Showing 153 results for Tin
H. Yosef-Zadeh, K. Spahbodi, M. Tabari, Gh. Jalali,
Volume 11, Issue 40 (7-2007)
Abstract
In this investigation, the effect of seed source on the germination and survival of Acer velutinum Boiss. was assessed. Seeds were collected from 11 seed sources ( located at 20 to 2200 meter a.s.l in Mazandaran forests) and planted in a mountain nursery (Orimelk located at 1550 meter a.s.l) as completely randomized block design with three replications. The results show that the effect of seed source on germination and survival was statistically significant (p<0.01). Germination and survival rates were lower for the Pasands, Ashak and Deis sources, and the maximum seed germination was related to Lamzer site. Effect of seed sources on survival of seedling was significant too. The maximum and minimum survival was related to Lajim and Ashak, respectively. Regarding plan table seedling, the effect of seed source was significant. The maximum efficiency of seedlings has been found in Lajim, Lamzer, Parke Noor and Sangdeh sites, while the minimum range of efficiency was related to Ashak and Pasand2.
M. H. Raoufat, M. Kazemi Najaf Abadi,
Volume 11, Issue 41 (10-2007)
Abstract
The present research was intended to alleviate the problems and costs of deep tilling in sugarcane production in Mian-Ab sugarcane farms located in Khuzestan province, Iran. The main objective was to investigate the feasibility of subsoiling operations with bentleg subsoiler (BLS) equipped with shallow tines, a combination expected to increase the critical depth resulting in less power consumption and improved soil physical conditions. Six treatments arranged in a completely randomized block design were used to measure the draft force (except for the bulldozer mounted rippers), disturbed soil cross-sectional area and penetration resistance. The treatments included (1) subsoiling with rippers mounted on bulldozer, (2) BLS without attachment, (3), and (4) BLS equipped with single tine at working depths of ½ and ⅓ of target depth, (5) and (6) BLS equipped with two tines at ½ and ⅓ target depth. The experiment was replicated three times. The results indicated that BLS without attachment had the highest draft requirement as compared with other BLS treatments with shallow tines. In general, tine attachment resulted in less draft mainly due to displacement of critical depth to lower soil zones. Increasing the number and depth of shallow tines resulted in less draft force. The BLS equipped with two tines working at ½ target depth exhibited minimum drawbar power. The inclusion of shallow tines resulted in 21% reduction in drawbar power requirement as compared to BLS without tine attachment. The cross-sectional area of the soil tilled by ripper was minimum. Furthermore, the tilled area was not uniform and subsequent subsoiling operations were needed. The average soil cross-sectional area per unit width was improved by BLS treatments by a factor of 2.3 as compared with that of ripper. The highest cone index was obtained in plots tilled by ripper the BLS reduced this index in a significant manner. The soil worked with subsoiler equipped with tines exhibited the least resistance. The range of wheel slippage for BLS treatments was 12-16% which lies in the upper end of the recommended range for optimum traction efficiency. The proposed idea proved prominent in subsoiling fine textured compact soils.
