Search published articles


Showing 347 results for Soi

N. Parsafar, S. Marofi ,
Volume 17, Issue 66 (2-2014)
Abstract

In this study, a completely randomized experiment was designed with five irrigation treatments and three replicates. The irrigation programs were raw wastewater (T1), treated wastewater (T2), a combination of 50% raw wastewater and 50% fresh water (T3), a combination of 50% treated wastewater and 50% fresh water (T4), and fresh water (T5). The experiments were run within a greenhouse. The lysimeters were built up in September 2009 and they were filled with a two layer soil. The upper (30 cm) and lower (40 cm) layers were sandy loam and sandy clay loam, respectively. The results showed that the effects of watering treatments on transfer coefficients of heavy metals from soil to shoots (except Cd) and tubers of potato (except Zn and Cu) were significant (p <0.01). Maximum and minimum transfer coefficients of heavy metals were observed in the (T1) and (T5) treatments, respectively. Also, the transfer coefficients of Cd from soil to shoots were lower than tubers. In the case of Zn, Cu and Pb, transfer coefficients from soil to tubers were lower than shoots. In this study, the maximum transfer coefficients to shoots were Cd (0.331-0.463), Zn (0.383-0.230), Cu (0.173-0.386) and Pb (0.003-0.057), respectively. Maximum transfer coefficients toward tubers (except T5) were Cd (0.439-0.572), Cu (0.081-0.138), Zn (0.170-0.217) and Pb (0-0.017), respectively. The combination of wastewater and fresh water use in short-term irrigation might be feasible, but a heavy metal monitoring program is necessary.
M. Nouri, M. Homaee, M. Bybordi,
Volume 17, Issue 66 (2-2014)
Abstract

In order to assess hydraulics of LNAPLs in soil, the soil retention curves of petroleum and water were both determined through hanging column method. And, the hydraulic conductivity of petroleum and water were determined by steady head method. The water and petroleum hydraulic conductivities were 7.27 and 57.84 cm.day-1, respectively. The soil retention parameters were obtained based on van Genuchten, Brooks-Corey and Campbell models. In addition, the soil hydraulic conductivity for both fluids was predicted based on Mualem- Brooks-Corey, Burdine- Brooks-Corey, Mualem-van Genuchten and Campbell models. The accuracy assessment of models was performed by ME, RMSE, CD, EF and CRM. The results indicated that the magnitudes of the pore-size distribution parameters and the bubbling pressure parameters were reduced in NAPL-air system compared to water-air system. Due to unusual hydraulic behavior of petroleum and soil-petroleum interactions leading to remaining substantial petroleum content in porous media, more matric potential is needed to drain out petroleum from soils compared to water. Thus, soil provides more retention for petroleum at a given quantity of fluid. Owing to high amount of petroleum kinematic viscosity, the saturated soil hydraulic conductivity of petroleum was lower than that of water. However, soil hydraulic conductivity for petroleum was larger than water at more than 100 cm matric head.
M. Alizadeh, F. Mirzaii, T. Sohrabi , M. Kkavosi , M. R Yazdani,
Volume 17, Issue 66 (2-2014)
Abstract

Water management in cracked paddy soils is an important issue in rice cultivation. In order to study organic matter and zeolite effect and their interaction on moisture conditions and hydraulic and physical properties of paddy soils, the organic matter (rice straw) at four levels (0, 8, 16 and 24 tons per hectare), zeolite at four levels (0, 0.5, 1 and 1.5 percent ), and also moisture stages of soil at 5 levels were selected. This experiment was conducted in Rice Research Institute of Iran. Randomized Complete Block Design (RCBD) was used to study the effect of treatments on different subjects. The amount of moisture, bulk density and the distance of soil from the wall of container were measured in a 4-month period. The obtained results showed that the interaction effects of organic matter and zeolite on soil moisture content were statistically significant at one percentage level. Addition of plant residues caused an increase in soil moisture weight and reduction in bulk density compared to the control treatment. It was also found that soil moisture content and bulk density were highly correlated. Bulk density of control treatment ranged from 0.75 to1.7 gr/cm3, while with addition of 1.5 % crop residue the bulk density ranged from 0.7 to 1.3gr/cm3. Overall results show that crop residues are effective in reduction of crack parameters of soil , but zeolite cannot be effective although it causes more maintenance of soil moisture.
A. Heidari, A. Hemmat, S.m Rezvani,
Volume 18, Issue 67 (6-2014)
Abstract

