchten-Burdine model with Ki was the best model for predicting D(θ).
M. Riahi , F. Raiesi,
Volume 16, Issue 59 (4-2012)
Abstract

Mountainous landscapes in Central Zagros are mainly used as grazing rangelands to feed animals and are heavily degraded. Overgrazing may impose a negative effect on rangeland productivity and sustainability through significant changes in soil properties. Soil nitrogen (N) mineralization is one of the key biological processes that might be affected by biotic and abiotic factors including range grazing regime or intensity. The primary objective of this study was to assess the effects of rangeland management (grazing and ungrazing regimes) on soil N mineralization in natural rangelands of Chaharmahal VA Bakhtiyari province. Three range management regimes including a) long-term ungrazed, b) controlled grazed and c) freely- (over)-grazed plots in a close vicinity were selected in three regions consisting of SabzKouh (protected from grazing for 18 years), Boroujen (protected from grazing for 23 years) and Sheida (protected from grazing for 2 years), and soil samples were collected from 0-15 cm depth for some physical and chemical properties. Soil N mineralization was measured under standard laboratory conditions. At SabzKouh, the effect of range management on the cumulative N mineralization and the proportion of N mineralized (%) was significant (P<0.05) and ungrazing regime resulted in 89% and 96% increases in soil N mineralization in ungrazed rangelands compared with controlled grazed and freely- grazed rangelands, respectively. Similarly, soil N mineralization was significantly greater (P<0.05) in ungrazed rangelands (3.3- to 3.5-folds) than in controlled grazed and freely-grazed rangelands at Boroujen site. However, at Sheida site with short-term ungrazing period and cropping history there were no significant and considerable differences in soil N mineralization among the three grazing regimes. Briefly, degraded rangelands at SabzKouh and Boroujen sites seem to recover rather quickly from long-term overgrazing with a proper grazing management, while rangeland ecosystems at Sheida site need a much longer period for steady-state conditions and for improvements in soil quality and fertility after long-term soil degradation and disturbance.
A. Farshadirad, E. Dordipour, F. Khormali1 ,
Volume 16, Issue 59 (4-2012)
Abstract

Non-exchangeable potassium (NEK) release is necessary to supply potassium for plant in different soils. A few studies on the NEK release have been done in soils and particularly on its components. This study was intended to investigate the NEK release from soil and the components of clay and silt through successive extractions with oxalic acid (0.01 M) over a period of 1844 (h) in 4 soil series of Golestan province. The amount of NEK release from whole soil, silt and clay fractions after 1844 (h) were 242 to 450, 380 to 550 and 105 to 199 mg kg-1, respectively. The cumulative rates of NEK release after 1844 (h) were well described by simplified Ellovich, parabolic diffusion and power function equations. The rate of K release was high initially, and then decreased gradually in all soils and in their silt and clay fractions. The amount of released NEK (with high rate) consisted of lower percentage of total NEK, but in spite of less amount, this K form plays a vital role in K dynamic and soil fertility.
M. Pirzadeh, M. Afyuni, A. H. Khoshgoftarmanesh,
Volume 16, Issue 60 (7-2012)
Abstract

This study was carried out to investigate zinc (Zn) and cadmium (Cd) concentration in paddy soil and rice grain produced in central and southwest Iran in relation to soil and plant factors, and their intake in peoples diet was also assessed. Rice crops and associated surface soils (0-30 cm) were collected from 136 fields in Isfahan, Fars and Khuzestan provinces. The result, showed the DTPA-Zn concentration in more than 50% of paddy soils was less than its critical deficiency concentration (2 mg kg-1). The grain Zn concentration in more than 54% of the rice samples was less than 20 mg kg-1. The measured Cd concentrations in paddy soils and edible part of rice exceeded the world health organization (WHO) value in more than 12% of the samples. By considering the average daily rice consumption of 110 g per capita, the Zn intake from rice consumption was estimated about 10% needed for female and male adult. Diet intake analysis did not indicate any excessive dietary intake of Cd when Cd mean of concentrations in rice grain was 0.04 mg/kg, but based on the results of risk analysis, it is more than safely level for contaminated rice.
R. Rezae Arshad, Gh. Sayyad, *, M. Mazloom, M. Shorafa, A. Jafarnejady,
Volume 16, Issue 60 (7-2012)
Abstract