A. Hosseinzadeh Colagar, A. Mostafaie, M. Motallebi, M.r. Zamani,
Volume 11, Issue 41 (10-2007)
Abstract
Plant pathogenic microorganisms produce a variety of enzymes capable of degrading different polysaccharides of the plant cell walls. Pathogens use these enzymes to penetrate and colonize host cells. Polygalacturonases are thought to be the first cell wall-degrading enzymes secreted by pathogens when they grow on plant cell walls. Oligogalacturonic acids with the polymerization degrees of 10 to 13 are intermediate products of pectin degradation by the action of polygalacturonases and are known to activate plant defense responses. PG- inhibiting proteins (PGIPs) present in the cell wall of many plants increase the stability of oligogalacturonic acids in the tissues by modulating fungal PG activities. These glycoproteins of the plant cell extracellular matrix retard the advancement of fungal hyphae, reduce tissue maceration, and prevent colonization of pathogen. In this study, Phaseolus vulgaris PGIPs were extracted from hypocotyle of Derakhshan and Naz bean cultivars. PvPGIPs were purified by afinity chromatography and analyzed by SDS-PAGE. Three major bands in the range of 47-55 kDa were detected. Average yield of The affinity-purified PGIPs was 1.68 mg per 100 gram of fresh bean hypocotyle. The inhibitory effect of PGIP was assayed on the PG activities of highly virulent isolates of Fusarium oxysporum (F15) and Ascochyta rabiei (IK04). The inhibitory activity of crude PGIP from Naz and Derakhshan cultivars on polygalacturonase activity of F. oxysporum was 18 and 28 units, respectively. These inhibitory activities increased to 40 units after purification. The inhibitory effect of crude PGIPs from both these two cultivars on PG activity of A. rabiei was 9 units, while purified PGIPs inhibited this PG activity to 18 and 29 units, respectively.
A. Goleij, H. Jalilvand, M. R. Pormajidian, M. Tabari, K. Mohammadi Samani,
Volume 11, Issue 41 (10-2007)
Abstract
In order to investigate the success of natural regeneration and to determine the best area for regeneration settlement, 12 gaps with the areas ranging from 50-100, 150-300, and 400-600 m2 and 4 replicates equal elevation level were selected. For measuring frequency, height, and collar diameter of regenerated seedlings, a certain number of 2 m2 subplots were carried out inside the gaps, along the bigger diameter, and related to each gap’s area. Results showed that the number of seedling varies from 5 (in big gaps) up to 28 (in small and moderate gaps) per square meter. Furthermore, there was not a significant difference between the number of seedlings in small and moderate gaps. In contrast, the number of seedlings in small and moderate gaps was significantly different from those in large gaps (at 1% Probability). This finding demonstrates that natural regeneration would be limited in large gaps (400-600 m2) but it shows a better result in smaller gaps, associated with single- tree harvests. The final result of this study shows that the most appropriate area for selective cuting in such an area is up to at most 300 m2.
P. Heydaryzadeh , M.r. Khajehpour,
Volume 11, Issue 42 (1-2008)
Abstract
During the past years, safflower genotypes have been selected from local variety of Isfahan, named Kouseh. The response of these genotypes to planting date might be different. To determine this, performances of several genotypes selected from Kouseh plus Arak 2811 ) as check ( were studied at the Agricultural Research Station, Isfahan University of Technology in 2002-2004. The experiment was conducted using a split-plot arrangement within a randomized complete block design with three replications. Planting dates were considered as the main plots and subplots consisted of 22 genotypes of safflower. Number of days from planting to emergence was highest (18.0 days) in early spring planting and lowest (10.3 days) in late spring planting. Days from planting to head visible, flowering and physiological maturity were decreased with delay in planting from autumn to late spring. Days from planting to emergence, head visible and physiological maturity were not influenced by genotype. Genotypes C116 and DP29 had the highest (145.0) and genotype ISF28 the lowest (140.2) days from planting to flowering. Plant height, number of first and second degree branches, number of heads per first and second degree branches, number of seeds per head, 1000-seed weight and seed weight per plant reduced significantly with delay in planting from autumn to late spring. Genotypes C128 and DP7 had the highest (120.0 and 120.5 cm, respectively) and genotype DP9 the lowest (104.2 cm) plant height. Genotypes DP6 and DP9 had the highest (12.8) and the lowest (6.7) first degree branches per plant, respectively. Arak-2811 had the highest (16.9) and genotypes DP9 and DP5 the lowest (7.2 and 7.1, respectively) second degree branches per plant. Number of heads per first degree branches was not significantly affected by genotype. Arak-2811 and genotype C114 had the highest (12.8 and 12.2, respectively) and genotype DP9 the lowest (5.1) number of heads per second degree branches. Genotype DP7 had the highest (45.9) and genotype C111 had the lowest (28.0) number of seeds per head. Genotypes DP3 and C128 had the highest (34.2 g) and lowest (22.0 g) 1000-seed weight, respectively. Genotype DP25 had the highest (20.5 g) and genotypes DP29 and DP9 the lowest (9.9 and 10.0 g) seed weight per plant. Harvest index was not affected by planting date and genotype. The result of this study showed that safflower may yield more in fall planting under conditions similar to this experiment. Genotype DP25 might be recommended for this planting date, genotypes ISF66 and DP25 for early spring planting and genotypes DP7 and ISF14 for summer planting.