efficiency was investigated during a 2-year period (2009-2010) in a silty clay loam soil in Tajarak Research Station (Kaboudarahang Township), Hamedan. The experimental design was a strip-plot within a randomized complete blocks design. The horizontal band, the irrigation water rate after flowering, included full and deficit irrigation (100% and 75% potato water requirement) and the vertical band, kind of inter-planting row tillage including 1- subsoiling to 30-35 cm soil depth, 2- chiseling to 20-25 cm soil depth, 3- sweeping to 5 cm soil depth and 4- no-till. During the growing season, soil mechanical resistance (cone index) in two stages and water infiltration into the soil were measured. At the end of the growth season (harvesting time), potato yield quantity and quality were measured. Result showed that the effect of inter-row tillage on soil mechanical resistance was significant. Subsoiling and chiseling had lower soil mechanical resistance and higher water permeability between treatments, respectively. The effect of inter-row tillage on potato yield was significant so subsoiling and chiseling had a higher potato yield between treatments, respectively. The effect of irrigation water rate on potato yield was not significant. The effect of inter-row tillage on water use efficiency wasn’t significant.
H. Khodaverdiloo, N. Hosseini Arablu,
Volume 18, Issue 67 (6-2014)
Abstract

Cation exchange capacity (CEC) is one of the important indices in soil fertility. Direct measurement of CEC is time consuming and expensive, especially in aridisols containing high amounts of carbonates and gypsum. Alternatively, CEC could be indirectly predicted through pedotransfer functions (PTF). The objective of this study was to predict CEC using class and continuous PTFs.A data set (n = 977) was classified according to the soil textural class and was used to derive the PTFs. Another independent set (n = 173) was used to test the reliability of the PTFs. The root mean of square error (RMSE), mean error (ME) and index of agreement (d) were applied to evaluate the PTFs. Within every textural class, we furthermore evaluated the relative improvement (RI) of the continuous PTFs over the corresponding class PTF. The continuous PTFs were more accurate than class PTFs for finer textural classes while the former showed higher reliability in coarser textural classes. With an increase in relative particle size, prediction bias of class PTFs decreased RMSE was 8.55 and 3.88 in clay and sandy loam textural classes, respectively. Consequently, according to the results obtained in this study, for the prediction of soil CEC, continuous PTFs are suggested to be used for silty loam and finer textural classes while for loam and coarser classes application of class PTFs is preferred.
E. Habibi, M. A. Asoodar, B. Khalil Mogaddam,
Volume 18, Issue 67 (6-2014)
Abstract

Extensive tillage leads to the degradation of soil structure and aggregate stability. The effects of three different tillage implements including (combination tillage, chisel packer and disk), three levels of soil water content including (0.5, 0.7 and 0.9 plastic limit), three working speeds including (6, 8 and 10 km/hr) and two soil textures including (loam and silty clay loam soils) were studied. The study was carried out in Khuzestan Ramin Agriculture and Natural Resources University, in 2011. Soil aggregate mean weight diameter (MWD), geometric mean diameter (GMD) as determined by wet sieving method and soil surface roughness (SSR) were measured. Results showed that chisel packer with 0.744 mm MWD produced largest soil aggregates in both soils because of using narrow blade and shanks and small rake angles compared to other tillage treatments. Soil aggregate size was shown larger than other tillage treatments where chisel packer was employed but it was not suitable because of deep furrow shapes. Combination tillage was able to make a better soil condition to be used for seeding where the experiment was conducted.
H. Kashi, H. Ghorbani, S. Emamgholizadeh, S. A. A. Hashemi,
Volume 18, Issue 67 (6-2014)
Abstract