Direct measurement of soil hydraulic characteristics is costly and time-consuming. Also, the method is partly unreliable due to soil heterogeneity and laboratory errors. Instead, soil hydraulic characteristics can be predicted using readily available data such as soil texture and bulk density using pedotransfer functions (PTFs). Artificial neural networks (ANNs) and statistical regression are two methods which are used to develop PTFs. In this study, the multi-layer perceptron (MLP) neural network and backward and stepwise regression models were used to estimate saturated hydraulic conductivity using some soil characteristics including the percentage of particle size distribution, porosity, and bulk density. Data of 125 soil profiles were collected from the reports of basic soil science and land reclamation studies conducted by Khuzestan Water and Power Organization. The results showed that MLP neural network having Bayesian training algorithm with the greater coefficient of determination (R2=0.65) and the lower error (RMSE =0.04) had better performance than multiple linear regression model in predicting saturated hydraulic conductivity.
J. Asghari Meidani, E. Karimi, S. B. Mousavi,
Volume 16, Issue 60 (7-2012)
Abstract

This study was conducted to study and compare the effects of different tillage systems on soil physical properties and wheat yield in dryland conditions. The experiment was carried out in Maragheh Dryland Research Station with 5 treatments and 4 replications based on RCBD for 3 years (2001-2003). The results showed that difference between the treatments in terms of wheat yield was significant, and stubble chopping and chisel plow tillage in fall + sweep in spring + seed drill planting had the maximum yield (i.e. 1452 kg/ha), lower value for yield (1.077kg/ha) blonged to T1 treatment. Also the results showed that spike/plant and spike length were the main characters in yield increase. For the soil bulk density and water content, the difference between treatments was significant and in planting and flowering stages stubble chopping and chisel plow in fall + sweep in spring + planting by seed drill had the highest soil water content and the lowest bulk density
M. Khatar, M. R. Mosaddeghi, A. A. Mahboubi,
Volume 16, Issue 60 (7-2012)
Abstract

This study was conducted to investigate the effect of water salinity and sodicity on pore size distribution and plant-available water of two clay and sandy clay loam calcareous soils. All combinations of water EC values of 0.5, 2, 4 and 8 dS m-1 and SAR values of 1, 5, 13 and 18 (in total 16 solutions) were used to wet and dry the soil samples for five cycles. Then, water retention of the soil cores was measured at matric suctions of 0 (θs), 10 (θ10) 100 or 300 cm (θFC) and 15000 cm (θPWP). The following quantities were calculated: the difference between θ100 or θ300 and θ15000 considered as available water contrent, the θs and θ10 as macrorosity, the θ10 and θ100 as mesoporosity, and the θ100 as microrosity. The initial porosity of both soils was similar, but the greater values of pore indices and θFC, θPWP and AWC were measured in the clay soil due to clay swelling. As water EC increased, mesopores were destructed and altered to macropores and micropores. Salinity altered the mesopores into macropores due to contraction of diffuse double layer and particle’s flocculation and consequently decreased the θFC, and created new micropores which were responsible for the higher value of θPWP. These trends ultimately diminished the AWC. As water SAR increased, mesopores were destructed and altered to micropores but it did not significantly affect the macropores. With increment of SAR, both θFC and θPWP increased due to structural distruption clay swelling and dispersion resulting in increased adsorptive and interlayer surfaces. The increasing effect of SAR on θPWP was greater and more distinct so that AWC was reduced. As a result, high values of SAR of irrigation water decreased the soil available water to plants besides its toxicity and hazardous effect on plants. With increment of irrigation water salinity, the destructive impacts of SAR diminished. The influence of water quality on water retention was pronounced for the clay soil.‎
H. Dehghan-Menshadi, M. A. Bahmanyar, S. Salek Gilani, A. Lakzian,
Volume 16, Issue 60 (7-2012)
Abstract