S. Rastegar , M. Rahemi,
Volume 11, Issue 42 (1-2008)
Abstract
Navel oranges and Clementine mandarin are classified as early cultivars and when fruits are left on the trees, fruit firmness and juice content will decrease. Plant growth regulators have been used to improve fruit quality. Gibberellic acid (GA3) and 2,4-D isopropyl ester sprays were used to increase juice content ,peel firmness and delay senescence in Navel oranges and Clementine mandarin. Factorial experiments were arranged in a complete randomized block design with three replications and each block consisted of three trees. Chemicals were sprayed on the branches (north and south of each tree) with 10 liter sprayer to the point of run-off during fall of 2004 and 2005 ,in a commercial orchard in Jahrom in the south east of Fars province, Iran . In both years of study, GA3 at 100,150 and 200 mgl-l and isopropyl ester 2,4-D at 8,12 and 24 mgl-1 were sprayed on September 30 (diameter of Navel 64 mm and diameter of Clementine 46 mm), October 14 (diameter of Navel 69 mm and diameter of Clementine 48 mm ) and November 7 (diameter of Navel 70 mm and diameter of Clementine 50 mm) and fruits of Navel oranges and Clementine mandarin were harvested 45 and 35 days after last the spray treatment, respectively . The results of experiment revealed that Navel oranges responded better with second application (Oct.14, diameter 69 mm ) and Clementine mandarin with the first application (Sept.30, diameter 46 mm ). Juice content and fruit firmness at harvest increased. GA3 increased juice content even better than 2,4-D isopropyl ester but delayed senescence, 2,4-D was more effective in increasing fruit sizing in both cultivars. GA3 at 150 and 200 mgl-1 and 2,4-D at 24 mgl-1 when compared with the untreated resulted in highest juice content of fruits.
A. Ahmadi, A.m. Amini,
Volume 11, Issue 42 (1-2008)
Abstract
The purpose of this research was to study factors on farmer’s request to land consolidation projects and also consolidation’ adventages in utilization units. The data of this study was collected through completing questionnaires and interviewing 34 experts connected with administrating of land consolidation projects in agricultural offices and service centers in Kermanshah township and Lenjanat region in Isfahan. Data was also collected through visiting some performed and performing projects. The results showed that in Kermanshah land consolidation improves the technology, farm management and land more than other production factors. In Lenjanat it improves technology and farm management in comparison with other factors. In both regions the aplicant villages of the projects have a larger ownership and more fragmentaed parcels than other villages. Moreover they have younger exploiters, more educated and less in number. It is also notworthy that these regions obtain more extention education, are nearer to agricultural offices, and have closer relation with extention agents.
H.r. Moradi, M. Vafakhah , A. Akbari Baviel,
Volume 11, Issue 42 (1-2008)
Abstract
Discharge routing as a mathematic process to forecast the changes of greatness, speed and form of flood wave is function of time in one or more points along drainage, canal or reservoir. Hydrologic and hydraulic methods are used to accomplish the flood routing. Although hydrologic method is less accurate than hydraulic methods but it is simpler to use in flood control and designing works with acceptable confidence. This study has been conducted for flood routing in Lighvan River from Lighvam hydrometric station to Hervy hydrometric station in eastern Azerbaijan Province in a distance the 12 Km. The discharge for different return periods (2, 10, 20, 50 and 100 years) was calculated by using upstream stations data. Then routing of every flood discharge was studied with different return periods by Muskingum and Muskingum-Cunge methods. Results showed significant difference between calculated discharges routing by two methods with discharge values to relate that return period in Hervy hydrometric station. The reasons of exist this different, is numerous for example mountain location this area and to exist sub drainage in between two stations and etc.