Change in land use and tillage practices has great influence on soil physical and chemical properties. The present study has focused on the effects of converting undisturbed soil to agricultural lands. Chemical and physical soil properties, infiltration, cation exchange capacity (CEC), electrical conductivity, pH, bulk density, porosity, sodium, potassium, total Ca + Mg, organic matter percentage, sodium adsorption ratio (SAR) and lime percentage were measured using standard frequently used methods. Fifty soil samples from agriculture land and other 50 soil samples from undisturbed land were collected from 0 – 30 cm depth and different statistical analysis were performed. Agriculture land is Cultivated for more than 20 years. The results showed that change in land use from undisturbed to disturbed soil did not significantly changed soil organic matter content. Also, soil electrical conductivity showed a huge increase whereas pH showed non-significant changes due to land use change. Unlike pH, SAR, organic matter percentage and lime percentage, some other soil parameters showed significant decrease in quality through land use change. Correlation coefficients of the effective factors were calculated to explain the main reason for lowering soil quality. The results showed that sodium in EC bulk density in porosity and CEC sodium and Ca+Mg in SAR EC in soil infiltration and Ca+Mg in organic matter showed the most correlation.
H. Taheri Sodejani, S.h. Tabatabaei, M. Ghobadinia, H. Kazemian,
Volume 18, Issue 67 (6-2014)
Abstract

Zeolites are substances that have been renowned for their remarkable nitrogen adsorption capacity resulting of decrease in leaching rate of soil nitrogen. This research was conducted to study the effect of the zeolite dosage, zeolite particle size and the method of application on the nitrate leaching of the soil irrigated by treated wastewater (TWW). All of the adsorption tests were carried out in a 27 PVC columns with 11 cm diameter and 60 cm length. The experiments were consisted of 9 treatments and 3 replications including 2 zeolite application method (mixed and layered), 2 zeolite’s grain size (63-125 and <63 micrometer) and 2 zeolite dosage (2 and 4 percent). Zeolite powders were added to the soil in mixed or layered fashion. The soil columns were irrigated 13 times with TWW in a weekly period. In the 4th, 9th and 13th irrigation event, three samples were taken from input and output TWW introduced to columns to measure the change in nitrate concentration. The results were shown that nitrate absorption rate was increased by average of 164.3% and 350.7% in mixed and layered treatments, respectively compared to the control. The result showed that zeolite application method, irrigation event, zeolite’s grain size and dosage were statistically significant on nitrate absorption efficiency (P<0.01). It shows that as the zeolite size decrease the soil nitrate adsorption increases significantly. It increases when the zeolite percentage increases. The result show that the soil nitrate adsorption decreases as the irrigation event increase and soil adsorption potential degraded with irrigation events.
A. Hasani Nekou, A. Karimi, Gh. Haghnia, M. H. Mahmoudy Gharaie ,
Volume 18, Issue 67 (6-2014)
Abstract

The aim of this study was to investigate the effect of parent materials and pedogenic processes on distribution of Pb, Zn, Cu, and Ni in the residual soils derived from different parent materials in the Binaloud zone, western Mashhad. Two soil profiles on the summit of granitic, ultrabasic and metamorphic rocks were described and sampled from their genetic horizons. Pseudototal concentrations of selected heavy metals and fractions of these metals were determined using aqua-regia and sequential extraction methods, respectively. 178.1-419.7 mg kg-1of Ni in ultrabasic soil versus 0.7-27.5 mg kg-1 in the granitic soil make the Ni a distinctive element in the studied area. Cu with the average contents of 60 and 56.3 mg kg-1 in the ultrabasic and metamorphic soils respectively showed more concentration in comparison to granitic soils with 12.1 mg kg-1. The amount of Zn was not significantly different among the soils, although the average of this element in the granitic soil (55 mg kg-1) is slightly more than the other soils. Pb was only detectable in the surface layers of all pedons reaching up to 6 mg kg-1. Residual fraction except Ni and Cu in granitic soil was the main fraction for all of the studied heavy elements that was expectable according to the low weathering intensity of the soils. The eolain addition of gypsum and carbonates have influenced heavy metals concentration, especially in surface horizons. In conclusion, the amount of heavy metals was significantly affected by parent materials and the eolian deposition must be considered as the secondary influencing factor.
N. Najafi, H. Towfighi,
Volume 18, Issue 67 (6-2014)
Abstract