Biological indicators are considered soil quality elements, due to their dependence on soil organisms. In order to investigate The effect of compost and vermicompost enriched by chemical fertilizers and manure on soil organic carbon, microbial respiration, and enzymes activity in basil plant's rhizosphere, a field experiment was conducted as a split-plot design with randomized complete blocks and three replications in 2006. The main plot involved six levels of fertilizer including: 20 and 40 tons of compost enriched, 20 and 40 tons of vermicompost enriched per hectare, chemical fertilizer and control without fertilizer and sub-plot, and period of application (two, three and four years). The results showed that application of compost and vermicompost at all levels increased soil organic carbon (OC) and soil microbial respiration, microbial biomass and urease activity compared to the controls (p<0.05), but increasing trend among the treatments was not similar. The maximum amounts of OC, soil microbial respiration and enzyme activity were observed in 40 tons of vermicompost enriched with chemical fertilizer ha-1 with four years of application. In high levels of compost application, the urease activity was decreased.
Y. Kooch, S. M. Hosseini, J. Mohammadi, S. M. Hojjati,
Volume 16, Issue 60 (7-2012)
Abstract

To investigate spatial variability of soil characteristics in the most valuble forest stands in the northern Iran using geostatistical approach, a twenty hectare area in Experimental Forest Station of Tarbiat Modares University was considered. Soil samples were taken from pits, mounds, canopy gaps, under single trees and closed canopy positions at 0 - 15, 15 - 30 and 30 - 45 cm depths using core soil sampler (81cm2 cross section). pH and organic matter were measured in the laboratory, and then carbons to nitrogen ratio and carbon sequestration were calculated. Spatial variability for soil characteristics revealed anisotropic variogram due to the same variability of surface variogram in different depths. pH in all the depths and carbon sequestration in 30 - 45cm depth showed exponential model whereas the other soil characteristics resulted in a linear model in different layers. The results of spatial structure showed pH with medium structure in all the depths, organic matter and carbon to nitrogen ratio with pure nugget effect (non structure), carbon sequestration in 0 - 30cm depth with weak structure and 30 - 45cm depth with medium spatial structure.
M. Bagheri Bodaghabadi, M. H. Saleh, I. Esfandiarpoor Borujeni, J. Mohammadi, A. Karimi Karouyeh, N. Toomanian,
Volume 16, Issue 61 (10-2012)
Abstract

Discrete Models of Spatial Variability (DMSV) have limitations for soil identification in traditional soil maps. New approaches, generally called digital soil mapping (DSM), using continuous methods (CMSV), try to predict soil classes or soil properties based on easily-available environmental variables. The objective of this study was to map the soil classes of the Borujen area, Chaharmahal-va-Bakhtiari province, using digital elevation model (DEM) and its attributes and Soil-Land Inference Model (SoLIM). To do this, eighteen terrain attributes were derived from the DEM of the area. The primary analysis showed seven attributes are the most important derivatives. These derivatives as well as three dominant soil subgroups and seven soil families of the region (41 profiles from 125 profiles) were used to construct the input data matrix of the model. Then, output fuzzy soil maps of SoLIM were converted to polygonal soil map, using ArcGIS. Results showed that different combinations of DEM attributes have different accuracy rates for soil prediction. The accuracy of the interpolation was twice that of the extrapolation. Although SoLIM had an acceptable accuracy for soil nomination, and identification of soil map units’ types, it did not have enough accuracy for the location of soil classes. It seems that using other data like parent material and geomorphic surface maps will increase the accuracy of the model prediction.
E. Farahani, M.r. Mosaddeghi, A.a. Mahboubi,
Volume 16, Issue 61 (10-2012)
Abstract