M. Karimi, M. Hassanpour Asil, H. Samizadeh Lahiji, S. Talesh Sasani,
Volume 12, Issue 43 (4-2008)
Abstract
Experiments were conducted to study the effects of temperature and chemical treatments on the vase life of cut Asiatic hybrid lily cultivar Pisa, with sixteen chemical treatments using factorial design with 3 replication arrangements. Lilium cut flowers were harvested when the first flower colored fully. Following chemical treatments, they were grouped in different combinations before storage. The treatments included sucrose, 8- hydroxy quinoline sulfate (HQS), citric acid (CA), gibberellic acid (GA3), kinetine (KI) and distilled water as control. Lilium cut flowers were pulsed for 24 hours in different solutions, then brought out and kept in the distilled water at temperatures of 4°C and 22 ° C .Effects of applied treatments were evaluated on different characteristics like vase life, the amount of water absorbed, flower diameter, total soluble solids and fresh weight. Results showed that the temperature of 4°C had the most effect on vase life, keeping the quality of lilium cut flowers. The results also displayed that the chemical treatments kinetine + sucrose had the most effect on vase life and percentage of sucrose, gibberellic acid + kinetine delayed yellowing of the foliage, 8- hydroxy quinoline absorbed the most amount of water, and treatments sucrose + kinetine , gibberellic acid + 8- hydroxy quinoline sulfate and gibberellic acid + citric acid were most effective in increasing the flowers diameter.
A. Mohammadi Mohammadabadi, S.j. Hosseinifard, N. Sedaghati,
Volume 12, Issue 43 (4-2008)
Abstract
Effect of change from the conventional (flooding) to subsurface irrigation system was studied on mature pistachio trees (Cultivar Ohadi) in Kerman pistachio research station for four years. This experiment was carried out in a randomized complete block design including 7 treatments and 3 replications. The experiment also used two irrigation intervals (7&14 days) and three water rates according to pan coefficient (20%, 40%& 60% evaporation from surface of class A pan) for subsurface irrigation system with 6 treatments the conventional (flooding) irrigation system was tested as control. The pipes of subsurface irrigation system were installed at 90cm distance from trees trunk at each side of trees, and 50cm from soil surface. Mean of pressure and discharge in the pipes was 0.8 to 1 atmosphere and 5.4 Lh-1m-1, respectively. Different factors of quantity and quality pistachio yield, current vegetative growth, water use efficiency and soil electrical conductivity were measured. The results showed that change of conventional (flooding) to subsurface irrigation system is possible and the best treatment can have water rate of 7174 m3ha-1y-1 with 14 days irrigation interval. In comparison with other treatments, this treatment has better quantity and quality pistachio yield. Water use efficiency (WUE) of this treatment was 164g dry yield per cubic meter. Nevertheless, application of water rate of 4783 m3ha-1y-1 can result in the deficiency of irrigation water. At this water rate, WUE was 177g dry yield per cubic meter. However, it was found that the application of lower water rate (<4783 m3ha-1y-1) produced severe effects on the treated pistachio trees, e.g. decreasing the growth rate, yield and increasing the early splitting in pistachio fruits. Finally, it is concluded that 14-day interval irrigation is the preferred treatment for pistachio trees. Also, soil salinity showed considerable change in subsurface irrigation treatments after irrigation system was changed, especially in the first year.