Phosphorus behavior in waterlogged soils is significantly different from non-waterlogged soils. Changes in available phosphorus and inorganic phosphorus fractions after waterlogging in the paddy soils of north of Iran were studied in a laboratory research. A factorial experiment in a completely randomized design with two replications was performed with factors of soil at 14 levels (10 alkaline-calcareous and 4 non-calcareous or acid soils) and duration of waterlogging period at three levels (0, 30, 90 days). At the end of waterlogging period, phosphorus fractions in calcareous soils by Jiang and Gu method and in non-calcareous soils by Kuo method and available-P by Olsen method were determined. The results showed that the level of available-P in all soils was increased 90 days after waterlogging (on the average 2.3 times). In general, all P fractions were changed significantly after waterlogging and the amount of change was different depending on P fraction, soil type, and duration of waterlogging period. These results indicated the complex behavior of P in soils. The Al-phosphates were increased in 12 out of 14 calcareous and non-calcareous soils 90 days after waterlogging compared with air-dry soil. The Fe-phosphates were decreased in 9 out of 10 calcareous soils 90 days after waterlogging compared with air-dry soil while the effect of duration of waterlogging period on the Fe-phosphates in non-calcareous soils was not significant. The readily soluble-P in non-calcareous soils increased 30 and 90 days after waterlogging. The results indicated that some inorganic P fractions transformed into other fractions and probably organic P transformed into inorganic P during soil waterlogging period.
M. Bahmani, M.h Salehi, I. Esfadiarpoor,
Volume 18, Issue 67 (6-2014)
Abstract

One of the main objectives of soil classification systems is to identify the differences of soil properties for management purposes. In this study, the efficiency of American and WRB soil classification systems were compared in order to describe some of soil physical, chemical and mineralogical properties in arid and semiarid regions of central Iran. Khatoon-Abad and Mobarekeh plains as arid regions and Koohrang and Shahrekord plains as semiarid regions were selected. Then, representative pedons of each plain were chosen from 16 excavated pedons and soil samples were taken from the genetic horizons to determine soil classification. Results showed that soil orders of both Koohrang and Khatoon-Abad plains are vertisols according to American soil classification system whereas based on WRB system, these soils are classified as cambisols and calcisols, respectively. On the other hand, both Mobarekeh and Shahrekord soils are classified as calcisols in WRB system whereas these soils are classified as aridisols and inceptisols, respectively, according to American soil taxonomy. None of soil classification systems could show the existence of gypsum in horizons lower than 100 cm of the soil surface for Mobarekeh soil. Clay mineralogy indicates that smectite is the dominant clay mineral in Koohrang soil as explains well at the family level of American soil classification system. Results suggest that WRB has somewhat higher efficiency rather than American soil classification system for the studied soils.
M. Kiani, M. Gheysari, B. Mostafazadeh-Fard, M. M. Majidi and E. Landi, , , , ,
Volume 18, Issue 67 (6-2014)
Abstract