Hardsetting phenomenon is an indicator of poor soil physical quality. Hardsetting soils are soils with high rate of mechanical strength increase upon drying and are hardened and/or compacted when dry out. It is difficult to till such soils. Hardsetting soils have additional limitations such as poor aeration at wet conditions, low infiltrability and high runoff and erosion. Most of Iran soils have low organic matter content and it is expected that hardsetting phenomenon occurs in some of these soils. This study was conducted to investigate the hardsetting phenomenon on 9 soil series collected from Hamadan province. Three types of mechanical strength consisting tensile strength (ITS), unconfined compressive strength (UCS), and penetration resistance (PR) were measured on the repacked soil samples prepared in the lab. The ITS, UCS and PR tests were done on the soil cores which had been prepared at bulk density (BD) equal to 90% of critical BD for root growth (0.9BDcritical). The effects of intrinsic properties on the hardsetting phenomenon were studied, too. Based on the suggested definition in “International Symposium on Sealing, Crusting and Hardsetting Soils” to International :::union::: of Soil Science, in which a hardsetting soil has air-dry tensile strength ≥ 90 kPa, one soil (medium-textured) out of the studied soils showed the hardsetting phenomenon at 0.9BDcritical. It might be concluded that medium-textured soils are more susceptible to hardsetting. For all of the studied soils, the ITS increased with the increase in clay content. The increasing impacts of clay and carbonate contents were also observed for the UCS and PR, respectively. Calcium carbonate could act as a cementing agent in between the soil particles and brings about the soil susceptibility to hardsetting. Moreover, the decreasing trend of all soil mechanical strengths was observed with water content increase. Slope (b) of the exponential model (fitted to the soil mechanical strength characteristic curve), as an index of hardsetting, had positive correlation with the sand content and negative correlation with the silt content. Overall, texture and calcium carbonate content are major and effective properties in terms of hardsetting phenomenon in Hamadan soils.
S. Ezzati , A. Najafi,
Volume 16, Issue 61 (10-2012)
Abstract

Increase in soil bulk density and reduces in porosity and infiltration rate are the most common disturbances during timber harvesting and ground-base skidding. The present study was conducted to study soil physical properties e.g., soil bulk density, moisture, porosity and soil hydrological properties e.g., soil infiltration from ground-base skidding in twenty years since logging. After initial survey, four abandonment skid trails were selected with similar pedologic, climatic conditions and physiographic and different age in Necka-Zalemrod catchment in east of Mazandaran province. Results indicated that impacts of machinery traffices in high traffic intensity have remained yet 20 years since logging. Means soil bulk density, porosity and void ratio were 42.4 greater, 24.6 and 46.7 percent, respectively, lower than the undisturbed areas. The least infiltration rate was recorded in 1-5 years old skid trail, so the reduction of water was not considerable within 18 minutes after experiment into soil in inner ring in this skid trail. Results in each skid trail firmed that in low traffic intensity soil physical and hydrologic properties was tent to “normal” recover in compare to the undisturbed areas.
M. Norouzi, H. Ramezanpour,
Volume 16, Issue 61 (10-2012)
Abstract

Flooding and fire are important phevent which could impact the forests of north of Iran periodically. These phenomena could have undesirable effects on properties and quality of soil. This study was conducted in order to investigative the effects of flooding and fire on some soil properties in Lakan forest, Guilan province. Soil sampling was carried out on three replicates from three depths 0-3, 3-6 and 6-9 cm in flooding, burned and intact regions. Results of this study indicated that clay, silt, pH, electrical conductivity (EC), Na and K values (in all of depths), organic carbon (OC) and N values (in second and third depths) significantly increased and sand content (in all depths) significantly decreased in flooding soils in comparison with intact soils. In burned soils, pH values (in first and second depths), EC, K and P values (in first depth) significantly increased and clay, OC and N values (in first depth) significantly decreased in comparison with intact soils. Soil water retention capacity showed that the flooding and burned soils had maximum and minimum levels soil moisture that can be related to clay and OC changes. Results of WDPT test showed the water repellency in the first depth in burned soils. Generally, flooding and fire phenomena significantly affected physical and chemical properties.
N. Moradi, M. H. Rasouli-Sadaghiani, E. Sepehr, B. Abdolahi,
Volume 16, Issue 62 (3-2013)
Abstract