M. Salehi , R. Akbari , M.b. Khorshidi Benam,
Volume 12, Issue 43 (4-2008)
Abstract
In order to determine the response of yield and seed yield components of red bean )Phaseolus vulgaris L. ( genotypes to delay in planting, this study was conducted in Factorial experiment based on a RCB design with 3 replications in the Jahad-Keshavarzi Research farm of Miyaneh in 2006. Factors included cultivars in three levels(Naz, Gole and Sayad) and planting date in three levels (5 and 20 April, and 5 May). Results of variance analysis showed that the cultivars and planting dates had significant effects on all the characteristics. The interaction between cultivars and planting dates had significant effect on stem height, number of pod per plant, 100 seed weight, biological yield, grain yield and number of seed in pod. The Results of mean comparison indicated that SAYAD cultivar in the first planting date with 4033.3 kgha-1 and Gole cultivar in the third planting date with 1500.2 kgha-1 had the highest and lowest grain Yield, respectively. Total yield with all traits, except for the stem height, 100 seed weight and cultivar protein percentage showed a positive and significant correlation.
H. Barzegar , A. Karbassi, J. Jamalian, M. Aminlari,
Volume 12, Issue 43 (4-2008)
Abstract
Chitosan, a deacetylated derivative of chitin, is found in crustacean, arthropod, shell fish and shrimp shell as well as cell walls of some fungi . The objective of this research was to investigate the antimicrobial property of chitosan and possibility of its use as a natural preservative in mayonnaise. In this study, chitosan was produced by chemical method from shrimp shell. The antimicrobial activities of chitosan against Salmonella enteritidis and Lactobacillus plantarum were explored by calculation of the Minimum Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC) in media supplemented with 0.1, 0.2 , 0.3, ..., 0.9 , 1 mg/ml chitosan adjusted to pH 5 or 6 . The MIC and MBC of chitosan differed with pH and bacterial type, ranging from 0.4 to 1 mg/ml. Antibacterial activity of chitosan was inversely affected by pH, with higher activity at lower pH value. The sauce containing 0.1, 0.2 or 0.3% chitosan was inoculated with 106 CFU/gr S. enteritidis or L. plantarum and stored at 5°C and 25°C for 8 days. The inhibitory effect of chitosan concentration was increased from 0.1 to 0.3%. This investigation demonstrated that 0.2% chitosan can be used in mayonnaise as a new preservative.
J. Abbas Palangi, A. M. Akhond Ali,
Volume 12, Issue 44 (7-2008)
Abstract
For an appropriate drip irrigation system design, a prediction of soil wetting pattern is needed for a given soil texture. The wetting pattern geometry is a key factor for emitter distance determination as well as crop type. The geometry of the wetting bulb is dependent on the parameters such as soil hydraulic properties, emitter discharge and the irrigation time. This study has been conducted in Albaji region in km 25 on the Ahvaz-Andimeshk road, in order to estimate the geometry of the wetting pattern under the point source trickle emitters in sandy soil with different discharge. The emitters were calibrated to provide 5, 10, 20, 30 and 40 liter per hour discharges. The maximum wetted soil surface and depth was measured by digging the irrigated soil. Two models were developed to predict wetted soil surface diameter and depth under a point source based on Buckingham's π theorem. The equations were calibrated by using the measured data. Then resulted scientific-empirical equations have been evaluated. Considering the maximum relative error of 14.3% and root mean square error of 3.8cm in estimation of the wetted soil surface diameter and depth, the models are recommended to estimate the geometry of the wetting bulbs with a high degree of accuracy, and can be used in designing and appropriate drip irrigation system management
A. Karimi, H. Khademi, A. Jalalian,
Volume 12, Issue 44 (7-2008)
Abstract