The purpose of this study was to measure daily and seasonal evapotranspiration and daily crop coefficient of two common varieties of sunflower (Sirna and Euroflor) via drip-tape irrigation system. For this purpose, the sunflower water use was determined by daily monitoring of soil moisture at the depths of 10, 20, 30, 40 and 60 cm, and the crop evapotranspiration (ETC) was measured using volume balance method. According to the equation recommended by FAO, the obtained value of KC for Euroflor and Sirna varieties at the initial stage was 0.32. According to volume balance method, the Euroflor KC value for development, middle, and late stages were found to be 0.75, 1.18 and 0.9 and for Sirna were found to be 0.72, 1.15 and 0.84 respectively. Seasonal amount of evapotranspiration for Euroflor and Sirna varieties was equal to 601 and 575 mm, which was 26 and 30 percent less than seasonal ET0 in Isfahan. The average value of during the sunflower growing season was 0.77, which was greater than that offered by Doorenbose and Pruitt (0.55). As the crop coefficients of two varieties were different during the growing season and they were also different from FAO KC, measuring the actual amount of KC as a function of growing degree days can increase the accuracy of the estimated ETc and help develop the crop models in order to improve the irrigation management.
I. Esfandiarpour Boroujeni, Y. Safari,
Volume 18, Issue 67 (6-2014)
Abstract

Comparison of the land suitability variations among the soil map units in viewpoint of pedodiversity indices may provide a good assessment of the soil mapping precision. The main objective of this study was to assess the significance of functional pedodiversity thorough two detailed map units for irrigated wheat and potato for class and subclass levels of suitability in the Faradonbeh plain, using Shannon and Simpson indices. First, soil samples at 35 and 47 sampling sites in the D and E map units, respectively, were collected from the depths of 0-25, 25-50, 50-75 and 75-100 cm. Then, the qualitative land suitability class and subclass of all sampling points for each studied land use, was evaluated based on simple limitation method. Although both indices showed higher values in the subclass level of suitability, but the average functional pedodiversity of the studied map units, indicate a significant difference (95% confidence level), just in this suitability level. It was observed that the significance of the pedodiversity indices is not influenced by the land use type or the analyzed diversity index. Hence, as a supplementary procedure to study the intra-unit variation of the soil maps, use of diversity indices may provide some worthwhile information
N. Nourmahnad, H. Tabatabaei, A. R. Hoshmand, M. R. Nouri Emamzadei, Sh. Ghorbani Dashtaki,
Volume 18, Issue 68 (9-2014)
Abstract

Usually, dry soil readily absorbs water .However, not all soils display such characteristics. Some soils (hydrophobic soils) show resistance to wetting. Because of the importance of this subject and lack of research, we evaluated the effect of heating on water repellency and some of soil physical and chemical characteristics. So soil was combined with compost and heated at deferent temperatures, 100, 200, 300, 400 and 500 °C for 30 minutes in an oven or muffle furnace. The results showed that control treatment and heated soil at 300 °C had WDPT and MED 45 (s), 17% and 80 (s), 23% respectively. So, little water repellency was present prior to heating the soil. When soil was heated up to 300°C, intense water repellency resulted, but it was abruptly eliminated by increasing the heating. The soil texture was changed from loam to sandy loam at high temperatures (400 & 500 °C) and the sand percentage was increased. Organic matter decreased by increasing the temperature. Amount of pH decreased up to 200 °C and then increased at 500°C because of increasing ash in soils. Diminution of mineral and organic matter caused EC to decline in all the heated soils.
M. Sarmast, M. H. Farpoor, M. Sarcheshmehpoor, M. Karimian Eghbal,
Volume 18, Issue 68 (9-2014)
Abstract

Biocalcite infilling and bridging in a sandy soil was studied in the present research. Effects of 2 bacterial species (Sporosarcina pasteurii and Sporosarcina ureae), 3 reactant concentrations (0.5, 1.0, and 1.5 M of urea and CaCl2 mixture), and 6 reaction times (12, 24, 48, 96, 192, and 288 hr) on saturated hydraulic conductivity and mechanical strength of a sandy soil were studied as a factorial experiment. Soil samples were selected from sand dunes of Joopar area, Kerman Province. Bacterial inoculums and reactant solutions were daily added to soil columns. Results of the study showed that S. pasteuriihad had a higher effect on decreasing hydraulic conductivity of the treated samples (11.57 cm/h) compared to the blank (41.61 cm/h) than S. ureae. Increasing reaction times (from 12 to 288 hrs) and reactant concentrations (from 0.5 to 1.5 M) decreased hydraulic conductivity by 49 and 16 %, respectively. S. pasteurii increased strength of treated samples up to 2.6 Mpa pressure compared to S. ureae. Reactant concentrations and reaction times increased soil strength significantly (2.13 and 4.1 Mpa, respectively). Micromorphological observation showed calcite crystals bridging soil particles and filling pore spaces.
J. Abedi Koupai, S. S. Eslamian, S. Y. Hasheminejad, R. Mirmohammad-Sadeghi,
Volume 18, Issue 69 (12-2014)
Abstract