Organic acids can affect phosphorus (P) sorption. In order to evaluate the effect of citric acid and oxalic acid on phosphorus sorption characteristics in calcareous soils, five different soil samples (0-30 cm) were collected in West Azerbaijan province. Soil samples (2.5 g) were equilibrated with solutions of KH2PO4 containing 0 to 20 mg P l-1. Five mM organic acids were added to each tube and sorbed P was calculated. The sorption data were fitted to Langmuir, Freundlich and linear equations. The results showed phosphorus sorption data were well described by the Freundlich and linear equations. The average values of Kf (distribution coefficient), n and equilibrium buffering capacity (EBC) of linear equation in citric acid treatment were reduced to 29, 12 and 17 percent, respectively and for oxalic acid reduced to 43, 27 and 14 percent, respectively. Maximum sorption was reduced significantly by oxalic as compared to citric acid. Standard phosphorus requirement (SPR) was decreased by 57 % as a result of organic acids additions compared to control condition. It is concluded that organic acids additions to soils containing more calcium carbonate and high amount of clay can decrease P sorption.
N. Parsafar , S. Marofi,
Volume 16, Issue 62 (3-2013)
Abstract

In this research, we estimated soil shallow depths temperatures using regression methods (Linear and Polynomial). The soil temperatures at soil depths (5, 10, 20, 30, 50 and 100 cm) were correlated with meteorological parameters. For this purpose, temperature data of Hamedan station (in the period 1992-2005) were employed. Soil temperature data were measured on a daily basis at 3 PM, 9 PM and 3 AM. MS Excel was used for deriving the regressions between soil temperature and meteorological parameters (air temperature, relative humidity and sunshine hours). The results showed that the highest coefficient of determination (R2) of the linear regression was between soil temperature in 20 cm soil depth and air temperature at 3 AM (R2= 98.15%) and the lowest value in 100 cm soil depth at 3PM (R2= 83.96%). Also, the highest R2 of non-linear regression was observed between soil temperature in 10 cm soil depth and air temperature at 3 AM (R2= 98.45%) and lowest value in 100 cm soil depth at 3PM (R2= 84.11%). The results showed that the highest and lowest values of R2 of linear relations between meteorological parameters (relative humidity and sunshine hours) and soil temperature were observed in 10 cm soil depth (at 3 AM) and in 100 cm soil depth, respectively. Correlations of soil temperature with air temperature were greater than those with the other two parameters. Moreover, R2 values of non- linear relation were higher than linear relation.
M. Moghadas, A. R. Estabragh , J. Abdollahi,
Volume 16, Issue 62 (3-2013)
Abstract

Expansive soils swell and shrink periodically when subjected to seasonal water content changes. As a result, they are a constant source of problem in the design and construction of foundations. In this study, the behaviour of an expansive soil was studied through a number of experiments involving cycles of wetting and drying using three different water qualities. Laboratory tests were performed on statically-compacted samples of an expansive soil in a modified Oedometer under constant surcharge pressure of 10 kPa. Vertical deformation of the soil sample was recorded continuously, and during the test, void ratio and water content of the sample were determined at different stages. The results indicated that the equilibrium condition was reached after about six wetting-drying cycles. It is shown that the swelling potential changes with changes in water quality the saline water reduced the swelling potential of the soil compared to the distilled water during wetting and drying cycles. Furthermore, the results showed that the variations of water content-void ratio paths during wetting-drying were the same (no hysteresis) when the equilibrium condition was achieved
H. R. Moradi, M. Bakhshi Tiregani , S. H. R. Sadeghi,
Volume 16, Issue 62 (3-2013)
Abstract