Despite the existence of highly silty soils in southern Mashhad, there is no information about the aeolian and /or in situ formation of these soils. The main objective of this study was to determine the source of silt generation in this area. Granitic hilly lands in southern Mashhad have been covered by silty deposits. Based on the soil origin, four profiles including a residual soil covered by a silty layer, a residual soil with low amount of silt, a highly silty soil and an alluvial soil as well as a deep profile containing a succession of silty and alluvial materials were studied. Cumulative particle size distribution curve (CPSDC), depth distribution curves of silt/sand ratio (Si/S), Folk inclusive graphic standard deviation, Folk inclusive graphic skewness (SKI) and sand grain morphology analyzed by scanning electron microscopy (SEM) were determined and used to identify the source of the silty materials. Based on the results obtained, silty (L), residual-silty (R-L), residual (R), alluvial (A) and alluvial-silty (A-L) horizons were identified. CPSDC of L horizons is sigmoidal in shape and is easily distinguishable from that of the other horizons. In contrast, the CPSDC of alluvial and residual horizons is spherical in shape. CPSDCs for R-L and A-L horizons are neither sigmoidal nor spherical, but something in between. The L horizons have the highest SKI (very skewed to fine particles) and the lowest Folk inclusive graphic standard deviation (very badly sorted). In this regard, alluvial and residual horizons are intermediate. Because of the silt addition to R-L and A-L horizons, these horizons have a nearly zero SKI (symmetrical) and the highest Folk inclusive graphic standard deviation (very badly sorted). Particle size distribution histograms of R-L and A-L horizons are bimodal, a mode for sand and a mode for silt, suggesting two different sources. Depth distribution of Si/S, SKI and Folk inclusive graphic standard deviation of highly silty and other horizonz show a drastic change between L horizons and the other horizons-an indication of lithologic discontinuity and difference in origin. In conclusion, despite the possible contribution of granitic parent rocks to silt generation in the area, loess deposits recognized appear to have mostly been transported by aeolian movement.
E. Abdi, B. Majnounian, A. A. Darvishsefat,
Volume 12, Issue 44 (7-2008)
Abstract
One of the most important cost factors in forest management, which involves a great deal of investment costs, is road construction. So evaluating forest roads and determining the best one can decrease costs. The objective of this study was to evaluate forest roads using Multi Criteria Evaluation with respect to costs. In Multi Criteria Evaluation method such factors as slope, aspect and soil type were used for suitability map. Then factors were compared in pair-wise comparison in the context of a decision-making process known as the Analytical Hierarchy Process (AHP) to develop weights of map layers. To do this, the opinions of some experts were collected using questionnaires and the results were integrated and factor weights were calculated. Then weights and their factors were entered into Multi Criteria Evaluation (MCE) Module to create final suitability map (factors were standardized before combining). Total costs of each variant were extracted from suitability map. After variant costs were obtained by dividing each variant total cost by its length, unit cost of each variant was calculated. Finally, unit costs were compared and the variant with the lowest costs was determined. The results showed that the slope had the greatest weight followed by soil and aspect. Also, variant 7 had the lowest cost and variant 8 the greatest cost. AHP method has the capability of considering qualitative and quantitative criteria so it is a proper method for weighting. Also MCE method in GIS environment has the capability of combining different factors. As it requires less time and cost, also has a higher precision, it is better to use MCE method in such studies.