Phytoremediation models are important to understand the processes governing phytoremediation and the management of contaminated soils. Little effort has been made for evaluating the potential of the phytoremediation of metals based on the mathematical models. Therefore, the purpose of this study was modeling the phytoremediation of the nickel-contaminated soils. For this purpose, a model was recommended for estimating the rate of the phytoremediation of nickel from the soil by means of relative transpiration reduction and concentration of nickel in the plant functions. To evaluate the model, soil was contaminated with different levels of nickel by nickel nitrate. Then, the pots were filled with contaminated soil and Basil (ocimum tenuiflirum L.) seeds were planted. To avoid the dry tension, the pots were weighed and irrigated to the point of field capacity (FC) at short time intervals (48 hours). The plants were harvested in four times. At each harvesting stage, the relative transpiration values and nickel concentration in the soil and plant samples were measured. The performance of the model was evaluated by statistical methods such as Maximum Error, Root Mean Square Error, Coefficient of Determination, Efficiency of Model and Coefficient of Residual Mass. Results demonstrated that in the case of nickel contamination in soil, changes in the relative transpiration of Basil can be measured by the two proposed models and the linear model (R2=0.94) has a better performance compared to the nonlinear one (R2=0.84). Also the model obtained from the combination of linear function and nickel's concentration in soil has a relatively good (R=0.7) fit with the measured values of the remediation rate of nickel in soil.


F. Moradi, B. Khalilimoghadam, S. Jafari, S. Ghorbani Dashtaki,
Volume 18, Issue 69 (12-2014)
Abstract

Soft computing techniques have been extensively studied and applied in the last three decades for scientific research and engineering computing. The purpose of this study was to investigate the abilities of multilayer perceptron neural network (MLP) and neuro-fuzzy (NF) techniques to estimate the soil-water retention curve (SWRC) from Khozestan sugarcane Agro-Industries data. Sensitivity analysis was used for determining the model inputs and appropriate data subset. Also, in this paper, the van Genuchten and Fredlund and xing models were used to predict SWRC. Measured soil variables included particle size distribution, organic matter, bulk density, calcium carbonate, sodium adsorption ratio, electrical conductivity, acidity, mean weight diameter, plastic and liquid limit, resistance of soil penetration, water saturation percentage and water content for matric potentials -33, -100, -500 and -1500 kPa. The results of this study in terms of various statistical indices indicated that both MLP and NF provide good predictions but the neural network provides better predictions than neuro-fuzzy model. For example, using MLP and NF models values of NMSE at prediction &theta;s, &theta;r, &alpha;, n and m in Fredlund and Xing equation corresponded to (0.059, 0.065), (0.154, 0.162), (0.109, 0.117), (0.129, 0.135) and (0.129, 0.145), respectively. Furthermore, &alpha; and n parameters at the first depth, and &theta;r and &alpha; parameters at the second depth in Fredlund and Xing equation were estimated with higher accuracy compared with equivalent parameters in van Genuchten equation