Climate situation changes over a year cause changes in some soil characteristics and soil sensitivity to erosion. Investigation of these changes and how they impact on erosion can be of particular importance. This study investigated changes in Sediment Productivity and soil factors affecting these changes in Tiregan rangeland located in Daregaz city in Khorasan Razavi province. In this study, using the position of the upper and lower hillside of eastern and western aspects, the sampling with rain simulator was performed. Characteristic features of sediment yield including runoff threshold, runoff volume, sediment and turbidity were measured. Soil samples were taken from each sample rain simulation and features of the initial moisture content, bulk density, electrical conductivity, pH and organic matter were measured. Sample was collected with the same intensity and duration of the instrument with fixed locations, and was repeated in four seasons. In order to obtain the position and orientation of each of the parameters in the data obtained at different seasons, the combined analysis of variance test was used. The effect of each of these parameters and the difference between them were evaluated using the Tukey test, and the graphs in 2007 Excel software were plotted. The results showed that all the parameters of sediment yield during the year have significantly changed. The maximum amount of sediment production rates occurred in autumn and was gradually reduced. Its decreasing in both winter and spring can be attributed to vegetation in the area.
A. R. Vaezi, A. Hoseinshahi, P. Abdinejad,
Volume 16, Issue 62 (3-2013)
Abstract

Flood spreading is one of the suitable methods to control the floods and conservation of soil and water in arid and semi-arid regions. Since soil properties may be influenced by the flood spreading, this study was carried out to investigate the effect of the flood spreading on physicochemical soil properties in Garacharyan plain located in North West of Zanjan in 2009. Three flooded areas and one control area were selected for soil sampling. Two hundred sixteen soil samples and twenty seven soil samples were taken from three flooded areas and control area, respectively. Soil infiltrability was also measured at three points both in the flooded areas and in control area. Results of the physical soil properties indicated that the soil infiltrability and available water content were significantly (p< 0.001) affected by the flood spreading in the study plains. With a decrease in sand percentage and an increase in clay in the flooded areas, soil infiltrability strongly declined. The available water content negatively correlated (p< 0.001) with clay in the areas. Soil chemical properties, including salinity, potassium, and bicarbonate, contrary to pH and total neutralizing carbonates and nitrogen, significantly (p< 0.001) increased in the flooded areas as compared with control area. Increasing of the salinity in the flood plains is associated with potassium in the flood plains (p< 0.001). There was no significant difference in organic matter and carbonate contents between the flooded areas and control area. The study revealed that controlling suspended load and solvent solids in the floods is necessary to prevent the degradation of the soil physicochemical properties (porosity, infiltration, plant water supply, and salinity and bicarbonate) and as a result improve the effectiveness of the flood spreading method in the flooded areas.
A. Jafari, H. Khademi, Sh. Ayoubi,
Volume 16, Issue 62 (3-2013)
Abstract

Digital soil mapping includes soils, spatial prediction and their properties based on the relationship with covariates. This study was designed for digital soil mapping using binary logistic regression and boosted regression tree in Zarand region of Kerman. A stratified sampling scheme was adopted for the 90,000 ha area based on which, 123 soil profiles were described. In both approaches, the occurrence of relevant diagnostic horizons was first mapped, and subsequently, various maps were combined for a pixel-wise classification by combining the presence or absence of diagnostic horizons. Covariates included a geomorphology map, terrain attributes and remote sensing indices. Among the predictors, geomorphology map was identified as an important tool for digital soil mapping approaches as it helped increase the prediction accuracy. After geomorphic surfaces, the terrain attributes were identified as the most effective auxiliary parameters in predicting the diagnostic horizons. The methods predicted high probability of salic horizon in playa landform, gypsic horizon in gypsiferous hills and calcic horizon in alluvial fans. Both models predicted Calcigypsids with very low reliability and accuracy, while prediction of Haplosalids and Haplogypsids was carried out with high accuracy.

Page 7 from 18     

© 2024 CC BY-NC 4.0 | JWSS - Isfahan University of Technology

Designed & Developed by : Yektaweb