M. Amini Dehaghi, S.a.m. Modarres Sanavy, F. Fattahi Neisiani,
Volume 12, Issue 45 (10-2008)
Abstract
In order to study the effect of planting dates and genistein on nitrogen content and nodulation of three annual Medicago species (Medicago polymorpha cv. Santiago M. rigidula cv. Ragidula, and M. radiata cv. Radiata), an experimental study was conducted during 2004-2005 on the Research Farm of Faculty of Agriculture, Tarbiat Modares University, Tehran (35°43′N and 51°8′E). The factors were arranged as split-split plot in a randomized complete block design with four replications. Planting dates (February 20, March 1 and 11) were randomized to main plots and three annual medics were located in sub-plots, and genistein (0 and 20 μM) was randomized to sub-sub-plot units. Plant nitrogen contnt, nodulation and other traits were significantly different in species and M. polymorpha was better than other species in view of dry nodule weight, nodule number, nodule number in each cluster, nodule cluster number and nodule diameter. Medicago rigidula had more resistance to cold than other varieties, and its forage yield and nitrogen percentage were better than M. polymorpha. Therefore, M. rigidula may be better suited for cold zones. Twenty μmol genistein had remarkable effect on nodulation and nitrogen percentage of annual medics in comparison with control. The result showed that genistein modified negative effect of low temperature environment on nodulation and nitrogen percentage of annual medics. Nodulation and nitrogen percentage increased in all varieties at the first planting date. This finding emphasizes that genistein has a considerable effect on cold resistance establishment in varieties for improving nodulation and increasing plant nitrogen percentage in farm condition.
S. Fallah,
Volume 12, Issue 45 (10-2008)
Abstract
To study the effects of planting date and density on yield and its components in chickpea (Cicer arietinum L.) genotypes under dryland conditions of Khorram-Abad, an experiment was conducted during 2005-2006 growing season at the Agricultural Research Station of Lorestan Weather Department. Three sowing dates (March 6, March 21, and April 5) and two chickpea genotypes (Greet and Flip 93-93) with four plant densities (18, 24, 30 and 36 plants m-2 ) were evaluated using a randomized complete block design with split-factorial design in three replications. Dates of planting were considered as the main plots, genotypes and plant densities were randomly distributed in sub-plots with factorial arrangement. The result showed that delay in planting from March 6 to April 5 significantly reduced number of pods per plant, number of grains per pod, 100-grain weight, grain yield and dry matter. Increasing plant density led to a significant decrease in number of pods per plant, number of grains per pod and 100-grain weight. However, grain yield and dry matter increased firstly with increasing plant density and then decreased. Planting date and density had no significant effect on harvest index, while genotype of Greet produced a larger number of pods per plant, grain yield as well as final dry matter. Also Flip93-93 produced a bigger number of grains per pod, greater grain weight and harvest index. The maximum grain yield was obtained with genotype of Greet at the first planting date in 30 plants m-2 density. It could be concluded that due to thermal and drought stress occurring in late spring,, early planting of Greet genotype at 24-30 plants/m2 may lead to a suitable increase in grain yield.
P. Heydarizadeh, M. Sabzalian, M.r. Khajehpour,
Volume 12, Issue 45 (10-2008)
Abstract
During recent years, several genotypes have been selected from Isfahan land race Kouseh. The performance of safflower selected genotypes was studied in the field conditions, at Agriculture Research Station, Isfahan University of Technology during 2003. The experiment was carried out using a split plot arrangement according to a randomized complete block design with three replications. Planting dates (March 11, April 20, May 22 and June 23) were considered as the main plots and subplots consisted of 20 genotypes of safflower including 19 selections from Kouseh and Arak-2811 genotype. Days from planting to emergence and emergence to stem elongation were reduced as planting was delayed until the fourth planting date. Days from stem elongation to head visible was reduced with delay from the first to the third planting date, and then increased. Days from head visible to 50% flowering was reduced with delay from the first date to the third planting date, but increased in the fourth planting date. Days from 50 percent flowering to physiological maturity was increased with delay in planting. Days from planting to emergence, emergence to stem elongation, stem elongation to head visible and 50 percent flowering to physiological maturity were not influenced by genotypes. Genotype DP7 had the highest and genotype C111 and genotype DP25 had the lowest days from head visible to 50% flowering. The interaction between planting date and genotype in regard to days from stem elongation to head visible was also significant. Seed weight per plant was reduced with delay in planting date. Genotype ISF66 had the highest and genotype Arak-2811 had lowest seed weight per plant. The number of days from emergence to head visible in ISF66, DP5, C128 and Arak-2811 was affected by maximum temperature (Tmax), in genotype DP7 by Tmax2, in genotypes DP17, DP1 and C41100 by Tmin2 and in genotypes DP9, DP25, ISF28, ISF22, and C111 was affected by day length. It seems that development period from emergence to head visible was affected by temperature in the most genotypes. On March 11 planting date, genotypes had the maximum response to temperature and day length and the minimum response was observed in the fourth planting date. The genotype ISF66 had the highest seed yield on March 11 planting date. The result of this study showed that safflower should be planted in late March under condition similar to this experiment for maximum yield production.