S. Jafari, H. Nadian,
Volume 18, Issue 69 (12-2014)
Abstract

The aim of this study was to evaluate soil properties changes in a soil toposequence series in Khuzestan province. Twelve soil profiles were dug in north to south direction in this province, according to the changes of the slope in Karoon’s alluvial deposits. The results showed that soil texture regularly changes to heavier form from north to south. It was slightly of redoxomorphic features in low land. Therefore, salic horizon was formed in this land. Despite high water table in this area, gray or mottle forms were few due to high soil salinity. The carbonates were eluviated from surface to subsurface horizon therefore, calsic horizon was formed due to illuviation. Secondary carbonate accumulation was maximum in the studied area. Both classic horizon and cambic horizon were formed in some pedons under long time cultivation in north regions. These developments were originated from organisms that grew under good drainage class. The smectite was seen in the south part of region. It may have been transported by river and deposited under high salinity and flocculated in contact to Persian Gulf’s saline water. The palygorskite was not seen in all patterns. This clay was removed in pedons under long time cultivation in the north area due to more leaching. High irrigation water can accelerate palygorskite transformation. Also, the XRD patterns showed that chlorite, illite, kaolinite and quartz were main clay minerals in the studied soils.


S. Jahanbakhshi, M. R. Rezaei, M. H. Sayyari-Zahan,
Volume 18, Issue 70 (3-2015)
Abstract

Phytoremediation is one of the cleanup methods of polluted soil that is possible accumulation of heavy metals in plant tissues, exclusion of these elements from contaminated soil. Therefore, to achievement the objective, this research was done in pot culture using completely randomized design at the University of Birjand in 2011. Two species Spinacia oleracea and Lepidium sativum were used to remove or reduce the concentration of Cadmium (Cd) and Chromium (Cr). In this study, different levels of Cadmium (CdCl2) concentrations including 5, 50, 100 mg kg-1 and also chromium (CrCl3) concentrations 50, 100, 150 mg kg-1 were used respectively and control as well for each species with three replications. Results indicated that the Cd and Cr concentration in shoot of Spinacia oleracea and Lepidium sativum significantly affected by their concentration in soil (p<0/01). Results revealed that increasing of Cd and Cr concentrations in soil, showed an increase concentration of both metal in shoot of Spinacia oleracea. increasing of Cd concentrations in soil, showed an increase concentration of it in shoot of Lepidium sativum but the concentration of Cr was less. Also, comparison of cadmium and chromium concentrations in shoot of Spinacia oleracea and Lepidium sativum showed that two species showed same behavior of Cd and different behavior Cr concentration. So the analysis of data showed that both of species are appropriate for absorption of Cd and Cr and phytoremediation technology as well. It can be concluded that in high soil Cr concentration for phytoremediation Lepidium sativum is not appropriate.


N. Parsamanesh, M. Zarrinkafsh, S. S. Shahoei, Weria Wisany,
Volume 18, Issue 70 (3-2015)
Abstract

Reduction of quality and soil productivity due to organic carbon losses is one of the most important consequences of land use changes, that creates irreparable effects on the soil. To evaluate the land use effect on the amount of soil organic carbon in Vertisols, Sartip Abad series with extent of 1850 hectare in south of Bilehvar area in Kermanshah province was studied by using the completely randomized block design in factorial experiment with 10 repeats in farmland and grassland, some soil physical and chemical properties in two Lands compared with each other. The results showed that the soil organic carbon in surface horizons of grassland has been more than farmland and accordingly increase the amount of sequestrated carbon in grassland. No significant differences were found in the amount of soil organic carbon in lower horizons of two lands. Due to land use change from grassland to farmland, noticeably increase in Bulk density, Nitrogen, Acidity, soil Electrical Conductivity and decrease the organic carbon percent and the soil organic material. Pedutorbation, clay amount (higher of 50%), numerous small subsoil, and stable structure are the important factors in saving the organic carbon of vertisols that can reduce the effects of land use changes on organic carbon amount. Generally, it can be conclude that: the land use changes not only can create the severe damage on soil physical and chemical properties but with the carbon losses and more release of greenhouse gases exacerbate the pollution of environment which endangers the life in a earth planet.



Page 9 from 18     

© 2024 CC BY-NC 4.0 | JWSS - Isfahan University of Technology

Designed & Developed by : Yektaweb