A Karimi, M Noshadi, M Ahmadzadeh,
Volume 12, Issue 46 (1-2009)
Abstract
In this research the effect of Super Absorbent Polymer (SAP) on the crop growth, wilting point, sunflower survival, water holding capacity, and irrigation interval was investigated. The experiment was conducted with different concentrations of absorbent hydrogel (Igeta): 0% (control treatment), 0.05%, 0.1%, 0.2%, and 0.3% (w/w). The soil textures were sand, loam, and clay. The experiment was a completely randomized design with three replications. The results of this research are: 1- Adding of Igeta to the soil changed solid, liquid, and gas phases. Application of 0.05%, 0.1%, 0.2%, and 0.3% (w/w) of Igeta increased the volume of clay, loam and sand soils between 10-40% , 5-32% and 9-37%, respectively. 2- With application of Igeta, absorption of nutrients (N, P, and K) was increased. Maximum absorption nutrients occurred at the level of 0.05%, 0.1%, and 0.3% with confidence level of 90% for clay, loam, and sandy soils, respectively. 3- Igeta increased water holding capacity and irrigation intervals. Increasing in irrigation interval was between 30-130% in clay, 60-120% in loam, and 150-300% in sandy soils. Water saving in clay, loam, and sandy soils was 30%, 40%, and 70%, respectively. 4- at the level of 0.3% Igeta, starting time of temporary wilting point was delayed from 4 to 10 days (150%) in clay and loam soils, and from 4 to 12 days (200%) in sandy soil. The starting time of permanent wilting point was delayed from 8 to 12 days (50%) in clay, 7 to 12 days (71.4%) in loam, and 9 to 14 (55.5%) days in sandy soils. Therefore, application of Igeta delayed starting time of permanent wilting point between 50-71% and temporary wilting point between 150-200%.
F Valimohamadi, M Tajbakhsh, A Saeed,
Volume 12, Issue 46 (1-2009)
Abstract
In order to evaluate effect of planting date and plant density on grain yield, yield components and some quality and morphological traits of chickpea (Cicer arietinum L.), an experiment was conducted at the research center of agricultural and natural resources of west Azerbaijan in Urmia rain-fed research farm during 2005-2006 growing season in a split plot arrangement, based on a completely randomized block design with four replications. The cultivar of chickpea (Qazvin local mass) was planted in three sowing dates (mid November, mid March and mid April) in main plots, and four plant densities (intra row space: 7.5, 10, 15 and 20 cm) representing (45, 34, 23 and 17 plant/m2) in sub plots. Yield, number of pod per plant, seed protein content, plant height, number of secondary branches and 100 seed weight were evaluated. Results indicated that date of sowing had a significant effect on the yield, number of pod per plant and seed protein content but was not significant for plant height, secondary branches and 100 seed weight. Highest number of pod per plant was obtained in mid November sowing (37.69) and high protein content (22.63) in mid March. Different plant density effects were also not significant on yield, plant height, secondary branches and 100 seed weight but the effect of density on the number of pod per plant and seed protein content was significant. Highest number of pod per plant was obtained in the third density (31.5), and highest protein content in the first density (22.31). The results of study indicated that between mid March planting in the density (45 plant/m2) had highest yield (1042.08kg/ha) and protein content compared with the other planting dates.
